-
CDA HE6050 - page 1
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu he6050ss electric hob Manual for Installation, Use and Maintenance ...
-
CDA HE6050 - page 2
2 Contents: 3 Important 5 Important Notes 6 Using Y our Hob 8 Ecient Use Of Y our Hob 9 Care And Maintenance 11 Fitting The Hob 12 How T o Install The Hob 14 Mains Electricity Connection ...
-
CDA HE6050 - page 3
3 Important The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CD A reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance or use in a commercial environment. This appliance is no ...
-
CDA HE6050 - page 4
4 CE Declarations of Conformity: This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical safety (L VD) and Electromagnetic interference compatibility (EMC). P arts intended to come into contact with food conform to EEC/89/109 . IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF ...
-
CDA HE6050 - page 5
5 Important Notes • Please note: • Electric hobs become hot and remain hot during and immediately after use. Do not touch the hob until it has been allowed to cool. • K eep children away from the appliance when in use. • Never use the hob top for storage. • Pan handles should never stand out beyond the ...
-
CDA HE6050 - page 6
6 Using Y our Hob HO TPLA TE SWITCHES: The power of each hotplate can be varied using the control knob to select the required heat. The table below shows the heat at each of the 6 settings: 5 6 7 8 9 Heat setting Description 1 V ery gentle 2 Gentle 3 Slow 4 Medium 5 High 6 V ery high Fig. 1 1 2 3 4 Electric hotplates: 1. 180mm (FL) 1.5k W 2. 145mm ...
-
CDA HE6050 - page 7
7 The ‘OFF’ position is indicated by the symbol ‘O’ . The indicator will light when the hotplate is in use. When you have finished cooking, check to ensure that the hotplates are o and the indicator is not lit. Before using your hob for the rst time, switch the hotplates on for a FEW SECONDS to burn o any grease left over from the ...
-
CDA HE6050 - page 8
8 Ecient Use Of Y our Hob The hob is equipped with hotplates of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate hotplate depending on the size of the pan. The most ecient use of the hob is shown below , where the pan and hotplate are correctly ...
-
CDA HE6050 - page 9
9 Care and Maintenance The hob has a stainless steel surface, you should use a non-abrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings. Stainless steel can be eectively cleaned by simply using a dilute solution of water and washing up liquid and drying to a shine with a cle ...
-
CDA HE6050 - page 10
10 IF Y OUR HOB IS NOT W ORKING: 1. Check that the mains supply has not been switched o . 2. Check that the fuse or circuit breaker has not blown/tripped. ...
-
CDA HE6050 - page 11
11 Fitting The Hob Unpacking the hob: • T ake care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 150mm away from any adjacent vertical surfaces, e.g. a tall cupboard end panel. This may be reduced to 125mm if the adjacent surface is res ...
-
CDA HE6050 - page 12
12 Notes: • Do not position this appliance above a refrigeration unit. The heat generated may cause the unit to fail. • This appliance is designed to be installed into cabinet units capable of withstanding temperatures of 65°C above ambient or greater (typically 80-90°C). • If the hob is to be installed above a ...
-
CDA HE6050 - page 13
13 Fig.3 Fig.4 Fig.5 Fig. 6 185mm 185mm >61.5mm 560cm >165mm >165mm 557mm 477mm >600mm 3cm 4cm ...
-
CDA HE6050 - page 14
14 Mains Electricity Connection W arning! this appliance must be earthed W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. T . and local regulations. This appliance is intended to be connected to x ed wiring and is not suitable for connection to a 13A ...
-
CDA HE6050 - page 15
15 Hotplate Size Nominal Rating (k W) 180mm 1.5 145mm 1 .0 180mm Rapid 2 .0 145mm Rapid 1.5 • When installing this product we recommend you seek the help of another individual. TECHNICAL D A T A: The table opposite shows the rated output of each hotplate: Mains electrical voltage: 230 - 240V ac, 50Hz T otal rated electrical input: 6. 0k ...
-
CDA HE6050 - page 16
Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu ...
CDA HE6050についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもCDA HE6050の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCDA HE6050で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。