Honeywell HD4Uの取扱説明書

32ページ 0.49 mb
ダウンロード

ページに移動 of 32

Summary
  • Honeywell HD4U - page 1

    Document 800-00031 – Rev A – 04/08 Day/Night Ultra Wide Dynamic Fixed Dome Camera User Guide NTSC / P AL HD4U HD4UX ...

  • Honeywell HD4U - page 2

    2 Revisions Issue Date Revisions A 04/08 New document. ...

  • Honeywell HD4U - page 3

    Document 800-00031 Rev A 3 04/08 Wa r n i n g s Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. WARNING! 12 VDC/24 VAC models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standard ...

  • Honeywell HD4U - page 4

    4 FCC Compliance Statement Information to the User : This equipment has been tested and found to comply with the limits for a Class B digital de vice. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful in terference in a residential installation. This equipment generates, us es, and can ...

  • Honeywell HD4U - page 5

    Document 800-00031 Rev A 5 04/08 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Unpack Everything . . . . . . . . . . . . . . . . ...

  • Honeywell HD4U - page 6

    6 Introduction The unobtrusive, low-profile design of the HD 4U/X CCTV Camera is ideal for indoor and outdoor installations in comm ercial and residential venues. Before Y ou Begin Please read this guide carefully before you install the HD4U/X CCTV Camera. Keep this guide for future refe rence. Unpack Everything Check that the items received matc h ...

  • Honeywell HD4U - page 7

    Document 800-00031 Rev A 7 04/08 Equipment Required You will require the following tools to complete the installation: • Phillips screwdriver • Tools supplied in the hardware kit (three Allen keys: one each for t he security scre w on the lid, the conduit plug locking screw, and the l ens locking screw) •S i d e - c u t t e r s ...

  • Honeywell HD4U - page 8

    8 Installation The HD4U/X is weather-sealed for indoor or outd oo r locations. The HD4U/X is a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the ri sk of tampering. Mounting the Camera Th e H D 4 U / X C am e r a i s d e si g n e d t o be s u r f a c e m o u n t e d o n a w a l l o r c ei l i n g ...

  • Honeywell HD4U - page 9

    Document 800-00031 Rev A 9 04/08 Connecting Cables Through the Housing Base For installations that require pulling cables th rough the grommet located in the bottom of the base: 1. Use a sharp knife to cut an ! opening in the base gasket (see Figure 1 ). Be careful. The opening should be only big enough to feed the cable assembly through. 2. Pull t ...

  • Honeywell HD4U - page 10

    10 Connecting Cables Through the Side Conduit 1. Peel back the bottom flat gasket below the si de conduit just enough to expos e the security screw. 2. Use the supplied Allen key to loosen and remove the security screw (see Figure 2 ). 3. Use a flat screwdriver to unscrew the conduit p lug. 4. Pull the cables through the hole. 5. Apply appropriate ...

  • Honeywell HD4U - page 11

    Document 800-00031 Rev A 11 04/08 Electrical Box Installations Figure 3 i ll u st r at e s h o w to m ou n t t h e HD 4 U/ X di r ec t l y t o a 4S el e c tr i ca l b ox o r d i re c tl y t o w a ll o r ceiling. For 4S electrical box installations, you can use the supplied adapter plate to cover ceiling or wall imperfections aro und the el ectrical ...

  • Honeywell HD4U - page 12

    12 Figure 4 illustrates how to mount the HD4U/X directly to a double gang or single gang electrical box. Figure 4 Double Gang/Single Gang Electrica l Box Installation (Single Gang Shown) Electrical box (not supplied) HD4U/ X base Ceiling/wall Secure the HD4U/X base with screws appropriate t o your installation (not supplied) For surface mount insta ...

  • Honeywell HD4U - page 13

    Document 800-00031 Rev A 13 04/08 Connecting the Wiring Follow Figure 5 to connect the video and power wires. Figure 5 Wiring Connec tion Adjusting the Camera To adjust the HD4U/X Camera: 1. Apply 12 VDC or 24 VAC power to the camera and monitor the video signal. 2. Loosen the screws that lock th e gimbal assembly in place (see Figure 6 ). 3. Adjus ...

  • Honeywell HD4U - page 14

    14 Figure 6 Gimbal Adjustment Adjusting the Lens F ocus Lenses are pre-focused at the factory but may require a final adjustment after installation because the optical effect of the dome ma y cause a slight defocusing of the lens. TECH TIP! To check the focus, hold the dome over t he lens while making any adjustments. To adjust the camera direction ...

  • Honeywell HD4U - page 15

    Document 800-00031 Rev A 15 04/08 Camera Setup Camera F unctions OSD Menu Structure - Press d own on th e joysti ck and ho ld two sec onds to access the MAIN MENU. - Press down to enter a screen or sele ct a menu option. ! , " Move vertically to and between menus and options “ … ” indicates submenus To leave the screen and retu rn to the ...

  • Honeywell HD4U - page 16

    16 Configuring the WDR Presets Select the appropriate camera mode for t he lighting conditions. <CUSTOM> Opens the CUSTOM screen where you can adjust the limits of the wide dy namic range by moving the cursor. Note Watch the changes on the video monitor for the best results. >WDR LIMIT Adjust the dyna mic range to cha nge the camera’ s l ...

  • Honeywell HD4U - page 17

    Document 800-00031 Rev A 17 04/08 Optimizing the Camera Setup Note This menu is for advanced users only. The table below explains the options on the CAMERA S ETUP menu. Each selection on this menu takes you to a separate screen (see description below). <AES> The AES (Automatic Electronic Shutter) featur e compensates for excessive light level ...

  • Honeywell HD4U - page 18

    18 >SYNC Synchronize the vertical interval sync puls e of your camera with other equipment to reduce the effect of picture roll on the monitor. Select either: <INTERNAL> (default) for cameras using DC power or when line lock is not r equired, or <LINE LOCK> to open the Line Lock screen wher e you can adjust the Vertical Phase (V PHAS ...

  • Honeywell HD4U - page 19

    Document 800-00031 Rev A 19 04/08 Setting the Camera Image Properties The table below explains the options on the VI EWING menu. <ATW Xtnd> Automatic Tracking White Balance (Extende d Range). Continuously monitors the color temperature while an internal micro controller sets the white balance. Select this mode when the scene illumination vari ...

  • Honeywell HD4U - page 20

    20 >FLIP Select either: <ON> to reverse the image horizon tally on the video monitor , or <OFF> (default) > ID DISPLAY. Select ON to open the CAMERA ID SETUP screen where you can add a CAMERA ID (title) o f up to 8 chara cters. Move the cursor (>) to CAMERA ID , then press down on t he joystick. The fir st character appears. Pr ...

  • Honeywell HD4U - page 21

    Document 800-00031 Rev A 21 04/08 Setting the Day/Night Control The table below explains the options on the DAY/NIGHT SETUP menu. Note This setting is dependent on the AGC setting ( See >AGC on page 18). Note Certain video recorders require color carrier/burst to operate. >DAY/NIGHT SETUP Select either: <AUTO> (default) depending on lig ...

  • Honeywell HD4U - page 22

    22 Restoring Settings On the main MENU , sele ct RESTORE DEFAULTS , then YES followed by ENTER (middle button). This reloads the factory default camera settings. Caution This action replaces all custom setti ngs. > MENU CAMERA SETUP … VIEWING … WDR PRESE TS <Custom> DAY/NIGHT SETUP … VERSION … RESTORE DEFAULTS <YES> EXIT ...

  • Honeywell HD4U - page 23

    Document 800-00031 Rev A 23 04/08 Installing the Enclosure Cover To install the enclosure cover , use the Allen key (supplied) to secure the HD4U/X dome enclosure to the base wit h four #8-32 security scre ws. Figure 7 Enclosure Cover Installa tion Routine Maintenance Use regular liquid cleaners to remove dirt and grime from the HD4U/X dome. Cautio ...

  • Honeywell HD4U - page 24

    24 Solving Common T echnical Issues No Video ❐ ❐ ❐ Check that the power supply voltage is within the operating specificat ions for your camera model. See Specifications for details. Check the video signal connections are correct. Check for a loose connection . Fuzzy V ideo ❐ ❐ Check that the video ground connections. Check for ground loop ...

  • Honeywell HD4U - page 25

    Document 800-00031 Rev A 25 04/08 W arranty and Service Subject to the te rms and conditions listed on the Product warranty, during the warr anty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the event you have a problem wi th any Hone ywell product, please call Customer Ser ...

  • Honeywell HD4U - page 26

    26 Specifications Video Signal Specifications NTSC PAL Video Standard: 525 lines, 2:1 in terface 625 lines, 2:1 interface Scanning System: Progressive Image Sensor: 1/3 in. WDR digital image device Number of Pixels (H x V): 720 (H) x 540 (V) Dynamic Range: 102dB typical, 120dB max Day/Night Operation: Day: I n frared (IR) cut filter Night: No filte ...

  • Honeywell HD4U - page 27

    Document 800-00031 Rev A 27 04/08 Temperature: Operating: -13°F to +122°F (-25°C to +50°C) Storage: -4°F to +140°F (-20°C to +60°C) Mechanical Specifications Dimensions (D) x (H): 5.5 in. x 3.6 in.(140.2 mm x 91.5 mm) Weight: 2.5 lb. (1.1 kg) max Housing Construction: Diecast aluminum Housing Finish: Powder coated Video Output: BNC connecto ...

  • Honeywell HD4U - page 28

    28 Cable Guidelines Maximum Power Supply Cable Length (feet/met ers) Cameras With AC/DC P ower Supp lies Wire gauge Total load Power supply 24 AWG 22 AWG 18 AWG 16 AWG 3.5 W 15 VDC 200/6 1 325/9 9 826/252 1315/401 3.5 W 24 VAC 771/235 1512/461 3835/1169 6187/1886 Note Calculations are based on an unregulate d linear power supply, whi ch would be th ...

  • Honeywell HD4U - page 29

    Document 800-00031 Rev A 29 04/08 HD4U Mounting T e mplate ...

  • Honeywell HD4U - page 30

    30 ...

  • Honeywell HD4U - page 31

    Document 800-00031 Rev A 31 04/08 ...

  • Honeywell HD4U - page 32

    © 2008 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without wri tten permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. Howeve r, Honeywell Video Systems cannot as sume respon sibility for any consequences resulting ...

メーカー Honeywell カテゴリー Security Camera

Honeywell HD4Uのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HD4Uの取扱説明書
- Honeywellの製品カード
- パンフレット
- またはHoneywell HD4Uの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Honeywell HD4Uの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Honeywell HD4Uの取り付け説明書、サービスマニュアル、簡易説明書、またはHoneywell HD4Uのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Honeywell HD4Uの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Honeywell HD4Uデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHoneywell HD4Uを使用するのを助ける技術的文書のことです。説明書は通常、全てのHoneywell HD4Uユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Honeywellの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Honeywell HD4Uの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHoneywell HD4Uの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Honeywell HD4Uに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Honeywell HD4Uデバイスの基本機能を使うにあたってのヒント。 Honeywell HD4Uのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Honeywell HD4Uに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHoneywell HD4Uのメーカー/サービスへの連絡先に関する情報。

Honeywell HD4Uについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHoneywell HD4Uの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHoneywell HD4Uで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)