Mitsubishi FL7000Uの取扱説明書

17ページ 3.28 mb
ダウンロード

ページに移動 of 17

Summary
  • Mitsubishi FL7000U - page 1

    EN-1 LAN Contr ol Utility User Manual (for FL7000U) Contents Preparation/SetUp ......................................................................... 2 Preparation befor e using the network function ........................................... 2 Connection ........................................................................................... ...

  • Mitsubishi FL7000U - page 2

    EN-2 Pr eparation/SetUp Preparation befor e using the network function This projector is equipped with the network function to contr ol and monitor the projector’ s operations using a W eb browser and to send e-mail notifi cation. Before using the network function, perform the following thr ee preparation steps. (1) Setup of the application soft ...

  • Mitsubishi FL7000U - page 3

    EN-3 1 Copy three fi les (DI_4.1.3.3.msi, Setup.Exe, and Setup.Ini) contained in the T ools folder of CD-ROM to the hard disk of your personal computer . 2 Double-click the fi le named Setup.Exe. 3 When the following window appears, click Next. Installation Before starting installation, be sur e to read “ReadMe.txt” contained in the CD-ROM. C ...

  • Mitsubishi FL7000U - page 4

    EN-4 Preparation/SetUp (continued) 4 Select a folder to install the program, and click Next. 5 Click Next. 6 Installation starts. • The pr ogress of the installation process is displayed as shown on the right. 7 When the installation process is completed, click Close. How to remove Pr ojector -Control Device Installer Select [Start] - [Control Pa ...

  • Mitsubishi FL7000U - page 5

    EN-5 1 Start the Projector -Control Device Installer . • Select [Start] - [All Pr ograms] - [Projector] - [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Click the Search button. • Projector is r ecognized. (Note) When projector isn’ t recognized, check the following. • The fi rewall function has been disabled. (Whe ...

  • Mitsubishi FL7000U - page 6

    EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. • Check that the options are marked with check- marks as shown on the right. Keep them un- changed for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP address. When using a DHCP server Preparation/SetUp (continued) ...

  • Mitsubishi FL7000U - page 7

    EN-7 5 Select [Assign a specifi c IP addr ess] and click Next. 6 Enter a fi xed IP addr ess (for example, 192.168.0.1) and click Next. (Note) Do not use 0 or 255 for the last digit of the IP address. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP address you set. (Note) When using the error/alert e-mail notifi cation ...

  • Mitsubishi FL7000U - page 8

    EN-8 1 Start the Projector -Control Device Installer . • Select [Start] - [All Pr ograms] - [Projector] - [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structur e until the IP address you set appears. 3 Click the T elnet Confi guration tab. 4 Select the Connect tab ...

  • Mitsubishi FL7000U - page 9

    EN-9 1 Enter “0” and press the Enter key . 2 Input the old (current) passwor d and press the Enter key . (Default password is admin.) • If you input a wrong passwor d, an error message appears and the setting menu is displayed again. In this case, set the password again. • If you for get your password, select “7 factory defaults,” input ...

  • Mitsubishi FL7000U - page 10

    EN-10 1 Enter “3” and press the Enter key . 2 T o enable the e-mail notifi cation function of Projector - View , enter 1 and press the Enter key . (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Contr olled Mode) Preparation/SetUp (continued) 1 Enter “1” and press the Enter key . 2 Enter ? ...

  • Mitsubishi FL7000U - page 11

    EN-11 1 Enter “9” and press the Enter key . 2 The setting screen is shaded and the setting is updated. • It takes about 10 seconds for the setting to be updated. Don’t perform communication during this period. Save and exit • Because the password, display language, LAN contr ol, and PJLink ™ certifi cation are set using the telnet func ...

  • Mitsubishi FL7000U - page 12

    EN-12 1 Start the Projector -Control Device Installer . • Select [Start] - [All Pr ograms] - [Projector] - [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structur e on the left pane until the IP address you set appears. 3 Select the WEB Confi guration tab. 4 Click the External Browser button or Go button. ...

  • Mitsubishi FL7000U - page 13

    EN-13 5 The passwor d input screen appears. Enter the password you set. • The default password is admin. (Note) If you input a wrong password three successive times, the W eb browser is closed. In this case, r epeat from step 1. 6 The ProjectorView main scr een appears. • Some buttons may not be displayed. In this case, select [Start] - [Contro ...

  • Mitsubishi FL7000U - page 14

    EN-14 ProjectorView (continued) VIRTUAL REMOTE contr oller Put a checkmark in the box of the Virtual remote enabled on the Pr ojectorView main screen, and click the VIRTUAL REMOTE button. The following Virtual Remote window appears. For the functional descriptions of each button, see the user manual of the projector . E-mail notifi cation function ...

  • Mitsubishi FL7000U - page 15

    EN-15 Initial setting T o load information on the pr ojector such as model name and lamp operating time, set the pr ojector data in advance. Click the SETUP button on the ProjectorView main scr een. The Projector Setup screen appears. Enter data according to the description of each setting item. (Note) • Y ou can’t change the Projector model, S ...

  • Mitsubishi FL7000U - page 16

    EN-16 Support for the PJLink™ function This projector supports standar d protocol PJLink ™ for projector contr ol and you can control and monitor pr ojector’ s operations using the same application among projectors of dif ferent models and differ ent manufacturers. T o use this function, set the PJLink™ certifi cation properly according to ...

  • Mitsubishi FL7000U - page 17

    EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during contr ol using the network function may cause ProjectorView to fail to display data correctly . • The operating time and temperature may not be displayed corr ectly . In this case, close the browser , recognize this projector using Pr ojector -Control Device Installer , a ...

メーカー Mitsubishi カテゴリー Projector

Mitsubishi FL7000Uのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FL7000Uの取扱説明書
- Mitsubishiの製品カード
- パンフレット
- またはMitsubishi FL7000Uの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mitsubishi FL7000Uの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mitsubishi FL7000Uの取り付け説明書、サービスマニュアル、簡易説明書、またはMitsubishi FL7000Uのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mitsubishi FL7000Uの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mitsubishi FL7000Uデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMitsubishi FL7000Uを使用するのを助ける技術的文書のことです。説明書は通常、全てのMitsubishi FL7000Uユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mitsubishiの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mitsubishi FL7000Uの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMitsubishi FL7000Uの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mitsubishi FL7000Uに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mitsubishi FL7000Uデバイスの基本機能を使うにあたってのヒント。 Mitsubishi FL7000Uのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mitsubishi FL7000Uに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMitsubishi FL7000Uのメーカー/サービスへの連絡先に関する情報。

Mitsubishi FL7000Uについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMitsubishi FL7000Uの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitsubishi FL7000Uで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)