ページに移動 of 60
D-Link Air Plus DWL-650+ 2.4 GHz Wireless Cardbus Adapter Manual Building Netw orks for People ...
2 Contents 1. Package Contents ....................................................... 3 2. Introduction .................................................................. 4 3. Wireless Basics ........................................................... 6 4. Getting S tarted ............................................................. 9 5. Installi ...
3 1. P ac kage Contents Contents of Package: • D-Link Air Plus DWL-650+ 2.4GHz Wireless Cardbus Adapter • Manual, QIG, and Drivers on CD • Printed Quick Installation Guide If any of the above items are missing, please contact your reseller. System Requirements: • A laptop computer with an available 32-bit Cardbus PC Card slot • Windows X ...
4 2. Intr oduction The D-Link Air Plus DWL-650+ Wireless Cardbus Adapter is an enhanced 802.11b high-performance, wireless adapter that supports high-speed wireless networking at home, at work or in public places. Unlike most 802.11b network cards, the DWL-650+ provides speeds of up to 22 Mbps * (compared to the standard 11 Mbps) when used with oth ...
5 Features and Benefits • Supports 802.1x authentication security • Now even faster performance with the new 4x feature, when used with 4x -enabled DI-614+ or 4x -enabled DWL-900AP+ • Speeds up to 2x faster, with data transfer rates up to 22Mbps, when used with other D-Link Air Plus products • Operates in the 2.4GHz frequency range • Maxi ...
6 3. W ir eless Basics D-Link Air Plus wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or wherever a wireless net work is available. Strictly adhering to the IEEE standard, the D-Link Air Plus wireless family of products will allow you to access the ...
7 Wireless Basics Network Expansion - Wireless technology allows the network to go where wires cannot go. Reduced Cost-of-Ownership - While the initial investment required for Wireless LAN hardware might be higher than the cost of wired LAN hardware, overall installation expens es and life-cycle costs will be significantly lower. Long-term cost ben ...
8 Installation Considerations Designed to go up to 1,312 feet (400 meters) outdoors and up to 328 feet (100 meters) indoors, the D-Link Air Plus DWL-650+ lets you access your network with your laptop computer fr om virtually anywhere. Keep in mind, however, that the number, thickness and location of walls, ceiling s or other objects that the wirele ...
9 Wireless Basics For the average home, signal range should not be an issue. If you experience low or no signal strength in areas of your home that you wish to access, consider positioning the Access Po int in a location directly between the computers with wireless adapters. Additional Access Points can be connected to provide better coverage in ro ...
10 Getting Started Setting Up an Infrastructure Network Please remember that D-Link Air Plus wireless devices are pre-configured to connect together, right out of the box, with the default settings. If you are using the 802.1x protocol in your network, your setup may be different than that pictured above. Please refer to the manual that came with y ...
11 Getting Started Setting up a Wireless Ad Hoc Network IP Address Install the D-Link Air Plus DWL-520+ wireless network adapter into the desktop computer. See the Quick Installation Guide included with the product for installation instructions . Install the DWL-650+ into a laptop computer. See the Quic k Installation Guide included with the produc ...
12 5. Installing the D WL-650+ Installing the DWL-650+ Drivers & Utility NOTE: Do not insert the DWL-650+ Cardbus into the Cardbus slot at this point. You will be instructed in Section 2 to install the DWL-650+ Cardbus adapter. Windows XP, 2000, Me, or 98 Installation: The following screen shots are taken from Windows XP . Windows 2000, Me, and ...
13 Installing the DWL-650+ Drivers and Utility If the AutoRun function on your laptop computer does not automatically start, proceed to the steps below. If it does, proceed to Section 2. • Go to Start > Run > type D:Setup.exe • Click OK NOTE: The letter “D” represents the letter of the CD-ROM drive. Your CD-ROM drive may be a differe ...
14 Installing the DWL-650+ Drivers and Utility • Select No, I will restart my computer later. • Click Finish • Shut down your laptop computer. • Insert the DWL-650+ into the Cardbus slot. • Restart your laptop computer • Click Nex t at the Welcome screen (Fig. 5.2.4) Fig. 5.2.3 Fig. 5.2.4 The InstallShield W izard has succ essfully inst ...
15 Installing the DWL-650+ For Windows 2000 , Fig. 5.2.6 may appear after the laptop computer restarts. Select Yes to finalize the installation. For Windows Me and 98 , after the laptop computer restarts, it will ask you to reboot the computer once more to finalize the driver installation. Select Yes to finalize the installation. YOU HAVE COMPLETED ...
16 Configuration Utility Link Info After clicking on the Confi guration Utility icon, the Link Info screen will display the following: Status: Displays the MAC Address of the Acce ss P oint that is associated with the DWL-650+. SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default ...
17 Configuration Utility Configuration SSID - (Service Set Identifier) is a nam e that identifies a wireless network. Access Points and wirele ss clients attempting to co nnect to a specific WLAN (W ireless Local Area Network) must use the same SSID. The default setting is default . Wireless Mode - Click on the pull-down menu; select from the follo ...
18 Configuration Utility Encryption Please note that all devices must share the same Encryption settings to communicate on the network. Data Encryption – enable Encryption by clicking on the box. The DWL- 650+ has Encryption disabled as the default setting. Authentication mode – choose one of the following modes: Open Authentication – communi ...
19 Configuration Utility Site Survey Available Networks The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profiles In the lower half of the screen, you can manage the profiles that you h ave created for the wireless network ...
20 Configuration Utility Properties In this window you can configure all the prope rties of a profile in order to connect with a network of your choice. After you have entered your c hanges in this window, click OK t o s a v e t h e changes. Current Setting Current Setting/Default Setting default Fig. 6.7 ...
21 Configuration Utility About The ABOUT screen gives you information about the F irmware an d Utility Versions of the DWL-650+. Fig. 6.8 D-Link Air Plus Configuration Utility D-Link Air Plus DWL-650+ 2.4GHz Wireless Cardbus Adapter DWL-650+ ...
22 7. T r oubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWL-650+ Wireless Adapter. Read the following descriptions if you are having problem s. (The exampl es bel ow are illustrated in Windows XP. If you have another ope rating system, these solutions will still apply although ...
23 Troubleshooting • Double-click on Network Adapters • Right-click on D-Link Air Plus DWL-650+ Wireless Adapter • Select Properties to check that the drivers are installed properly. • Look under Device Status to check that the device is working properly. • Click OK D-Link Air Plus DW L-650+ Wireless Cardbus Adapter D-Link Air Plus DWL-65 ...
24 Troubleshooting 2. I cannot connect to the access point or the wireless router. • Make sure that the SSID on the DWL-650+ Cardbus adapter is exactly the same as the SSID on the Access Point or wireless router. • Move the DWL-650+ and Access Point or Wireless router into the same room and then test the wireless connection. • Disable all sec ...
25 C. Search for the files TIACXLN.INF and TIACXLN.SYS . Remove these files from the INF and SYSTE M32 (DRIVERS) folders in the Windows directory. Note: Windows XP and Windows 2000 will rename .inf files that have not received WHQL certification into oem.inf files (e.g., oem1.inf.) 6. The computer with the DWL-650+ installed is unable to connect to ...
26 that the key selected is set to the same key as other devices on the network. 7. How can I troubleshoot distance issues using the DWL-650+. • Move the DWL-650+ and Access Point or Wireless router into the same room and then test the wireless connection. • Change the channel of the Access Point. • Move devices within the line of sight 8. Ho ...
27 Networking Basics Using the Network Setup Wizard in Windows XP Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the Internet through a gateway/router, select the second option as shown. Click Next Fig. 8.2 Fig. 8.3 ...
28 Networking Basics Enter a Computer description and a Computer name. Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next Fig. 8.4 Fig. 8.5 ...
29 Networking Basics Please wait while the wizard applies the changes. When the changes are complete, click Next . Please wait while the wizard configures the computer. This may take a few minutes. Fig. 8.6 Fig. 8.7 ...
30 Networking Basics In the window below, select the best option. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next . Insert a disk into the Floppy Disk Drive, in this case drive A: Format the disk if you wish, and click Next. Fig. 8.8 Fig. 8.9 ...
31 Networking Basics Please wait while the wizard copies the files. Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue, click Next Fig. 8.10 Fig. 8.11 ...
32 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on yo ...
33 Networking Basics Naming your Computer To name your computer, please follow these directions: In Windows XP : • Click Start (in the lower left corner of the screen) • Right-click on My Computer • Select Properties and click • Select the Computer Name Tab in the System Properties window. You may enter a Computer description if you wish; t ...
34 Networking Basics Naming your Computer Checking the IP Address in Windows XP/2000 Go to Start > All Programs > Accessories > Command Prompt • In this window, enter the Computer name . • Select Workgroup and enter the name of the Workgroup . • All computers on your network must have the same Workgroup name. • Click OK Fig. 8.16 F ...
35 Networking Basics Checking the IP Address in Windows XP/2000 Type Command Type ipconfig /all at the prompt . All the configuration settings are displayed as shown below. Type ipconfig /renew at the prompt to get a new IP Address, shown below. ( Windows 98/ME users: go to Start > Run . Type Command . Type winipcfg at the prompt. Click Release ...
36 Networking Basics Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology . If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If yo ...
37 Networking Basics Assigning a Static IP Address (continued) • Right-click on Local Area Connections. • Click Properties • Highlight Internet Protocol (TCP/IP) • Click Properties D-Link AirPlus DWL-650+ Wireless Adapt er Fig. 8.23 Fig. 8.24 ...
38 Networking Basics Assigning a Static IP Address (continued) • Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window. • Inpu t your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 1 92.168.0.2, the other computers s ...
39 Checking the Wireless Connection by Pinging For Windows XP and 2000: Go to Start > Run > type cmd . A window similar to Fig. 8.35 will appear. Type ping xxx.xxx.xxx.xxx , where xxx is the IP address of the Wireless Router or Access Point. A good wireless connection will show four replies from the wireless router or access point, as shown. ...
40 Adding and Sharing Printers in Windows XP After you have run the Network Setup Wizard on all the computers in your network (please see the Network Setup Wizard section at the beginning of Networking Basics ,) you can use the Add Printer Wizard to add or share a printer on your network. Whether you want to add a local printer (a printer connected ...
41 Networking Basics Adding a local printer (A printer connected directly to a computer) A printer that is not shared on the network and is connected directly to one computer is called a local printer . If you do not need to share your printer on a network, follow these directions to add the printer to one computer. • Go to Start > Printers an ...
42 Networking Basics Adding a local printer • Click Next • Select Local printer attached to this computer • (Deselect Automaticall y detect and install my Plug and Play printer if it has been selected.) • Click Next • Select Use the following port: • From the pull-down menu select the correct port for your printer (Most computers use th ...
43 Networking Basics Adding a local printer • Select and highlight the correct driver for your printer. • Click Next (If the correct driver is no t displayed, insert the CD o r floppy disk that came with you r p rinter and click Have Disk .) • A t this screen, you can change the name of the printer (optional.) • Click Next • Select Yes , ...
44 Networking Basics Adding a local printer Click Finish Click OK This screen g ives y ou information about y our p rinter. When the test page has printed, Fig. 8.36 Fig. 8.37 ...
45 Networking Basics Adding a local printer Setting up a Network Printer After you have run the Network Setup Wizard on all the computers on your network, you can run the Add Printer Wizard on all the computers on your network. Please follow these directions to use the Add Printer Wizard to share the printer on your network: • Go to Start > Pr ...
46 Networking Basics Setting up a network printer • Click on Add a Printer • Click Next • Select Network Printer • Click Next Fig. 8.40 Fig. 8.41 Fig. 8.42 ...
47 Networking Basics Setting up a network printer • Select the printer you would like to share. • Click Next • Click Finish Fig. 8.43 Fig. 8.44 Fig. 8.45 • Select Browse for a printer • Click Next ...
48 Networking Basics Setting up a network printer To check for proper installation: • Go to Start > Printers and Faxes The printer icon will appear at right, indicating proper installation. You have completed adding the printer. To share this printer on your network: • Remember the printer name • Run the Add Printer Wizard on all the compu ...
49 Networking Basics Setting up an LPR printer To share an LPR printer (using a print server,) you will need a Print Server such as the DP-101P+. Please make sure that you have run the Network Setup Wizard on all the computers on your network. To share an LPR printer , please follow these directions: • Go to Start > Printers and Faxes • Clic ...
50 Networking Basics Setting up an LPR printer • Select Create a new port • From the pull-down menu, select Standard TCP/IP Port , as shown. • Click Next • Please read the instructions on this screen. • Click Next • Enter the Printer IP Address and the Port Name , as shown. • Click Next Fig. 8.50 Fig. 8.51 Fig. 8.52 ...
51 Networking Basics Setting up an LPR printer • In this screen, select Custom. • Click Settings • Enter the Port Name and the Printer Name or IP Address . • Select LPR • Enter a Queue Name. If there is more than one port on the print server, you must name the Queue . • Click OK Fig. 8.53 Fig. 8.54 ...
52 Networking Basics Setting up an LPR printer • This screen will show you information about your printer. • Click Finish • Select the printer you are adding from the list of Printers . • Insert the printer driver disk that came with your printer. • Click Have Disk If the printer driver is already installed, • Select Keep existing drive ...
53 Networking Basics Setting up an LPR printer • You can rename your printer if you choose. It is optional. Please remember the na me o f your printer. You will need this information when you use the A dd Printer Wizard on the other computers on you r network. • Click Next • Select Yes , to print a test page. • Click Next This screen will d ...
54 Networking Basics Other Tasks For help with other tasks in home or small office networking, see Using the Shared Documents folder and Sharing files and folders in the Help and Support Center in Microsoft Windows XP. 9. T echnical Specifica tions Standards: • IEEE 802.11b • Wi-Fi Certified Adapter Type : • PC Cardbus slot System Requirement ...
55 • Outdoors – up to 1,312 feet (400 meters) Diagnostic LED: • Power – solid green light indicates power connection • Link/Activity – green solid/blinking light indicates Link/Activity Power Specifications: • Operating Voltage: 3.3V Network Architecture: • Supports Ad-Hoc Mode (Peer-to-Peer wi thout Access Point) or Infrastructure ...
56 • CE Safety: UL 10. Contacting T echnical Suppor t You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support ...
57 11. Limited W a r r anty Subject to the terms and conditions set forth he rein, D- Link Systems, Inc. (“D-Link”) provides this L imited warranty for its product only to the person or ent ity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered within the fif ...
58 • The original product owner must obtain a Return Material Authori zation (“RMA”) number from the Authorized D-Link Service Office and, if reques ted, provide written proof of purchase of the product (such as a copy of the dated purchase inv oic e for the product) before the w arranty service is provided. • After an RMA number is issued, ...
59 Trademarks: D-Link is a registered trademark of D-Link Sy stems, Inc. Other trademarks or registered trademarks are the property of their re spective manufacturers or owners. Copyright Statement: No part o f this publication or documentation accompanying this Product m ay be reproduced in any form or by any means or used to make any derivative s ...
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. ...
D-Link dwl-650のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- dwl-650の取扱説明書
- D-Linkの製品カード
- パンフレット
- またはD-Link dwl-650の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、D-Link dwl-650の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、D-Link dwl-650の取り付け説明書、サービスマニュアル、簡易説明書、またはD-Link dwl-650のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、D-Link dwl-650の製品を使用するにあたって最も人気のある説明書を閲覧できます。
D-Link dwl-650デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがD-Link dwl-650を使用するのを助ける技術的文書のことです。説明書は通常、全てのD-Link dwl-650ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
D-Linkの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. D-Link dwl-650の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははD-Link dwl-650の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。D-Link dwl-650に関してこのドキュメントで見つけることができる全てのヒントの目次
3. D-Link dwl-650デバイスの基本機能を使うにあたってのヒント。 D-Link dwl-650のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。D-Link dwl-650に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるD-Link dwl-650のメーカー/サービスへの連絡先に関する情報。
D-Link dwl-650についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもD-Link dwl-650の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがD-Link dwl-650で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。