Optibase MGW 2000eの取扱説明書

28ページ 0.42 mb
ダウンロード

ページに移動 of 28

Summary
  • Optibase MGW 2000e - page 1

    MGW 2000e MPEG-2 Video Streaming Server (V ersion 4.0) Quick S t art Guide ...

  • Optibase MGW 2000e - page 2

    Trademarks Optibase and VideoPlex are trademarks of Optibas e Inc. Microsoft, MS, and MS-DOS, Activ eMovie, Windows, Windows 2000 and Windows XP are trademarks of Microsoft Corporation . IBM PC, XT, AT are r egistered trademarks of International Busin ess Machine Corporation. All other trademarks m entioned in this m anual are the so le property of ...

  • Optibase MGW 2000e - page 3

    Safety Instructions Use the following safety guidelines to help protect your MGW 2000e unit from potential dam age and to ensure your own personal safety. When using MGW 2000e As you operate MGW 2000e, observe the following safety guidelines Note Do not open the MGW 2000e unit, as this will void your warranty. MGW 2000e does not contain any user se ...

  • Optibase MGW 2000e - page 4

    • Keep your MGW 2000e unit away from radiators and heat sources. Also, do not block c ooling vents. Avoid placing loose papers underneath your MGW 2000e unit. Do not place your MGW 2000e unit in a closed-in wall unit or on a bed, sofa, or rug. • When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable it ...

  • Optibase MGW 2000e - page 5

    ...

  • Optibase MGW 2000e - page 6

    ...

  • Optibase MGW 2000e - page 7

    MGW 2000e Overview MGW 2000e transmits multiple ch annels of live TV and video over IP networks. It can receive up to six live analog signals, encode them in real-time to MPEG-1 or MPEG-2 and then stream them over an IP network in multicast or unicast mode. With MGW 2000e, organizations can utilize their IP networks for business TV, training and co ...

  • Optibase MGW 2000e - page 8

    MGW 2000e Quick Start Guide 2 MGW 2000e Components Chassis Components Description MGW 2000e chassis ‘Housing’ of the MGW 2000e system. Power cord that fits your local Din socket. Connects to MGW 2000e's power connector (not supplied by Optiba se) . Network cables - shielded category 5 Connect MGW 2000e's NICs A and B to two different ...

  • Optibase MGW 2000e - page 9

    MGW 2000e Quick Start Guide 3 Getting Started This section describes how to unpack and initialize MGW 2000e. It instructs you on encoding and tr ansmitting a UDP stream under default conditions by using one encodin g module and MGW 2000e Director. For instructions on encoding and transmitting RTP streams, refer to the user manual. Unpacking MGW 200 ...

  • Optibase MGW 2000e - page 10

    MGW 2000e Quick Start Guide 4 Installing an Encodi ng Module in MGW 2000e Before you start operating MGW 2000e, you have to install one of the encoding modules listed in Table 1. For instructions on installing encoding m odules, refer to chapter 2 in the user manual. For tables showing where to connect sources, refer to page 17. User Authorization ...

  • Optibase MGW 2000e - page 11

    MGW 2000e Quick Start Guide 5 Initial Configuration To operate MGW 2000e for the fi rst time, you have to initialize MGW 2000e using HyperTermi nal, which is pre-installed on the Configuration PC. The Configuration PC must have at least one free serial port. To enable the Configuration PC to communicate with MGW 2000e, you have to first add a di re ...

  • Optibase MGW 2000e - page 12

    MGW 2000e Quick Start Guide 6 To add the required connections: 1. Insert the MGW 2000e CD and navigate to the HyperTerminal Settings folder. 2. Copy rasphone.pbk to C:Documents and SettingsAll UsersApplication DataMicrosoftNetworkConnectionsPbk on your PC. If Windows is not installed on C , specify the correct drive. 3. Restart your PC; the ...

  • Optibase MGW 2000e - page 13

    MGW 2000e Quick Start Guide 7 To change MGW 2000e’s hostname: 1. To avoid network conflicts, make sure that there are no other network devices with the name you want to use. 2. Press 1 (Rename MGW 2000e) ; you will be asked to confirm your request to ch ange MGW 2000e’s hostname. 3. Press Y to confirm the request. 4. Type the new hostname for M ...

  • Optibase MGW 2000e - page 14

    MGW 2000e Quick Start Guide 8 If your Network is not DHCP enabled If your network is not DHCP enabled, you must define TCP/IP settings for NIC A upon logging on for t he first time. The following section instructs you on how to define TCP/IP settings. To define TCP/IP settings: 1. In the Main menu, press 2 (Change Network Settings) ; the Network me ...

  • Optibase MGW 2000e - page 15

    MGW 2000e Quick Start Guide 9 To display TCP/IP settings: 1. To display MGW 2000e’s TCP/IP settings, re-open the HyperTerminal connection and log on again as Administrator , the Main menu appears. 2. Type 3 (Display TCP/IP Settings) ; the TCP/IP settings are displayed. 3. To return to the Main menu, press any key. To log off MGW 2000e: 1. In the ...

  • Optibase MGW 2000e - page 16

    MGW 2000e Quick Start Guide 10 Transmitting Streams The following chapters show you how to operate MGW 2000e using MGW 2000e Director. Logging on to MGW 2000e Director 1. Open Microsoft Internet Explorer from any computer on the network. 2. In the URL field, enter MGW 2000e’s hostname or IP address. Internet Explorer’s URL field will read somet ...

  • Optibase MGW 2000e - page 17

    MGW 2000e Quick Start Guide 11 Configuring a Live Channel To access the Channels page, choose Channels in MGW 2000e Director’s menu. The Channels page displays a lis t of the available live channels corresponding to the number of encoding m odules installed in the MGW 2000e chassis. You have to configure the stream , source and target parameters ...

  • Optibase MGW 2000e - page 18

    MGW 2000e Quick Start Guide 12 Configuring Source Parameters 1. Click the Source tab; the Source page appears. 2. Under Video Input , choose the video source connected to the relevant encoding module and click Apply . 3. If you use an analog audio source, set Audio Input to Unbalanced and click Apply . If you have an MGE-200D encoding m odule insta ...

  • Optibase MGW 2000e - page 19

    MGW 2000e Quick Start Guide 13 Configuring a UDP Target 1. Click the Target tab; the Target page appears. 2. Select a UDP Target; UDP appears under Target Type . 3. Click Add Target ; a default Multicast address is assigned and default parameters are set. • Confirm that your receiving PC belongs to the dis played Multicast address, otherwise you ...

  • Optibase MGW 2000e - page 20

    MGW 2000e Quick Start Guide 14 Running a Channel Once you have configured the channel, you can start transmitting a stream. Follow the instructions to trans mit a channel. MGW 2000e also lets you schedule a channel. For instructions on scheduling a channel, refer to the user manual. To transmit a stream: 1. In MGW 2000e Director’s Menu, click Cha ...

  • Optibase MGW 2000e - page 21

    MGW 2000e Quick Start Guide 15 Previewing MPEG-1 UDP Streams Playing back MPEG-1 UDP streams requires installing Optibase Player. For additional info rmation, refer to the user manual. To preview a MPEG-1 UDP stream: 1. On MGW 2000e Director’s Main window, click Channel Preview ; your currently configured channel appears. 2. Click Select ; Optiba ...

  • Optibase MGW 2000e - page 22

    MGW 2000e Quick Start Guide 16 Hardware Overview LEDs Description Power Off Blinks green Green No power MGW 2000e is booting Power on Alarm Off Blinks red No error At least one fan runs too slow or failed Ethernet Link Off Orange No connection Connected Ethernet Transmit Off Flashes green No transmission Transmitting (Channel) 1-6 Off Empty slot Bl ...

  • Optibase MGW 2000e - page 23

    MGW 2000e Quick Start Guide 17 Ports Description Six slots Accommodate up to six encoding modules. Power connector Connects power cord (90/260V AC). Power switch Switches MGW 2000e on and off. Table 4: MGW 2000e Rear Panel Interf ace Connectors Description Audio Connects analog audio source COMP.VID Connects Composite video source S-VIDEO Connects ...

  • Optibase MGW 2000e - page 24

    MGW 2000e Quick Start Guide 18 Connectors Description ANALOG AUD Connects analog audio source. DIG AUD Connects digital audio source. SDI Connects digital video source LEDs Description Source Off Green Bad or no video source. Video source detected. Table 7: MGE-200D Encodi ng Module Interfaces Cable Description Video BNC Connects digital video sour ...

  • Optibase MGW 2000e - page 25

    ...

  • Optibase MGW 2000e - page 26

    ...

  • Optibase MGW 2000e - page 27

    Technical Support Optibase's Extended Warranty program is a support package for Optibase products and provides one to four years of warranty starting with the day of purchase. For more details and first-line support, contact the reseller or distributor who sold you your Optibase product. The Optibase Knowledge Base offers technical tips and in ...

  • Optibase MGW 2000e - page 28

    Warranty Your Optibase product is warranted against defects in material and workmanship for a period of 12 m onths starting with the date of delivery. We will repair or replace (at our option) any part that proves defective during the warranty period, provided the entire unit is returned to Optibase by prepaid shipping in Optibase’s original pack ...

メーカー Optibase カテゴリー Server

Optibase MGW 2000eのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MGW 2000eの取扱説明書
- Optibaseの製品カード
- パンフレット
- またはOptibase MGW 2000eの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Optibase MGW 2000eの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Optibase MGW 2000eの取り付け説明書、サービスマニュアル、簡易説明書、またはOptibase MGW 2000eのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Optibase MGW 2000eの製品を使用するにあたって最も人気のある説明書を閲覧できます。

Optibase MGW 2000eデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがOptibase MGW 2000eを使用するのを助ける技術的文書のことです。説明書は通常、全てのOptibase MGW 2000eユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Optibaseの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Optibase MGW 2000eの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははOptibase MGW 2000eの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Optibase MGW 2000eに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Optibase MGW 2000eデバイスの基本機能を使うにあたってのヒント。 Optibase MGW 2000eのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Optibase MGW 2000eに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるOptibase MGW 2000eのメーカー/サービスへの連絡先に関する情報。

Optibase MGW 2000eについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもOptibase MGW 2000eの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがOptibase MGW 2000eで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)