-
Jacuzzi Steam & Shower Base SEDONA - page 1
SEDONA ™ Steam & Shower Base INST ALLA TION/OPERA TING INSTRUCTIONS ...
-
Jacuzzi Steam & Shower Base SEDONA - page 2
IMPORT ANT SAFETY INFORMA TION READ ALL INSTALLATION INSTRUCTIONS Jacuzzi Whirlpool Bath does not recommend prolonged periods of use of the steamer. Prolonged use of the steam system can raise excessively the internal human body temperature and impair the body’s ability to regulate its internal temperature (hyperthermia). Consult your physician a ...
-
Jacuzzi Steam & Shower Base SEDONA - page 3
CONTENTS Specifications _________________________________________________________________________ 2 Roughing-in Reference _________________________________________________________________ 2 Framing and Support ___________________________________________________________________ 3 Steam Enclosure ______________________________________________________ ...
-
Jacuzzi Steam & Shower Base SEDONA - page 4
*SteamPro supplied with NEMA 6-50P plug. NEMA 6-50R receptacle required. Product specifications are subject to change without notice. SPECIFICATIONS DIMENSIONS 60" (1524 mm) L 32" ( 813 mm) W 18-5/8" ( 473 mm) H TOTAL WEIGHT/ FLOOR LOADING 310 lbs (141 kg) /23 lb/sq. ft. (112 kg/sq. m) PRODUCT WEIGHT 110 lb (50 kg) ELECTRICAL *230 VA ...
-
Jacuzzi Steam & Shower Base SEDONA - page 5
10-1/2" x 5" DRAIN CUT -OUT 15-3/8" 33-1/4" 60-1/4" FRONT OF DOUBLE STUDS SUB-FLOOR 90º 90º MINIMUM 6" FROM FINISHED CEILING OR BOTTOM OF OPTIONAL DOME TO TEMPERA TURE SENSOR LOCA TION FROM STEAM GENERA TOR MAXIMUM 7' FROM FLOOR TO DIGIT AL CONTROLLER LOCA TION FRAMING AND ROUGH-IN DET AILS (FOR LEFT HAND UNIT) ...
-
Jacuzzi Steam & Shower Base SEDONA - page 6
4 Drain Down Locations There are several locations (left hand unit shown) where the optional automatic valve may be located when connecting to a drain line as shown in illustration. Right hand unit is mirror image. Exact location to be determined by installer. The manual drain valve can be moved from its current position when connecting to a drain ...
-
Jacuzzi Steam & Shower Base SEDONA - page 7
5 Minerals in the water or poor water quality can shorten the life of the steam generator or cause erratic operation if the tank is not drained regularly. Drain the tank frequently. Jacuzzi Whirlpool Bath also strongly recommends purchasing and installing the optional automatic drain down valve. The tank will be drained automatically after each use ...
-
Jacuzzi Steam & Shower Base SEDONA - page 8
6 SHUT OFF V AL VE WA TER SUPPL Y (3/8" COPPER TUBING) W ater Supply Consult local authorities for plumbing code require- ments in your area. Connect house cold water supply to steam generator supply tubing. IMPORTANT: Jacuzzi Whirlpool Bath does not warrant connections of water supply fittings and piping or drain systems. Nor is it responsibl ...
-
Jacuzzi Steam & Shower Base SEDONA - page 9
7 Controller Mounting Finished Wall Mounting The low voltage control can be mounted directly to a finished wall either inside or outside the steam room. Using a 2" hole saw, drill a hole in the finished wall where the control is to be mounted (the control cable should already be roughed-in to this location). Locate the control cable, pull it o ...
-
Jacuzzi Steam & Shower Base SEDONA - page 10
8 W ALL PROBE MUST POINT DOWNW ARD 7/8" HOLE OPTIONAL TRIM RING SILICONE SEALANT PIGT AIL Flange Mounting After base is in position secure flange to studs with screws provided. If there is a gap between flange and stud shims MUST be used. T emperature Sensor Mounting The temperature sensor should be mounted 6" below the ceiling or dome, i ...
-
Jacuzzi Steam & Shower Base SEDONA - page 11
9 Service Access Service access is through the removable panel. To remove panel, grab the middle of the panel and bow outwards till clips disengage. SERVICE ACCESS P ANEL GRAB P ANEL IN MIDDLE AND BOW OUTW ARDS BOW ACCESS P ANEL OUTW ARD FROM CENTER SHELL ACCESS P ANEL To reinstall the panel hold at an angle to the skirt and insert clip under edge ...
-
Jacuzzi Steam & Shower Base SEDONA - page 12
10 REMOVE SCREWS MOUNTING BRACKET SHIPPING RESTRAINT WA TER SUPPL Y SHUT OFF V AL VE TO STEAM HEAD DRAIN DOWN Maintenance of the SteamPro Unit Maintenance of the SteamPro includes flushing and visually inspecting for water leaks. To remove the unit remove the access panel. Turn off power to the unit and disengage the power cord. Turn the water supp ...
-
Jacuzzi Steam & Shower Base SEDONA - page 13
11 T roubleshooting There are no user serviceable parts in the Generator. All repair should be performed by a qualified service person. For additional assistance or the factory authorized service person nearest you call the Service Department at 1-800- 363-0251 (This number is only for service for the steam generator.). The Trouble Shooting Guide b ...
-
Jacuzzi Steam & Shower Base SEDONA - page 14
12 T roubleshooting ...
-
Jacuzzi Steam & Shower Base SEDONA - page 15
13 W iring Diagram ...
-
Jacuzzi Steam & Shower Base SEDONA - page 16
14 ©2002 Jacuzzi Whirlpool Bath T87100B 2/04 Jacuzzi Whirlpool Bath National Headquarters P.O. Drawer J, Walnut Creek, CA 94596 (925) 938-7070 Service Support: Call (800) 288-4002 Jacuzzi Whirlpool Shower base has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibili ...
-
Jacuzzi Steam & Shower Base SEDONA - page 17
Jacuzzi Whirlpool Bath C/O AMEREC P.O. Box 2258 Woodinville WA, 98072 Jacuzzi Whirlpool Bath, warrants that its Steam Generators (warranted products) are free of manufacturing defects both as to workmanship and material for 5 years and it will replace or repair defective parts or equipment for the period of time and in accordance with the condition ...
-
Jacuzzi Steam & Shower Base SEDONA - page 18
6. Procedure. Requests for repair or replacement, a return authorization number, or warranty information should be directed to AMEREC by calling toll-free 1-800-363-0251 or by writing to AMEREC, 17683 128th Place N.E., Woodinville, WA 98072. Defective product or parts returned for repair or replacement must be shipped prepaid to AMEREC at the above ...
-
Jacuzzi Steam & Shower Base SEDONA - page 19
Jacuzzi Whirlpool Bath Limited W arranty Builder Gr oup Bath Pr oduct Jacuzzi Whirlpool Bath P .O. Drawer J W alnut Creek, CA 94596-9885 WARRANTY COVERAGE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Builder Group Bath Product (“unit”) who purcha ...
-
Jacuzzi Steam & Shower Base SEDONA - page 20
RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility. In ...
Jacuzzi Steam & Shower Base SEDONAについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもJacuzzi Steam & Shower Base SEDONAの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJacuzzi Steam & Shower Base SEDONAで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。