Faber FEELINGの取扱説明書

29ページ 0.87 mb
ダウンロード

ページに移動 of 29

Summary
  • Faber FEELING - page 1

    installation guide and user manual room-sealed built-in gas-fireplace 40 010 527 02 37 SILENCE FEELING WHISPER SPECTRA NO V A CADRA NO V A MISTY Saturnus 8 NL-8448 CC Heerenv een P ostbus 219 NL-8440 AE Heerenveen T . +31(0)513 656500 F . +31(0)513 656501 “Log Burner T echnology” ...

  • Faber FEELING - page 2

    1 CONTENTS 1. INTR ODUCTION 2 2. SAFETY INSTRUCTIONS 3 3. INST ALLATION REQUIREMENTS 5 3.1 Builders opening and surround 5 3.2 Requirements outlet and exhaust 8 4. INST ALLATION-INSTRUCTIONS 17 4.1 Gas connection 17 4.2 P reparation of the appliance 17 4.3 F itting the firebox 24 4.4 Placing of the wood set 26 5. INST ALLATION OF THE FLUE 27 5.1 Co ...

  • Faber FEELING - page 3

    UK/IRL 2 UK/IRL 3 1. INTR ODUCTION N ote: these instructions should be read carefully and retained for future reference. Please leave these instructions with the user . This guide is concerning the following types of appliances: Widescreen interior: T ypes Silence and F eeling Roundscreen interior: T ype Misty MV100 interior: T ype Whisper MV110 in ...

  • Faber FEELING - page 4

    UK/IRL 5 UK/IRL 4 Building Regulations and Standards issued as relevant by the Department of the Environment or the Scottish Development Department. In the Republic of Ireland installation should be carried out in accordance with IS813, ICP3, IS327, Building Regulations, Codes of P ractice, the manufacturers instructions and any other rules in forc ...

  • Faber FEELING - page 5

    L M F I C B A J E D G K H Builders opening (mm) F eeling Silence Whisper S pectra Cadra Misty Nov a No va A Opening width* 960 960 780 780 680 710 B Opening height* 649 649 705 698 798 890 C Opening depth* 385 385 430 430 430 370 Shelf dimensions (combustible) D Min. height shelf from top frame 350 350 350 350 350 350 E Depth shelf max. 150 150 150 ...

  • Faber FEELING - page 6

    UK/IRL 9 UK/IRL 8 3.2 Flue requirements The appliance is of the type C11/C31. The appliance will need to be supplied with the approv ed flue pipes and terminal, it is not possible to supply your own. The minimum effective height of the flue system must be 0.5 or 1 meter , depending on the appliance. T erminal locations, through the wall as well as ...

  • Faber FEELING - page 7

    UK/IRL 012 3 4 5 6 0 XXXXXXX XXXXXX XXXXX XXXX XXX XX X 1 30 0 0 0 0 0 0/X* 2 3 0 3 0 0 0 0 0 0 3 4 54 53 0 0 0 0 0 4 4 54 53 0 0 0 0 0 5 5 05 04 54 53 0 0 0 6 5 05 04 54 53 0 0 0 7 6 06 06 05 05 04 5 8 6 06 06 06 05 0 9 6 56 56 06 0 10 65 65 65 11 65 65 12 65 Horizontal extension Effectiv e height X combination not allowed 0 remove flue r estricto ...

  • Faber FEELING - page 8

    UK/IRL 13 3. 2 Flue requirements (continuing) 3.2.1 T erminal position V erify if the required terminal position meets the local installation regulations regarding disturbance, good functioning and ventilation. (Also see: safety requirements). N ote: The terminal must be located so that the outlet is not obstructed. If the flue terminal is located ...

  • Faber FEELING - page 9

    T able 6 UK/IRL 15 UK/IRL 14 Dimension T erminal position Balanced flue room sealed (kW input 7.5 kW expressed in net) N atural draught A Direct below an opening, airbrick, 300 mm opening windows, etc. B Abov e an opening, airbrick, 300 mm opening window ect. C Horizontally to an opening, airbrick, 300 mm opening window etc. D Below gutters, soil p ...

  • Faber FEELING - page 10

    UK/IRL 17 UK/IRL 16 4. INSTRUCTIONS FOR INST ALLA TION 4.1 Gas connection 1. Installation pipes should be in accordance with BS 6891. Pipe work from the meter to the appliance must be of adequate size. 2. The complete installation including the meter must be tested for soundness and purged as described in the above code. 3. A means of isolation mus ...

  • Faber FEELING - page 11

    UK/IRL 19 UK/IRL 18 4.2 P reparing the appliances Widescreen and Whisper (continuing) 4. T ake the box with the log set out of the combustion chamber . 5. Place the right flue restrictor in the combustion chamber . T o determine the right flue restrictor , see chapter 3. C C C C C C C C C C  fig. 8 fig. 9 4.2 P reparing the appliances Widescreen ...

  • Faber FEELING - page 12

    UK/IRL 21 4.3 P reparing the appliance Misty (continuing) 4. T ake the box with the log set out of the combustion chamber . 5. Place the right flue restrictor in the combustion chamber . T o determine the right flue restrictor , see chapter 3.  fig. 12 UK/IRL 20 4.3 P reparing the appliance Misty 1. Remove the door frame. Lift and pull forward ( ...

  • Faber FEELING - page 13

    UK/IRL 23 UK/IRL 22 4.4 P reparing the appliances Spectra Nova/C adra N ova (continuing) 4. T ake the box with the log set out of the combustion chamber . 5. Place the right flue restrictor in the combustion chamber . T o determine the right flue restrictor , see chapter 3.  fig. 15 4.4 P reparing the appliances Spectra Nova/C adra N ova 1. T o ...

  • Faber FEELING - page 14

    UK/IRL 25 UK/IRL 24 4.5 Fitting the firebox (continuing) 8. Spr ead, the bags of embers (imitation ashes) provide with the appliance over the burner tray . Attention! N o embers on the grid end between the logs and the burner tray . 9. Before placing the glass; check the glass sealing rope is in good condition and makes an effective seal. Be sure t ...

  • Faber FEELING - page 15

    UK/IRL 27 UK/IRL UK/IRL 5. INST ALLA TION OF THE FLUE 5.1 Connections with use of concentric duct material - Build the system starting from the appliance on. - Make a hole of ø 153 mm for the wall or roof mounted terminal. - Make sure you place the pipes in the right direction, the narrow end towards the appliance. - Make sure the pipes are fixed ...

  • Faber FEELING - page 16

    UK/IRL 29 UK/IRL 28 UK/IRL UK/IRL 5.2 Connection onto an existing chimney (continuing) 5. F ixing the chimney sealing plate (D) and place the 150 mm grommet into the hole of the sealing plate. 6. F ix the sealing plate air tight into the builders opening (use the isolation rope from the chimney connection set to make the plate air tight). 7. Slide ...

  • Faber FEELING - page 17

    UK/IRL 31 UK/IRL 30 UK/IRL UK/IRL 3. Connect the wires to the gas valve (see fig. 22). 4. Check that there are batteries in the transmitter . See "Replacing batteries", see chapter 10.4.4. 5. Set the on/off switch on the receiver to "on". Setting the right transmission code The receiver has to learn the code from the transmitter ...

  • Faber FEELING - page 18

    UK/IRL 33 UK/IRL 32 UK/IRL UK/IRL 6.3 Functional balanced flue check 1. Set the appliance on max. input. 2. V erify the flame picture, this means no flames against the window , the flame have to come besides the logs, if not check the log layout. 3. Check if the flames are yellow after 10 minutes of operation. If you still have a blue flame or the ...

  • Faber FEELING - page 19

    UK/IRL 35 UK/IRL 34 8. SERVICING T o ensure safe, efficient operation of the appliance, it is necessary to carry out routine servicing at regular intervals. It is recommended, that the fire is inspected/serviced by a competent person at least once a year . Important T urn of f the gas supply before commencing any ser vicing. Always test for gas sou ...

  • Faber FEELING - page 20

    UK/IRL 37 UK/IRL 36 8.1.4 Burner tray assembly 1. Remov e the front, glass, log set, grid and burner tray cover . 2. Break the gas supply at the control valve. 3. U nscrew the burner assembly and take them out of the combustion chamber . A. Pilot assembly B. Burner C. Fixation plate D. Injector E. Gas control F . Receiv er 8.1.5 Pilot/thermocouple ...

  • Faber FEELING - page 21

    UK/IRL 39 UK/IRL 38 UK/IRL UK/IRL 8.1.7 Combustion test A BS7967 combustion analysis check should be carried out using an analyser to BS7927 positioned in the flue outlet. A Ratio of CO/CO2 should be less than 0.01 within 30 minutes. (100ppm CO per 1% CO2). A r eading of CO in the room centre should give a rise of less than 9ppm over ambient, peak ...

  • Faber FEELING - page 22

    Whisper F eeling S ilence Misty S pectra Cadra Nov a Nov a Description Company Company Company Company Company Company part par t par t part par t par t Surround antracite A9271453 A9270053 A9267753 AA9272853 A9274149 A9274249 Glass 04508200 04508300 04508300 04509000 4509500 04509300 Glass below xxxx 04509600 04509400 Burner NG 20521808 20521808 2 ...

  • Faber FEELING - page 23

    Country UK/IRL UK/IRL Category II 2H3+ II 2H3+ Model type C11 0f C31 C11 0f C31 Heat input Hi kW 7.5 7.5 Efficiency class 2 2 NOX class 4 4 T ype of gas G20 G30 Inlet pressure mbar 20 30/37 Gas rate 15 °C / 1013 mbar m3/h 800 231 kg/h 540 g Reference burner pressure mbar 13 25 Injector size mm 3x 1.50 3x 0.90 Reduced input restrictor mm 1.8 1.1 Pi ...

  • Faber FEELING - page 24

    UK/IRL 45 UK/IRL 44 UK/IRL UK/IRL UK/IRL USER GUIDE 8.3 TECHNICAL DA T A Roundscr een Misty Country UK/IRL UK/IRL Category II 2H3+ II 2H3+ Model type C11 0f C31 C11 0f C31 Heat input Hi kW 8,5 8,5 Efficiency class 2 2 NOX class 4 4 T ype of gas G20 G30 Inlet pressure mbar 20 30 / 37 Gas rate 15 °C / 1013 mbar m3/h 900 231 kg/h 540 g Reference burn ...

  • Faber FEELING - page 25

    UK/IRL 47 UK/IRL 46 IMPORT ANT A suitable Fir eguard conforming to BS6539 and BS6778 should be used with this appliance to protect children, the elderly or infirm. Care should also be taken with pets. In your own interest and that of safety , all gas appliances must be installed by competent persons. Installation must be in accordance with N ationa ...

  • Faber FEELING - page 26

    UK/IRL 49 UK/IRL 48 Knob A The { is the OFF position preventing any gas from passing through the control valve to either the pilot burner or to the main burner . By pressing the knob in it is possible to turn it anticlockwise. The first function is to turn on the gas to the pilot- this occurs just before reaching the | position (if the fire has not ...

  • Faber FEELING - page 27

    UK/IRL 51 UK/IRL 50 10.4.1 T o light 1. P ush in and turn the control knob (A) from { anticlockwise to the setting (small flame). Y ou will hear a ignition click. Check that the pilot is lit (if not repeat). 2. Continue to hold in the control knob for a further ten seconds to ensure that the pilot flame is stable. 3. Release the knob. The pilot sho ...

  • Faber FEELING - page 28

    UK/IRL 53 UK/IRL 52 10.4.3 Setting the right transmission code he receiver has to learn the code from the transmitter , which is already done at the factory . Ho wever the code disappears if the receiver is disconnected from the mains for a longer period, 1. Set the on/off switch on the receiver to "on". 2. Push the "mod" button ...

  • Faber FEELING - page 29

    UK/IRL 55 UK/IRL 54 UK/IRL UK/IRL UK/IRL UK/IRL 12. DISPOSAL OF THE P A CKAGING AND THE APPLIANCE The appliance packaging is recyclable. The packaging could include the following materials: - cardboard; - CFC-free foam (soft); - wood; - plastic; - paper . These materials should be disposed responsibly and in conformity with government regulations. ...

メーカー Faber カテゴリー Indoor Fireplace

Faber FEELINGのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FEELINGの取扱説明書
- Faberの製品カード
- パンフレット
- またはFaber FEELINGの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Faber FEELINGの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Faber FEELINGの取り付け説明書、サービスマニュアル、簡易説明書、またはFaber FEELINGのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Faber FEELINGの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Faber FEELINGデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがFaber FEELINGを使用するのを助ける技術的文書のことです。説明書は通常、全てのFaber FEELINGユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Faberの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Faber FEELINGの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははFaber FEELINGの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Faber FEELINGに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Faber FEELINGデバイスの基本機能を使うにあたってのヒント。 Faber FEELINGのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Faber FEELINGに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるFaber FEELINGのメーカー/サービスへの連絡先に関する情報。

Faber FEELINGについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもFaber FEELINGの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがFaber FEELINGで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)