KTI Networks KGD-600の取扱説明書

53ページ 1.64 mb
ダウンロード

ページに移動 of 53

Summary
  • KTI Networks KGD-600 - page 1

    -1- K GD-600 Industrial Web Smart 6-Port Giga bit Ethernet Switch with Fiber Connectivity In stallation Guide DOC.070402 ...

  • KTI Networks KGD-600 - page 2

    -2- (C) 2006 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without permission from KTI Networks Inc. KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from tim ...

  • KTI Networks KGD-600 - page 3

    -3- The information contained in this document is subject to change without prior notice. Copyright (C) . All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp. W ARNING: This equi pment ha s been tested a nd found to comply with the li mits f or a Cla ss A digital device, pursua nt to Part 15 of the FCC Rules. These limi ...

  • KTI Networks KGD-600 - page 4

    -4- T a ble of Contents 1. Introduction .................................................................................................. 6 1.1 Features .................................................................................................................. .7 1.2 Product Pa nels .......................................................... ...

  • KTI Networks KGD-600 - page 5

    -5- 4. Web Ma n age ment ....................................................................................... 27 4.1 Start Browser Software a nd M a king Connection ..................................................... 27 4.2 Login to the Switch U nit ........................................................................................... 27 ...

  • KTI Networks KGD-600 - page 6

    -6- 1. Introduction The KGD-600 is a ma naged 6-port Giga bit Ethernet switch which is featured with five copper ports, one mini-GBIC (SFP) port a nd the f ollowing a dva ntage s in a small footprint box: Plug a nd Play The switch is shi pped with factory default configuration which behave s like a n unma naged Giga bit switch for workgroup. It pro ...

  • KTI Networks KGD-600 - page 7

    -7- Industrial Features For industri al environment, the devices are designed with the following enha nced features exceeding that of commerci al Ethernet switches: • High a nd wide operating T emperature • Power input interfa ce: Industrial screw terminal block a nd DC power jack f or external commer - ci al power a d a pter a s option • Scr ...

  • KTI Networks KGD-600 - page 8

    -8- 1.2 Product Pa nels The following figure illustrates the fa c es of the switch: ...

  • KTI Networks KGD-600 - page 9

    -9- 1.3 LED Indicators LED Function POWER Power status LN K/1000M/ACT Network port 1000M link status (Port 1 - Port 5) LNK/100M/ACT Network port 100M link status (Port 1 - Port 5) LNK/10M/ACT Network port 10M link status (Port 1 - Port 5) P6 LNK Port 6 1000M link status P6 OL Port 6 optical link status 1.4 Specifications 10/100/1000 Copper Ports Co ...

  • KTI Networks KGD-600 - page 10

    -10- Port control Port configuration control vi a software ma nagement Port M irroring M irror received fra mes to a sniffer port Softwar e M a nage ment Functions Interfa ces W e b browser M a nagement objects Syste m configuration - IP settings, Name, Pa ssword Port configuration control and status VLAN function settings QoS function settings Por ...

  • KTI Networks KGD-600 - page 11

    -11- 2. In stallation 2.1 Un pa cking The product pa ckage contains: • The switch unit • One product CD-ROM 2.2 Safety Cautions T o reduce the risk of bodily injury , electrical shock, fire, a nd da mage to the product, observe the following precautions. • Do not service any product except as explained in your system documentation. • Openin ...

  • KTI Networks KGD-600 - page 12

    -12- 2.4 Din-Rail Mounting The steps to mount the switch on a Din-rail are: One Din-rail mounting bra cket is provided in the product pa ckage a s shown below: Install the bra cket on the bottom of the switch unit. Mount the device on a Din-rail. ...

  • KTI Networks KGD-600 - page 13

    -13- 2.5 Pa nel Mounting One pa nel mounting bra cket is provided in the product pa ckage a s shown below: Install the bra cket on the bottom of the switch unit. The final di mension after pa nel bra cket is installed is shown below: ...

  • KTI Networks KGD-600 - page 14

    -14- 2.6 Applying Power The switch provides two types of power interfa ces, terminal block a nd DC power ja ck f or rece iving DC power input from external power supply system. Using T erminal Blocks Three terminal conta cts are provided: V dc Positive ( + ) termin al V dc Negative ( - ) termin al Cha ssis ground ( V dc : +5V ~ +30V DC) One 3P term ...

  • KTI Networks KGD-600 - page 15

    -15- Using DC Power Ja ck When a n external power system is not availa ble, the switch provides a DC ja ck to rece ive power from typical AC-DC power a d a pter alternatively . AC Power Ada pters: Optional commerci al rated a da pters are availa ble for purcha sing. AC input power: AC power voltage of your area, options - Rated AC120V/60Hz DC7.5V 1 ...

  • KTI Networks KGD-600 - page 16

    -16- 2.8 Ma king UTP Connection s The 10/100/1000 copper ports support the following connection type s a nd dista nces: Network Cables 10BASE-T : 2-pair UTP Cat. 3,4,5 , EIA/TIA-568B 100-ohm 100BASE-TX: 2-pair UTP Cat. 5, EIA/TIA-568B 100-ohm 1000BASE-T : 4-pair UTP Cat. 5 or higher (Cat.5e is recommended), EIA/TIA-568B 100-ohm Link distance: Up to ...

  • KTI Networks KGD-600 - page 17

    -17- 2.9 M a king Fiber Connection The mini-GBIC (SFP) port must be installed with a n SFP fiber tra nsceiver f or making fiber connec- tion. Y our switch may come with a n SFP tra nsceiver pre-installed when it is shi pped. Installing SFP Fiber T ra nsceiver T o install a n SFP fiber tra nsce iver into mini-GBIC port, the ste ps are: 1. T urn off ...

  • KTI Networks KGD-600 - page 18

    -18- 2.10 LED Indication L ED Function State Interpretation POWER Power status O N The power is supplied to the switch. OFF The power is not supplied to the switch. LNK/1000M/ACT Port link status O N A 1000M link is established. (No traffic) BLINK Port link is up and there is traffic. OFF Port link is down. LNK/100M/ACT Port link status O N A 100M ...

  • KTI Networks KGD-600 - page 19

    -19- 3. Advanced Functions T o help a better understa nding a bout the software ma nage ment interfa ces, this cha pter describes some advanced functions provided by the switch. 3.1 Abbreviation Ingress Port : Ingress port is the input port on which a packet is received. Egress Port : Egress port is the output port from which a packet is sent out. ...

  • KTI Networks KGD-600 - page 20

    -20- 3.2 QoS Function The switch provides a powerful Quality of Service (QoS) function to guide the packet forwarding in four priority classes. The versatile classification methods can meet most of the application needs. The following figure illustrates the QoS operation flow when a packet received on the ingress port until it is transmitted out fr ...

  • KTI Networks KGD-600 - page 21

    -21- 3.2.1 Packet Priority Classification Each received packet is examined and classified into one of four priority classes, Class 3, Class 2, Class 1 and Class 0 upon reception. The switch provides the following classification methods: 802.1p classification : use User Priority tag value in the received IEEE 802.1Q packet to map to one priority cla ...

  • KTI Networks KGD-600 - page 22

    -22- 3.3 VLAN Function The switch supports port-ba sed VLAN, 802.1Q T ag VLAN a nd eight VLAN groups. 3.3.1 VLAN Operation The following figure illustrates the basic VLAN operation flow beginning from a packet received on an ingress port until it is transmitted from an egress port. The following sections describe the VLAN processes and Advanced VLA ...

  • KTI Networks KGD-600 - page 23

    -23- 3.3.2.3 Drop Untag Per Port Setting Enable - All untagged packets and priority-tagged packets are dropped. A priority-tagged packet is treated as an untagged packet in this switch. Only VLAN-tagged packets are admitted. Disable - Disable Untagged packet filtering 3.3.2.4 Drop T ag Per Port Setting Enable - All VLAN-tagged packets are dropped. ...

  • KTI Networks KGD-600 - page 24

    -24- 3.3.5 VLAN Group T a ble Configuration The switch provides a ta ble of eight VLAN groups to support up to eight VLANs at the same ti me. Each VLAN group is associated to one unique VLAN. The table is referred for VLAN classification. A VLAN group contains the following configuration settings: VID : 12-bit VLAN Identifier index to the VLAN to w ...

  • KTI Networks KGD-600 - page 25

    -25- 3.3.8 Egre ss T agging Rules Egress T agging rules are used to make cha nge to the pa cket bef ore it is stored into egress queue of a n egress port. Three egress settings are provided for each port and are described as follows: 3.3.8.1 Egress Settings Insert T ag (per port setting) Enable - Insert the T ag data of the a ssociated Pa cket T ag ...

  • KTI Networks KGD-600 - page 26

    -26- 3.4 802.1X Authentication Port Access Control For some IEEE 802 LAN environments, it is desira ble to restrict a cce ss to the services of fered by the LAN to those users a nd devices that are permitted to make use of those services. IEEE 802.1X Port- ba sed network access control function provide a mea ns of authenticating a nd authorizing de ...

  • KTI Networks KGD-600 - page 27

    -27- 4. W eb Ma n age ment The switch features a n http server which ca n serve the ma nagement requests coming from a ny web browser software over TCP/IP network. W eb Br owser Compatible web browser software with JA V A scri pt support M icrosoft Internet Explorer 4.0 or later Netsca pe Communicator 4.x or later Set IP Addre ss f or the System U ...

  • KTI Networks KGD-600 - page 28

    -28- 4.3 Main M a n age ment Menu The following inf ormation describes the ba sic functions of the main menu. Configuration System Switch information, system and IP related settings Ports Port link status, port operation mode configuration VLAN VLAN related configuration QoS Quality of Service related configuration Port M irroring Port mirroring re ...

  • KTI Networks KGD-600 - page 29

    -29- 4.4 Syste m Configuration De scri ption MAC Address The MAC a ddress fa ctory configured for the switch It can not be changed in any cases. S/W V ersion The firmware version currently running H/W V ersion The hardware version currently operating M a nagement VLAN Set ma nagement VLAN information - VID VLAN ID configured for web ma nagement to ...

  • KTI Networks KGD-600 - page 30

    -30- 4.4.1 M a n age ment VLAN M a nagement VLAN settings allow a dministrator to a ccess the switch a nd perform the switch ma nage- ment over a dedicated VLAN. The following rule s are a pplied with the M a nage ment VLAN: 1. If the VLAN function is disa bled, M a nagement VLAN settings are ignored a nd no VLAN li mitation is a pplied in a ccessi ...

  • KTI Networks KGD-600 - page 31

    -31- 4.5 Ports Configuration Function Port The port number Link P o r t l i n k status Speed a nd duplex status with gr een ba ckground - port is link on Down with r ed backgr ound - port is link down Mode Select port operating mode Disabled - disable the port operation Port 1 - Port 5 Mode Auto-negoti ation Speed ca pa bility Duplex ca pa bility A ...

  • KTI Networks KGD-600 - page 32

    -32- 4.6 VLANs VLAN Configuration Description VLAN Disable Select to disable VLAN function All ports are allowed to communicate with each others freely with no VLAN limitation. Port-based VLAN Mode Simple configuration for 2 port-based VLAN groups Port-based VLAN ISP Mode Simple configuration for 5 port-based VLAN groups Advance VLAN Mode Full VLAN ...

  • KTI Networks KGD-600 - page 33

    -33- 4.6.1 Port-ba sed VLAN Mode Configuration Description Group 1, 2 Port-based VLAN group number Member ports Select member ports for the group [Apply] Click to apply the configuration change [Refresh] Click to refresh current configuration [Back] Click to go back to upper menu Operation in this mode: 1. The member ports of two groups are allowed ...

  • KTI Networks KGD-600 - page 34

    -34- 4.6.2 Port-ba sed VLAN ISP Mode Configuration Description Joint port Select a port as the joint port for all 5 port-based VLAN groups [Apply] Click to apply the configuration change [Refresh] Click to refresh current configuration [Back] Click to go back to upper menu Example: If Port 6 is selected as the joint port, the 5 port-based VLAN grou ...

  • KTI Networks KGD-600 - page 35

    -35- 4.6.3 Adva nced VLAN Mode Configuration Description Ingress Default T ag Click to configure per port Ingress Default T ag settings Ingress Settings Click to configure per port ingress settings Egress Settings Click to configure per port egress settings VLAN Groups Click to configure VLAN group table ...

  • KTI Networks KGD-600 - page 36

    -36- 4.6.3.1 Ingre ss Default T ag Configuration Description Port Port number PVID Port VID, VID f or Ingress Default T ag 1 ~ 4095 - decimal 12-bit VID value CFI CFI for Ingre ss Default T ag 0, 1 - 1-bit CFI value User Priority User priority f or Ingress Default T a g 0 ~ 7 - decimal 3-bit value [Apply] Click to apply the configuration change [Re ...

  • KTI Networks KGD-600 - page 37

    -37- 4.6.3.2 Ingre ss Settings Configuration Description Port Port number T ag A ware Check tag data for every received packet T ag-awar e - set to activate T ag-ba sed mode T ag-ignor e - set to use port-based mode a nd ignore a ny tag in pa cket Keep T ag T ag is removed from the rece ived pa cket if exists Enable - set to activate tag removal fo ...

  • KTI Networks KGD-600 - page 38

    -38- 4.6.3.3 Egre ss Settings Configuration Description Port Port number Insert T a g Activate tagging (Insert a tag to the packet) Enable - set to activate tagging Disable - set to disable tagging function Untagging Specific VID No tagging if VID of packet tag information matches [Untagged VID] Enable - set to enable this function Disable - set to ...

  • KTI Networks KGD-600 - page 39

    -39- 4.6.3.4 VLAN Groups Configuration Description Group Group number V I D VID of the VLAN to which this group is associated 1 ~ 4095 - decimal 12-bit VID value Member Ports Select the admitted egress ports for the packets belong to the VLAN Port 1 ~ 6 - click to select Source Port Check Check whether the ingress port is the member port of the VLA ...

  • KTI Networks KGD-600 - page 40

    -40- 4.6.4 Importa nt Note s for VLAN Configuration Some considerations should be checked in configuring VLAN settings: 1 . Switch VLAN Mode selection It is suggested to evaluate your VLAN application first and plan your VLAN configuration carefully before a pplying it. Any incorrect setting might cause network proble m. 2 . Double T agged in Adva ...

  • KTI Networks KGD-600 - page 41

    -41- 4.7 Quality of Service QoS Configuration D e scri ption Port Port number 802.1p 802.1p priority cla ssification Enable - set to ena ble this cla ssification to the port f or priority-tagged a n d VLAN-tagged pa ckets Disa ble - 802.1p cla ssification is not a pplied to the port DSCP DSCP classification Enable - set to ena ble DSCP cla ssificat ...

  • KTI Networks KGD-600 - page 42

    -42- 4.7.1 802.1p M a pping Configuration Description Port n Port number n tag m 3-bit User priority tag value m ( ra nge : 0 ~ 7 ) Priority cla ss M a pped priority cla ss f or tag m on Port n Class 3 ~ Class 0 [Apply] Click to apply the configuration change [Refresh] Click to refresh current configuration [Back] Click to go back to upper menu Eve ...

  • KTI Networks KGD-600 - page 43

    -43- 4.7.2 DSCP Ma pping Configuration Description DSCP [0-63] Seven user-defined DSCP value s which are configured with a priority cla ss 0 ~ 63 - 6-bit DSCP value in decimal Priority The priority class configured for the user-defined DSCP value Class 3 ~ Class 0 All others The other DSCP values not in the seven user-defined values are assigned a ...

  • KTI Networks KGD-600 - page 44

    -44- 4.7.3 QoS Service Policy Configuration Description Port Port number Policy Service policy for egre ss priority a mong four egress cla ss queues Strict priority - high class queue is served first always till it is empty W eighted ratio priority Cla ss 3:2:1:0 = 4:3:2:1 - we ighted ratio 4:3:2:1 W eighted ratio priority Cla ss 3:2:1:0 = 5:3:1:1 ...

  • KTI Networks KGD-600 - page 45

    -45- 4.8 Port Mirroring Configuration Description Sniffer Port The port is forwarded all pa ckets received on the mirrored ports Mirrored Ports Select the ports which will be mirrored all received packets to the sniffer port. [Apply] Click to apply the configuration change [Refresh] Click to refresh current configuration ...

  • KTI Networks KGD-600 - page 46

    -46- 4.9 802.1X Configuration Configuration De scri ption Mode Disa bled - disa ble 802.1x function Enabled - ena ble 802.1x function RADIUS IP IP a ddress of the Ra dius server RADIUS UDP Port The UDP port for authentication requests to the specified Ra dius server RADIUS Secret The encryption key f or use during authentication sessions with the R ...

  • KTI Networks KGD-600 - page 47

    -47- [Re-authenticate] Click to perform a ma nual authentication for the port [Force Re initi alize] Click to perform a n 802.1x initi alization for the port [Re-authenticate All] Click to perform ma nual authentication for all ports [Force Re initi alize All] Click to perform 802.1x initi alization for all ports [Para meters] Click to configure Re ...

  • KTI Networks KGD-600 - page 48

    -48- 4.10 Statistics Configuration De scri ption Port Port number Tx Bytes T otal of bytes tra nsmitted on the port Tx Frame s T otal of pa cket fra mes tra nsmitted on the port Rx Bytes T otal of bytes received on the port Rx Frame s T otal of packet fra mes received on the port Tx Errors T otal of error pa cket fra mes tra nsmitted on the port Rx ...

  • KTI Networks KGD-600 - page 49

    -49- 4.1 1 Reboot System This menu is used to reboot the switch unit remotely with current configuration. Starting this menu will make your current http connection lost. Y ou must rebuild the connection to perf orm a ny ma nagement operation to the unit. 4.12 Re store Default This menu is used to restore all settings of the switch unit with fa ctor ...

  • KTI Networks KGD-600 - page 50

    -50- 4.13.2 Upload Configuration File Enter the path a nd file na me of a configuration file for uploa ding. Configuration De scri ption Filena me Path a nd filena me (configuration) [Browse] Click to browse your computer file system for the configuration file [Uploa d] Click to start uploa d [Ba ckup Config File] Right click to downloa d configura ...

  • KTI Networks KGD-600 - page 51

    -51- Appendix. Fa ctory Def ault Settings System Configuration M a nagement VLAN - VID 0 M a nagement VLAN - CFI 0 M a nagement VLAN - User priority 0 IP Address 192.168.0.2 IP Subnet ma s k 255.255.255.0 Gateway IP 192.168.0.1 Na me Null Pa ssword 123 Ina ctivity T i meout 0 Ports Configuration Mode Auto for Port 1 - Port 5, 1000 Full for Port 6 F ...

  • KTI Networks KGD-600 - page 52

    -52- VLAN Group 1 - VID 1 VLAN Group 1 - Member Ports Port 1, 2, 3, 4, 5, 6 VLAN Group 1 - Source Port Check Disable VLAN Group 2 - VID 2 VLAN Group 2 - Member Ports None VLAN Group 2 - Source Port Check Disable VLAN Group 3 - VID 3 VLAN Group 3 - Member Ports None VLAN Group 3 - Source Port Check Disable VLAN Group 4 - VID 4 VLAN Group 4 - Member ...

  • KTI Networks KGD-600 - page 53

    -53- Port 1~Port 6 - tag 5 Cla ss 2 Port 1~Port 6 - tag 6 Class 3 Port 1~Port 6 - tag 7 Class 3 QoS DSCP Mapping DSCP 1 / Priority 0, Cla ss 0 DSCP 2 / Priority 0, Class 0 DSCP 3 / Priority 0, Class 0 DSCP 4 / Priority 0, Class 0 DSCP 5 / Priority 0, Class 0 DSCP 6 / Priority 0, Class 0 DSCP 7 / Priority 0, Class 0 All others DSCP Class 0 QoS Servi ...

メーカー KTI Networks カテゴリー Switch

KTI Networks KGD-600のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- KGD-600の取扱説明書
- KTI Networksの製品カード
- パンフレット
- またはKTI Networks KGD-600の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、KTI Networks KGD-600の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、KTI Networks KGD-600の取り付け説明書、サービスマニュアル、簡易説明書、またはKTI Networks KGD-600のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、KTI Networks KGD-600の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

KTI Networks KGD-600デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKTI Networks KGD-600を使用するのを助ける技術的文書のことです。説明書は通常、全てのKTI Networks KGD-600ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

KTI Networksの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. KTI Networks KGD-600の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKTI Networks KGD-600の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。KTI Networks KGD-600に関してこのドキュメントで見つけることができる全てのヒントの目次
3. KTI Networks KGD-600デバイスの基本機能を使うにあたってのヒント。 KTI Networks KGD-600のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。KTI Networks KGD-600に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKTI Networks KGD-600のメーカー/サービスへの連絡先に関する情報。

KTI Networks KGD-600についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKTI Networks KGD-600の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKTI Networks KGD-600で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)