Kenwood K-CD01の取扱説明書

28ページ 0.49 mb
ダウンロード

ページに移動 of 28

Summary
  • Kenwood K-CD01 - page 1

    K-CD01 CD-RECEIVER INSTR UCTION MANU AL © B64-2923-00/00 (M) (TKR) B64-2923-00_U.S.Indd 1 04.9.3, 4:23:34 PM ...

  • Kenwood K-CD01 - page 2

    2 | English Con tents Safety precautions 3 W ARNING CAUTION NOTE Notes 5 About CDs 6 General featur es 7 Pow er Selecting the Source Volume Audio Control Defeat Setting Switching Display Subwoofer Output T uner/TV control fea tures 9 T uning Direct Access T uning Station Pr eset Memor y Auto Memory Entr y Pr eset Tuning CRSC (Clean Reception System ...

  • Kenwood K-CD01 - page 3

    English | 3 Safety precautions 2 CA UTION T o prev ent damage to the machine, take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity . Also avoid places ...

  • Kenwood K-CD01 - page 4

    4 | English NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. If the unit still fails to operate properly after the Reset button has been pressed, contact your local KENWOOD ...

  • Kenwood K-CD01 - page 5

    English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off . • Applying spray cleaner directly to the unit may affect its mechanical parts. W ...

  • Kenwood K-CD01 - page 6

    6 | English Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD . Also, don ’t use a CD with tape stuck on it. When using a new CD If the CD center hole o ...

  • Kenwood K-CD01 - page 7

    English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. Selecting the S ource Press the [SRC] button. Source required Display T uner "T uner" CD "Compact Disc" External disc (Optional accessory) "CD CH" TV (Optional acces ...

  • Kenwood K-CD01 - page 8

    8 | English General fea tures Audio C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio C ontrol mode Press the [ AUDIO ] button. " Audio C TRL " is displayed. 3 Select the Audio item for adjustment Press the [F M] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown ...

  • Kenwood K-CD01 - page 9

    English | 9 T uner/T V control f eatures ¢ 4 CRSC 1 – 6 AM FNC FM SRC Frequency display Band display ST indicator Preset station number T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " T uner" display . 2 Select the band Press the [F M] or [AM] button. Each time the [FM] button is pr essed it sw ...

  • Kenwood K-CD01 - page 10

    10 | English T uner/T V control f eatures Station Pr eset Memor y Putting the station in the memory. 1 Select the band Press the [F M] or [AM] button. 2 Select the frequency to put in the memor y Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds. The preset number displa ...

  • Kenwood K-CD01 - page 11

    English | 11 F unction of LX BUS T elevision TV T uning The T V channel of a connected LX BUS T elevision (optional accessory) can be selected. The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details. 1 Select T V source Press the [SRC] button. Select the " T V& ...

  • Kenwood K-CD01 - page 12

    12 | English CD/External disc control f eatures Playing CD When a CD is inserted Press the [SRC] button. Select the "Compact Disc" display. • When a CD is inserted, the "CD" indicator is ON. Pause and play Press the [ 38 ] button. Each time the button is pressed it pauses and plays. Eject the CD Press the [ 0 ] button. ¢ 4 38 ...

  • Kenwood K-CD01 - page 13

    English | 13 F ast Forwarding and Re versing F ast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point. Reversing Hold down on the [ 4 ] button. Release your finger to play the disc at that point. T rack Search Selecting the song you want to hear . Press the [ 4 ] or [ ¢ ] button. F unction of disc changer ...

  • Kenwood K-CD01 - page 14

    14 | English CD/External disc control f eatures Random Play Playing all the songs on the disc in random order . Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF . When it’ s ON, "Random" is displayed. • When the [ ¢ ] button is pressed, the next song select star ts. • During Random play, it switch ...

  • Kenwood K-CD01 - page 15

    English | 15 Menu system Function Set Setting during operation beep sound etc. functions. The F unction Set basic operation method is explained here. The reference f or the Function items and their setting content is after this operation explanation. 1 Enter F unc tion Set mode Press the [FNC] button for at least 1 sec ond. "F unction Set" ...

  • Kenwood K-CD01 - page 16

    16 | English Menu system In Standby mode Con trast Adjustmen t Adjusting the display contrast. Display and Setting "Con trast 1" … "Con trast 7" (Original setting) … "Con trast 11" In Standby mode Selecting display mode The sound quality can be improved b y turning off the regular displays . Display Setting "D ...

  • Kenwood K-CD01 - page 17

    English | 17 In T uner mode T uning Mode Sets the tuning mode. T uning mode Display Operation Auto seek " AUT O 1" Automatic sear ch for a station. Preset sta tion seek " AUT O 2" Search in or der of the stations in the Preset memory . Manual "Manual" Normal manual tuning contr ol. In T uner mode Auto Memory Entry For ...

  • Kenwood K-CD01 - page 18

    18 | English Menu system In Tuner/CD/External disc contr ol mode B.M.S. (Bass Management S ystem) Adjust the bass boost level of the external amplifier using the main unit. Display Setting " AMP Bass FL T" Bass boost level is flat. " AMP Bass +6" Bass boost level is low (+6dB). " AMP Bass +12" Bass boost level is mid ( ...

  • Kenwood K-CD01 - page 19

    English | 19 Basic Operations of r emote Loading and Replacing the battery Use one lithium battery (CR2025). Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case . Keep on slide Pull out 2 W ARNING • Store unused batteries out of the reach of childr en. Contact a doctor immediately if the ba ...

  • Kenwood K-CD01 - page 20

    20 | English In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations. [DIRECT ]/ [OK] button Enters and cancels the 'Direct Access T uning&ap ...

  • Kenwood K-CD01 - page 21

    English | 21 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Mak e the proper input and output wire connections for each unit. 3. Connect the speaker wires ...

  • Kenwood K-CD01 - page 22

    22 | English Connecting W ires to T erminals ANT CONT P.CONT MUTE FRONT L FRONT R REAR L REAR R – + FRONT REAR FM/AM antenna input Subwoofer left output ( White) Subwoofer right output (Red) F use (10A) Wiring harness (Accessory 1 ) Ignition wire (Red) Battery wire ( Y ellow) Ground wire (Black) - ( T o car chassis) Ignition key switch Car fuse b ...

  • Kenwood K-CD01 - page 23

    English | 23 M Installation • When you install or remove the unit, hold the chassis (Metal part) to conduct the operation. If you hold the control panel, it may cause damage. non-Japanese cars Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) ...

  • Kenwood K-CD01 - page 24

    24 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is r emoved, remove the lower two locations. • The frame can be removed from the bottom side in the same manner ...

  • Kenwood K-CD01 - page 25

    English | 25 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ After checking for shor t circuits in the wires , repla ...

  • Kenwood K-CD01 - page 26

    26 | English Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 4) of the section on 'Safety precautions' . ? The specified disc does not ...

  • Kenwood K-CD01 - page 27

    English | 27 Specifications subject to change without notice. Specifications Audio section Maximum output power : 40 W x 4 F ull Bandwidth Power (at less than 1% THD) : 26 W x 4 T one ac tion Bass : 100 Hz ±9 dB Middle : 500 H z ±9 dB T reble : 10 kHz ±9 dB Pr eout level / Load (during disc play) : 2000 mV/10 kΩ Pr eout impedance : ≤ 600 Ω ...

  • Kenwood K-CD01 - page 28

    B64-2923-00_U.S.Indd 28 04.9.3, 4:23:55 PM ...

メーカー Kenwood カテゴリー CD Player

Kenwood K-CD01のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- K-CD01の取扱説明書
- Kenwoodの製品カード
- パンフレット
- またはKenwood K-CD01の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Kenwood K-CD01の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Kenwood K-CD01の取り付け説明書、サービスマニュアル、簡易説明書、またはKenwood K-CD01のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Kenwood K-CD01の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Kenwood K-CD01デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKenwood K-CD01を使用するのを助ける技術的文書のことです。説明書は通常、全てのKenwood K-CD01ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Kenwoodの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Kenwood K-CD01の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKenwood K-CD01の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Kenwood K-CD01に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Kenwood K-CD01デバイスの基本機能を使うにあたってのヒント。 Kenwood K-CD01のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Kenwood K-CD01に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKenwood K-CD01のメーカー/サービスへの連絡先に関する情報。

Kenwood K-CD01についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKenwood K-CD01の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKenwood K-CD01で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)