HP 3C339の取扱説明書

30ページ 0.08 mb
ダウンロード

ページに移動 of 30

Summary
  • HP 3C339 - page 1

    TokenLink Velocity PCI Network Interface Card 3C33 9 Installation Guid e ...

  • HP 3C339 - page 2

    Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for inc ...

  • HP 3C339 - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name: tlvmp339.dos DOS and MS-Windows for Workgroups 3.11 media . • ...

  • HP 3C339 - page 4

    1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast Etherlink/Etherlink III Bus Maste r 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set th ...

  • HP 3C339 - page 5

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols . Device Configuratio n • ...

  • HP 3C339 - page 6

    1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” and press “OK. ” 12 At the “Network” dialogue box, click on the “Identification” folder . 13 Enter your “Co ...

  • HP 3C339 - page 7

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name : tlvmp339.dos DOS and MS-Windows for Workgroups 3.11 media . ? ...

  • HP 3C339 - page 8

    2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast Etherlink/Etherlink III Bus Maste r 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set th ...

  • HP 3C339 - page 9

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, an d NWLink NetBIOS transfer protocols . Device Configuratio n • ...

  • HP 3C339 - page 10

    2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Insert the 3C339 drivers diskette and set path to “A:” and hit Enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” 12 and press “OK. ” 13 At the “Networ ...

  • HP 3C339 - page 11

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver. 5.0. DOS ODI - File Name: Tl3c3x9.dos Size: 52KB Da ...

  • HP 3C339 - page 12

    3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.” (If you have an HP preloaded HDD, set path to “C:MastersLanDrv3C339NWCLIENT ) 10 Press “Enter ...

  • HP 3C339 - page 13

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols . Device Configura ...

  • HP 3C339 - page 14

    3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box . 13 Insert the 3COM Software “Etherli ...

  • HP 3C339 - page 15

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.51 and Service Pack Media . • Microsoft Windows NT Server 3.51 ...

  • HP 3C339 - page 16

    3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, se ...

  • HP 3C339 - page 17

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.0 and Service Pack Media . • Microsoft Windows NT Server 3.51 machine that support ...

  • HP 3C339 - page 18

    3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set path to ...

  • HP 3C339 - page 19

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver. 5.0. DOS ODI - File Name: Tl3c3x9.dos Size: 52KB Da ...

  • HP 3C339 - page 20

    4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.” (If you have an HP preloaded HDD, set path to “C:MastersLanDrv3C339NWCLIENT ) 10 Press “Enter ...

  • HP 3C339 - page 21

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols . Device Configurati ...

  • HP 3C339 - page 22

    4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box . 13 Insert the 3COM Software “Etherlin ...

  • HP 3C339 - page 23

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.51 and Service Pack Media . • Microsoft Windows NT Server 4.0 ma ...

  • HP 3C339 - page 24

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set ...

  • HP 3C339 - page 25

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.0 and Service Pack Media . • Microsoft Windows NT Server 4.0 machine that supports ...

  • HP 3C339 - page 26

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set path to ...

  • HP 3C339 - page 27

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 ...

  • HP 3C339 - page 28

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 ...

  • HP 3C339 - page 29

    ...

  • HP 3C339 - page 30

    Version Number 3COM 339 Rev. 1 ...

メーカー HP カテゴリー Network Card

HP 3C339のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 3C339の取扱説明書
- HPの製品カード
- パンフレット
- またはHP 3C339の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、HP 3C339の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、HP 3C339の取り付け説明書、サービスマニュアル、簡易説明書、またはHP 3C339のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、HP 3C339の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

HP 3C339デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHP 3C339を使用するのを助ける技術的文書のことです。説明書は通常、全てのHP 3C339ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

HPの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. HP 3C339の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHP 3C339の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。HP 3C339に関してこのドキュメントで見つけることができる全てのヒントの目次
3. HP 3C339デバイスの基本機能を使うにあたってのヒント。 HP 3C339のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。HP 3C339に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHP 3C339のメーカー/サービスへの連絡先に関する情報。

HP 3C339についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHP 3C339の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHP 3C339で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)