Autopage RS-725LCDの取扱説明書

24ページ 0.78 mb
ダウンロード

ページに移動 of 24

Summary
  • Autopage RS-725LCD - page 1

    1 RS - 725 LCD PROFESSIONAL REMOTE CAR STARTER WITH ALARM SYSTEM & 2 - WAY LCD COMMUNICATION OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY ...

  • Autopage RS-725LCD - page 2

    2 TABLE OF CONTENTS: LCD REMOTE TRANSMITTER : A BATTERY REPLACEMENT 5 B THE REMOTE LCD ICONS WITH FUNCTION 6 C PROGR AMMING OF THE LCD REMOTE TRANSMITTER 1. Screen Lamp ON 2. Power Save Mode 3. Clear The Flash Icon and Melody Sound 4. Stop The Melody Sound. 5. Button Lock 6. Vibration / Melody Mode 7. Enable / Disable Bi Sound While Pressing Button ...

  • Autopage RS-725LCD - page 3

    3 Noise Abatement Circuit 15 O ANTI CAR - JACKING Active Anti Car Jacking Passive Anti Car Jacking Trigger The Anti Car Jacking Mode Override The Syst em To Turn Off Anti Car Jacking 16 16 16 16 16 P SYSTEM’S TRIGGER CHECK 16 Q SYSTEM’S STATUS CHECK 16 R DRIVER PAGING (OPTION) 16 S DOME LIGHT CONVENIENCE DELAY & SUPERVISION 17 T IGNITION CO ...

  • Autopage RS-725LCD - page 4

    4 TRANSMITTERS The RS725 comes with two transmitters. The XT72LCD is a 2 - way transmitter and receiver, also referred to as a transceiver. The XT - 33 is a mini - size 1 - way transmitter. Both operate on the AM band with a code - rolling feature that will prevent any illegal use of a code - grabber attempting to record and steal the codes of your ...

  • Autopage RS-725LCD - page 5

    5 WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do no ...

  • Autopage RS-725LCD - page 6

    6 B. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Your vehicle doors are locked Door Unlock Your vehicle doors are unlocked and the system is Disarmed Armed Mode Your vehicle is in armed mode Valet Mode All the function shall be temporarily on hold. Remote Transmission You are transmitting the signal to control unit In – Range Indicator Your are ...

  • Autopage RS-725LCD - page 7

    7 C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button Description Operation (1 second) LCD screen lamp turns on for 5 seconds. Press and hold for 1 second 1 melody sound to confirm en ters. ( 3 seconds) Timer Programming Mode. Press and hold for 3 seconds 2 - melody sounds to confirm enter. ( 5 seconds) Power Save Mode Press and hold f ...

  • Autopage RS-725LCD - page 8

    8 6. Vibration / Melody Mode: This is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control. In this mode, the remote control vibrates itself if your security system is triggered. Press the button first, within 3 seconds press and hold ( ) button for 2 seconds to select the mode of vibration or melo ...

  • Autopage RS-725LCD - page 9

    9 D. CLOCK & TIMER SETTING: Transmitter Button Descripti on Press Transmitter Button 1 Press & Hold button for 3 seconds Clock Setting (Hour) *Flash digit for adjusting for – and for + Press button once Time setting (Minute) *Flash digit for adjusting for – and for + 2 Press button once. Al ert Alarm Time Setting (Hour) *Flash digit for ...

  • Autopage RS-725LCD - page 10

    10 3. Count Down Timer Setting: Example - Set the countdown timer at 2:30 1. Press & hold the button for 3 seconds, two - melodies will sound and the “Hours” digit will flash for adjustment. 2. Press the button 5 times, the LCD screen will show the icon and the “Hours” digit flashes for adjustment. 3. Press or button to decrease or incr ...

  • Autopage RS-725LCD - page 11

    11 - Passive Arming By - pass While the system Disarmed. Activate or Turn Off The Remote Sta rt Press twice within 3 seconds. + Channel # 4 Timer Output ( 4 ) Optional II Switching code For 2nd Car Operation . For regular remote transmitter Only B. LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark - ( C) System’s T ...

  • Autopage RS-725LCD - page 12

    12 4. Passive Starter Disable Fast Flash Disable 5. Panic Alarming Flashes Flashes 6. Car - Jacking Alarming Flashes Disable Flashes 7. Car Locator 6 Chirps 12 Flashes Locking G. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is n ow arm ...

  • Autopage RS-725LCD - page 13

    13 by - pass, press the transmitter or button s and the system will return to normal status. I. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed. The vehicle’s doors will unlock and the dome light ...

  • Autopage RS-725LCD - page 14

    14 4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet Switch. 5. Turn the ignition switch “OFF” position. 4 Chirps f rom siren/horn and 3 flashes from the parking lights will indicate the system has disarmed. Note 1: You must override the alarm within 60 seconds. If not, the system will automatically r ...

  • Autopage RS-725LCD - page 15

    15 2. During panic mode, the normal function of this transmitter button will be disabled. The transmitter and buttons can be used to lock and unlock the door (if the option is installed), however once the button is pressed, the vehicle’s starter disable device, (where installed) will be disengaged allowing the vehicle to start. 3. To stop the ala ...

  • Autopage RS-725LCD - page 16

    16 O. ANTI CAR - JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. T his system is default setting all car jacking “OFF”. ACTIVE ANTI CAR JACKING: 1. Press and hold the transmitter and button s at the same time for 2 seconds while the vehicle’s ignition is ON. ...

  • Autopage RS-725LCD - page 17

    17 Out of Car Driver Paging (Optional Feature) If someone tries to page you by tapping the paging (knock) sensor (OPTIONAL) which is usually mounted on t he bottom part of front window, the paging melody sound continues sounding from you Remote LCD Transmitter and the “ ” icon will flash on the LCD screen. 1. Press the transmitter button first, ...

  • Autopage RS-725LCD - page 18

    18 X. S ECOND VEHICLE SECURITY OPERATION: Your 5 - button remote transmitter can be utilized to control a second vehicle security system, To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. Programming the Transmitter to 2 nd Car Enter: 1. Turn the ignition key ON 3 times . (Finishing ...

  • Autopage RS-725LCD - page 19

    19 REMOTE START OPERATION: A. TO REMOTE START THE VEHICLE: When you want to start your vehicle, 1. Press button once on the transmitter. 2. The parking light will activate to indicate the remote start received the signal. 3. The engine will start in app roximately 5 seconds. 4. Once the engine is running, after couple seconds the parking lights wil ...

  • Autopage RS-725LCD - page 20

    20 2. Before turning off the engine, press and release and buttons at the same time . -- The LED will flash indicating the remote start has entered the turbo charge mode . 3. Take the “Ignition Key” from the key cylinder. -- Engine keeps running. -- 4. Exit and secure the vehicle. -- Engine continues running until the pre - programmed time elap ...

  • Autopage RS-725LCD - page 21

    21 F . TEMPERATURE CHECK (OPTIONAL) If you installed the optional temperature sensor, you can monitor, Through the LCD screen, the present indoor temperature of the passenger compartment before cooling or heating your vehicle. Press the transmitter buttons first, within 3 seconds press ( ) button; the in - door temperature will be shown on the LCD ...

  • Autopage RS-725LCD - page 22

    22 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your Aut o Page equipment is guaranteed for “life” to the original purchaser/user of the equipment and the original vehicle in which it was in ...

  • Autopage RS-725LCD - page 23

    23 This WARRANTY CARD is for your record. However, Auto Page reserves the right to request you to su bmit this WARRANTY CARD, which must have complete information to receive warranty service. Please keep this card in a secured place . AUTOPAGE WARRANTY SERVICE CARD Model: _______________ Serial # _______________ CUSTOMER TO COMPLETE DEALER TO COMP ...

  • Autopage RS-725LCD - page 24

    24 960 Knox Street Unit B Torrance, California 90503 Main Office: 310 - 323 - 1800 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.com ...

メーカー Autopage カテゴリー Remote Starter

Autopage RS-725LCDのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RS-725LCDの取扱説明書
- Autopageの製品カード
- パンフレット
- またはAutopage RS-725LCDの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Autopage RS-725LCDの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Autopage RS-725LCDの取り付け説明書、サービスマニュアル、簡易説明書、またはAutopage RS-725LCDのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Autopage RS-725LCDの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Autopage RS-725LCDデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAutopage RS-725LCDを使用するのを助ける技術的文書のことです。説明書は通常、全てのAutopage RS-725LCDユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Autopageの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Autopage RS-725LCDの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAutopage RS-725LCDの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Autopage RS-725LCDに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Autopage RS-725LCDデバイスの基本機能を使うにあたってのヒント。 Autopage RS-725LCDのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Autopage RS-725LCDに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAutopage RS-725LCDのメーカー/サービスへの連絡先に関する情報。

Autopage RS-725LCDについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAutopage RS-725LCDの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAutopage RS-725LCDで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)