-
Atomic 112 - page 1
Owner’s Manual Atomic Amplifiers Reactor 112 Copyright 2005 ...
-
Atomic 112 - page 2
II Index Introduct ion .............................................................................. 1 Product Su mmary ..................................................................... 1 The Amplifier / Speaker ......................................................................................... 1 Docking System .......................... ...
-
Atomic 112 - page 3
1 Introduction Congratulations on your purchase of an Atomic Reactor 112, a major step in bringing vacuum tube analog musicality to the digital world. The Reactor 112 is an extremely versatile musical instrument that provides a live performance pl atform for your modeling tools and instrument processors. The Reactor 112 is clearly different from ot ...
-
Atomic 112 - page 4
2 Getting Started Unpacking If you are reading this manual you have probably al ready opened your Reactors shipping carton. Now would be a good time to familiarize yourself with the things that are inside the carton. What’s in the Box Every Reactor 112 comes from the factory shipped complete with a DS-1 docking unit and the following items: 1. Ow ...
-
Atomic 112 - page 5
3 Controls & Connections (Top) X POWER: The power switch turns the power OFF & ON to the Reactor 112. It also acts as the master power switch for the modeler when connected and housed in the DS-1 (see page 6). Y INPUT: This is where you plug in your instrument cable when docking a modeler inside the DS-1. NOTE! When using a modeler outside ...
-
Atomic 112 - page 6
4 Controls & Connections (Rear) RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 112 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! X VOLTAGE SELECTOR SWITCH: The Reactor 112 has a voltage selector switch and can be used in most countries. T he switch selects between 115Volts (US use) and 240Volts (European use). IMPORTANT! For ...
-
Atomic 112 - page 7
5 The DS-1 Atomic’s philosophy is to afford its’ customer s the opportunity to choose the brand of modeler or preamp that they prefer, and thus enjoy the sonic characteristics that they demand. The DS- 1 allows Atomic Reactor Series amplifiers to act as a platform for select digital amp modelers and other types of related equipment. When using ...
-
Atomic 112 - page 8
6 Installing a Modeler into the DS-1 X Screw the 3 thumbscrews labeled “A”, "B” &”C”, into the corresponding holes located on the bottom of the DS-1. Y Attach the 3 rounded mushroom heads caps to the ends of the locking screws. * *A set of mushroom heads come shipped with each Reactor 112. Z Position the proper docking template o ...
-
Atomic 112 - page 9
7 Basic Set Up X After obtaining the proper template load your modeler into the DS-1 provided with your Reactor 112. (Make sure the modelers power switch is set to on.) Y Load the DS-1 into the docking bay located in the top of your Reactor, making sure that the dock locks cl ick into position. Once loaded properly the audio and power connections a ...
-
Atomic 112 - page 10
8 Expanding Your Rig Installing a Blank Template into the DS-1 X First locate the 8 screws attaching the template frame to the top of the DS- 1. There are 4 screws that come in groups of 2 on each side. Remove these screws (and don’t lose them!) using a properly sized Phillips-head screwdriver. Y Remove the template frame of the DS- 1 Still got t ...
-
Atomic 112 - page 11
9 Desktop Modeler in Stereo RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 11 2 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 11 2 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! PLEASE NOTE! * If you wish to use a pair of Reactors in MONO, simply use the SEND – L ...
-
Atomic 112 - page 12
10 Floorboard Style Modelers RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 11 2 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 11 2 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! X Using two Reactor 112s Install blank templates onto the DS-1 docking units. (see page ...
-
Atomic 112 - page 13
11 Pro Rack Type Modelers or Preamps RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 112 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! RETURN SEND - L EFFECTS LOOP SEND - R MODEL REACTOR 112 Atomic Amplifiers LLC. Orange CT. FUSE 0101010101 !CAUTION! X Using two Reactor 112s Install blank templates onto the DS-1 docking units. (se ...
-
Atomic 112 - page 14
12 Tips & Insights Your Modeler’s Settings: The Reactor 112 was designed to bring out the very best in your modeler. Atomic recommends that in order to achieve the best sounding result s, modeler’s should be used in their “direct” mode. To achieve the most realistic/natural amp and effect sounds, cabinet and mic simulations can stay “ ...
-
Atomic 112 - page 15
13 Downloading Custom Tones: The Reactor 112 was designed to bring out the very best in your modeler. That means the one you own. As the Reactor has become the industry standard for taking modeling tools live some manufacturers have expressed interest in develop ing presets for their modelers that are Reactor specific. Since the DS-1 and the Reacto ...
-
Atomic 112 - page 16
14 Good Housekeeping Output Tube Bias Your new REACTOR 112 has an internally mounted variable bias control. The bias control is used to set the idle current in the output tubes, pr operly matching amp’s performance characteristics to the type of tubes used. Each different tube brand and manufacturer may require a slightly different bias setting. ...
-
Atomic 112 - page 17
15 Reactor 112 Specifications US: 115V AC, 50/60 Hz 45W POWER REQUIREMENTS: EU: 240V AC, 50 Hz 45W AMPLIFIER POWER OUTPUT: 18W into 8 ohms at 3% THD 175 mv (-13db) at 1000 Hz POWER AMP INPUT SENSITIVITY (RETURN): for 18watts output POWER AMP INPUT IMPEDANCE : 56 K ohm TUBES: Two EL84 tubes (Power Tubes) One 12AX7A tube (Phase Inverter) 2A 250V at 1 ...
-
Atomic 112 - page 18
16 Trouble Shooting Reactor does not power up. 1) Is the power cord properly plugged into an electrical outlet? 2) Is there power at the outlet? 3) Is the power cord firmly inserted into the AC input socket on the rear panel? 4) Is the fuse blown? The Reactor powers up but the modeler does not. 1) Is the Dock power cord the correct match to the mod ...
-
Atomic 112 - page 19
17 Contact Atomic Atomic Amplifiers LLC 476 Grace Trail Orange, CT 06477 (Phone) 212.426.1090 (E-mail) support@atomicamps.com (Web) www.atomicamps.com Record Your Purchase Info: * Atomic Amplifiers Reactor 112 Serial Number: Date Purchased: / / Purchased From: Receipt Number: *Make sure that you fill out and mail-in your product registration card. ...
-
Atomic 112 - page 20
18 Warranty Atomic Amplifiers warrants to the original purcha ser t hat this product (exclusive of speake rs an d tubes) will be free of defects in material and workm anship for a peri od of 5 years from the or iginal date of purch ase. Atomic Amplifiers warrants to the orig inal purchaser of this product that the speakers will be free of defects i ...
Atomic 112についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもAtomic 112の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAtomic 112で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。