ページに移動 of 76
O WNER ’ S O PERA TING M ANU AL Flat Panel Display Monitor & Pixel-For-Pixel TM Controller with Vivix TM T echnology TM PL-61cx ...
T a ble of Contents Introduction Important Inf ormation Limited W arranty How to Attach Options to the Plasma Monitor ................................................................................................... 1 Part Names and Function .......................................................................................................... ...
OSM (On Screen Menu) Contr ols ....................................................................................................................... 29 Menu Operations ................................................................................................................................................ 29 Menu T ree ..................... ...
Intr oduction Introduction to the Runco PlasmaW all™ PL-61cx Plasma Display Monitor The PL-61cx is a state-of-the-art DTV ready , at-panel plasma display monitor . The 61-inch widescreen offers a resolution of 1365 x 768 with a 16:9 aspect ratio. The PL-61cx is one of the few plasma display products capable of high altitude performance, being ...
Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. This symbol warns the user t ...
T o avoid damage and prolong operating life: 1 . Use only with 120V 50/60Hz AC power supply . Continued operation at line voltages greater than 120 V olts AC will shorten the life of the unit, and might even cause a fire hazard. 2. Handle the unit carefully when installing it and do not drop. 3. Set the unit away from heat, excessive dust, and dire ...
THREE YEAR LIMITED WARRANTY For Plasma Display Monitors Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’ s Finest Home Theater Products”. With proper installation, setup and care, you should enjoy many years of unparalleled video performance. This is a LIMITED W A ...
CAUTION: THIS LIMITED W ARRANTY ONL Y COVERS RUNCO PRODUCTS PURCHASED FROM AND INST ALLED BY RUNCO AUTHORIZED DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALL Y EXCLUDED FROM COVERAGE UNDER THIS LIMITED W ARRANTY . MOREOVER, DAMAGE RESUL TING DIRECTL Y OR INDIRECTL Y FROM IMPROPER INST ALLA TION OR SETUP IS SPECIFICALL Y EXCLUDED FROM COVERAGE UNDER THI ...
TW O YEAR LIMITED WARRANTY For Projectors, V ideo Processors and Controllers Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products”. With proper installation, setup and care, you should enjoy many years of unparalleled video performance. T ...
CAUTION: THIS LIMITED WARRANTY ONL Y COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALL Y EXCLUDED FROM COVERAGE UNDER THIS LIMITED W ARRANTY . MOREOVER, DAMAGE RESUL TING DIRECTL Y OR INDIRECTL Y FROM IMPROPER INST ALLA TION OR SETUP IS SPECIFICALL Y EXCLUDED FROM COVERAGE UNDER THIS LIMITED W ARRANTY ...
1 Y ou can attach your optional mounts or stand to the plasma monitor in one of the following two ways: 1) While it is upright. (See drawing A) 2) As it is laid down with the screen face down (See drawing B). Lay the protective sheet, which was wrapped around the plasma monitor when it was packaged, beneath the screen surface so it does not scratch ...
P ar t Names and Function 2 F r ont V iew 1 PO WER T urns the plasma monitor’ s power on and of f. 2 Remote sensor window Recei ves the signals from the remote control. 3 PO WER / ST ANDBY indicator When the po wer is on it will light GREEN. When the po wer is in the standby mode, it will light RED. 4 INPUT SELECT / EXIT Switches the input, in th ...
3 R ear View / T er minal Boar d SPEAKERS MUST HAVE MORE THAN 7WATT RATING IMPEDANCE 6 OH M RIGHT LEFT AC IN SPEAKERS MUST HAVE MORE THA N 7WATT RATING IMPEDANCE 6 OH M RIGHT LEFT AC IN A B VIDEO ( IN /OUT ) VIDEO 1 VIDEO 2 VIDEO 3 AUDIO 1 DVD 1 / HD 1 R ( MONO ) L Y Cb/Pb Cr /Pr RGB 2 / DVD 2 / HD 2 RGB 1 R/ VD G/ B/ HD ( IN / OUT ) DV I ( Digital ...
4 → VIDEO1 → VIDEO2 → VIDEO3 POWER ON/OFF Switches Power ON/OFF . (This does not operate when POWER/ST ANDBY indicator of the main unit is of f.) DVD / HD Press this button to select DVD/HD as the source. The available sources depend on the setting of “ BNC INPUT ”. RGB: COMP .: DVD/HD can also be selected using the INPUT SELECT button on ...
Use of Installation Remote Control The Installation remote has been included with the PL-61cx in order to allow the adjustment of size and position for HDT V signals, or any other high-resolution signal sent into the “HDTV/Computer” port on the Controller . Do not use this remote to make color balance adjustments or any other image quality adju ...
6 Battery Installation and Replacement Insert the 2 “ AAA ” batteries, making sure to set them in with the proper polarity . 1. Press and open the cover . 2. Align the batteries according to the (+) and ( – ) indication inside the case. 3.Replace the cover . ...
7 Using the wired remote control mode Connect the remote cable* to the remote control’ s remote jack and the “REMOTE IN” terminal on the monitor . When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control is used, the remote control can be operated even if no batteries are loaded. Oper ...
Plasma Monitor Installa tion 8 VIDEO ( IN / OUT ) VIDEO 1 VIDEO 2 VIDEO 3 AUDIO 1 DVD 1 / HD 1 R ( MONO ) L Y Cb/ Pb Cr / P r RGB 2 / DVD 2 / HD 2 RGB 1 R/ VD G/ B / HD ( I N / OUT ) DV I ( Digital RGB ) AUDIO 2 R ( MONO ) L AUDIO 3 R ( MONO ) L Cr/Pr Y Cb /P b RGB 3 External Control I N OUT REMOTE VCR or Laser Disc Player VIDEO 1-3 DVD Player IBM ...
9 Connecting Y our PC or Macintosh Computer Connecting your PC or Macintosh computer to your plasma monitor will enable you to display your computer ’ s screen image for an impressive presentation. The plasma monitor supports the signals described on page 7 of Model Information. T o connect a PC, Macintosh or compatible graphics adapter , simply: ...
10 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 Pin Assignments and Signal Levels for 15 pin RGB (Analog) Pin Configuration and Signal of the RGB 3 Connector (DVI Connector) The unit is equipped with a type of connector commonly used for digital. (This cannot be used for an analog input.) (TMDS can be used for one link only .) Signal (Analog) Red Green or s ...
11 Note: 1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT . When LOOP OUT is ON, do not connect an OUTPUT signal fr om another unit, that will place an extraor dinary load on the other unit and may damage it. 2. LOOP OUT can not be turned ON while signals ar e input to RGB1 terminal. 3. LOOP OUT can be turned ON while signals ...
PFP™ Contr oller Installa tion & Ov er all Description The PL-61cx system consis t s of the PFP Controller and the PL-61cx Plasma monitor . This system is unique in the way it is controlled; the control center for this system is located within the PFP™ Controller . The Controller tells the Plasma to turn on or off, controls it s brightness, ...
13 PFP™ Contr oller Description F r ont Panel m e n u ratio ratio i n p u t e n t e r > < < < PIXEL FOR PIXEL TM 1 2 3 4 5 6 7 8 9 10 1. IR RECEIVER Receives the infrared signal from the remote control. 2 . POWER BUTT ON T urns the unit ON or OFF . The Main Power switch on the rear of the unit must be on first for this button to be ac ...
R ear Panel 12V TRIGGER 12V FUSE RGB OUTPUT VIDEO INPUTS RS-232 IN MADE IN USA AC 120V 60Hz, 15W MASK SCREEN HDTV COMPOSITE V H B G R Y Pr Pb S-VIDEO MADE IN USA RUNCO INTERNATIONAL UNION CITY , CA CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE CENTER. AVI ...
PFP™ Contr oller R emote Description A. IR OUTPUT INDICA TOR Illuminates when a button is pressed, indicating that an IR signal is being transmitted. B. POWER BUTTON T oggles the power on and off. For a discreet on or of f command, you can use the direct access buttons (see 'J'). Note: When the main AC power switch is first turned ON, t ...
Quic k Set-up Guide Connection Examples 12V TRIGGER 12V FUSE RGB OUTPUT VIDEO INPUTS RS-232 IN MADE IN USA AC 120V 60Hz, 15W MASK SCREEN HDTV COMPOSITE V H B G R Y Pr Pb S-VIDEO MADE IN USA RUNCO INTERNATIONAL UNION CITY , CA CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SER VICING TO Q ...
Menu Description and Na viga tion INPUT SELECT S tandard Video: Composite S-Video Component High Definition: Component RGB ASPECT RA TIO SELECT INST ALLER ADJUST * Menu T r ee Anamorphic S tandard 4:3 Letterbox Virtual Wide T int Color Brightness Contrast Sharpness Luma Enhance * Chroma Enhance * Color Balance * The menu tree above is an overall gl ...
Pictur e Quality Adjustments Main Menu T int Color Brightness Contrast Sharpness Luma Enhance * Chroma Enhance * Color Balance * Picture quality adjustments (also known as "Front Panel Controls") are the controls that change dif ferent parameters of the image such as the amount of color , black level, etc. While these adjustments can be s ...
TINT (also known as 'hue') is essentially the ratio of red to green in the color portion of the image. If TINT is decreased, the image will appear redder , and increasing it will cause the image to appear green- er . T o set TINT properly , look at the color bar pattern through a blue filter . Adjust TINT until the middle two tall color b ...
SHARPNESS adjusts the amount of high-frequency det ail in the image. This can be adjusted to the prefer- ence of the user . Keep in mind that when SHARPNESS is decreased, fine details in the image will become 'soft'; when it is increased, fine det ails will become sharper but will also make the picture appear 'noisy' if adjusted ...
The Installation menu is where you can adjust the image orient ation, adjust keystone and even check the age of the lamp in the Plasma. When the Controller is turned on for the first time, the INST ALLA TION item will not appear in the main menu. T o enable the INST ALLA TION menu, there are two options: · With the processor ON and no menus on-scr ...
The example on the previous page shows what would happen on a widescreen display if a small 4:3 image were used more often than widescreen images. T o minimize this problem, the PL-61cx can provide SIDE BARS, which will put grey bars up on either side of a small 4:3 image (see 'side bar area' in the drawing above). This illuminates the ot ...
23 The OUTPUT SHIFT function shifts the entire image (including sidebars) up, down lef t or right. When you are center- ing the overall image, use output shift. If an image needs to be centered within the sidebars, use INPUT SHIFT (see below). Output Shift Input Shift The INPUT SHIFT function shifts the video signal before it is processed. This is ...
System R eset In the event that your PL-61cx appears to have a so f tware problem, or adjustmen t s have been made so far out of range that the image is no longer on-screen or discernable, you can reset the processor back to factory values. This sets ALL settings back to factory values, so any adjustments made previously will be lost. T o reset you ...
25 Basic Operations POWER T o turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet. 2. Press the Power button (on the unit). The monitor ’ s POWER/ST ANDBY indicator turns red and the standby mode is set. 3. Press the POWER ON button (on the remote control) to turn on the unit. The monitor ’ s POWER/ST ANDBY indicator ...
26 OFF TIMER T o set the off timer: The off timer can be set to turn the power of f after 30, 60, 90 or 120 minutes. 1. Press the OFF TIMER button to start the timer at 30 minutes. 2. Press the OFF TIMER button to the desired time. 3. The timer starts when the menu turns off. → 30 → 60 → 90 → 120 → 0 OFF TIMER 30 T o check the remaining t ...
27 Wide Screen Operation (manual) W ith this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the WIDE button on the remote control. 2. W ithin 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → FULL → ST ADIUM → ZOOM → 2.35:1 → 14:9 When a 720P ...
28 FULL size screen The image is expanded in the horizontal and vertical direction. ZOOM size screen When wide signals are input. TRUE The image is true resolution. FULL Information Supported resolution See page 56 of Model Information for details on the display output of the various VESA signal standards supported by the monito r . “ PIC ...
29 Menu Operations The OSM window is displayed with respect to the screen as shown on the diagram. * Depending on the screen ’ s mode, the OSM may be displayed differently . In the explanation, the OSM section is shown close up. MAIN MENU 1 / 2 MENU/ENTER EXIT PICTURE AUDIO IMAGE ADJUST OPTION1 ADV ANCED OSM NEXT PA GE : OFF SEL. EXIT OK The foll ...
30 Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE PICTURE CONTRAST ←→ YES 18 BRIGHTNESS ←→ YES 18 SHARPNESS ←→ YES 18 COLOR ←→ YES 18 TINT ←→ YES 18 PICTURE MODE BRIGHT/NORMAL/THEAT .1/THEA T .2/DEFAUL T YES 18 NR OFF/NR-1/NR-2/NR-3 YES 19 COLOR TEMP LOW/MID LOW/MID/HI ...
31 *1 Only when AUTO PICTURE is OFF *2 RGB/PC only *3 Cannot be set in some models. Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE OPTION2 PWR. MGT . OFF ←→ ON YES 26 CINEMA MODE OFF ←→ ON YES 27 LONG LIFE PLE AUTO/LOCK 1/LOCK 2/LOCK 3 YES 27 ORBITER AUTO 1 YES 28 AUTO 2 YES 28 MANUAL H-DOT/V-LINE/TIME YES 28 OFF YES 28 ...
32 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast 1. On the MAIN MENU, select “ PICTURE ” , then press the MENU/ENTER button. The “ PICTURE ” screen appears. 2. Use the ▲ and ▼ buttons to select “ CONTRAST ” . PICTURE 1 / 2 E ...
33 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor . Example: Setting “ NR-3 ” 1. On the MAIN MENU, select “ PICTURE ” , then press the MENU/ENTER button. The “ PICTURE ” screen appears. 2. Use the ▲ and ▼ buttons to sele ...
34 Changing the Gamma Curve This feature adjusts the brightness of the midtone areas while keeping shadows and highlights unchanged. Example: Setting “ 3 ” Set “ ADV ANCED OSM ” to “ ON ” in the MAIN MENU (1/2), then perform the following operations. 1. On the MAIN MENU, select “ PICTURE ” , then press the MENU/ENTER button. The “ ...
35 Adjusting the colors Use this procedure to adjust hue and color density for red, green, blue, yellow , magenta and cyan. Y ou can accentuate the green color of trees, the blue of the sky , etc. Example: Adjusting the color tune for blue Set “ ADV ANCED OSM ” to “ ON ” in the MAIN MENU (1/2), then perform the following operations. 1. On t ...
36 Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting “ AUDIO INPUT1 ” to “ VIDEO 2 ” 1. On the MAIN MENU, select “ AUDIO ” , then press the MENU/ENTER button. The “ AUDIO ” screen appears. 2. Use the ▲ and ▼ buttons to select “ AUDIO INPUT1 ” . 3. T ...
37 Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: T urning the DISPLA Y OSM of f 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” menu appears. 2. Use the ▲ and ▼ buttons to select “ OSM ” , then ...
38 Setting the BNC connectors Select whether to set the input of the 5 BNC connectors to RGB and component. Example: Set the BNC INPUT mode to “ COMP . ” 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” screen appears. 2. Use the ▲ and ▼ buttons to select “ BNC INPUT ” . 3. T o set the ...
39 Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080. Example: Setting the “ 1080B ” mode to “ 1035I ” 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” screen appears. ...
40 Resetting to the default values Use these operations to restore all the settings (PICTURE, AUDIO, IMAGE ADJUST , OPTION1~3, etc) to the factory default values. 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” screen appears. 2. Use the ▲ and ▼ buttons to select “ ALL RESET ” . OPTION1 1 ...
41 Power management mode On Off T urning the picture back on Picture already on. Operate the keyboard or mouse. The picture reappears. POWER/ ST ANDBY indicator Green Red Power management operating status Not activated. Activated. Description Horizontal and vertical synchronizing signals are present from the computer . Horizontal and/or vertical sy ...
42 ORBITER Use this to set the picture shift. Example: Setting “ ORBITER ” to “ AUTO1 ” Perform Steps 1-2 of LONG LIFE, then... 3. Use the ▲ and ▼ buttons to select “ ORBITER ” . 4. Use the and buttons to select “ AUTO1 ” . The mode switches as follows each time the or button is pressed: → OFF ↔ AUTO1 ↔ AUT ...
43 Setting the time for INVERSE/WHITE Set a time duration. Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half. Perform Steps 1-3 of INVERSE, then... 4. Use the and buttons to select “ ON ” , then press the MENU/ENTER button. THE “ INVERSE/WHITE ” screen appears. 5. Adjust the time using ...
44 Information Setting the time WORKING TIME ..... Set the time duration for “ SCREEN WIPER ” . When the WORKING TIME is set to “ ON ” the mode will stay on. W AITING TIME ...... Set the standby time until the “ SCREEN WIPER ” mode starts. SPEED ................ Set the moving speed for the “ SCREEN WIPER ” . The speed decreases ...
45 Setting the picture size for RGB input signals Use this procedure to switch the setting to “ ON ” or “ OFF ” . * Cannot be set in some models. Example: Setting the “ PICTURE SIZE ” mode to “ OFF ” Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select ? ...
46 Option3 Settings Menu Using the timer This function sets the monitor to turn ON/OFF automatically at a set time. Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “ OPTION3 ” , then press the MENU/ENTER button. The “ OPTION3 ” screen appears. 2. Use the ▲ ...
47 FUNCTION ............. Set the LONG LIFE function. T o reset the program Align the cursor with the DA TE field that you wish to reset, then press the CLEAR button. T o reset the data Align the cursor with the field (ON/OFF/INPUT/ FUNCTION) that you wish to reset, then press the CLEAR button. Special characters in the PROGRAM TIMER sc ...
48 Information PWR. ON MODE settings LAST ................ Last mode (the mode that was last selected at the time the power was switched off). VIDEO1, 2, 3 .... VIDEO input mode. RGB1, 2, 3 ....... RGB input mode. HD/DVD1, 2 ..... HD/DVD input mode. Restoring the factory default settings Select “ ALL RESET ” under the OPTION1 menu. Note ...
49 Loop Out setting When this feature is set to ON, the received signal will be looped out. Example: Setting “ ON ” Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “ OPTION3 ” , then press the MENU/ENTER button. The “ OPTION3 ” screen appears. 2. Use the ...
50 Video W all setting Use this feature to configure a 2 × 2 or 3 × 3 video wall. Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “ OPTION3 ” , then press the MENU/ENTER button. The “ OPTION3 ” screen appears. 2. Use the ▲ and ▼ buttons to select “ V ...
51 AUTO ID This feature automatically sets the ID numbers of multiple displays connected to each other . Example: Setting “ ON ” Set the ID number for the No. 1 display on ID NUMBER menu. Perform Steps 1-2 of VIDEO W ALL, then... 3. Use the ▲ and ▼ buttons to select “ AUTO ID ” . 4. Use the and buttons to select “ ON ” , the ...
52 P . ON DELA Y (Power on delay) Use this function to activate power-on delay . T urn on the AUTO ID before the following operations. Example: Setting “ ON ” Perform Steps 1-2 of VIDEO W ALL, then... 3. Use the ▲ and ▼ buttons to select “ P . ON DELA Y ” . 4. Use the and buttons to select “ ON ” . The mode switches as follo ...
53 REPEA T TIMER Use this to set two timers. Each timer can use the DIVIDER, SOURCE and WORK TIME functions. T urn on the AUT O ID and set the DIVIDER (at 1, 4 or 9) before the following operations. Example: TIMER1...VIDEO1 will be displayed for 3 minutes. TIMER2...RGB1 will be displayed for 6 minutes in a 2 × 2 video wall. Perform Steps 1-2 of VI ...
54 Color System Settings Menu Setting the video signal format Use these operations to set the color systems of composite video signals or Y/C input signals. Example: Setting the color system to “ 3.58 NTSC ” 1. On the MAIN MENU, select “ COLOR SYSTEM ” , then press the MENU/ENTER button. The “ COLOR SYSTEM ” screen appears. 2. T o selec ...
55 External Control Application These specifications cover the communications control of the plasma monitor by external equipment. Connections Connections are made as described below . Connector on the plasma monitor side: EXTERNAL CONTROL connector . Use a crossed (reverse) cable. T ype of connector: D-Sub 9-pin male 1 5 9 6 2 34 7 8 Pin Name No C ...
56 T able of Signals Suppor ted Screen mode Suppor ted resolution • When the screen mode is NORMAL, each signal is converted to a 1024 dots ⳯ 768 lines signal. (Except for * 2, 3, 4 ) • When the screen mode is TRUE, the picture is displayed in the original resolution. • When the screen mode is FULL, each signal is converted to a 1366 dot s ...
PFP™ Contr oller RS-232 Communica tions Baud rate: 9600 (fixed) Bit s: 8 No Parity All protocol in ASCII format RS-232 input connector pin numbers: TxD= Pin# 2 RxD= Pin# 3 GnD= Pin# 5 Command format (single command): command value (i.e. brightness 30). NOTE: A space (not an underscore) or comma may be used between the command and its value. Comma ...
COMMAND P ARAMETER (min/max) V alue stored? DESCRIPTION ON NA NA T urns Controller on OFF NA NA T urns Controller off COMPOSITE NA YES Selects the Composite Video input SVIDEO NA YES Selects the S-V ideo Input COMPONENT NA YES Selects the Component Video input HDCOMPONENT NA YES Selects the HDTV port for Component signals HDRGB NA YES Selects the R ...
COMMAND P ARAMETER (min/max) V alue stored? DESCRIPTION !STORE NA YES S tores the current set of values (all values) into non-volatile memory !RESTORE NA YES Restores the stored values !F ACTOR Y NA YES Restores all values to factory default levels !ST A TUS NA NA Asks the Controller to provide the hardware information, current values and system st ...
60 Remedy • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in humidity . This will not affect performance. • Leave some space between the display and the connected components. • Replace both batteries with new ones. • Set IR REMOTE OFF on OPTION3 menu. • Set an ID number with t ...
61 * 1 Overheat Protector If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn of f the power to the monitor and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a cooler location and wait for the monitor to cool f ...
PFP™ Contr oller T r oubleshooting The following is a basic troubleshooting guide that can assist you in resolving typical problems may result in normal operation. If you have encountered problems that are not listed in this guide, please contact your Runco dealer for assistance. The Plasma does not turn on af ter initial inst allation. The Power ...
The image appears too bright, and there is a loss of definition in the bright- est areas of the image. The image appears too 'washed out', or the dark- est areas of the image appear too bright. The colors of the image appear abnormal The Plasma will not turn on, and the power LED on the front of the Controller is blinking red or green. · ...
6 4 Plasma Monitor Specifications & Dimensions The features and specifications may be subject to change without notice. * 1 HD/DVD/DTV input signals supported on this system 480P (60 Hz) 480I (60 Hz) 525P (60 Hz) 525I (60 Hz) 576P (50 Hz) 576I (50 Hz) 625P (50 Hz) 625I (50 Hz) 720P (60 Hz) 1035I (60 Hz) 1080I (50 Hz) 1080I (60 Hz) * 2 The 5-BNC ...
6 5 PFP TM Controller Specifications & Dimensions Aspect Ratios: Anamorphic, Letterbox, 4:3 (on either 16:9 or 4:3 screens) Input Standards: NTSC, PAL Outputs: Native Resolution: 768p; HD Pass-Through: Up to 1080P Inputs: (1) Composite, (1) S-Video, (1) Component, (1) Pass-through C ...
RUMA-006830-SPL 1 1-03 Runco International . 2900 Faber S treet . Union City , CA 94587 . ph (510) 324-7777 . fax (510) 324-9300 . www .runco.com ...
Runco PL-61CXのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- PL-61CXの取扱説明書
- Runcoの製品カード
- パンフレット
- またはRunco PL-61CXの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Runco PL-61CXの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Runco PL-61CXの取り付け説明書、サービスマニュアル、簡易説明書、またはRunco PL-61CXのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Runco PL-61CXの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Runco PL-61CXデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRunco PL-61CXを使用するのを助ける技術的文書のことです。説明書は通常、全てのRunco PL-61CXユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Runcoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Runco PL-61CXの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRunco PL-61CXの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Runco PL-61CXに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Runco PL-61CXデバイスの基本機能を使うにあたってのヒント。 Runco PL-61CXのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Runco PL-61CXに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRunco PL-61CXのメーカー/サービスへの連絡先に関する情報。
Runco PL-61CXについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもRunco PL-61CXの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRunco PL-61CXで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。