Humax L3040の取扱説明書

65ページ 6.34 mb
ダウンロード

ページに移動 of 65

Summary
  • Humax L3040 - page 1

    HUMAX USA, INC. Please contact us at: 866.Humax.USA (866.486.2987) Humax USA, Inc. 3601 West Garry Ave Santa Ana, CA 92704 www.humaxusa.com L3040 OWNER’S MANUAL ...

  • Humax L3040 - page 2

    2 ...

  • Humax L3040 - page 3

    3 Important Safety Instructions W ARNING : DO NOT EXPOSE THIS DEVICE TO DRIPPING OR SPLASHING, OR PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS DEVICE. This symbol alerts you that important literature concerning operation and maintenance has been included with this device. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CO ...

  • Humax L3040 - page 4

    Important Safety Instructions 4 Important Safeguards for You and Your New Device Always be careful when using your LCD TV. To reduce the risk of fire, electric shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your LCD TV. 1. Read these instructions. 2. Keep these instructions 3. Heed all warni ...

  • Humax L3040 - page 5

    5 Important Safety Instructions 18. If an outside antenna or cable system is connected to the device, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the U.S. National Electrical Code, ANSI/NFPA 70 provides information with regard to proper grounding ...

  • Humax L3040 - page 6

    6 User Instructions Like all phosphor-based display devices and all TFT LCD Displays, LCD TV' s can be susceptible to phosphor burn under certain circumstances. Certain operating conditions, such as the continuous display of a static image over a prolonged period of time, can result in phosphor burn if proper precautions are not taken. To prot ...

  • Humax L3040 - page 7

    7 T able of Contents ST ART -UP ● Part Names and Functions ..............................8~9 ● Checking Parts ..................................................10 ● Battery Installation and Replacement ................10 CONNECTION ● Connecting VHF and UHF Antennas .................11 ● Connecting a Video/S-VHS ........................... ...

  • Humax L3040 - page 8

    FRONT VIEW Part Names and Functions 8 POWER/LED IR Receiver SPEAKER Menu : Displays the On screen Display (OSD). Source : Displays an available video source (i.e. RGB, DVI, Video, S-Video, TV, Component1 and Component2). Also functions as the Select button in the On screen Display (OSD). Volume Up and Down : Volume Up and Down : Adjusts the volume. ...

  • Humax L3040 - page 9

    REAR VIEW 9 Part Names and Functions VHF/UHF For connecting outdoor Antenna RS-232C This terminal is used when control functions need to be operated externally by PC. DVI Input a digital video signal (TMDS/HDCP) from your PC or DTV receiver. RGB(D-sub 15pin) Input an analog RGB signal from your PC. Audio(PC/DTV) Input an audio signal from your PC o ...

  • Humax L3040 - page 10

    Battery Installation and Replacement 10 Checking Parts Insert four AAA batteries. Make sure to insert them with the proper polarity. Press and open the cover. 1 Align the batteries according to the (+) and (-) as indicated inside the case. 2 Close the cover. 3 Checking parts User’s Manual Remote Control Batteries(AAA) Power Cord Warranty Card ...

  • Humax L3040 - page 11

    11 Connection Connecting VHF and UHF Antennas Connecting an Outdoor Antenna For the best reception, we recommend you use an outdoor antenna. Severely weathered antennas and antenna cables can reduce the signal quality. Before making any connections, inspect all antenna hardware; any service center can explain the various outdoor antennas available ...

  • Humax L3040 - page 12

    12 1. Connect video cable(not supplied) to the VIDEO INPUT jack on the LCD TV and the video output jack on the external equipments.(VCR/Cable box, etc.,) 2. Connect audio cables(not supplied) to the AUDIO INPUT(L, R) jack on the LCD TV and the audio output jack on the external equipments.(VCR/Cable box, etc.,) To Play VCR / Cable box : 1. Turn on y ...

  • Humax L3040 - page 13

    13 Connecting a DTV Receiver (Component Video) 1. Connect video cables(not supplied) to the Y, Cb/Pb, Cr/Pr input jacks (Component 1 or 2) on the LCD TV and the video output jacks on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks (Component 1 or 2) on the LCD TV and the output jacks on the digital Set-Top Bo ...

  • Humax L3040 - page 14

    14 Connecting a DTV receiver( DVI ) 1. Connect a DVI cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI with HDCP OUTPUT jack on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jacks on the digital Set-Top Box. To W atch DTV : 1. Turn on the your Digital Set- ...

  • Humax L3040 - page 15

    15 Connecting a PC ( DVI ) 1. Connect a DVI 29pin cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. NOTE : When you connect a DVI, Please note the Analog input is not supported. To watch the PC sc ...

  • Humax L3040 - page 16

    16 1. Connect a PC cable, D-sub 15pin(not supplied) to the ANALOG PC INPUT jack on the LCD TV and RGB output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. To watch the PC screen : 1. Turn on LCD TV and press the SOURCE button to select the RGB. 2. Turn on PC and check f ...

  • Humax L3040 - page 17

    17 Remote Control Buttons POWER : Switches Power ON/OFF. SOURCE : Press this button to select a video source from among Video, S- Video, Component1, Component2, RGB and DVI. MUTE : Mutes the sound. S-SWAP : Exchanges main sound with sub- sound. SELECT : Press this button to select a menu item or to enter the sub-menu. JOYSTICK : Adjust, Move. Use t ...

  • Humax L3040 - page 18

    18 LCD Window Feature LCD window feature Select when you want to control a product other than this LCD TV. Select when you want to know the code for this remote control. Select when you want to set the fixed button. Indicates that the button you pressed is not operating. Indicates that the button pressed is operating. Indicates that the battery is ...

  • Humax L3040 - page 19

    19 Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to control (TV, VCR, DVD, CBL, SAT). Note that you ...

  • Humax L3040 - page 20

    20 Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to control (TV, VCR, DVD, CBL, SAT). Note that you ...

  • Humax L3040 - page 21

    21 Confirming the MBR Code in Y our Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). Using the buttons, move to the CODE icon and press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to confirm (TV, VCR, DVD, CBL, SAT ...

  • Humax L3040 - page 22

    22 PUNCH Buttons How to Set Up the Fixed Buttons - PUNCH Buttons T ypes of PUNCH Button. TV : VOLUME ( ) , MUTE If you select the TV PUNCH, these buttons are operated only on the TV. VCR If you select the VCR PUNCH, these buttons are operated only on the VCR. DVD If you select the DVD PUNCH, these buttons are operated only on the DVD. DEL Cancel th ...

  • Humax L3040 - page 23

    23 How to Reset the Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Press the SEL button. The - - - sign will appear in the product indication window. Input the reset code &q ...

  • Humax L3040 - page 24

    24 Basic operation Connect the Power Cord to the AC input on the back of your LCD TV. Insert the Plug for the LCD TV into a nearby electrical outlet.  The standby indicator lights up on the front panel. Press the POWER ( ) button on the remote control.  The LED lamp will change to light off and your LCD TV will be turned on. To switch your LC ...

  • Humax L3040 - page 25

    25 Basic operation With the OSD, press the INFO button on the remote control.  The LCD TV will display the external source, Picture Mode, Aspect Ratio, Clock and Video type. 1 Displaying Status Information Selecting your Language After adjustment: Press the MENU button to exit. When the LCD TV is initially powered ON, you must select the languag ...

  • Humax L3040 - page 26

    26 Channel Press the MENU button. Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode . Press the or button to select the option ( TV or CATV ). Press the or button to select Auto Program ; then press the SEL ( ) or button.  The LCD TV will begin memorizing all of the available channels. ? ...

  • Humax L3040 - page 27

    27 Channel After adjustment: Press the MENU button to exit. Using the LNA(Low Noise Amplifier) Press the MENU button. Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button. Press the or button to select to the LNA . Press the or button to select On or Off . 1 2 If the LCD TV is operating in a weak-signal area, sometim ...

  • Humax L3040 - page 28

    28 Direct Access Features Using the F A V button to select the previous channel Press the FAV button on the remote control.  The LCD TV will switch to the last viewed channel. 1 1 Press the VOL+ or VOL- button to increase or decrease the Volume on the remote control. Adjusting the V olume 50 Switching the Sound Off T emporarily You can temporari ...

  • Humax L3040 - page 29

    29 Direct Access Features Press the SOURCE button on the remote control. Press the or button to select signal source, then press the SEL ( ) button. 1 2 Selecting a Device from External Sources Source Video Connected TV TV Component2 Move Select Exit Connected Component1 Connected S-Video Not Connected RGB Not Connected DVI Not Connected You can se ...

  • Humax L3040 - page 30

    30 Picture Press the MENU button. Press the or button to select the PICTURE ( ) icon; then press the SEL ( ) or button. Press the or button to select Standard , Dynamic , Mild , or Custom picture setting. 1 2 3 Changing the Picture standard With Picture menu selected, press the or button to select an option ( Contrast , Brightness , Sharpness , Col ...

  • Humax L3040 - page 31

    31 Picture Press the MENU button. Press the or button to select the SOUND ( ) icon; then press the SEL ( ) or button. Press the or button to select Drama , Movie , Music , News , or Custom sound setting. 1 2 3 Changing the Sound Standard With Sound menu selected,press the or button to select an Equalizer ; then press the SEL ( ) or button.  The ...

  • Humax L3040 - page 32

    32 Sound 1 2 3 Setting the BBE Mode 4 Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Middle Mono Off Move Adjust Exit Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Mono Off Move Adjust Exit After adjustment: Press the MENU button to exit. After adjustment: Press ...

  • Humax L3040 - page 33

    33 Sound Selecting the Stereo Sound 1 2 3 4 Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Stereo Off Move Adjust Exit Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Mono Off Move Adjust Exit After adjustment: Press the MENU button to exit. Press the MENU butt ...

  • Humax L3040 - page 34

    34 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. With Aspect Ratio selected, press the or button to select the screen size you want. 1 2 3 Changing the Screen Size After adjustment: Press the MENU button to exit. Quick Way Press the ASPECT button on the remote control. Zoom2 Normal ...

  • Humax L3040 - page 35

    35 Setup 1 2 3 Protecting Screen burn(Long Life) 4 5 Displaying a still image on the LCD TV for more than several minutes can cause screen image retention. This image retention is also known as “screen burn”. The Long Life function reduces such image retention. Press the MENU button. Press the or button to select the Setup ( ) icon; then press ...

  • Humax L3040 - page 36

    36 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) button. Press the or button to select Time ; then press the SEL ( ) or button. With Clock selected, press the button to move to the AM/PM, hour or minute; then Press the or button to adjust item. Press the MENU button to set the setting. Press t ...

  • Humax L3040 - page 37

    37 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Sleep Timer. Press the or button to select the preset time interval for the LCD TV to stay on. The interval ranges from 5 to 120 minutes. 1 2 3 Setting the Sleep Timer 4 OK Setup Aspect Ratio Wide Long L ...

  • Humax L3040 - page 38

    38 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Reset . Press the or button to select OK or Cancel . 1 2 3 Factory Reset 4 Setup Aspect Ratio Wide Long Life Sleep Timer Pro. 120Min. Caption CCD1 V-CHIP Pro. Time Pro. Reset Cancel Move Select Exit Setu ...

  • Humax L3040 - page 39

    39 PIP(Picture In Picture) Press the MENU button. Press the or button to select the PIP ( ) icon; then press the SEL ( ) button. Press the or button to select On .  When the PIP is on, the Sub-menu is activated. Press the or button to select Type . Select a Type ( Small , Double1 , Double2 , or Large ) of the sub picture by pressing the or butto ...

  • Humax L3040 - page 40

    40 PIP(Picture In Picture) Main Picture TV CVBS DVD/480i DVD/480p DTV/480i DVD/480i DVD/480p DTV/480i RGB DVI TV CVBS DVD/ 480i DVD/ 480p DTV/ 480i DTV/480p, 720p, 1080i DVD/ 480i DVD/ 480p DTV/ 480i DTV/480p, 720p, 1080i RGB DVI Sub-Picture COMP 1 COMP 2 DTV/480p, 720p, 1080i DTV/480p, 720p, 1080i ■ Table1. Operating conditions of PIP COMP2 COMP ...

  • Humax L3040 - page 41

    41 OSD Press the MENU button. Press the or button to select the OSD ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Turn off Time . Press the or button to set up the time length of OSD display.  you can adjust time length from 3 to 59 seconds. 1 2 3 Setting the OSD Time Out 4 After adjustment: Press the MENU button to ...

  • Humax L3040 - page 42

    42 V -CHIP Operation The V-CHIP is a microprocessor control circuit that recognizes TV and Motion Picture Ratings. These ratings are contained in a special electronic identification signal that is part of many television programs and recorded videotapes. An on screen menu allows parents to set a secret 4-digit personalized key combination Password. ...

  • Humax L3040 - page 43

    43 V -CHIP Operation Press the MENU button. Press the or button, to select the Setup ( ) icon; then press the SEL ( ) or button. Use the or button to select V-CHIP. Press SEL ( ) or button. SETUP MENU V-CHIP MENU Enter the passwords you have chosen. For initial set-up, use the factory. As soon as you press the password, the BLOCKING menu appears on ...

  • Humax L3040 - page 44

    44 Press the or button to select the ratings which you wish to block. If you wish to select the MPAA menu, press the button. To change the selected rating, press the or button. (UNBLOCK BLOCK) RATING REMARKS G(general audience) All ages admitted. PG(Parental guidance suggested) Some material may not be suited for children. PG13(Parents strongly cau ...

  • Humax L3040 - page 45

    45 V -CHIP Operation This procedure allows parents to block programs that contains TV Parental Guide Ratings they consider inappropriate. Content labels are designed to indicate specific contents of TV programs within each TV Parental Guide Rating. For example, if a program rated TV-Y7 has strong Fantasy Violence content, the program will be labele ...

  • Humax L3040 - page 46

    46 TV-Y (All children) This rating is designed to be appropriate for all children. Whether animated or live action, the themes and elements in this program are specifically designed for a very young audience, including from 2~6. All content labels are blocked TV-Y7 (FV : Directed to older children) This program is designed for children age 7 and ab ...

  • Humax L3040 - page 47

    47 V -CHIP Operation TV-14 (D/L/S/V : Parental caution recommended) This rating contains some material that many parents would find unsuitable for children under 14 years of age. Parents are strongly urged to exercise great care in monitoring these programs, and are cautioned against letting children under the age of 14 watch unattended. TV-14 rate ...

  • Humax L3040 - page 48

    48 Display Settings How to Set Up Your Display Setting (for Windows) The Windows display settings for a typical computer are shown below. The actual screens on your PC, however, will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same basic ...

  • Humax L3040 - page 49

    49 Display Settings The LCD TV might operate abnormally if a non-standard video format is selected. The best resolution for this LCD TV is 1024X768 60Hz. This LCD TV provides plug and play capability. Dot x Line Vertical Horizontal DDC Protocol Frequency(Hz) Frequency(KHz) Support 640 X 350 70.086 31.469 EGA 85.080 37.861 640 X 400 85.080 37.861 72 ...

  • Humax L3040 - page 50

    50 Picture Color Adjustment Press the MENU button. Press the or button to select the Picture ( ) icon; then press the SEL ( ) or button. Press the or button to select Custom Mode. Press the or button to select the item you wish to change. Press the or button to adjust the color. 1 2 3 Adjusting RGB Color 4 5 After adjustment: Press the MENU button ...

  • Humax L3040 - page 51

    51 Picture Position Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the SEL ( ) or button to select Position ; then press the or buttons to adjust the position of the screen. 1 2 3 Changing the image position Frequency Adjustment Press the MENU button. Press the or button t ...

  • Humax L3040 - page 52

    52 Phase Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Phase . Press the or button to remove picture noise on the screen. 1 2 3 Adjusting Phase 4 Automatic Quality Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; ...

  • Humax L3040 - page 53

    53 Serial Control Using RS-232C Serial Control Using RS-232C Cable (optional) Use RS-232C cable when you control the LCD TV using the PC. This function is called PC Remote Control and is the same as the physical Remote control. It will provide you an additional convenience when you use the LCD TV connected with a PC. (The RS-232C cable is not inclu ...

  • Humax L3040 - page 54

    54 Serial Control Using RS-232C Using the Hyper terminal At the connected Hyperterminal Window: File  Preference  Setup  ASCII Setup dialog window 1. Check the two items in the ASCII Sending section. 2. Check the first and third items in the ASCII receiving section. You have completed the preparations to communicate with the LCD TV using y ...

  • Humax L3040 - page 55

    55 Mode Command Remark Power pwr=0 power off pwr=1 power on Source inp=rf inp=vid inp=svd inp-rgb inp=yuv inp=vga inp=dvi Volume vol=12 Contrast con(rf)=24 Brightness bri(vid)+16 Range 0~31 Color col(vga)-10 Tint tin(rf)=? IR Spoofing sir=vup vup=volume up button sir=vdn vdn=volume down button sir=mnu mnu=menu button sir=aup aup=arrow up button sir ...

  • Humax L3040 - page 56

    56 T roubleshooting • Before you call a service technician, please review this list of problems and possible solutions. It may save you time and money. Problems Possible Solution No Power Make sure the power cord is connected to the AC outlet. Make sure the power cord is connected to a wall socket correctly. Poor or no picture Check all wire conn ...

  • Humax L3040 - page 57

    57 Specifications Design and specifications are subject to change without notice. Model Name L3040 Panel Size 30.0 inch Diagonal Display Size 29.53" (Diagonal) Type a-si TFT active matrix Pixel pitch 0.5025mm 0.1675mm RGB Viewing Angle 85 (H) / 85 (V) Frequency Horizontal 30 ~ 61 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M colors Display Reso ...

  • Humax L3040 - page 58

    58 MANUFACTURER CODE ANAM 000 001 002 003 004 005 CROWN 076 DAEWOO 110 113 097 056 112 114 117 102 074 107 076 084 053 062 063 FUTURETECH 076 GE 057 058 073 106 LG(GOLDSTAR) 106 104 118 103 100 101 109 HITACHI 060 059 053 085 INKEL 115 JCP 051 058 JVC 075 089 KEC 076 KENWOOD 093 MARANTZ 051 MITSUBISHI 051 053 071 106 NEC 051 053 056 062 065 106 NIK ...

  • Humax L3040 - page 59

    59 MANUFACTURER CODE ANAM 000 001 002 003 004 005 AIWA 066 071 CANNON 060 063 065 DAEWOO 109 114 116 122 082 083 043 040 038 118 093 126 115 EMERSON 039 050 057 059 061 066 067 068 069 073 103 GE 063 065 LG(GOLDSTAR) 103 112 045 046 053 091 092 096 124 097 100 108 120 HITACHI 037 046 051 053 058 066 098 102 JVC 063 065 127 074 KENWOOD 047 MARANTZ 0 ...

  • Humax L3040 - page 60

    MANUFACTURER CODE ANAM 000 001 002 APEN 015 025 HARMAN/KARDON 009 JVC 008 KENWOOD 023 LG 005 MEGAVOX 024 MITSUBISHI 019 ONKYO 024 PANASONIC 013 PIONEER 021 014 026 PROSCAN 020 RCA 020 SAMSUNG 004 017 SHERWOOD 016 004 SONY 022 TECHNICS 013 TOSHIBA 024 ZENITH 024 010 DVD MANUFACTURER CODE NOW 042 DONGGUK 040 SAEWOO 041 WOOYOUNGTECH 044 PACIFIC 039 LG ...

  • Humax L3040 - page 61

    61 How to Set Up the Lockout Function Function Remote Key Combination Lock/ Front Key lock on HELP +1 + 0 + 3 Unlock Front Key lock off HELP +1 + 0 + 2 Function Remote Key Combination Power Power on HELP +1 + 0 + 0 On/Off Power off HELP +1 + 0 + 1 Function Remote Key Combination Source TV HELP +2 + 0 + 0 On/Off Video HELP +2 + 0 + 1 S - Video HELP ...

  • Humax L3040 - page 62

    62 APPENDIX Care and Maintenance • With proper care, your LCD TV will give you many years of service. Please follow these guidelines to get the maximum performance from your LCD TV. Identifying Problems • Do not put the LCD TV near extremely hot, cold, humid, or dusty places. • Do not put the LCD TV near appliances that create magnetic fields ...

  • Humax L3040 - page 63

    63 Memo ...

  • Humax L3040 - page 64

    Memo 64 ...

  • Humax L3040 - page 65

    KQF1T422Z3 ...

メーカー Humax カテゴリー Flat Panel Television

Humax L3040のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- L3040の取扱説明書
- Humaxの製品カード
- パンフレット
- またはHumax L3040の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Humax L3040の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Humax L3040の取り付け説明書、サービスマニュアル、簡易説明書、またはHumax L3040のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Humax L3040の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Humax L3040デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHumax L3040を使用するのを助ける技術的文書のことです。説明書は通常、全てのHumax L3040ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Humaxの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Humax L3040の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHumax L3040の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Humax L3040に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Humax L3040デバイスの基本機能を使うにあたってのヒント。 Humax L3040のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Humax L3040に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHumax L3040のメーカー/サービスへの連絡先に関する情報。

Humax L3040についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHumax L3040の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHumax L3040で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)