-
La Crosse Technology WT-5360U - page 1
WT-5360U 433 MHz Radio Controlled Alarm Clock With Projection Time Instruction Manual ...
-
La Crosse Technology WT-5360U - page 2
2 TABL E OF CONT ENTS Topic Page Inventory of Contents/ Additional Equipment 3 Glossary of Common Terms 3 QUICK SET-UP GUIDE 4 DETAILED SET-UP GUIDE Battery Installation 5 PROG RAM MO DE Programming Sequence 6 Function Buttons 6 Time Zone Setting 6-7 Manual Time Setting 7 Year and Date Setting 7 12/24-Hour Clock Setting 8 Indoor Temperature Setting ...
-
La Crosse Technology WT-5360U - page 3
3 INVENTORY OF CONTENTS 1. WT-5360 Alarm Clock 2. AC adapter/transformer 3. Instruction manual and warranty card. ADDITION AL EQUIPMENT (not included) Two fresh 1.5V AA alkaline batteries (optional when using AC adapter) FEATURES OF PROJECTION ALARM CLOCK Operation of these fea tures is in section III. 1. Time Zone Setting 2. Manual Time Display 3. ...
-
La Crosse Technology WT-5360U - page 4
4 I. QUICK SET-UP GUID E Hint: Use good quality alkaline batter ies and avoid rechargea ble batteries. 1. We recommend beginning the set-up procedure at night whe n the WWVB signal is easiest to receive. 2. It is also highly recommended to set the projection al arm in a window or other area free of interference in the area of your home that is clos ...
-
La Crosse Technology WT-5360U - page 5
5 II. DETAILED SET-UP GUIDE A. BATTERY INSTALLATION 1. Remove the battery cover on the backside of the projection alarm. 2. Observe the correct polarity, and install 2 AA batteries. 3. In addition to or instead of installing batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath side of the alarm clock, ...
-
La Crosse Technology WT-5360U - page 6
6 III. PROG RAM MO DE To enter the Program Mode, hold down the “MODE/MIN” button for 3 seconds, until the time zone flashes at the bottom of the display. The Program Mode Guide is laid out in a manne r that allows you to program each function separately, or you can follow the instructions entirely to progra m the projection alarm. Complete prog ...
-
La Crosse Technology WT-5360U - page 7
7 4. NOTE: The U.S. time zones will show abbr eviations as opposed to the numerical time zone indicator. For example Eastern Time will display “ET” when the Eastern Time Zone is selected 5. Press and release the “SNOOZE” bar to confirm the time zone setting and advance t o the Manual Time Setting. D. MANUAL TIME SETTING 1. Hold down the “ ...
-
La Crosse Technology WT-5360U - page 8
8 F. 12/24-HOUR CLOCK SETTIN G 1. Hold down the “MODE/MIN” button for 3 seconds; the time zone will appear flashing at the bottom of the LCD. 2. Press and release the “SNOOZE” bar 5 times to ad vance to the 12/24-hour clock setting. 3. Press and release the “MODE/MIN” button to select either a 12-hour clock or a 24- hour clock. 4. Press ...
-
La Crosse Technology WT-5360U - page 9
9 3. When the time signal has been received successfully, the tower icon will remain steady until midnight. 4. The projection alarm will search for a si gnal every night when reception is best. 5. It is possible that your projection alarm may not be exactly on the se cond due to the variance in the quartz. However, the clock w ill adjust the quartz ...
-
La Crosse Technology WT-5360U - page 10
10 c. To disable the alarm for 24 hours, press and release an y button other than the “SNOOZE” bar or display direction buttons. NOTE: The alarm will sound in a 3-step crescendo for 80 seconds if the “SNOOZE” bar is not pressed. 4. VIEWING TIME ALARM a. To momentarily view the time the alarm is set for, press and hold down the “SNOOZE” ...
-
La Crosse Technology WT-5360U - page 11
11 2) Wait overnight for signal. 3) Be sure the projection alarm is at least 6 feet from any electrical devices, i.e. TV sets, computers, or other radio controlled clocks. 4) Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing buttons. 5) If problems persist contact La Crosse Technology. Problem: Hour is ...
-
La Crosse Technology WT-5360U - page 12
12 authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers a ll defects in material and workmanship with the following specified exceptions: (1) damage c aused b y accident, unreasonable use or neglect (including th ...
-
La Crosse Technology WT-5360U - page 13
13 FCC DISCLAIMER This device complies with part 15 of the FCC rules. Operation is subject to the follo wing two conditions: (1) this device may not cause harmful interference, an d (2 ) this device must accept any interference received, including interfer ence that may cause undesired operation. La Crosse Technology Made in China WT-5360 FCC ID: O ...
La Crosse Technology WT-5360Uについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもLa Crosse Technology WT-5360Uの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがLa Crosse Technology WT-5360Uで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。