Cisco Systems NI-1の取扱説明書

28ページ 0.31 mb
ダウンロード

ページに移動 of 28

Summary
  • Cisco Systems NI-1 - page 1

    C HAPTER 6-1 Cisco Provis ioning Cent er User’s Guid e 78-11339-01 6 Configuring the Cisco NI-1 DLSAM Equipment Module The Cisco 6100/6130 NI-1 DSLAM Equ ipment Module supports provisioning of cross connections on Cisco 6100/6130 NI-1 DSL access co ncentrators. The Cisco 6100/ 6130 DSL access multiple xer (DSLAM) is an A TM cell switch that multi ...

  • Cisco Systems NI-1 - page 2

    6-2 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Supported Equipment • Subtended N etwork Configuration. Allo ws up to se ven Cisco 6100/6130 chassis t o be linked to a sin gle W AN trunk. Subtend ing is supported in b oth Direct Connec t and DOH configuratio ns. Supported Equip ...

  • Cisco Systems NI-1 - page 3

    6-3 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Summary of Configuration Tasks Note In order to conf igure the NI-1 DLSA M Equipment Module you must ha ve installed it during the CPC Serv er and Client inst allation procedures. F or more information about installing CPC, refer to ...

  • Cisco Systems NI-1 - page 4

    6-4 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Step 4 Run the follo wing commands in succession to source the Server en vironment and start the CPC Server: cd /opt/SY/Activator/Server/mng/utility . syccpovdef SYnpt -sS Initial System Upload In order to prov ...

  • Cisco Systems NI-1 - page 5

    6-5 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Before You Upload: Creating a Network Object One network object must be crea ted for each network. The follo win g steps explain ho w to create a network object. Step 1 From the Root T ree V iewer choose Netw o ...

  • Cisco Systems NI-1 - page 6

    6-6 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Creating a Node Object Y ou should create node objects for all Cisco 6100/6130 nodes in t he network. The foll ow ing steps explain ho w to create a node object. Step 1 From the Root Tree V ie wer choose Networ ...

  • Cisco Systems NI-1 - page 7

    6-7 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload T ransit Cost This is the cost of crossing the sub-network. Thi s attrib ute is used by the Threader to determine the lo west cost path when threading a service. (Mandatory) 0-2147483647 100 0 Node T ype This s ...

  • Cisco Systems NI-1 - page 8

    6-8 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Network Upload Uploading the Fabric and Servi ce Elements for a Network Object Y ou can upload the fabric and Service elements for a network object b y completing the follo wing steps: Step 1 From the Root T re ...

  • Cisco Systems NI-1 - page 9

    6-9 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Uploading the Fabric Elem ents for a Network Object Gi ven that the network obj ect is in place, you can no w upload fabric. Uploading net work fab ric creates the node objects corresp onding to the specif ied ...

  • Cisco Systems NI-1 - page 10

    6-10 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Re-Upload Uploading the Fabric Elements for a Node Object After you create a node object, you may want to upload just the f abric elements for that node. Complete the following steps to upl oad th e fabric elements for a node: Step ...

  • Cisco Systems NI-1 - page 11

    6-11 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Logical Ports T o re-upload y ou need to upload the f abric and Serv ice elements for t hat node. For more information, refer to the sections “Up loading the Fabric and Serv ice Elements for a Node Ob ject” and “ ...

  • Cisco Systems NI-1 - page 12

    6-12 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Naming Logical Ports Deleting Logical Ports Deleting an A TM logical port will d elete an agent subscr iber from the Cisco 610 0/6130. Step 1 From the Root T ree V iewer choose Netwo rk > Cisco NI1 DSLAM Network Name > Cisco ...

  • Cisco Systems NI-1 - page 13

    6-13 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Working with Service Element Profiles Service element prof iles provide you with access to th e Cisco-specif ic attributes for a particular Serv ice element. There is a corresponding Service ...

  • Cisco Systems NI-1 - page 14

    6-14 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Step 4 Sav e and apply the pr ofile ob ject by cli cking the Sa ve an d A pply butto ns on the toolbar . Modifying a Service Element Profile T o modify a Service element profile, comp lete the ...

  • Cisco Systems NI-1 - page 15

    6-15 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Figure 6-1 Cisco 61 0 0/6130 DSL Phys ical P ort Pr ofile Object V iewer ...

  • Cisco Systems NI-1 - page 16

    6-16 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles T able 6-4 lists the configurabl e attribut es for a Cisco 6100/ 6130 DSL physical p ort prof ile. Attrib utes with an asterisk "*" ne xt to their Default V alue indicates that these ...

  • Cisco Systems NI-1 - page 17

    6-17 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Cisco 6100/6130 Modem Card Ty p e The modem card type (line card type) that contai ns this physical port CAP ADSL, DMT2ADSL, 2B1QSDSL CAP ADSL Modem Card Subtype The modem card subtype. This ...

  • Cisco Systems NI-1 - page 18

    6-18 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles T raining Mode The training mode for the ph ysical port. In standard mode, the modem attempts to train us ing the method specifi ed by T1.413 Issue 2. FastT rain mode is a proprietary , optimiz ...

  • Cisco Systems NI-1 - page 19

    6-19 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles A TU-C CAP CPE Signature This attribut e specif ies a CPE software signature (w hich corresponds to a speci fic v e rsion). If the Allow CPE’ s Signature Detection attrib ute is Enabled, th ...

  • Cisco Systems NI-1 - page 20

    6-20 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Reed Solomon Reed Solomo n erro r encoding can be config ured for the A TU-C running in CAP mode. Shor t interleav e , sets the interlea ve depth to a smaller v alue and Long interleav e sets i ...

  • Cisco Systems NI-1 - page 21

    6-21 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles ATM Logical Port Profile Attributes The A TM logical port prof ile provides you with acce ss to the A TM attributes that you can configure for an A TM logical port. If you do not create logi ...

  • Cisco Systems NI-1 - page 22

    6-22 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Figure 6-2 Cisco 61 0 0/6130 A TM Logi cal P or t Pr ofile Object V i ewer T able 6-5 lists the configurabl e attrib utes for a Cisco 6100/ 6130 A TM logical port prof ile. Attrib utes marked w ...

  • Cisco Systems NI-1 - page 23

    6-23 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Administrati ve Status Specify the administrativ e status of the logical port. Unlocked, Locked Unlocked Maximum Connections Specify the maximum number of connections supported for the logi c ...

  • Cisco Systems NI-1 - page 24

    6-24 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Multiple Ranges Specify whether or not to enable or disable mult iple ranges. TR UE, F ALSE F ALSE EMS Name The name of the logical port used in the Element Management System. T ext string (up ...

  • Cisco Systems NI-1 - page 25

    6-25 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles ATM-ATM Cross Connection Service Element Profile Attributes The A TM-A TM Cross Connection Service element prof ile provides you with access to the additional attrib utes that you can conf ig ...

  • Cisco Systems NI-1 - page 26

    6-26 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Figure 6-3 C isco 61 00/61 30 A TM-A TM Cr os s Connection Profi le Object View er ...

  • Cisco Systems NI-1 - page 27

    6-27 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles T able 6-6 lists the configurabl e attribut es for a Cisco 6100/613 0 A TM-A T M cross connections. Attrib utes marked with an asterisk "*" ne xt to their Defaul t V alue indicates ...

  • Cisco Systems NI-1 - page 28

    6-28 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles A to Z, Z to A Directions Bandwidth (kbits/ s) The bandwidth for the cr oss connection. 0-214783647 0 Primary Logical Port The origin al logical port that is being backed up b y the he UNI resi ...

メーカー Cisco Systems カテゴリー Network Cables

Cisco Systems NI-1のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- NI-1の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems NI-1の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems NI-1の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems NI-1の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems NI-1のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems NI-1の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems NI-1デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems NI-1を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems NI-1ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems NI-1の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems NI-1の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems NI-1に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems NI-1デバイスの基本機能を使うにあたってのヒント。 Cisco Systems NI-1のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems NI-1に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems NI-1のメーカー/サービスへの連絡先に関する情報。

Cisco Systems NI-1についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems NI-1の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems NI-1で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)