ページに移動 of 286
A vaya Integrated Management 3.0 C360 Manager User Guide 14 - 300164 Issue 2 June 2005 ...
Copyright 2005, A vaya Inc. All Rights Reserved Notice Every effort was made to ensure that the in formation in this docum ent was complete and accurate at the time of printing. However , information is subject to change. Warranty A vaya Inc. provides a limited w arranty on this pr oduct. Re fer to your sales agreement to establish the terms of the ...
Electro magnetic Compatibility (EMC) Standard s This product complies with and confo rms to the following internati o nal EMC standard s and all rele va nt national deviations: Limits and Methods of Measurem ent of Radio Interference of Information T echnology Equipment, CISPR 22:1 997, EN55022:1998, and AS/NZS 3548. Information T echnology Equipme ...
A plug and ja ck used to c onnect this equi pment to the premises wi ring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACT A. A compliant telephone cord and modular plug is prov id ed with thi s product. It is des igned to be connected to a compatib le modular jack that is also co m pliant. ...
Avaya C360 Manager User Guide v T able of Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi The Purpose of This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Who Should Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Orga ...
vi Avaya C360 Manager User Guide Table of Contents Viewing LAG Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 LAG Configuration - General Tab . . . . . . . . . . . . . . . . . . . . . . .32 LAG Configuration - Advanced Tab . . . . . . . . . . . . . . . . . . . . .35 Viewing Port Configuration . . . . . . . . . . . . . ...
Avaya C360 Manager User Guide vii Table of Contents Chapter 8 — Port RMON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Displaying the Port RMON Window . . . . . . . . . . . . . . . . . . . . . . .132 The Pie Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132 The Traffic Graph . . . . . ...
viii Avaya C360 Manager User Guide Table of Contents Primary Port Selection Screen . . . . . . . . . . . . . . . . . . . . . . . . .165 Secondary Port Selection Screen . . . . . . . . . . . . . . . . . . . . . . .166 Name and Type Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Confirmation Screen . . . . . . . . . . . . . . . ...
Avaya C360 Manager User Guide ix Table of Contents Chapter 17 — Routing Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Router Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 Layer 2 Switch ...
x Avaya C360 Manager User Guide Table of Contents CRTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253 CRTP Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253 Appendix A — Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 Device M ...
Avaya C360 Manager User Guide xi Pr eface W elcome to A vaya C360 Manager . This chapter provides an introduction to the structure and assumptions of this guide. It includes the following sections: • The Purpose of This Guide - A description of the goals of this guide. • Who Should Use This Guide - T he intended audience of this guide. • Orga ...
Preface xii Avaya C360 Manager User Guide • A vaya C360 Device Manager - Information pertaining to A vaya C360 Device mana gement. — Device Manager - An introduction to the A vaya C360 Device Manager including a descript ion of the user interface. — Device Configuration - Viewing and modifying the different device configurations. — Power Ov ...
Avaya C360 Manager User Guide xiii Preface • A vaya C360 Routing Manager - Information pertaining to A vaya C360 routing management. — Routing Manager - An introduction to configuring routing with A vaya P330ML and A vaya C360 modules, and a description of the A vaya C360 Ro uting Manager user interface. — Device - Detailed descriptions of ro ...
Preface xiv Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 1 1 Intr oduction This chapter provid es an introduction to the A vaya C360 Manager . It includes the following sections: • A vaya C360 Manager Overview - An overview explaining the different aspects of A v ay a C360 Device management. • Starting the A v aya C360 Manager - Instructions on how to access A vaya C360 ...
Chapte r 1 2 Avaya C360 Manager User Guide Starting the A vaya C360 Manager This section provides instructions for starting A vaya C360 Manager . A vaya C360 Manager as Part of A vaya Integrated Management If you installed the A vaya C360 Manager as part of A vaya Integrated Management, the following sections provide instructions for starting A vay ...
Avaya C360 Manager User Guide 3 Introduction A vaya C360 Manager via W e b Management T o start A vaya C360 W eb Management: 1. Point your web browser to http:// xxx.xxx.xxx .xxx , where xxx.xxx.xxx.xxx is the IP address of the A vaya C360 Device you want to manage. The Network Password dialog box op ens. Figure 1-1. Network Password Dialog Box 2. ...
Chapte r 1 4 Avaya C360 Manager User Guide The User Interface The A vaya C360 Manager user interface is different f or each of its management applications. However , th e following elements of the user interface are common to a ll views: • Application T abs - T abs for acces sing the Device Manager , Routing Manager , and SMON applications for th ...
Avaya C360 Manager User Guide 5 Introduction * Note: When the A vaya C360 Manager is installed as a standalone manager and when running the A vaya C360 Manager via W eb Management, the Device SMON and AnyLayer SMON tabs do not appear . Status Line The Status Line shows the communicati on status between the applica tion and the A vaya C360 Device. T ...
Chapte r 1 6 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 7 2 Device Manager This chapter provid es an introduction to the A vaya C360 Device Manager . It includes the following sections: • The User Interface - An introduction to the A vaya C360 Device Manager user interface, including instructions for selecting elements and using the toolbar buttons. • A vaya C360 Device ...
Chapte r 2 8 Avaya C360 Manager User Guide • Chassis V iew - A graphical representation of the A vaya C360 Device. • Dialog Area - A resizeable window where all di alog boxes and tables first open. For information on other parts of the user interface, refer to “ The User Interface ” on page 4 . The figure below shows the user interf ace, wi ...
Avaya C360 Manager User Guide 9 Device Manager When you place the cursor on a toolbar icon for one second, a label appears with the name of the button. Y ou can toggle the display of the app lication toolbar . T o toggle the display of the application toolbar , select View > Toolbars > Show Application Toolba r . Displays addresses of devices ...
Chapte r 2 10 Avaya C360 Manager User Guide Get/Set T oolbar The Get/Set T oolbar provides buttons for getting and setting configuration parameters for selected ports and LAGs . When a port or LAG is selected, its configuration is reflected on the Ge t/Set T oolbar . Each group of buttons represents the various possible states of a configuration pa ...
Avaya C360 Manager User Guide 11 Device Manager Y ou can toggle the display of the Get/Se t toolbar . T o toggle the display of the Get/Set toolbar , select View > Toolbars > Show Get/Set Toolbar . T r ee View The T ree View shows a hierarchical re presentation of the structure of the A vaya C360 Device. T o select ports, LAGS, modules or med ...
Chapte r 2 12 Avaya C360 Manager User Guide Chassis View The Chassis V iew is a graphical representation of the A vaya C360 Device. The A vaya C360 Device can contain several A vaya C360 modules. The Chassis V iew shows all of the device’ s modules, LAGs, and ports, including ports on expansion modu les and cascading modules (when present). The c ...
Avaya C360 Manager User Guide 13 Device Manager The following table provides a list of the possible port and LAG colors in the Chassis V iew and their meaning. GBIC Ports Some A vaya C360 expansion modules contain GBIC (GigaBit Interface Converter) ports that house removabl e transceiver modules. The Chassis V iew reflects the management status of ...
Chapte r 2 14 Avaya C360 Manager User Guide GBIC ports that contain unsupported transceiver modules cannot be configured. Selecting Elements Y ou can select modules, LAGs, and ports. T o select a module: In the Chassis V iew , click the module’ s label. Or In the T ree V iew , click the module’ s icon. The module’ s label is highlighted in th ...
Avaya C360 Manager User Guide 15 Device Manager Dialog Ar ea The area to the right of the Chassis View is where all dialog boxes, tables, and wizard s first appear . This area can be resized by dragging the ve rtical splitter bar with the mouse. When a dialog box, table, or wizard opens, it replaces the current dialog box open in the Dialog Area. T ...
Chapte r 2 16 Avaya C360 Manager User Guide Refr eshing Device Information Y ou can refresh the information in the A vaya C360 Device Manager . T o refresh A vaya C360 device information, select View > Refresh . The A vaya C360 Device Manager refreshes its device information and updates the display . Using Dialog Boxes and T ables Dialog boxes a ...
Avaya C360 Manager User Guide 17 Device Manager Using A vaya C360 Device Manager Help This section explains how to use the on-line help in the A vaya C360 Device Manager . The on-line help can be opened to the contents page or directly to a topic of interest. * Note: When running the A vaya C360 Manager via W eb Management, on-line help is only ava ...
Chapte r 2 18 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 19 3 Device Configuration This chapter explains how to view and set the various configuration parameters relevant to the A vaya C360. It includes the following sections: • V iewing Device Information - V iew hig h-level information about the A vaya C360 Device. • V iewing Module Configuration - V iew information sp ...
Chapte r 3 20 Avaya C360 Manager User Guide Viewing Device Information The Device Information dialog box provides you with high-level information specific to the A vaya C360 Device. The General tab of the Device Inform ation dialog box provides detailed information about the device such as the device’ s na me, addresses, contact person, location, ...
Avaya C360 Manager User Guide 21 Device Configuration The following table provides a list of the fields in the Gen eral tab of the Device Information dialog box and their descriptions. For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . Device Information - Advanced T ab T o view the Advanced ta ...
Chapte r 3 22 Avaya C360 Manager User Guide 2. Click Advanced . The Advanced tab of the Device Information dialog box appears. Figure 3-2. Device Information Dialog Box - Advanced T ab The following table provides a list of th e fields in the Advanced tab of the Device Information dialog box and their descriptions. T able 3-2. Device Information Fi ...
Avaya C360 Manager User Guide 23 Device Configuration STP Version The version of Spanning T ree Protocol to use. Possible vers ions include: • Common Spanning T ree 802.1d - The standard spanning tree protocol. • rstp - Rapid spanning tree protocol 802.1w . STP Max Age The maximum age of Spanning T ree Protocol information learned from the netw ...
Chapte r 3 24 Avaya C360 Manager User Guide For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . Viewing Module Configuration The Module Configuration dialog box provides you with informati on specific to a selected module. The General tab of the Module Config uration dialog box provides detailed ...
Avaya C360 Manager User Guide 25 Device Configuration Module Configuration - General T ab T o view the General tab of the Modu le Configuration dialog box for a selected module: Click the module symbol in the T ree V iew . Or Click the module’ s label in the Chassis V iew . The Module Configuration dialog box opens to the General tab. Figure 3-3. ...
Chapte r 3 26 Avaya C360 Manager User Guide Module Type The module type. Possible values include: • MM710 • MM711 • MM712 • MM714 • MM717 • MM720 • MM722 • MM760 • S8300 Module Description A descriptio n of the module type. Number of Ports The number of ports located on the module. Software Version The version of the appli cation ...
Avaya C360 Manager User Guide 27 Device Configuration * Note: Media Modules cannot be inserted into the C360. Rather , they have to be inserted into G700, which is then stacked with the C360. For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . Route Mode The routing mode configured on a C360R mo ...
Chapte r 3 28 Avaya C360 Manager User Guide Module Configuration - Advanced T ab T o view the Advanced tab of the Module Configuration dialog box for a selected module: 1. Click the module symbol in the T ree V iew . Or Click the module’ s label in the Chassis V iew . The Module Configuration dialog box opens to the General tab. 2. Click Advanced ...
Avaya C360 Manager User Guide 29 Device Configuration The following table provides a list of th e fields in the Advanced tab of the Module Configuration dialog box and their descriptions: T able 3-4. Module Config uration Fields - Advanced T ab Field Description BUPS Module Type The type of BUPS (BackUp Power Supply) module in the selected module. ...
Chapte r 3 30 Avaya C360 Manager User Guide For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . LLDP Tx Ho ld Multiplier The LLDP time-to-live value expressed as a multiple of the value configured in the LLDP Tx Interval fie ld. LLDP Tx Delay The delay between successive LLDP frame transmissions ...
Avaya C360 Manager User Guide 31 Device Configuration Viewing LAG Configuration The LAG Configuration dialog box prov ides you with information specific to a selected LAG. The General tab of the LAG Configurat ion dialog box provides detailed information about the LAG, such as the LAG’ s status, name, VLAN tagging mode, VLAN ID, priority level, a ...
Chapte r 3 32 Avaya C360 Manager User Guide LAG Configuration - General T ab T o view the General tab of the LA G Configuration dialog box for a selected LAG: Click the LAG’ s symbol in the T ree View . Or Click the LAG’ s icon in the Chassis V iew . The LAG Configuration dialog box opens to the General tab. Figure 3-5. LAG Configuration Dialog ...
Avaya C360 Manager User Guide 33 Device Configuration Administrative Status The administrative state of the selected LAG: • Enabled - The LAG is enabled and can transmit and receive pack ets. • Disabled - The LAG is disabled and cannot transmit or receive packets. LAG Name The name of the LAG. Tagging Mode The LAG’ s operation mode regarding ...
Chapte r 3 34 Avaya C360 Manager User Guide Auto Negotiation Mode The configured state o f the Auto-Negotiation protocol between two stations. When enabled, Auto-Negotiation detects the highest common denominator for communication between endstations, and sets both to the same highest common setting. It also delivers remote link status. For LAGs wi ...
Avaya C360 Manager User Guide 35 Device Configuration For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . LAG Configuration - Advanced T ab T o view the Advanced tab of the LAG Configuration dialog box f or a selected LAG: 1. Click the LAG’ s symbol in the T ree V iew . Or Click the LAG’ s i ...
Chapte r 3 36 Avaya C360 Manager User Guide 2. Click Advanced . The Advanced tab of the LAG Configuration dialog box appears. Figure 3-6. LAG Configuration Dialog Box - Advanced T ab The following table provides a list of th e fields in the Advanced tab of the LAG Configuration dialog box and their descriptions: T able 3-6. LAG Configuration Fields ...
Avaya C360 Manager User Guide 37 Device Configuration LAG STP Mode Enables LAG Spanning T ree. The Spanning T ree mode creates a logical tree topology out of any arrangement of bridges, resulting in a single path between any two end stations. The Spanning T ree Mode also provides high fault tolerance. The possible states are: • Enable - Enables t ...
Chapte r 3 38 Avaya C360 Manager User Guide STP Admin P2P The administrative point-to-point status of the LAN segment attached to this LAG. Possible statuses include: • Tr u e - The LAG should always be treated as if it is connected to a point-to-point link. • forceFalse - The LAG should be treated as having a shared media connection. • auto ...
Avaya C360 Manager User Guide 39 Device Configuration For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . Viewing Port Configuration The Port Configuration dialog box contains tabs that provide you with information specific to a selected port. The General tab of the Port Configur ation dialog bo ...
Chapte r 3 40 Avaya C360 Manager User Guide * Note: The information fields in the Port Configuration dialog box vary according to the type of port selected. Port Configuration - General T ab T o view the General tab of the Port Co nfiguration dialog box for a selected port: Click the port symbol in the Chassis V iew . Or Click the port’ s icon in ...
Avaya C360 Manager User Guide 41 Device Configuration The following table provides a list of the fields in the Gen eral tab of the Port Configuration dialog box and their descriptions: T able 3-7. Port Confi guration Fields - General T ab Field Description Port Name The user can defi ne a lo gical name to the port for ease of use. Port Type The por ...
Chapte r 3 42 Avaya C360 Manager User Guide Port Priority Level The priority level of packets exiting the port or ports on the module. For effective transmission, multimedia packets must be received isochronously (at regular intervals). T o ensure this, you can assign priorities to packets coming out of a port. Whenever traffic load is extreme and ...
Avaya C360 Manager User Guide 43 Device Configuration Auto Negotiation Status The operational state of the Auto-Negotiation protocol between two stations. Possible statuses are: • Pass - The Auto-Negotiation protocol is enabled and a common protocol has been established. • In progre ss - The Auto-Negotiation protocol is in the process of detect ...
Chapte r 3 44 Avaya C360 Manager User Guide For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . Port Configuration - Advanced T ab T o view the Advanced tab of the Port Configuration dialog box for a selected port: 1. Click the port symbol in the Chassis V iew . Or Click the port’ s icon in th ...
Avaya C360 Manager User Guide 45 Device Configuration The following table provides a list of th e fields in the Advanced tab of the Port Configuration dialog box and their descriptions: T able 3-8. Port Configuration Fields - Advanced T ab Field Description Port STP Mode Enables Port Sp anning T ree. The Spanning T ree mode creates a logical tree t ...
Chapte r 3 46 Avaya C360 Manager User Guide STP Admin P2P The administrative point-to-point status of the LAN segment attached to this port. Possible statuses include: • Tr u e - The port should always be treated as if it is connected to a point-to-point link. • forceFalse - The port should be treated as having a shared media connection. • au ...
Avaya C360 Manager User Guide 47 Device Configuration For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . Port Classification The classification of a specific port. Port Classification allows network managers to specify each port level’ s importance. The possible states are: • Regular - Norm ...
Chapte r 3 48 Avaya C360 Manager User Guide Port Configuration - LLDP T ab Link Layer Discovery Protocol (LLDP) is a neighbor discovery protocol, which allows Ethernet network devi ces to search for , and request information from, other LLDP enable d devices on the network. LLDP defines a standard method for Ethernet network devices, such as switch ...
Avaya C360 Manager User Guide 49 Device Configuration T o view the LLDP tab of the Port Conf iguration dialog box for a selected port: 1. Click the port symbol in the Chassis V iew . Or Click the port’ s icon in the T ree V iew . The Port Configuration dialog box opens to the General tab. 2. Click the LLDP tab. The Port Configurat ion Dialog Box ...
Chapte r 3 50 Avaya C360 Manager User Guide The following table provides a list of the fields in the LLDP tab of the Po rt Configuration dialog box and their descriptions: T able 3-9. Port Configuration Fields - LLDP T ab Field Description LLDP Admin Status The status of LLDP mode on the device. Possible values are: • Tx Only - LLDP mode is enabl ...
Avaya C360 Manager User Guide 51 Device Configuration Resetting the Device Y ou can reset the entire A vaya C360 Device, or one or more of its individual modules. T o reset the entire A vaya C360 Device: 1. Select Action > Reset Device . A confirmation dialog box opens. 2. Click Yes . The device resets. T o reset an individual A vaya C360 module ...
Chapte r 3 52 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 53 4 Power over Ether net This chapter provides information ab out Power over Ethernet (PoE) and includes the following sections: • PoE Overv iew - An overview of P ower over Ethernet functionality in A vaya C360 devi ces. • V iewing PoE Information - Information about viewing PoE port information and configuring P ...
Chapte r 4 54 Avaya C360 Manager User Guide Viewing PoE Information This section provides information about viewing port information and configuring PoE on the port and module level, and includes the following: • V iewing PoE Port Information • V iewing PoE Configuration Viewing PoE Port Information The Chassis V iew provides immediate informat ...
Avaya C360 Manager User Guide 55 Power over Ethernet PoE Module Configuration T o view the PoE configuration on a module that supports PoE, select the Power tab in the module’ s configuration dialog box. For information on opening the Module Configuration dialog box, refer to “ Vie w i n g Module Configuration ” on page 24 . Figure 4-1. Modul ...
Chapte r 4 56 Avaya C360 Manager User Guide PoE Port Configuration T o view the PoE configuration on a port that supports PoE, select the Power tab in the port’ s configuration dialog box. For more information on opening the Port Configuration dialog box, refer to “ Vie w i n g Port Configuration ” on page 39 . Figure 4-2. Port Configuration ...
Avaya C360 Manager User Guide 57 Power over Ethernet Detection Status The operational state of power on this port. Possible states include: • Searching - Port is currently being polled. • Delivering Power - This port is supplying power to an IP telephone. • Failed - This port is current ly not supplying power to an IP telephone. Power Priorit ...
Chapte r 4 58 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 59 5 G700 Media Gateway This chapter pro vides information about the A vaya G700 Media Gateway and includes the following sections: • G700 Media Gateway Overview - An o verview of G700 functionality in A vaya C360 Devices. • G700 Configuration - Informatio n about viewing and configuring G700 components. • A v ay ...
Chapte r 5 60 Avaya C360 Manager User Guide G700 Configuration This section describes how to view and set the various configuration parameters relevant to the G700 Media Gateway . It includes the following sections: • Vi e w i n g Module Configuration - View information specific to a G700 Media Gateway module in the device. • Vi e w i n g Media ...
Avaya C360 Manager User Guide 61 G700 Media Gateway MG Config The MG Config tab provides info rmation about the Media Gateway’ s hardware configuration and operational status. Figure 5-1. MG Config T ab The following table lists the fields in the MG Config tab of th e Module Configuration dialog box and their descriptions. T able 5-1. MG Config P ...
Chapte r 5 62 Avaya C360 Manager User Guide MGP Config The MGP Config tab provides hard ware information about the Media Gateway Processor . In addition, the MGP Config tab is used to configure IP , VLAN, and QoS parameters. Figure 5-2. MGP Config T ab Genera l The upper section of the MGP Config tab provides general information about a specific Me ...
Avaya C360 Manager User Guide 63 G700 Media Gateway IP Address Settings Y ou can manually configure the IP address settings for the Media Gateway . The Current IP box displays the IP address configuration currently being used. The information in the Current IP box is Read-only . The Configuration IP box displays the IP configuration. The following ...
Chapte r 5 64 Avaya C360 Manager User Guide QoS Parameters QoS can be controlled either locally or remotely . If control is remote, the information for the se f ield s come s from the gatekeeper . If control is local, you can configure the 802 Priority and DSCP fields. The following table lists the QoS parameters and their descriptions. In addition ...
Avaya C360 Manager User Guide 65 G700 Media Gateway MGC Config The MGC Config tab provides information about the Media Gateway Controller’ s settings, IP addr ess , and registration information. Figure 5-3. MGC Config T ab MGC IP Settings The MGC registers with the Media Gatewa y , after which it receives its IP address from the Media Gateway . A ...
Chapte r 5 66 Avaya C360 Manager User Guide T o add an entry to the Configurable MGC list: 1. Click Insert . A new row appears. 2. Enter the IP address for the entry . The new entry is cre ated. The MGCs are register ed in the order that they appear in the MGC list. T o modify an entry in the Configurable MGC list, modify the information in the ent ...
Avaya C360 Manager User Guide 67 G700 Media Gateway Viewing Media Module Configuration T o view the Media Module Configuration dialog box: In Configuration Mode, click the me dia module symbol in the T ree Vi e w . Or Click the media module’ s label in the Chassis V iew . The Media Module Configuration dialog box opens. Figure 5-4. Media Module C ...
Chapte r 5 68 Avaya C360 Manager User Guide The following table lists the fields in the Media Module Configurati on dialog box and their description. A vaya Site Administration A vaya Site Administration (ASA) is an administration tool for A vaya Call Processing call control software. ASA is used to configure the current MGC, G700 Media Gateway , o ...
Avaya C360 Manager User Guide 69 G700 Media Gateway If you have a registered call contro ller MM installed in your G700 Media Gateway , you can launch ASA on the call co ntroller . T o launch ASA on a registered call controller media module: 1. Select the registered call control ler media module. 2. Select Tools > Administer Call Controller . AS ...
Chapte r 5 70 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 71 6 V oIP Engine Configuration This chapter provides information and instructions for viewing and configuring the V oIP Engine features. It includes the following sections: • Vo I P O v e r v i e w - An overview of V oIP Engine functionality in G700 Media Gateway modules. • Configurin g the V oIP Engine - Instruct ...
Chapte r 6 72 Avaya C360 Manager User Guide V oIP Resources The VoIP resources tab provides administration parame ters common to all V oIP engines, such as the number of engines, QoS parameters, R TCP configuration, and RSVP configuration. Figure 6-1. V oIP reso urces T ab Genera l The upper section of this dialog box displays general informati on ...
Avaya C360 Manager User Guide 73 VoIP Engine Configurat ion QoS QoS can be controlled either locally or remotely . If control is local, it is possible to configure QoS, R TCP , an d RSVP parameters. If control is remote, QoS paramet ers are determined by the MGC. The following table lists the QoS fields and their descripti ons. RTP port Max The max ...
Chapte r 6 74 Avaya C360 Manager User Guide RTC P M o ni t o r in g RTCP is an IP protocol that is used to monitor the quality of R TP packets. Quality is measured in terms of delay , jitter , and packet loss. If RTCP moni toring is enabled, the V oIP engines send RTCP packets to the RTCP monitor . Y ou must configure an IP address for the R TCP mo ...
Avaya C360 Manager User Guide 75 VoIP Engine Configurat ion RSVP RSVP is a protocol that signals the router to reserve ban dwidth. If RSVP is enabled, the G700 Media Gateway tries to reserve a specific amount of bandwidth per call session. If this fails, th e Media Gateway tries to reallocate the band width during the call session. The following ta ...
Chapte r 6 76 Avaya C360 Manager User Guide V oIP Config The VoIP config tab allows you to view info rmation about a specific V oIP engine’ s confi guratio n. Figure 6-2. V oIP config T ab Y ou can configure the IP address to be used in the IP Static Address field. In addition, it is possible to see how many V oIP channels are available on this e ...
Avaya C360 Manager User Guide 77 VoIP Engine Configurat ion V oIP Status The VoIP status tab provides information about a specific engine’ s operational status, jitter buffer size, and number of sessions open. Figure 6-3. V oIP status T ab The information in the VoIP status tab is provided by the V oIP engine and is refreshed periodically . The f ...
Chapte r 6 78 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 79 7 W AN Configuration This chapter provides information about configuring A vaya X330W AN Expansion Modules and includes the fo llowing sections: • X330W AN Overview - An overview of X330W AN functionality in A vaya C360 Devices. • A v aya X330W AN Expansion Module Configuration - Information about viewing and co ...
Chapte r 7 80 Avaya C360 Manager User Guide A vaya X330W AN Expansion Module Configuration The X330W AN Expansion Module config uration dialog box provides you with information specific to a sele cted W AN expansion module. T o view the configuration of an expansion module: Click the expansion module symbol in the T ree View . Or Click the expansio ...
Avaya C360 Manager User Guide 81 WAN Configuration E1/T1 Port Configuration In addition to the Ethernet ports found on an A vaya C360 device, the X330W AN expansion module may ha ve E1/T1 ports. This section provides information on viewing and configuring E1/T1 po rt parameters. T o display the E1/T1 Port Configuration dialog box, click the E1/T1 p ...
Chapte r 7 82 Avaya C360 Manager User Guide The following table lists the E1/T1 Port Configuration fields and their descriptions: T able 7-1. E1/T1 Port Configuration Parameters Field Description Description The E1/T1 port descriptio n. Port Type The type of E1/T1 port. Possible values are: • E1 - For E1 and ISDN lines wi th 32 available channels ...
Avaya C360 Manager User Guide 83 WAN Configuration Linecode The type of linecode. Possible values are: For an E1 line: • HDB3 • AMI For a T1 line: • B8ZS • AMI Cablelength (T1 only) The recommended maximum cable length. Gain (T1 only) The gain on this interface. Clock Source The source of the T ransmit C lock. Possible sources include: • ...
Chapte r 7 84 Avaya C360 Manager User Guide Viewing Channel Group Information The Channel Group dialog box contains provide information specific to a selected Channel Group. The tabs that appear in the Channel Group dialog box are dependant on the encapsulation method of the selected Channel Group. T o view the Channel Group dialog box for a specif ...
Avaya C360 Manager User Guide 85 WAN Configuration Channel Gr oup The Channel Group tab of the Channel Group dialog box provides basic information about the selected Channel Group. T o view the Channel Group tab of the Channel Group dialog box: 1. Click a Channel Group icon in the Chassis V iew . A list of Channel Groups on the port appears. 2. Cli ...
Chapte r 7 86 Avaya C360 Manager User Guide Encapsulation The encap sulation method for the PPP session. Possible encapsulation types are: • PPP • Frame Relay Idle Characters The bit pattern used to signify an idle line. Possible pattern s in clu de: • Flags • Mark Bandwi dth The effective bandwidth of the PPP session. Administrative Status ...
Avaya C360 Manager User Guide 87 WAN Configuration Advanced The Advanced tab of the Channe l Grou ps dialog box provides information about the channels that comprise the selected Channel Group and the Channel Group’ s speed factor . T o view the Advanced tab of the Channel Group dialog box: 1. Click a Channel Group icon in the Chassis V iew . A l ...
Chapte r 7 88 Avaya C360 Manager User Guide 3. Click Advanced . The Advanced tab of the Ch annel Group dialog box appears. Figure 7-4. Channel Group Di alog Box - Advanced T ab T o configure the channels that comp rise the Channel Group, check the checkboxes next to the channels you want included in the Channel Group. Uncheck the checkboxes next to ...
Avaya C360 Manager User Guide 89 WAN Configuration 3. Click PPP . The PPP tab of the Channel Group dialog box appears. Figure 7-5. Channel Group Dialog Box - PPP T ab The following table provides a list of the fields in t he PPP tab of the Channel Group dialog box and their d escriptions: T able 7-3. Channel Group Dialog Box - PPP Parameters Field ...
Chapte r 7 90 Avaya C360 Manager User Guide Channel Gr oup - Frame Relay Information The Channel Group dialog box for Channel Groups using frame relay contains five tabs: • Channel Group - Basic information about the Channel Group. For information on the fields in the Channel Group tab of the Channel Group - Frame Relay dialog box, refer to “ C ...
Avaya C360 Manager User Guide 91 WAN Configuration • Advanced - Information about the channels that comprise the Channel Group. For inf ormation o n the f ields in the Advanced tab of the Channel Group - Frame Relay dialog box, refer to “ Advanced ” on p age 87 . • Frame Relay - Information about fra me relay on the Channel Group. • Sub-I ...
Chapte r 7 92 Avaya C360 Manager User Guide The following table provides a list of the fields in the Frame Relay ta b of the Channel Group dialog box and their descriptions: T able 7-4. Channel Group Dialog Box - Frame Relay Parameters Field Description LMI Type Local Management Interface T ype. The Data Link Connection Manag ement scheme used by t ...
Avaya C360 Manager User Guide 93 WAN Configuration Sub- Interfaces The Sub-Interfaces tab of the Channel Group dialog box p rovides information about the configuration of Frame Relay sub-interfaces in the Channel Group. T o view the Sub-Interfaces tab of the Channel Group dialog box: 1. Click a Channel Group icon in the Chassis V iew . A list of Ch ...
Chapte r 7 94 Avaya C360 Manager User Guide 3. Click Sub-Interfaces . The Sub-Interfaces ta b of the Channel Gro up dialog box appears. Figure 7-7. Channel Group Dialog Box - Sub-Interfaces T ab The Sub-Interfaces tab of the Channel Group dialog box p rovides a list of Frame Relay sub-interfaces in the upper se ction of the dialog box. T o view con ...
Avaya C360 Manager User Guide 95 WAN Configuration T o delete a Frame Relay sub-interface: 1. Click the Frame Relay sub-inte rf ace you want to delete. * Note: Y ou can only delete Frame Rela y sub-interfaces on which no IP interfaces are defined. 2. Click Delete . 3. Click Apply . The sub-interface is deleted. The following table provides a list o ...
Chapte r 7 96 Avaya C360 Manager User Guide DLCIs The DLCIs tab of the Channel Group dialog box provides information about the DLCIs (Data Link Connection Identifiers) in the Channel Group and enables you to create, modify , and delete DLCIs, and associate a DLCI with a specific Frame Relay sub-interface. T o view the DLCIs tab of the Channel Group ...
Avaya C360 Manager User Guide 97 WAN Configuration 2. Click the Channel Group you want to configure. The Channel Group dialog box opens with the Channel Group tab. 3. Click DLCIs . The DLCIs tab of the Channel Group dialog box appears. Figure 7-8. Channel Group Dialog Box - DLCIs T ab The DLCIs tab of the Channel Group dial og box provides a list o ...
Chapte r 7 98 Avaya C360 Manager User Guide 3. Click Apply . The DLCI parameters are modified. T o delete a DLCI: 1. Click the DLCI you want to delete. 2. Click Delete . 3. Click Apply . The DLCI is deleted. The following table provides a list of the fields in the DLCIs tab of the Channel Group dialog box and their d escriptions: T o configure the ...
Avaya C360 Manager User Guide 99 WAN Configuration If more than one DLCI is configured on the Channel Group, the priorities must be distributed among the DLCIs, and no priority can be configured on more than one DLCI. For example, if there are three DLCIs configu red for a Channel Group, the first DLCI may be configured with Primary and High priori ...
Chapte r 7 100 Avaya C360 Manager User Guide Each row of the Channel Groups tabl e represents a valid Channel Group. The following table provides a list of the fields in the Channel Groups table and their descriptions: T able 7-7. Channel Groups T able Parameters Field Description Module The number of the module in which the Channel Group exists. C ...
Avaya C360 Manager User Guide 101 WAN Configuration Cr eating, Editing, and Deleting Channel Gr oups T o create a new channel group, click Wizard in th e Channel Groups table. The Channel Group W izard starts. T o edit a channel group: 1. In the Channel Groups T able, select the channel group which you wish to edit. 2. Click Wizard . The Channel Gr ...
Chapte r 7 102 Avaya C360 Manager User Guide Wel c o m e Scr een The Channel Group W izard provides a simple, step -by-step method for creating or editing a Chan nel Group. Figure 7-10. Channel Group Wizard - W elcome Screen T o continue, click Next . The Channel Group W izard continues with the Select Name and Encapsulation Screen . Select Name an ...
Avaya C360 Manager User Guide 103 WAN Configuration Select an encapsulation method for the Channel Group from the pull-down listbox. A vailable encapsulation methods include: • PPP - The Channel Group uses PPP Sessions. • FrameRelay - The Channel Group uses fra me relay . T o continue, click Next . The Channel Group W izard continues with the S ...
Chapte r 7 104 Avaya C360 Manager User Guide Select Channels and Speed Scr een The Select Channels and Speed screen enables you to select channels for the new Channel Group. Figure 7-13. Channel Group Wizard - Select Channels and Speed Screen T o select channels, check the checkbox es next to the channels you want included in the channel group. For ...
Avaya C360 Manager User Guide 105 WAN Configuration Confirmation Scr een The Channel Group W izard displays a summary of the inform ation entered using the previous screens. * Note: The Channel Group has not yet been created. Figure 7-14. Channel Group Wizard - Confirmation Screen T o make any changes to the summary information: 1. Click Back until ...
Chapte r 7 106 Avaya C360 Manager User Guide USP - PPP Interface For USPs configured with a PPP inte rface, the USP dialog box conta ins three tabs: • Serial Port • Advanced • PPP Serial Port The Serial Port tab of the USP Configuration dialog box provides basic information about the configuration of the USP . T o view the Serial Port tab of ...
Avaya C360 Manager User Guide 107 WAN Configuration The following table lists the configuratio n fields in the Serial Port tab of the USP Configuration dialog box and their descriptions: T able 7-8. USP Dialog Box - Serial T ab Parameters Field Description Description The USP port description. Port Type The type of port - Universal Serial Port . Po ...
Chapte r 7 108 Avaya C360 Manager User Guide Advanced The Advanced tab of the USP Configur ation d ialog box provides advanced information about the USP configuration. T o display the Advanced tab of the USP Configuration dialog box: 1. Click the USP symbol in the Chassis V iew or the T ree V iew . The USP Configuration dialog box opens displaying ...
Avaya C360 Manager User Guide 109 WAN Configuration 2. Click the Ad vanced tab. The Advanced tab of the USP Configuration dialog box appears. Figure 7-16. USP Configuration Dialog Box - Advanced T ab The following table lists the configurat ion fields in the Advanced tab of the USP Configuration dialog box and their descriptions: T able 7-9. USP Co ...
Chapte r 7 110 Avaya C360 Manager User Guide DSR The port’ s Data Set Ready status. Possible values are: • Up - The port’ s data set has successfully been prepared. This process takes p lace during initial line signalling. • Down - The port’ s data set has either failed preparation or has completed the preparation process. DTR The port’ ...
Avaya C360 Manager User Guide 111 WAN Configuration Ignore DCD The signal type monitored to determine the interface’ s status. Possible values are: • On - The interface monitors DSR/CTS signals and ignores DCD signals. • Off - The interface monitors DCD signals. transmitter-delay Number The number of flags tra nsmitted between consecutive fra ...
Chapte r 7 112 Avaya C360 Manager User Guide PPP The PPP tab of the USP Configuration dialog box provides information about the USP’ s PPP configuration. T o display the PPP tab of the USP Configuration dialog box: 1. Click the USP symbol in the Chassis V iew or the T ree V iew . The USP Configuration dialog box opens displaying the Serial Port t ...
Avaya C360 Manager User Guide 113 WAN Configuration The following table lists the configuration fields in the PPP tab of the USP Configuration dialog box and their descriptions: T able 7-10. USP Configuration - P PP Parameters Field Description Peer Address The IP address of the PPP session’ s peer . MTU Maximal T ransmission Unit. The size of th ...
Chapte r 7 114 Avaya C360 Manager User Guide USP - Frame Relay Interface For USPs configured with a frame relay interface, the USP dial og box contains five tabs: • Serial Port - Basic information abut the USP . For information on the fields in the Serial Port tab of the USP - Frame Relay dialog box, refer to “ Serial Port ” on page 106 . • ...
Avaya C360 Manager User Guide 115 WAN Configuration 2. Click Frame Relay . The Frame Relay tab of the USP dialog box appears. Figure 7-18. USP Dialog Box - Frame Relay T ab The following table provides a list of the fields in the Frame Relay tab of the USP dialog box and their descriptions: T able 7-11. USP Dialog Box - Frame Relay Parameters Field ...
Chapte r 7 116 Avaya C360 Manager User Guide Oper Status Th e operational status of the interface. Possible statuses include: • Up - The interface is up and can transmit and receive packets. • Down - The interface is down due to some failure, and cannot transmit or receive packets. • Te s t i n g - The interface is in testing mode and cannot ...
Avaya C360 Manager User Guide 117 WAN Configuration Sub- Interfaces The Sub-Interfaces tab of the USP dialog box provides information about the configuration of Sub-Frame-Relay interfaces in the USP . T o view the Sub-Interfaces tab of the USP dialog box: 1. Click a USP symbol in the Ch assis V iew or T ree V iew . The USP dialog box opens with the ...
Chapte r 7 118 Avaya C360 Manager User Guide 2. Enter the parameters for the Frame Relay sub-interface using the fields at the bottom of the dialog box. 3. Click Apply . The Frame Relay sub-interface is created. T o modify the parameters of a Frame Relay sub-inte rface: 1. Click the Frame Relay sub-inte rface you want to modify . The configuration ...
Avaya C360 Manager User Guide 119 WAN Configuration Administrative Status The state of the selected port. Possible values are: • Enabled - The port is enabled and can transmit and receive pack ets. • Disabled - The port is disabled and cannot transmit or receive packets. Operational Status The op erational status of the Sub-Frame-Relay interfac ...
Chapte r 7 120 Avaya C360 Manager User Guide DLCIs The DLCIs tab of the USP dialog box provides information abo ut the DLCIs in the USP . T o view the DLCIs tab of the USP dialog box: 1. Click a USP symbol in the Ch assis V iew or T ree V iew . The USP dialog box opens with the Serial Port tab. 2. Click DLCIs . The DLCIs tab of the USP dialog box a ...
Avaya C360 Manager User Guide 121 WAN Configuration T o modify the parameters of a DLCI: 1. Click the DLCI you want to modi fy . The configuration parameters of the selected DLCI appear in the bottom of the dialog box. 2. Modify the parameters you want to change using the field s at the bottom of the dialog box. 3. Click Apply . The DLCI parameters ...
Chapte r 7 122 Avaya C360 Manager User Guide T o configure the priority of DLCI tr affic, select the checkboxes for the priorities to use on the DLCI. If only one DLCI is configured for the USP , all traffic uses the DLCI. If more than one DLCI is configured on the USP , the priorities must be distributed among the DLCIs, and no priority can be con ...
Avaya C360 Manager User Guide 123 WAN Configuration T o vie w the Backup Interfaces table, sele ct Configure > WAN > Backup Interfaces . The Backup Interfaces table opens. Figure 7-21. Backup Interfaces T able The Backup Interfaces table prov id es information about the Backup interfaces configured on the device. T o configure a new Backup in ...
Chapte r 7 124 Avaya C360 Manager User Guide The Backup Interface Wizar d This section provides detailed info rmation on each of the Backup Interface W izard’ s screens. T o continue to the next screen , click Next . T o return to an earlier screen, click Back . T o exit the Backup Interface W izard without making any changes, click Cancel . The ...
Avaya C360 Manager User Guide 125 WAN Configuration Wel c o m e Scr een The Backup Interface W izard provides a simple, step-by-step method for creating or editing a Backup interface. Figure 7-22. Backup Interface Wizard - W elcome Screen T o continue, click Next . The Backup Interface W izard continues with the Select Module Screen . Select Module ...
Chapte r 7 126 Avaya C360 Manager User Guide T o continue, click Next . The Backup Interface W izard continues with the Select Primary Interface Screen . Select Primary Interface Scr een The Select Primary Interface screen e n ables you to select the interface to be backed up. Figure 7-24. Backup Interface Wizard - Select Primary Inte rface Screen ...
Avaya C360 Manager User Guide 127 WAN Configuration Select Backup Interface Scr een The Select Backup Interface screen en ables you to assign an interface to back up the primary interface. Figure 7-25. Backup Interface Wizard - Select Backup Interface Screen T o select a Backup interface, se lect an interfac e na me from the Backup Interface pull-d ...
Chapte r 7 128 Avaya C360 Manager User Guide T o configure the number of seconds between the failure of the primary interface and the activation of the Backup interface, enter a number in the Enable Del ay field. T o configure the action taken when the primary interface returns to an acceptable operational status: • T o prevent the deactivation o ...
Avaya C360 Manager User Guide 129 WAN Configuration 3. Click Next until you reach the Confirmation screen. T o create the Backup interface or apply the changes to the Backup interface’ s configuration, click Fini sh . The Backup interface information is uploaded to the device, and the Back up Interfaces table is refreshed. ...
Chapte r 7 130 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 131 8 Port RMON This chapter explains the port RMON options of the A vaya C360 Device. T o view Port RMON information, you must be in Port RMON mode. T o switch to Port RMON mode: Click . Or Select View > Port RMO N . For more information on RMON, refer to RMON in The Reference Guide . * Note: Port RMON is n ot avai ...
Chapte r 8 132 Avaya C360 Manager User Guide Displaying the Port RMON Window T o display the Port RMON window , select a port or a LAG in the Chassis or T ree V iew . The Port RMON window opens. Figure 8-1. Port RMON Window The Port RMON window includes three sections. At the top of the window is a pie chart. In the center of the win dow is a graph ...
Avaya C360 Manager User Guide 133 Port RMON Viewing Tr a f f i c Statistics T o view traffic statistics, hold the mouse over a point on the gr aph representing the traffic for which you would like to see statistics. After two seconds, an info box appears displ aying the name of the traffic type represented by the line in the graphic, and the traffi ...
Chapte r 8 134 Avaya C360 Manager User Guide Fragments T otal number of Ethernet packets received at this port whose octet count is less than the minimum standa rd packet length. Frames T oo Long T otal number of Ethernet packets received at this port whose octet count is more than the maximum standard packet length . Jabber T otal number of Ethern ...
Avaya C360 Manager User Guide 135 9 VLANs This chapter provides the informatio n and instructions you need to use VLANs. It includes the following topics: • VLAN Configuration Overview - An overview of VLANs and their components. • V iewing t he VLAN Configuration Dialog Box - Instructions on how to access the VLAN Configuration dialog box and ...
Chapter 9 136 Avaya C360 Manager User Guide VLANs Overview The building blocks of VLANs are switch ports. T o build a new VLAN you need to define a VLAN name and number . Y ou can then add switch ports to the VLAN by configuring the PVID of the port to the VLAN number . The ports are m embers of the VLAN whose number is their PVID. In addition, you ...
Avaya C360 Manager User Guide 137 VLANs Viewing the VLAN Configuration Dialog Box T o view VLAN names, numbers, and component switch ports: Click . Or Select Configure > VLANs . The VLAN Configuration dialog box opens. Figure 9-1. VLAN Configuration Dialog Box The VLAN Configuration dialog box consi sts of the following components: • VLAN T re ...
Chapter 9 138 Avaya C360 Manager User Guide VLAN T r ee A tree providing a list of VLANs and their ports. Th e VLANs include all VLANs known on the network and all VLANs configured on the device. The ports listed under a VLAN include me mber ports and ports statical ly bound to the VLAN. T o expand or contract a b ranch of the table: Double-click t ...
Avaya C360 Manager User Guide 139 VLANs Selection List The Selection List contains a tabl e with VLAN information about the current selection. For example, if yo u select a module in the T ree V iew or Chassis V iew , a list of the ports in the module with their VLAN information appears in the Selection List. If the Port Configuration Area is open, ...
Chapter 9 140 Avaya C360 Manager User Guide Port Configuration Ar ea The Port Co nfiguration Area enable s you to configure a port’ s VLAN configuration. T o view the Port Configuration Area, click Port Configuration . The Port Configuration Area appears. Figure 9-3. Port Configuration Area The following table provides a list of the configuration ...
Avaya C360 Manager User Guide 141 VLANs Binding Style The binding style configured on the port. The binding style defines which p ackets can be forwarded by th e port. The follow ing binding styles are available: • Bind to All - The port is bound to all VLANs known to the device. This is also known as persistent binding. If a packet is on a VLAN ...
Chapter 9 142 Avaya C360 Manager User Guide Managing VLANs Y ou can create, delete, and rename VLANs. • Creating VLANs • Deleting VLANs • Renaming VLANs Cr eating VLANs T o create a new VLAN: 1. Click New . The Create VLAN dialog box opens. Figure 9-4. Create VLAN Dialog Box 2. Enter a VLAN nu mber in the VLAN ID field. * Note: The range of v ...
Avaya C360 Manager User Guide 143 VLANs Renaming VLANs To r e n a m e a V L A N : 1. Select the VLAN whose name yo u want to edit. 2. Click Rename . The Rename VLAN dialo g box opens. Figure 9-5. Rename VLAN Dialog Box 3. Edit the VLAN’ s name in the VLAN Name field. 4. Click OK . The VLAN is renamed. ...
Chapter 9 144 Avaya C360 Manager User Guide Synchr onizing VLAN Names VLANs with the same VLAN number can be defined with different names on different devices in the ne twork. In addition, VLAN names can be configured in the master VLAN lis t. This can cause confusion when referring to a VLAN by name rather than by number . The VLAN application ena ...
Avaya C360 Manager User Guide 145 VLANs 3. Click OK . The marked VLANs on the device are renamed with the VLAN names in th e master VLAN list. Deleting VLANs Y ou can delete VLANs from the A vaya C360 Device. Globally known VLANs can be deleted from the device, but not from the master VLAN list. If you delete a VLAN that is on the master VLAN list ...
Chapter 9 146 Avaya C360 Manager User Guide • T o select all of the ports associated with a VLAN (including member ports and statically bound ports), click the VLAN in the VLAN T ree. Viewing Port VLAN Settings T o view the VLAN configuration of a po rt, select a port in the T ree V iew , Chassis V iew , or VLAN T ree. The por t’ s VLAN configu ...
Avaya C360 Manager User Guide 147 VLANs Drag-and-Dr op T o configure the PVID of ports using drag-and-drop: 1. Select the ports you want to configure in the T r ee V iew , Chassis V iew , or VLAN T ree. For information on selecting ports, refer to “ Selecting Ports ” on page 145 . 2. Drag the ports until they are over a VLAN icon in the VLAN T ...
Chapter 9 148 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 149 10 Link Aggr egation Gr oups This chapter provides the informatio n and instructions for creating and using Link Aggregation Groups (LAGs). It includes the following topics: • LAGs Overview - An overview of LAGs. • V iewing t he LAG T able - Instructions on accessing the LAG T able and a d escription of the LAG ...
Chapter 10 150 Avaya C360 Manager User Guide Viewing the LAG T able To v i e w t h e L A G Ta b l e : Click . Or Select Configure > LAG . The LAG Information table opens. Figure 10-1. LAG Information Dialog Box Each row of the LAG table represents a valid Link Aggregation Group and provides the following information: • Name - The LAG name. • ...
Avaya C360 Manager User Guide 151 Link Aggregation Groups Cr eating LAGs T o create a new LAG, click Wizard . The LAG W izard starts. For more information, refer to “ The LAG W izard ” on page 151 . Editing LAGs T o edit an existing LAG: 1. Select a LAG by clicking on the row rep resenting the LAG. 2. Click Wizard . The LAG W izard starts. When ...
Chapter 10 152 Avaya C360 Manager User Guide W elcome Scr een The LAG W izard pro vides a simple, st ep-by-step method for creating a LAG. Figure 10-2. LAG Wizard - We lcome Screen T o continue, click Next . The LAG W izard continues with the Base Port Selection Screen . ...
Avaya C360 Manager User Guide 153 Link Aggregation Groups Base Port Selection Scr een The Base Port Selection screen of th e LAG W izard helps you select a base port for the LAG. The attributes of the base port (po rt speed, port mode, etc.) are applied to the other me mber ports of the LAG. Ports which can be selected as base ports appe ar white i ...
Chapter 10 154 Avaya C360 Manager User Guide Member Port Selection Scr een The Member Port Selection screen of the LAG W izard help s you select additional ports for the LAG. Ports which can be selected as additional ports appear in white in the Chassis V iew . Figure 10-4. LAG Wizard - Member Port Selection Screen T o select additional ports for t ...
Avaya C360 Manager User Guide 155 Link Aggregation Groups LAG Name Scr een The LAG Name screen of the LAG W izard enables you to assign a name to the LAG. Figure 10-5. LAG Wizard - LAG Name Screen T o assign a name to the LAG, en ter the name for the LAG in the LAG Name field. When you have entered a name for the LAG, click Next . The LAG W izard c ...
Chapter 10 156 Avaya C360 Manager User Guide Confirmation Scr een The LAG W izard displays a summary of the LAG information entered using the previous screens. The LAG has not yet been created. Figure 10-6. LAG Wizard - Confirmation Screen T o make any changes to the summary information: 1. Click Back until you reach the screen you wan t. 2. Change ...
Avaya C360 Manager User Guide 157 Link Aggregation Groups Deleting LAGs T o delete an existing LAG: 1. Click the row representing th e LAG you want to delete. 2. Click Delete . 3. The LAG is marked with the symbol. 4. Click Apply to update the device. For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on pa ...
Chapter 10 158 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 159 11 Port Redundancy This chapter provides the informatio n and instructions for using the Port Redundancy feature. It includes the followi ng topics: • Overview of Port Redundancy - An overview of port redundancy . • V iewing the Port Redundancy Dialog Box - Instructio ns on accessing the Port Redundancy dialog ...
Chapter 11 160 Avaya C360 Manager User Guide Individual member ports of a LAG can not participate in a Port Redundancy . However , you can define Port Red undancy on a complete LAG. * Note: T o edit Port Redundancy information, you must delete the Port Redundancy , and create a new one. For more information on Po rt Redundancy , refer to Redundancy ...
Avaya C360 Manager User Guide 161 Port Redundancy The following table provides a list of the fields in the Port Re dundancy dialog box and their descriptions: T o configure the device’ s port redundancy configu ration: 1. Enter an amount in the Switch Over field. 2. Select one of the Switch Back option buttons. 3. If you selected After x sec , en ...
Chapter 11 162 Avaya C360 Manager User Guide 4. Update the device. For more information on updating the device, refer to “ Updating the Device ” on page 169 . Adding a Port Redundancy T o add a new Port Redundancy: 1. Click Wizard . The Port Redundancy W izard starts. For mo re information, refer to “ Port Redundancy W izard ” on page 163 . ...
Avaya C360 Manager User Guide 163 Port Redundancy Port Redundancy Wizar d This section provides detailed in formation on each of the Port Redundancy W izard’ s screens. T o continue to the next screen, click Next . T o return to an earlier screen, click Back . T o exit the Port Redundancy W izard without making any changes, click Cancel . The Por ...
Chapter 11 164 Avaya C360 Manager User Guide W elcome Scr een The Port Redundancy W izard provides a simple, step-by-step method for creating a Port Redundancy . Figure 11-2. Port Redundancy Wizard - W elcome Screen T o continue, click Next . The Port Redund ancy W izard continues with the Primary Port Selection Screen . ...
Avaya C360 Manager User Guide 165 Port Redundancy Primary Port Selection Scr een The Primary Port Selection screen of the Port Redundancy W izard helps you select a primary port for the Port Redun dancy . Ports and LAGs which can be selected as primary ports appear in white in the Chassis V iew . Figure 11-3. Port Redundancy Wizard - Primary Port S ...
Chapter 11 166 Avaya C360 Manager User Guide Secondary Port Selection Scr een The Secondary Port Selection screen of the Port Redundan cy W izard allows you to select a secondary port for the Port Redundancy . Por ts and LAGs that can be selected as second ary ports appear white in the Chassis Vi e w. Figure 11-4. Port Redundancy Wizard - Secondary ...
Avaya C360 Manager User Guide 167 Port Redundancy Name and T ype Scr een The Port Redundancy Name and T ype screen of the Port Redundancy W izard allows you to assign a na me for the Port Redundancy , and determine if the redundancy is an intermodule port redundancy . Figure 11-5. Port Redundancy Wizard - Name and T ype Screen T o assign a name to ...
Chapter 11 168 Avaya C360 Manager User Guide Confirmation Scr een The Port Redundancy W izard displays a summary of the Port Redundancy information entered using the previous screens. The Port Redundancy has not yet been created. Figure 11-6. Port Redundancy Wizard - Confi rmation Screen T o make any changes to the summary information: 1. Click Bac ...
Avaya C360 Manager User Guide 169 Port Redundancy Deleting Port Redundancies T o delete an existing Port Redundancy: 1. Select a Port Redundancy from the Port Redundancy di alog box. — T o select more than one Port Redundancy , press CTRL w hile clicking on additional Port Redundancies. 2. Click Delete . The selected Port Redundancies are marked ...
Chapter 11 170 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 171 12 Port Mirr oring This chapter provides the informatio n and instructions for using the Port Mirroring feature. It includes the following topics: • Port Mirroring Overview - An overview of port mirroring. • Configurin g Port Mirrori ng - Instructions on adding, editing, and deleting a port mirroring pair . • ...
Chapter 12 172 Avaya C360 Manager User Guide The Port Mirr oring Wizar d This section provides de tailed information on each of the Port Mirro ring W izard’ s screens. T o continue to the next screen, click Next . T o return to an earlier screen, click Back . T o exit the Port Mirroring W izard without making any changes, click Cancel . The Port ...
Avaya C360 Manager User Guide 173 Port Mirroring Cr eate W elcome Scr een The Port Mirroring W izard provides a simple, step-by-step method for defining a Port Mirroring pair . Figure 12-1. Port Mirroring Wizard - Create W elcome T o continue, click Next . The Port Mirroring W i zard continues with the Edit/Delete W elcome Screen . ...
Chapter 12 174 Avaya C360 Manager User Guide Edit/Delete W elcome Scr een The wizard offers the choice of deleting or editing the existing Port Mirroring configuration. Figure 12-2. Port Mirroring Wizard - E dit/Delete Welcome Scre en T o delete the existing Port Mirroring configuration: 1. Select the Delete conf iguration option button. 2. Click N ...
Avaya C360 Manager User Guide 175 Port Mirroring Sour ce Port Selection Scr een The Source Port Selection screen of the Port Mirroring W izard helps you select a source port for the Port Mirroring pair . Ports which can be selected as sources appear in white in the Chassis V iew . Figure 12-3. Port Mirroring Wizard - Source P ort Selection Screen T ...
Chapter 12 176 Avaya C360 Manager User Guide Destination Port Selection Scr een The Destination Port Selection screen of the Port Mirroring W izard helps you select a destination port or LAG for the Port Mirroring pair . Ports and LAGs which can be selected as destin ations appear white in the Chassis Vi e w. Figure 12-4. Port Mirroring Wizard - De ...
Avaya C360 Manager User Guide 177 Port Mirroring Frames Dir ection Selection Scr een The Frames Direction Selection scre en of the Port Mirroring W izard enables you to select the traffic to be copied to the destination port. Y ou can configure the destination port to receive all traffic going through the source port, or only the traffi c received ...
Chapter 12 178 Avaya C360 Manager User Guide Confirmation Scr een The Port Mirroring W izard displays a summary of the Port Mirroring information entered using the prev ious screens. The Port Mirroring configuration has not yet been uploaded to the d evice. Figure 12-6. Port Mirroring Wizard - Confi rmation Screen T o make any changes to the summar ...
Avaya C360 Manager User Guide 179 13 IP Multicast Filtering This chapter provides in formation on configuring IP Multicast Filterin g on the A vaya C360 Device. It includes the following sections: • IP Multicast Filtering Overview - A brief overview of IP Multicast Filtering. • Configuring IP Multicast Filtering - Instructions on accessing the ...
Chapter 13 180 Avaya C360 Manager User Guide Configuring IP Multicast Filtering T o configure IP Multicast Filtering: Click . Or Select Configure > IP Multicast Filtering . The IP Multicast Filtering dialog box opens. Figure 13-1. IP Multicast Filtering Dialog Box The IP Multicast Filtering dialog box enabl es you to configure IP Multicast filte ...
Avaya C360 Manager User Guide 181 IP Multicast Filteri ng The following table provides a list of the fields in the IP Multicast Filtering dialog box and their descriptions: T o change the IP Multicast filtering configuration for the A vaya C360 Device, change the IP Multicast filtering parameters. T o apply the changes, click Apply . T o refresh th ...
Chapter 13 182 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 183 14 T rap Managers Configuration This chapter provides the information and instructions for con figuring managers for the A vaya C360 Device. It in cludes the following topics: • T rap Manager Overview - An overview of trap managers. • V iewing t he Stack T rap Managers T able - Instructions o n accessing the de ...
Chapter 14 184 Avaya C360 Manager User Guide Media Gateway modules and X330W AN expansion modules each have their own trap tables. Managers can be assigned to individual modules and need not receive traps fro m modules for which they are not responsible. Viewing the Stack T rap Managers T able The Stack T rap Managers tables are used to configure t ...
Avaya C360 Manager User Guide 185 Trap Managers Conf iguration Figure 14-1. Stack T rap Managers T able - SNMPv1 Legacy T ab The following table provides a list of device trap types, their associated icons, and their descriptions. Ta b l e 1 4 - 1 . Tr a p Ty p e s Icon Tr a p Description T rap Enable Enables trap reporting for the selected manager ...
Chapter 14 186 Avaya C360 Manager User Guide For information on adding and removing trap managers and editin g their trap reporting statuses, refer to “ Editing the T rap Managers T able ” on page 193 . Stack T rap Managers T able - SNMPv3 T ab T o view the Stack T rap Managers T able SNMPv3 tab: 1. V erify that a G700 or X330W AN module is not ...
Avaya C360 Manager User Guide 187 Trap Managers Conf iguration Figure 14-2. Stack T rap Managers T able - SNMPv3 T ab The following table provides a list of the fields in t he SNMPv3 tab of the Stack T rap Manager T able dialog box and their descriptions. T able 14-2. Stack T rap Manager Options - SNMPv3 T ab Field Description Manager IP IP address ...
Chapter 14 188 Avaya C360 Manager User Guide Inform Retry Count The number of times the device will attempt to send an Inform message to the T rap Managers. Possible values are 1-10. Config Ch a nge Ev en t s When checked, Config Change events are sent to the manager . SW Redundancy Events When checked, Software Redundancy ev ents are sent to the m ...
Avaya C360 Manager User Guide 189 Trap Managers Conf iguration Viewing the Media Gateway T rap Managers Ta b l e T o view the T rap Managers table for a G700 Media Gateway: 1. Select the G700 Media Gateway for which you want to view the T rap Managers table. * Note: Each G700 Media Gateway module has its own T rap Managers table, which can be used ...
Chapter 14 190 Avaya C360 Manager User Guide T o enable RTP QoS Fault traps on the Media Gateway module, check the Enable RTP QoS Fault traps checkbox. T o disable frame relay traps on the Media Gateway module, uncheck the Enable RTP QoS Fault traps checkbox. The following table provides a list of tra p types, their associated icons, a nd their des ...
Avaya C360 Manager User Guide 191 Trap Managers Conf iguration Viewing the W AN T rap Managers T able T o view the T rap Managers table for an X330W AN expansion module: 1. Select the X330W AN expansion module for which you want to view the T rap Managers table. * Note: Each X330W AN expansion module has its own T rap Managers table, which can be u ...
Chapter 14 192 Avaya C360 Manager User Guide T o enable frame relay traps on the X330W AN expansion module, check the Enable st a ndard frame r elay traps checkbox. T o disable frame relay traps on the X330W AN expansion module, uncheck the Enable stan da rd frame relay traps checkbox. The following table provides a list of tra p types, their assoc ...
Avaya C360 Manager User Guide 193 Trap Managers Conf iguration Editing the T rap Managers T able Y ou can add and remove managers f rom the T rap Managers table, a nd you can edit the trap reporting status of specific managers. Adding and Removing Managers T o add managers to the table: 1. Click Insert . 2. Enter the IP address of the designated ma ...
Chapter 14 194 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 195 15 Switch Connected Addr esses This chapter provides the information and instructions for viewing stations connected to the device. It includes the following topics: • Switch Connected Addresses Overview - An overview of the Switch Connected Addresses feature. • V iewing t he Switch Connected Addresses W indow ...
Chapter 15 196 Avaya C360 Manager User Guide Viewing the Switch Connected Addresses Window The Switch Connected Addresses window provides a list of MAC addresses along with the ports to whic h the y are attached. T o view the list of connected stations: Click . Or Select View > Switch Connected Addresses . The Switch Connected Addresses window o ...
Avaya C360 Manager User Guide 197 Switch Connected Addresse s Sorting the List of Stations T o sort the list of stations, click on a column heading to sort by that column. T o change the order of th e sort (e.g. from ascending to descending), click the column heading of the field by which the list is sorted. For more information on the user interfa ...
Chapter 15 198 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 199 16 Port Security This chapter provides the informatio n and instructions you need to use port security with A vaya C360 ports. Port security enables you to prev ent unauthorized users an d devices from sending information through the ports in your network. The following method of port security is available for A va ...
Chapter 16 200 Avaya C360 Manager User Guide Configuring 802.1x Port Security T o configure 802.1x port security for a selected port: 1. Click the port symbol in the Chassis V iew . Or Click the port’ s icon in the T ree V iew . The Port Configuration dialog box opens to the General tab. 2. Click 802.1x . The 802.1x tab of the Port Configuration ...
Avaya C360 Manager User Guide 201 Port Security The following table provides a list of the fields in t he 802.1x tab of the Port Configuration dialog box and their descriptions: T able 16-1. Port Configuration Fields - 802.1x T ab Field Description EAP State The Entity Access Port state. Possible states include: • Initialize • Disconnected • ...
Chapter 16 202 Avaya C360 Manager User Guide For more information on the user interface, refer t o “ Using Dialog Boxes and T ables ” on page 16 . The Get/Set T oolbar provides an alte rnative, quick method to view and change the port’ s 802.1x configuration. For more information on the Get/Set T oolbar , refer to “ Get/Set T oolbar ” on ...
Avaya C360 Manager User Guide 203 Port Security MAC Port Security This section provides in formation and instructio ns about using the M AC Port Security feature. It in cludes the following topics: • MAC Port Security Overview - An overview of MAC Port Security . • Configuring MAC Port Security - Instructions on how to configure MAC Port Securi ...
Chapter 16 204 Avaya C360 Manager User Guide Figure 16-2. MAC Port Security Dialog Box 2. Check the Device Security Mode check box. 3. In chassis view , click on the port you want to secure. The port will appear in the Ports c hanged t o secure list. 4. Click Apply . T o remove MAC Port Security fr om a previously secured port: 1. Select Con figure ...
Avaya C360 Manager User Guide 205 Port Security The following table provides a list of the fields in the MAC Port Security dialog box and their descriptions: T able 16-2. MAC Port Security Parameters Field Description Device Security Mode When checked, the device is configured to use MAC Port Security for selected ports. Ports changed to secure Lis ...
Chapter 16 206 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 207 17 Routing Manager This chapter provid es an introduction to the A vaya C360 Routing Manager . It includes the following sections: • Router Modes - An introduction to the different modes of the A vaya C360 Router . • The User Interface - An introduction to t he A vaya C360 Routing Manager user interface. • Ed ...
Chapter 17 208 Avaya C360 Manager User Guide Router Modes The A vaya P330ML and C360 mod ules, and A vaya X330W AN expansion module provide routing capabilities in an A vaya C360 Stack. The A vaya C360 mo dule can be configured with one of the following routin g modes: • Router • Layer 2 Switch The default mode is Router . For in formation on c ...
Avaya C360 Manager User Guide 209 Routing Manager The User Interface The user interface consists of the fo llowing elements: • T oolbar - A toolbar providing shortcuts to the main Routing Manager functions. • T r ee V iew - A resizeable window containing a hierarchical representation of the router modules in the device and configuration windows ...
Chapter 17 210 Avaya C360 Manager User Guide T oolbar The T oolbar provides shortcuts to the main Routing Manager functions. The table below describes the buttons on the Application T oolbar and gives the equivalent menu options. T able 17-1. Application T oolbar Button Description Menu Item Undoes changes made to the table or form currently displa ...
Avaya C360 Manager User Guide 211 Routing Manager T r ee View The T ree View shows th e A vaya P330ML and C360 modules, and X330W AN expansion modules in th e device and the applicable configuration windows for each module. The highest level of the T ree V iew shows the device’ s router modules. Each module that is configured as a router is shown ...
Chapter 17 212 Avaya C360 Manager User Guide T able Ar ea The right side of the application win dow is the T able Area. This area can be resized by dragging the vertical sp litter bar with the mouse. All tables appear in the T able Area . T ab le columns can be resized by dragging the dividers in the table header . T o view additional parameters in ...
Avaya C360 Manager User Guide 213 Routing Manager Editing T ables The A vaya Routing Manager user interface enables you to create , modify , and delete table entries in selected windows. The information can be added directly into the table, or in the form associated with the tabl e. T o undo all the changes made to a table, click . When all changes ...
Chapter 17 214 Avaya C360 Manager User Guide Saving T able Information as T ext Information in tables can be saved to text files. T o save the information in the current table to a text file: 1. Select File > Save . The File Save dialog box opens. 2. Use the browser to select a directory . 3. Enter a filename in the File name field. 4. Click Sav ...
Avaya C360 Manager User Guide 215 Routing Manager Resetting a Router T o reset a router : 1. Click the router’ s icon in the T ree V iew . 2. Select Action > Reset . A confirmation dialog box opens. 3. Click Yes . The selected router is reset. Using A vaya C360 Routing Manager Help This section explains how to use the on-line help in the A vay ...
Chapter 17 216 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 217 18 Device The Device folder provides access to the following wind ows: • Device Global Parameters * Note: When configuring an A vaya X330W AN router , there is no Device Global Parameters window . Device Global Parameters * Note: When configuring an A vaya X330W AN router , there is no Device Global Parameters wi ...
Chapter 18 218 Avaya C360 Manager User Guide The following parameters are displayed: Y ou can edit the System Contact, System Name, and System Location fields. T able 18-1. Global Pa rameters Field Description System Description A general description of the device. System UpTime The time elapsed since the device was reset. System Contact The name o ...
Avaya C360 Manager User Guide 219 19 Layer 2 The Layer 2 fold er provides a ccess to the following window: • VLANs * Note: When configuring an A vaya X330W AN router , the Layer 2 folder provides access to the L2 Interfaces window . VLANs * Note: When configuring an A vaya X330W AN router , this window is called the L2 Interfaces window . T o dis ...
Chapter 19 220 Avaya C360 Manager User Guide The following parameters are displayed: The fields in the VLANs window are read-only . T able 19-1. VLANs Window Parameters Field Description VLAN No. (not for X330W AN router) The VLAN number of this VLAN. Interface No. (X330W AN router only) The number of this layer 2 interface. VLAN Name (not for X330 ...
Avaya C360 Manager User Guide 221 20 IP Route The IP Route folder provi des access to the following windows: • IP Global Parameters • IP Interfaces • Routing T able • ARP T able • DHCP • RIP • OSPF • VRRP • CRTP ...
Chapter 20 222 Avaya C360 Manager User Guide IP Global Parameters T o display and update the IP global parameters, select IP Route > IP Global Parameters . The IP Global Parameters window opens. Figure 20-1. IP Global Parameters Window The following parameters are displayed: T able 20-1. IP Global Parameters Field Description ICMP Error Messages ...
Avaya C360 Manager User Guide 223 IP Route IP Interfaces IP interfaces represen t the lo gical con n ections of the device to the IP nets/ subnets attached to it. Each IP inte rface corresponds to one net/subnet. When you create a new IP interf ace, RIP and OSPF interfaces are automatically created and assigned enable status. When you dele te an IP ...
Chapter 20 224 Avaya C360 Manager User Guide IP NetMask The IP network mask of the attached net/ subnet. VLAN Name (not for X330W AN router) The name of the Layer 2 interface with which this subnet is associated. Multiple subnets may be associated with a single VLAN, so multiple IP interfaces may be associated with the same If Name. L2 Interface Na ...
Avaya C360 Manager User Guide 225 IP Route Y ou can create, modify , and delete IP interfaces. For more information on editing tables, refer to “ Editing T ables ” on page 213 . * Note: The IP Address, IP NetMask, If Name, and Status must be defined before creating an IP interface. * Note: The list of VLANs allocated in the system is displayed ...
Chapter 20 226 Avaya C360 Manager User Guide The following parameters are displayed: T able 20-3. Routing T able Parameters Field Description Destination The destination network IP address of this route. An IP address of 0.0.0.0 denotes a default router . Netmask The destination network mask of this route. Next Hop The addr ess of the next router o ...
Avaya C360 Manager User Guide 227 IP Route Y ou can create, modify , or delete Rout ing T able static entries. For more information on editing tables, refer to “ Editing T ables ” on page 213 . * Note: Only static entries in the Routing T able can be modified. Entries learned from OSPF , RIP , or local cannot be modified. Static Preference The ...
Chapter 20 228 Avaya C360 Manager User Guide When adding Routing T able entries on an A v aya X330W AN router , you can configure the next hop me thod in the Fo rm V iew . A vailable next hop methods include: • Next Hop - Select the Next Hop option button, and enter the IP address of the next hop. • L2 Interface Name - Select the L2 Interface N ...
Avaya C360 Manager User Guide 229 IP Route ARP T able T o display and update the AR P T able parameters, select IP Route > ARP Table . The ARP T able window opens. Figure 20-5. ARP T able Window The following parameters are displayed: T able 20-4. ARP Parameters Field Description IP Address The IP address of the station. MAC Address The MAC addr ...
Chapter 20 230 Avaya C360 Manager User Guide Y ou can create or delete ARP table entries. For more information on editing tables, refer to “ Editing T ables ” on page 213 . Y ou can limit the table entries displaye d. T o start the display of entries from a specified interface an d IP address: 1. Click . Or Select Action > Start Point . The ...
Avaya C360 Manager User Guide 231 IP Route DHCP The DHCP folder provides access to the following windows: • DHCP/BOOTP Global Parameter • DHCP/BOOTP Parameters DHCP/BOOTP Global Parameter T o display and update the DHCP/B OOTP global parameters, select IP Route > DHCP > DHCP/BOOTP Global Param ete rs . The DHCP/BOOTP Global Parameters win ...
Chapter 20 232 Avaya C360 Manager User Guide DHCP/BOOTP Parameters T o display and update DHCP/ BOOTP parameters, select IP Route > DHCP > DHCP/BOOTP Parameter s . The DHCP/BOOTP Parameters window opens. Figure 20-8. DHCP/BOOTP Parame ters Window The following parameters are displayed: T able 20-6. DHCP/BOOTP Parameters Field Description VLAN ...
Avaya C360 Manager User Guide 233 IP Route Y ou can create, modify , or delete DHCP/BOOTP parameters. For more information on editing tables, refer to “ Editing T ables ” on page 213 . Relay Mode The method by which the DHCP relay cho oses an IP address to include in the DHCP request. When relaying a DHCP/BOOTP request, the relay has to write i ...
Chapter 20 234 Avaya C360 Manager User Guide RIP The RIP folder provides access to the following windows: • RIP Global Parameters • RIP Interfaces RIP Global Paramete rs T o display and update RIP global parameters, select IP Route > RIP > RIP Global Parameters . The RIP Global Parameters window opens. Figure 20-9. RIP Global Parameters W ...
Avaya C360 Manager User Guide 235 IP Route Y ou can modify RIP Global Paramete rs by checking boxes as desired. Redistri bu t e St a t ic into RIP Controls redistribution of static routes into RIP . If checked, the static routes inserted into the IP Routing T ab le are advertised into RIP , according to the "Leak Route" definition for eac ...
Chapter 20 236 Avaya C360 Manager User Guide RIP Interfaces T o define and display RIP interfaces, select IP Route > RIP > RIP Interfaces . The RIP Interfaces window opens. Figure 20-10. RIP Interfaces Window The following parameters are displayed: T able 20-8. RIP Interface Parameters Field Description Interface Name The name assigned to the ...
Avaya C360 Manager User Guide 237 IP Route RIP Version The router can be configured to operate either RIP version 1 or RIP version 2 on each IP interface. The configura tion of the RIP version must be consistent on each subnet. That is, all routers should be configured with the same RIP version on their interface to the subnet. When possible, homog ...
Chapter 20 238 Avaya C360 Manager User Guide * Note: In the Send field, selecting ‘ listen-only ’ or ‘ talk-listen ’ will prevent updating the Default Route Metri c field. Y ou can modify RIP interfaces. For more information on edi ting tables, refer to “ Editing T ables ” on page 213 . Default Route Mode If talk-listen , accepts defaul ...
Avaya C360 Manager User Guide 239 IP Route OSPF The OSPF folder provides access to the following windows: • OSPF Global Parameters • OSPF Interfaces • OSPF Area Parameters • OSPF Link State Database • OSPF External Database • OSPF Neighbors OSPF Global Parame ters T o define and display OSPF Global parameters, select IP Route > OSPF ...
Chapter 20 240 Avaya C360 Manager User Guide Y ou can modify OSPF Global Parameters. * Note: After updating the Router ID field, a message is displayed warning that the operation migh t cause the OSPF database to reset. OSPF Global St atus The administrative status of OSPF in the router . If not checked, OSPF is not active on any interface, regardl ...
Avaya C360 Manager User Guide 241 IP Route OSPF Interfaces T o define and display OSPF interfaces, select IP Route > OSPF > OSPF Interfaces . The OSPF Interface s window open s. Figure 20-12. OSPF Interfaces Window The following parameters are displayed: T able 20-10. OSPF In terfaces Field Description Interface Name (not for X330W AN) The na ...
Chapter 20 242 Avaya C360 Manager User Guide State The interface stat e of the OSPF interface: • Down - OSPF is not active on the interface. • Waiting - The identity of the designated router for this subnet is not yet determined. • Designated Router - This router is the Designated Router on this subnet. • Backup Designated Router - This rou ...
Avaya C360 Manager User Guide 243 IP Route Y ou can modify OSPF interfaces. For more information on editing tables, refer to “ Editing T ables ” on page 213 . OSPF Ar ea Parameters T o define and display OSPF Area Parameters, select IP Route > OSPF > OSPF Area Parameters . The OSPF Are a Parameters wind ow opens. Figure 20-13. OSPF Area P ...
Chapter 20 244 Avaya C360 Manager User Guide Y ou can modify OSPF Area parameters. OSPF Link State Database T o display the OSPF Link State Database, select IP Route > OSPF > OSPF Link State Database . The OSPF Link State Database window opens. Figure 20-14. OSPF Link State Database Window Area Border Route rs Count The total number of Area B ...
Avaya C360 Manager User Guide 245 IP Route The following parameters are displayed: The parameters in the OSPF Link State Database windo w are read-only . Y ou can limit the table entries displaye d. T o start the display of entries from a specified interface and IP address: 1. Click . Or Select Action > Start Point . The Start Point dialog box o ...
Chapter 20 246 Avaya C360 Manager User Guide 3. Click Start. The OSPF Link State Database displays entries starting with the specified LSA T ype. T o view all the entries in the OSPF Link State Database: Click . Or Select View > Refresh . All entries appear in the table. OSPF Exter nal Database T o display the OSPF External Database window , sel ...
Avaya C360 Manager User Guide 247 IP Route The parameters in the OS PF External Database window are read-only . OSPF Neighbors T o display the OSPF Neighbors window , select IP Route > OSPF > OSPF Neighbors . The OS PF Neighbors window opens. Figure 20-17. OSPF Neighbo rs Window Router ID Identifi es the originating router in the autonomous s ...
Chapter 20 248 Avaya C360 Manager User Guide The following parameters are displayed: The parameters in the OSPF Neighbors T able window are read-only . VRRP The VRRP folder provides access to the following windows: • VRRP Global Parameters • VRRP T able T able 20-14. OSPF Neighbors Parameters Field Description Neighbor Address The IP address of ...
Avaya C360 Manager User Guide 249 IP Route VRRP Global Parameters VRRP (V irtual Router Redund ancy Protoc o l) provides a method for configuring a redundancy between rout ers. A Master Router is selected for each V irtual Router . Backup routers function normally , while checking the Master Router . If the Master Router fails, the backup routers h ...
Chapter 20 250 Avaya C360 Manager User Guide VRRP T able T o define and display the VRRP table, select IP Route > VRRP > VRRP Table . The VRRP table opens. Figure 20-19. VRRP T able The following parameters are displayed: T able 20-16. VRRP T able Parameters Field Description VLAN Name (not for X330W AN) The name of the selected interface. L2 ...
Avaya C360 Manager User Guide 251 IP Route State The state of the virtual router . Possible stat es are: • initialize - The virtual router is not functional. • backup - The virtual router is monitoring the availability of the master router . • master - The virtual router is forwarding packets with IP addresses associated with this virtual rou ...
Chapter 20 252 Avaya C360 Manager User Guide T o associate IP addresses with a selected virtual router: 1. Select a virtual router in the VRRP table. 2. Ensure that the Form V iew is visible. 3. Enter the IP address to associ ate with the selected rou ter in the textbox under the IP Addresses listbox in the Form V iew . 4. Click . The IP address is ...
Avaya C360 Manager User Guide 253 IP Route CR TP The CRTP folder provides access to the following window: • CRTP Interfaces CR TP Interfaces The A vaya X330W AN router supports RTP compression, reducing the overhead of transmitting voice packets over the E1/T1 line. Y ou can configure CRTP (Compressed RTP) pa rameters for each PPP interface on th ...
Chapter 20 254 Avaya C360 Manager User Guide Y ou can modify CRTP parameters on P PP interfaces. For more information on editing tables, refer to “ Editing T ables ” on page 213 . Status The status of RTP compression on this interface. Possible statuses include: • Enabled - RTP compression is enabled on the interface. • Disab led - RTP comp ...
Avaya C360 Manager User Guide 255 A Menus This appendix gives the full structure of the menus in the A vaya C360 Manager . Device Manager Menus This section provides the menu structure of the A vaya C360 Device Manager . File Menu Vie w M enu T able A-1. File Menu - Dev ice Manager Item Descripti on Exit Exits the A vaya C360 Manager . T able A-2. ...
Appendix A 256 Avaya C360 Manager User Guide Configur e Menu Actions Menu T able A-3. Configure Menu - Device Manager Item Description Stack Configuration Disp lays informa tio n for the device. VLANs Displays and enables co nfiguratio n of VLANs. LAG Displays and enables configuration of LAG s. Port Redundancy Displays and enables configuration of ...
Avaya C360 Manager User Guide 257 T ools Menu Help Menu Reset Module(s) Resets the selected modules. Reset Media Module(s) Reset the selected media modules. Reset WAN Plugin(s) Reset the selected X330W AN expansion modules. Clear CAM Clear the A vaya C360 devices’ s CAM table of all learned MAC addresses. T able A-5. T ools Menu - Device Manager ...
Appendix A 258 Avaya C360 Manager User Guide Routing Manager Menus This section provides the menu structure of the A vaya C360 Routing Manager . File Menu Edit Menu Vie w Me nu T able A-7. File Menu - Routing Manager Item Description Save Saves the current tabl e to a text file. Commit Saves the current configur ation to the router . T able A-8. Ed ...
Avaya C360 Manager User Guide 259 Action Menu Help Menu T able A-10. Action Menu - Routing Manager Item Description Stop Stops loading in formation into the current table. Apply Sends the configuration inf ormation to the device. Start Point Opens the Start Po int dialog box for specifying th e starting point of entries displa yed in the table. Res ...
Appendix A 260 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 261 B W eb Management This appendix provides instructio ns for managing A vaya C360 Devices via the Internet and contains the following topics: • W eb Management Overview - An overview on W eb Management. • Configurin g the A vaya C360 Dev ice - Instructions on how to configure the A vaya C360 Device for the first ...
Appendix B 262 Avaya C360 Manager User Guide ...
Avaya C360 Manager User Guide 263 Index Numerics 802.1x port security 199 A Adding a Port Redundancy 162 managers to table 193 table entries 213 Additional table parameters viewing 212 Advanced tab Channel Group 87 USP 108 Application tabs 4 Application T oolbar buttons 210 Applying changes in tables 5 IP Multicast Filtering configuration 181 Port ...
264 Avaya C360 Manager User Guide Index Select Name and Encapsulation screen 102 W elcome screen 102 Chassis V iew 12 Application T oolbar 8 colors in 12 Get/Set T oolbar 10 selecting elements 14 Status Line 5 Committed changes 214 Configurable router 208 Configuration applying changes 214 committed changes 214 PVID 147 running changes 214 saving c ...
Avaya C360 Manager User Guide 265 Index Tr e e V i e w 11 user interface 7 DHCP DHCP/BOOTP Global Parameters window 231 DHCP/BOOTP Parameters window 232 overview 231 Dialog Area 15 Dialog box symbols 16 Discarding Port Redundancy changes 169 Distributing high-bandwidth applications 179 DLCI creating 97 , 120 deleting 98 , 121 modifying 97 , 120 DLC ...
266 Avaya C360 Manager User Guide Index unfreeze the graph 133 use on-line help 215 use the Device Manager Applicat ion T ool- bar 8 use the Get/Set T oolbar 10 view backup interfaces 122 zoom in and out of the graph 133 I Internet management configuration 261 overview 261 Introduction A vaya C360 Manager xi IP Global Parameters window 222 IP Inter ...
Avaya C360 Manager User Guide 267 Index Menus Device Manager 255 Routing Manager 258 structure 255 MG Config tab 61 MGC Config tab 65 MGC List 65 MGP Config tab 62 Modes Configuration 15 Port RMON 15 Router 208 routing 208 Second Layer 208 switching between 15 Modifying DLCIs 120 Sub-Frame-Relays 118 table entries 213 Module colors 12 configuration ...
268 Avaya C360 Manager User Guide Index viewing the Port Redundancy dialog box 160 Port Redundancy W izard Confirmation screen 168 Name and T ype screen 167 overview 163 Primary Port Selection screen 165 Secondary Port Selection screen 166 W elcome screen 164 Port RMON overview 131 pie chart 132 traffic graph 132 window 132 Power over Ethernet see ...
Avaya C360 Manager User Guide 269 Index Status GBIC ports 13 Line 5 tab, V oIP 77 Sub-Frame-Relay creating 94 , 117 deleting 94 , 118 modifying 94 , 118 Sub-Frame-Relays tab Channel Group 93 USP 117 Switch Config tab 60 Switch connected addresses overview 195 sorting list 197 window 196 Switching views 4 Symbols in tables 5 Synchronizing VLAN names ...
270 Avaya C360 Manager User Guide Index tables 16 USP Advanced tab 108 configuration 105 DLCIs tab 120 frame relay interface 114 Frame Relay tab 114 PPP interface 106 PPP tab 112 Serial Port tab 106 Sub-Frame-Relays tab 117 viewing information 105 V Vi e w i n g additional table parameters 212 backup interfaces 122 Channel Group information 84 Chan ...
Avaya C360 Manager User Guide 271 Index Device Global Parameters 217 DHCP/BOOTP Global Parameters 231 DHCP/BOOTP Parameters 232 IP Global Parameters 222 IP Interfaces 223 IP Routing T able 225 L2 Interfaces 219 OSPF Area Para meters 243 OSPF External Database 246 OSPF Global Parameters 239 OSPF Interfaces 241 OSPF Link State D atabase 244 OSPF Neig ...
272 Avaya C360 Manager User Guide Index ...
Avaya SMON C360のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SMON C360の取扱説明書
- Avayaの製品カード
- パンフレット
- またはAvaya SMON C360の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Avaya SMON C360の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Avaya SMON C360の取り付け説明書、サービスマニュアル、簡易説明書、またはAvaya SMON C360のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Avaya SMON C360の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Avaya SMON C360デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAvaya SMON C360を使用するのを助ける技術的文書のことです。説明書は通常、全てのAvaya SMON C360ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Avayaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Avaya SMON C360の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAvaya SMON C360の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Avaya SMON C360に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Avaya SMON C360デバイスの基本機能を使うにあたってのヒント。 Avaya SMON C360のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Avaya SMON C360に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAvaya SMON C360のメーカー/サービスへの連絡先に関する情報。
Avaya SMON C360についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAvaya SMON C360の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAvaya SMON C360で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。