ページに移動 of 98
NOTICE: This equipment has been tested and complied with the limits for a Class a digita l device, pursuan t to Part 15 of the FCC Rules. These li mits are designed to provide a reasonab le protection against harmful interface when the equ ipment is operated under a commercial environ ment. This equipment genera tes , uses, and can radiate radio fr ...
Using the ArgoxS can 800 0 The Argox Scan can auto matically sca n barcode at a d istan c e. Simply aim and pull the trigger . Code s canning is perfor m ed along the cen ter of the ligh t bar emitte d from the re ading window . T his bar must cover the en tire code. Success ful scanning shal l be obt ain ed by tilting the scanner with respect to t ...
CONTEN TS Chapter 1 In troduction Introduc tion…………… …………… ..…………… …. 1 Default Set ting.………… ………… ………… ………. 2 ArgoxScan80 00 speci fication.…… ………………. . 3 Programming the ArgoxScan 800 0 Serie s Scanner 6 Chapter 2 Para meter Se tting Interface………… ………… ? ...
T elepen.………… ………… ……… … ……………… . 74 S tanda rd 2 of 5 …………… ………………… … …… 76 RSS-14.…… …………… ………… …… …………… . 78 RSS-Limited …………… ………… ………… ..…… 80 RSS-Exp anded ……………… ……………… … ..….. 82 Chi ...
...
1 Introduction Inst al latio n- Ke yboar d W ed ge 1) First of all , you mus t switch of f po wer for the terminal/compu t er . 2) Disconnect the keyboar d cable fro m the back o f the terminal/compu t er and connect to the interface cable of the scanner . 3) Connect the interface cable of the scanner to the terminal/compu t er . 4) T urn the termi ...
2 Defa ult se tting For each barcode s how n as below : V = Enabled a s default se tting - = Not supported Empty sp ace = N ot enable d at de fault setting Code T y pe Read Enable Checksum V erificatio n Enable Checksum T ransmiss ion Enable Code ID UPC-A A UPC-E E EAN-13 F EAN-8 ? ...
3 AS-8000 Specification Weigh t 90 g (cable not included) Cable – K/B wedge S traight 2.0 m A rgo Sca n 8000 ser ies S pecifi cation Model A S-8000 se ries Operationa l Light Source 660 nm Vi s ible Red LED Optical Syste m 2048 pix el CCD (Charge-cou pled device) Depth of S can Field 0-180 mm (CODE 39, 500Lux, PCS=90 %, 20mil s) Scanning Width 50 ...
4 Connector type C rimp type female connector Case material ABS plastic Cushion ma terial TPR Electrical Input V o ltage 5 VDC ± 0.25V Power - Opera ting Ma x. 750 mW Power - S tandby 150 m W Current - Op erating Max . 150 mA @ 5 VDC Current - S tandby 30 mA @ 5 V DC DC T r ans formers C lass 2; 5VDC @ 450 mA Agency listing FCC Class A, CE Environ ...
5 Programming Programming method Manu al (Reading special barcode) , DOS command through RS-232 (RS-232 model) Programmab le characteristics Code type sele ction, che ck digit selection, Decoding option T rans mitted char acter delay , Head er selection, trailer selection , messag e suf fix, good rea d beep tone and volume, sc anner trigge r select ...
6 Programmi ng the ArgoScan 8000 Series Sca nner T o program the 8000 series scanne r , you must scan a serie s of progra mming barcode in the cor rect order . Fold out the back cover of this manual. Y ou will see a tab le of alphanu meric barcodes, wh ich are used to pro gram the var ious options presented . T o program each option, you m ust: 1. ...
7 Option Bar Code Option Alpha numeric Entry Scannin g mode Goo d-read of f Moment ary Alternate T imeout of f Continu e T est only 00 01 02 03 04 05 Program Exit Program Barcode Option Barcode Exit Barco de Back Fold Out Finish barcode ...
8 Interface Selection This decoder built-in scanner comes in thr ee mode ls and support s interfa ces such as k eyb o ard wed ge, RS232 serial, and the lates t USB interfa ce. Y ou will need to select an approp riate model for a specific in terface. Interface se lection: T he factory in terface default can not be changed for o ther type in terface. ...
9 Exit Keyboard wedge As a keybo ard interfa ce, the s canner supports most of the popular PCs and I B M t erminal s. Th e in stalla t ion o f the we dge is a fairly si mple pro cess without any changes of sof tware or hardw are. Keyboard T ype: AS- 8000 keyboa rd wedge model only support s keyboard interface with PS/2 typ e conne ctor . Option Bar ...
10 Keyboard wedge Keyboard Lay out: The selecting of key board lay out support s many country languag es o ther than USA keybo ard layout. First yo u need to c onfirm cou ntry languag e that you desire. In DO S, using command “ keyb” to s ele ct the desirable key board layout or in WINDOWS entry “ C ontrol” then pop s “Keyboa rd” to sel ...
1 1 Exit Keyboar d layout USA Belgium Danish France German y Italian Portuguese S panish Swedish Switzerland UK Latin American Jap anese 00 01 02 03 04 05 06 07 08 09 10 1 1 12 Keyboar d speed 0-8 0 : high cloc k rate 8 : low cloc k rate 00-08 03 Function key Disable Enable 00 01 Numeric key Alphabetic key Numeric key pa d (Num lock ...
12 Keyboard wedge Cap s Lock : By select ing C aps loc k”ON” or Caps lock”O FF” , scanner can ge t Cap s Lock s tatus. Power-on si m ulation: All of the P Cs check the keyboar d status during powe r-on selftes t. It i s recommen ded to Enable function i f you are workin g withou t keyboard installation . It simulates keyboard timing and p a ...
13 Exit Option Bar Code Option Alphanumeric Entry Caps lo c k Cap s lock”ON” Cap s lock”OFF” 00 01 Power-o n simulation Disable Enable 00 01 Inter-charac ter delay 00-99 msec 00-99 02 Block transmi ssion delay 00-99 10 msec 00-99 10 Program ...
14 RS-232 CTS: Clear T o Send (Hardw are Signal) RTS: Reque st T o Send ( Hardware Signal) Xon: Tran s mit On (A SCII Code 1 1 16 ) Xoff: Tran smit Of f ( ASCII Code13 16 ) Flow contro l: None- The com munication only u ses TxD an d RxD signals without regar d for any ha rdware or softwa re handsha k ing protocol. RTS/CTS- I f the scanner wa nt s t ...
15 Exit Option Bar Code Option Alphanumeric Entry Flow control None R TS/CTS Xon/Xof f ACK/NAK 00 01 02 03 Inter-charac ter delay 00-99 (msec) 00-99 00 Block transmi ssion delay 00-99 (10 msec) 00-99 00 Response delay 00-99 (100 msec) 00-99 20 Program ...
16 Exit Option Bar Code Option Alphanumeric Entry Baud rate 300 BPS 600 BPS 1200 BPS 2400 BPS 4800 BPS 9600 BPS 19200 BPS 38400 BPS 00 01 02 03 04 05 06 07 Parity None Odd Even 00 01 02 Data bi t 8 bit s 7 bit s 00 01 S top bit One bit T wo bi ts 00 01 Program ...
17 Pin Assignment s Keyboard Wed ge Connec tor (T o Host S ide): Pin Mini-DI N 6P M ale Mini-DI N 6P Female 1 DA T A / PC CLK / KB 2 NC GND 3 GND DA T A / KB 4 VCC (+5V) VCC (+5V) 5 CLK / PC NC 6 NC NA RS-232 DB-9F Connector (T o Hos t Sid e) : Pin Defin ition 1 NC 2 TXD 3 RXD 4 NC 5 GND 6 NC 7 CTS 8 RTS 9 VCC (+5V) 4 2 3 1 8 6 9 7 5 3 1 2 4 5 3 4 ...
18 Indication Power on a lert: Af ter power-o n the scanne r it will gen erate an alert signa l to indica te a su cc e ssful self-te st. LED indicat ion: Af ter ea ch success ful reading, the LED above the scanner will light up to i ndicate a good bar code reading . Beeper indicat ion: Af ter ea ch succes sful readin g, the scanner will beep bu z z ...
19 Exit Option Bar Code Option Alphanumeric Entry Power on alert Disable Enable 00 01 LED indi cation Disable Enable 00 01 Beeper indica tion Disable Enable 00 01 Beep loudnes s 00-07 00 -07 07 Beep tone freq. 00-99 (100Hz) 00-99 27 Beep tone dura tion 00-99 (10 msec) 00-99 10 Program ...
20 T ransmis sion Preamble trans m ission : By setti ng Enable , Preamble will be appen ded before the da ta transmitted . Post amble transm ission : By setting En able , Postamb le will be appen ded after the dat a is tran s mitted. Insert dat a group 1-4 pos ition: The scanne r of fers 4 positions to in sert among the sym bol. The position defaul ...
21 Exit Insert data g roup 1 position 00-63 (00: no inser tion) 00-63 00 Insert data g roup 2 position 00-63 (00: no inser tion) 00-63 00 Insert data g roup 3 position 00-63 (00: no inser tion) 00-63 00 Insert data g roup 4 position 00-63 (00: no inser tion) 00-63 00 Code ID pos ition Before code data After code dat a 00 01 ...
22 T ransmis sion Code ID tra nsmission: If your ap plication i s needed to transmit Code ID, you mu st set thi s to Pro prietar y ID or AIM ID. Code length tra nsmiss ion: A numb er of dat a digit s can be transmitted before the code data when Enable is sele cted. The tot al length of the b arcode i s the number of barcode da ta except Trun cate L ...
23 Exit Code length transmission Disable Enable 00 01 Code name transmission Disable Enable 00 01 Case conversio n Disable Upper case Low er case *For bar code dat a only 00 01 02 Format of barc o de dat a transmi ssion: Prefix Name Preamble ID Code Leng th Ba rc ode data ID Po stamble Su ffix Insert groups ...
24 Scan Scanning mo de: Good-read off- The trigger button mu st be pressed to activate scanning . T he light source of scanner s tops scanning when there i s a success ful read ing or no code is decoded af ter the S tand-by duration elap sed. Moment ary- The trig ger b utton act s as a switch. Press button to activate s canning and relea se bu tton ...
25 Exit Scanning mode Good-r ead off Mo mentary Alternate T im eou t of f Continue T est only 00 01 02 03 04 05 S tand-b y duration 01-99 (second) 01-99 06 Double read timeout 01-99 (10 msec) 01-99 50 Double confir m 00-99 (00: no double confirm) 00-09 00 Supplement Check Counter 00-40 00-40 20 ...
26 Scan Global min./ max. code length : Global Minimum and Ma ximum length can be set to qua l ify data entry . The length is defined a s the ac tual barcode data leng th to be sen t. Labe l with length ex ceeds the se limits will be re jected. Ma ke sure that the Minimu m length s etting is n o greater than the Ma ximum length setting, or otherw i ...
27 Exit Option Bar Code Option Alphanumeric Entry Global min. code length 00-64 00-64 04 Global max. code length 00-64 00-64 63 Inverted image scan Disable Enable 00 01 CTS trigger Disable Enable 00 01 *7A L* S tand mode selection LED ‘’on’ ’ LED ‘’of f ’ ’ 00 01 Program ...
28 ...
29 Exit S tring Setting Prefix character s : Up to 22 AS CII character s may be sent before dat a digi ts. Prefix Data Digit s Suf fix Suffix character s: Up to 22 ASCII characters may be sen t after dat a digits. Option Bar Code Option Alphanumeric Entry Prefix chara cters setting None 1-22 character s 00 00-f fH ASCII code Suf fix chara cters ...
30 S tring Setting Preamble/ P ost amble character s : They are ap pended to the data au t oma tically when each b arcode is decoded . Example: Add a p refix/suf fix or pr eamble/po stamb le for all symbologie s . In th is exa mple, y ou are se nding a $ symbol a s a prefix for all symbologies. S tep s: 1) S can Program ming an d Prefix characters ...
31 Exit Option Bar Code Option A l phanumeric Entry Preamble characters None 1-22 characters ‘PREAMBLE’ 00-f fH AS CII code Postamb le characters None 1-22 characters ‘POST A MBL E’ 00-f fH AS CII code Insert G1 chara cters None 1-22 characters ‘GROUP1’ 00-f fH AS CII code Insert G2 chara cters None 1-22 characters ‘GROUP2 ...
32 UPCA Read: Format Leading Zero Data Digit s (1 1 D igit s) Check Digit Check-su m transmiss ion: By setting Enable , che cks sum will be transmit ted. T runcate leading /ending: The le ading or ending digit s of barcode d ata characters can be trun cated when the se values are set to no n-zero. It will beep in stead of reading any thing when the ...
33 Exit Check-sum transmission Disable Enable 00 01 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00- ffH ASCII code 00-f fH < A > Insert group selection 00-44 00-44 00 ...
34 UPCA Supplement d igit s: The Supple men t digits bar code is the supplementa l 2 or 5 character s for WPC code. Format Leading Zero Data Digit s (1 1 D igit s) Check Digit Supplement Digits 2 or 5 or UCC / EAN 128 T runcation / Exp a ns ion: The leading “0” digit s of UPCA dat a characters can be trun cated when en abled. Supplement Che ...
35 Exit T runcatio n/ Exp ansion None T runcate leading zero Exp and to EAN13 00 01 02 Supplement Check Counter 20 The ...
36 UPCE Read: Format Leading Zero Data Digit s (6 Digits) Check Digits Check-su m verification : T he che cksum of EA N-13 is optional and made as the sum of the nume rical value of the dat a digits. Check-su m transmiss ion: By setting Enable , che cks sum will be transmit ted. T runcate leading /ending: Refer to Trun cate leading/ ...
37 Exit T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < E > ...
38 UPCE Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Supplement d igit s: Format Leading Zero Data Digit s (6 Digit s) Check Digit Supplement Digit s 2 or 5 or UCC/EAN 128 Exp ansio n: The ex p ansion functi on is used only for UP C E and EA N-8 cod e read ing. It extends to 13 -digit s with “0” digi ...
39 Exit Supplement digit s None 2 digit s 5 digit s 2,5 digit s UCC/EAN 128 2, UCC/EA N 128 5, UCC/EA N 128 All 00 01 02 03 04 05 06 07 T runcatio n/Exp an sion None T runcate leading zero Exp and to EAN13 Exp and to U PCA 00 01 02 03 Exp ansion Disable Enable 00 01 *OAM* UPCE-1 Disable Enable 00 01 Supplement Check Counter 20 ...
40 EAN-13 Read: Format Data Digit s (12 Dig its) Check Digit s Check-su m verification : The che cksum of EAN-13 i s optional and made as the sum of the nume rical value of the dat a digits. Check-su m transmiss ion: By setting Enable , che cks sum will be transmit ted. T runcate leading /ending: Refer to Trun cate leading/end ing o ...
41 Exit T runcate ending 0-15 00-15 00 ...
42 EAN-13 Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Supplement d igit s: Format Data Digit s (12 Digit s) Check Digits Supplement Digits 2 or 5 or UCC / EAN 128 ISBN/ISS N: The I SB N ( Internationa l S tandard Book N umb er) and ISS N (International S tandard Ser ...
43 Exit Code ID setting 00-f fH ASCII code 00-f fH < F > Insert group selection 00-44 00-44 00 Supplement digit s None 2 digit s 5 digit s 2,5 digit s UCC/EAN 128 2, U CC/ E AN 128 5, U CC/ E AN 128 All 00 01 02 03 04 05 06 07 ISBN/ISSN conversion Disable Enable 00 01 Supplement Check Counter 20 ...
44 EAN-8 Read: Format Data Digit s (7 Digits) Check Digits Check-su m verification : The che cksum of EAN-8 i s optional and made as the sum of the nume rical value of the dat a digits. Check-su m transmiss ion: By setting Enable , che cks sum will be transmit ted. T runcate leading /ending: Refer to Trun cate leading/end ing of UPC ...
45 Exit T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting T wo chara cters 00-f fH ASCII code 00-f fH, 00-f fH < FF > Insert group selection 00-44 00-44 00 ...
46 EAN-8 Supplement d igit s: Format Data D igit s (7 Digits) Check Digits Supplement D igits 2 or 5 or UCC/EAN 128 T runcation / Exp a ns ion: Refer to Truncate Leadin g zero of UPCE. Exp ansio n: Refer to Exp ansion of UPCE. Supplement Check Co unter: It w ill be more reliable to read the barcode wi th extension (suppl ement) li ke UPCE/A or EAN- ...
47 Exit T runcatio n / Exp ansion Disable Enable 00 01 T runcatio n / Exp ansion None T runcate leading zero Exp and to EAN13 00 01 02 Exp ansion Disable Enable 00 01 ...
48 Code 39 Read: Format S tart “ ” Data Digit s ( V ariable) Checksum (Optional) End “ ” Check-su m verification : The che cksum of Code-39 is optional and made as the sum mo d ule 43 of the numer ical value of the d ata d igit s. Check-su m transmiss ion: By setting Enable , che cksum will be transmit ted. Max./Min. code len gth: E ...
49 Exit Check-sum verification Disable Enable 00 01 Check-sum transmission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 01 T runcate leading 0-20 00-20 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < > ...
50 Code 39 Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Format: Th e F ull AS CII Code-39 is an enhan ce d set of Code-39 tha t is the data wi th tot al of 128 char acters to repr esent F ull ASCII code. It is comb ined one of the digit s +, %, $ and/ with one of the alpha dig its ( A to Z) . A ppend: Th ...
51 Exit Format S tanda rd Full ASCII 00 01 Append Disable Enable 00 01 S tart/en d transmission Disable Enable 00 01 ...
52 Inter leav e d 2 of 5 Read: Format Data Digit s (V ariable) Checksum (Optional) Check-su m v erification: Th e c he cksum i s made a s the s um module 10 o f the numeri cal value s of all data digits . Check-su m transmiss ion: By setting Enable , che cksum will be transmit ted. Max./Min. c ode length : Refer to M ax./Min. code length o f Code-3 ...
53 Exit Check-sum transmission Disable Enable 00 01 Max. code leading 00-64 00-64 00 Min. code lea ding 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < i > Insert group selection 00-44 00-44 00 ...
54 Industrial 2 of 5 Read: Format Data Digit s (V ariable) Checksum (Optional) Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Op ...
55 Exit T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < i > Insert group selection 00-44 00-44 00 ...
56 Matrix 2 o f 5 E ur Read: Format Data Digit s (V ariable) Checksum (Optional) Checksum V erificati on: The che cksum is ma de as the sum module 10 o f the numeri cal value s of all data digits . Checksum T ransmission: By setting Enable , che c ksum will be transmit ted. Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T ...
57 Exit Checksum T ransmission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < B > Insert group selection 00-44 00- 44 00 ...
58 Codabar Read: Format Checksum V erificati on: The che cksum is ma de as the sum module 16 o f the numeri cal value s of all data digits . Checksum T ransmission: By setting Enable , che c ksum will be transmit ted. Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing ...
59 Exit Checksum T ransmission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < % > ...
60 Exit Codabar Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. St art/End ty pe: The Coda bar has four p airs of S tart/End pa ttern; you may select one p air to match you r applicatio n. St art/End T r ansmiss ion : Refer to S tart/End Tr an smission of Code 39. Option Bar Code Option Alphanumeric Entry Insert group sele ...
61 Exit Code-128 Read: Format Data Digit s (V ariable) Checksum (Optional) Checksum V erificati on: The che cksum is ma de as the sum module 103 of all data dig its. Checksum T ransmission: By setting Enable , che c ksum will be transmit ted. Option Bar Code Option Alphanumeric Entry Read Disable Enable 00 01 Checksum V erifica tion Disable Ena ...
62 Code-128 Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Format: Th e Code-128 can be tran slated to UCC/EAN-128 format if it ...
63 Exit T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < # > Insert group selection 00-44 00-44 00 Format S tanda rd UCC/EAN-1 28 00 01 ...
64 Exit Code-128 A ppend: When the func tion is en abled, it won' t show the dat a immediately if scanner read the bar code includes FNC2 code. It will show all da ta unti l it rea d the barcode , which doesn' t have FNC2 code. UCC/ EAN 128 ID settin g: T o sett in g the code ID for UCC/EAN-128 outpu t format. Field sep arator code : T h ...
65 Exit Code-93 Read: Format Data D igit s (V ariable) Checksum1 (Optiona l) Checksum2 (Optional) Checksum V erificati on: The che cksum is ma de as the sum module 47 o f the numeri cal value s of all data digits . Checksum T ransmis sion: By set ting Enable , checksum will be transmit ted. Option Bar Code Option Alphanumeric Entry Read Disable Ena ...
66 Code-93 Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Option Bar Code Option Alphanumeric Entry Max. code length 00-64 00-64 ...
67 Exit Code ID setting 00-f fH ASCII code 00-f fH < & > Insert group selection 00-44 00-44 00 ...
68 Code-1 1 Read: Format Data D igit s (V ariable) Checksum1 (Optiona l) Checksum2 (Optional) Checksum V erificati on: The che cksum is presen ted a s the sum module 1 1 of all da ta digits . Checksum T ransmis sion: By set ting Enable , checksum1 and checksum2 will be trans mitted upon your selected checksum verif ication me thod. Max./Min. c ode ...
69 Exit Checksum T ransmission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < O > Insert group selection 00-44 00-44 00 ...
70 MSI/Plesse y Read: Format Data D igit s (V ariable) Checksum1 (Optiona l) Checksum2 (Optional) Checksum V erificati on: The MSI /Plessey has one or two optional checksum digit s. The checksum is presen ted 3 kinds of me thod Mod10 , Mod10/10 and Mod 1 1/10 . The checksum1 and checksum2 will b e calculated a s the su m module 10 or 1 1 of the da ...
71 Exit Checksum T rans mission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < @ > Insert group selection 00-44 00-44 00 ...
72 UK/Plessey Read: Format Data Digit s (V ariable) Checksum1+2 (Optional) Checksum V erificati on: The UK/Ples sey has one or two optional checksum digit s. The che c ksum1 an d check sum2 will be calculated as the sum mod ule 10 or 1 1 of the data digits. Checksum T ransmission: By setting Enable , che c ksum will be transmit ted. Max./Min. c ode ...
73 Exit Checksum T rans mission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < @ > Insert group selection 00-44 00-44 00 ...
74 T ele p en Read: IA T A (Interna tional A ir T ra nsport Association) . Checksum V erificati on: The che cksum is presen ted a s the sum module 10 or 1 1 of the dat a digit s. Checksum T ransmission: By setting Enable , che c ksum will be transmit ted. Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /endin ...
75 Exit Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < S > Insert group selection 00-44 00-44 00 ? ...
76 S t andar d 2 of 5 Read: Format Data Digit s (V ariable) Checksum1 (Optional) Check-su m v erification: Th e c he cksum i s made a s the s um module 10 o f the numeri cal value s of all data digits . Check-su m transmiss ion: By setting Enable , che cksum will be transmit ted. Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. ...
77 Exit *JAC* Check-sum transmission Disable Enable 00 01 Max. code length 00-64 00-64 00 Min. code len gth 00-64 00-64 00 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < i > Insert group selection 00-44 00-44 00 ...
78 GS1 Dat aBar Omnidirectional Read: Format Data Digit s (V ariable) Checksum1 (Optional) T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. UCC/EA N 128 emulat ion: Refer to T ran smission, Code ID tr ...
79 Exit Code ID setting Insert group selection 00-44 00-44 00 UCC/EAN128 emulation Disable Enable 00 01 ...
80 GS1 Dat aBar Limited Read: Format Data Digit s (V ariable) Checksum1 (Optional) T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. UCC/EA N 128 emulatio n: Re fer t o U CC/EAN 128 e mulation of GS1 D ...
81 Exit Code ID setting 00-f fH ASCII code 00-f fH < RL > Insert group selection 00-44 00-44 00 UCC/EAN128 emulation Disable Enable 00 01 ...
82 GS1 Dat aBar Exp anded Read: Format Data Digit s (V ariable) Checksum1 (Optional) Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UP ...
83 Exit Min. code len gth 00-99 00-99 01 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < RX > Insert group selection 00-44 00-44 00 UCC/EAN128 emulation Disable Enable 00 01 ...
84 China Post Read: Format Data Digit s (V ariable) Checksum1 (Optional) Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA. Option B ...
85 Exit T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 00-f fH < t > Insert group selection 00-44 01-44 00 ...
86 It alia n Pharmacode Read: Format Data Digit s (V ariable) Checksum1 (Optional) Max./Min. c ode length : Refer to M ax./Min. code length o f Code-39. T runcate leading /ending: Refer to Trun cate leading/end ing of UPCA. Code Id setting : Refer to C ode ID setting of UPCA . Insertion gr oup select ion: Refer to Insertion gr oup selection of UPCA ...
87 Exit Min. code len gth 00-64 00-64 09 T runcate leading 0-15 00-15 00 T runcate ending 0-15 00-15 00 Code ID setting 00-f fH ASCII code 01-f fH < p > Insert group selection 00-44 00-44 00 Leading “A” Disable Enable 00 01 ...
88 CODABAR-P ARA CODE-1 1 P A RA CODE-128 P ARA CODE-39 P ARA CODE-93 P ARA EAN-13 P ARA ...
89 ST ANDRA D-25 P ARA EAN-8 P ARA INDUSTRIAL- 25 P ARA UPCE P ARA INTERLEA VED-25 P ARA ...
90 MA TRIX 2 5 P ARA MSI/PLESSE Y P ARA UPCA P ARA UK/PLESSE Y P ARA GS1 DA T ABAR OM NIDIRECTIO NAL ...
91 A SC II C ode T a ble ﹛ ﹜ ...
92 Para meter Setting List Program Barcode st andard p arameter set ting list If you wish to display the current configura tion of your AS-8000 scanner over the host ter m inal/compu ter , scan the Barcode standard p arameter setti ng list bar code. Unique p arameter list If you wish to display the unique p arameter setting li st, scan the unique p ...
93 Exit Firmware v ersion list If you wish to display the firmware version, scan the Firmware v ersion list. W ARNI NG: Default value initializa tion If you wish to return the AS -8000 scanne r to all the fa ctory default setting s, scan the De f ault v alue in itiali zation b ar c ode. ...
Argox AS-8000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- AS-8000の取扱説明書
- Argoxの製品カード
- パンフレット
- またはArgox AS-8000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Argox AS-8000の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Argox AS-8000の取り付け説明書、サービスマニュアル、簡易説明書、またはArgox AS-8000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Argox AS-8000の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Argox AS-8000デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがArgox AS-8000を使用するのを助ける技術的文書のことです。説明書は通常、全てのArgox AS-8000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Argoxの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Argox AS-8000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははArgox AS-8000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Argox AS-8000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Argox AS-8000デバイスの基本機能を使うにあたってのヒント。 Argox AS-8000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Argox AS-8000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるArgox AS-8000のメーカー/サービスへの連絡先に関する情報。
Argox AS-8000についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもArgox AS-8000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがArgox AS-8000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。