日本語 dropdown-ico

Allen & Heath dLive S5000の取扱説明書

20ページ 関係なし
ダウンロード

ページに移動 of 20

Summary
  • Allen & Heath dLive S5000 - page 1

    Surface Getting Started Guide S3000, S5 000, S7000  Before starting please check www.allen-heath.com for the latest dLive firmware and documentation. AP 9 899 ...

  • Allen & Heath dLive S5000 - page 2

    Surface Getting Started Guide 2 AP 9899 Issue 1 dLive products comply with t he European Electromagnetic Compatibility directive 2004/108/EC and the European Low V oltage di rective 2006/95/EC. Any changes or modifications to the p roduct not approved by Al len & Heath could void the compliance of the p roduct a nd th erefore the u ser’s auth ...

  • Allen & Heath dLive S5000 - page 3

    Surface Getting Started Guide 3 AP 9899 Issue 1 IMPORT ANT - Read b efore starting Safety instructions Before starting, read the Important Safety Instructions printed on the sheet supplied with the equipment. For your own safety and that of the opera tor, technical crew a nd performers, follow a ll instructions a nd heed all warnings printed on the ...

  • Allen & Heath dLive S5000 - page 4

    Surface Getting Started Guide 4 AP 9899 Issue 1 P acked items Check you have received the following:  dLive Surface  Getting Started Guide AP9899  Safety Sheet  IEC mains lead  Dust cover Contents IMPORTANT - Read before starting ......................................................................................................... ...

  • Allen & Heath dLive S5000 - page 5

    Surface Getting Started Guide 5 AP 9899 Issue 1 1. Introduction dLive is a distributed digi tal mixing system providing a uniquely flexible solution for any live sou nd application. It se parates the mi x engine from the control sur face, putting the audio and proc essing where it is needed, and offering a host of control and audio networking poss ...

  • Allen & Heath dLive S5000 - page 6

    Surface Getting Started Guide 6 AP 9899 Issue 1 S3000 20 faders, 6 layers = 120 strips Single screen S5000 28 faders, 6 layers = 168 strips Twin screen S7000 36 faders, 6 layers = 216 strips Twin screen ...

  • Allen & Heath dLive S5000 - page 7

    Surface Getting Started Guide 7 AP 9899 Issue 1 2. Rear P anel Mic/Line inputs – 8x recallable preamps for balanced or unbalan ced microphone and lin e level signals. Gain, Pad and 48V are d igitall y controlled within the preamp. The PP indicator lights up when phantom power voltage i s d etected at the socket, whether internally or externally s ...

  • Allen & Heath dLive S5000 - page 8

    Surface Getting Started Guide 8 AP 9899 Issue 1 Kensington Lock - A slo t for fitting st andard Kensington anti-theft security devices. Power Supply – Hot swappable power supply wi th mains IEC socket and On/Off rocker switch . To rem ove or replace, loosen the 4 screws indicated bel ow and slide the PSU out of the slot.  dLive Surfaces ship w ...

  • Allen & Heath dLive S5000 - page 9

    Surface Getting Started Guide 9 AP 9899 Issue 1 DX links – Dual redundant EtherCon port for connection of a DX exp ander over Fast Ethernet (IEEE 802.3 Layer 2 compliant). A single Cat5e (or higher) cable carries 32x32 channels of 96kHz audio and control. Use two cables for redundancy. Use the I/O screen to patch signals from or to the DX expan d ...

  • Allen & Heath dLive S5000 - page 10

    Surface Getting Started Guide 10 AP 9899 Issue 1 3. Front P anel Channel Processing – Press a fader strip Sel key to access the processing for the input or mix channel a ssigned to it. Read the Harmon y UI paragraph below for further information. Touchscreen – Single or twin 12” capacitive touchscreen with gesture control and daylight v isibi ...

  • Allen & Heath dLive S5000 - page 11

    Surface Getting Started Guide 11 AP 9899 Issue 1 SoftKeys – 26 u ser assignable keys. Assign functions using the Surface / Control / SoftKeys screen. Talkback – Press to Talk latching or momentary ke y and Talk Active indicator. Hold down Assign and press any master Mix key to assign. Home – Press to restore a familiar state of the Surface. H ...

  • Allen & Heath dLive S5000 - page 12

    Surface Getting Started Guide 12 AP 9899 Issue 1 Fader Strips – Provide control o f Input channels, FX returns, Mix masters, DCAs, engineer’s Wedge / IEM monitor, or MIDI. Read the Fader Strip paragraph below for further information. The strip layout is user assignable and stored in Scenes. Use the Surface / Control / Strip Assign screen to edi ...

  • Allen & Heath dLive S5000 - page 13

    Surface Getting Started Guide 13 AP 9899 Issue 1 Preamp – Peak indicator and dedicated preamp controls for analogue Gain, Digital Trim, 48V, Pad and polarity. Filters – HPF and LPF Frequency and In switch. Inser t – Insert In swi tch and Assigned indicator. The indicator is lit when any of the channel Insert points is assigned. Lib – Press ...

  • Allen & Heath dLive S5000 - page 14

    Surface Getting Started Guide 14 AP 9899 Issue 1 Left widget area – Can be configured for different functions, for example as a scrollable Scenes list. Hold down Setup and touch this area to configure. On the S3000 this area is dedicated to the channel processing. Bottom widget area – Can be con figured for different functions, for example as a ...

  • Allen & Heath dLive S5000 - page 15

    Surface Getting Started Guide 15 AP 9899 Issue 1 Aux PRE NAM E IP St DCA 3.3 Fader strip Meter – 22 -segment signal meter and 6 -segment gain reduction meter. The meter displays audio signal activity for the channel. The red peak ind icator lights to warn that the signal is within 5dB of clipping. It is multi- point sensing w hich mea ns it detec ...

  • Allen & Heath dLive S5000 - page 16

    Surface Getting Started Guide 16 AP 9899 Issue 1 3.4 Working with the Mix Press a Main Mix master strip Mix key. This is the normal mixing mode. The Input strips present the channel faders. The Master strips present the master mix faders. Hold down the Assign key and press channel Mix keys to assign or unassign them from the main mix. Current ON st ...

  • Allen & Heath dLive S5000 - page 17

    Surface Getting Started Guide 17 AP 9899 Issue 1 4. Connect and po wer up 4.1 MixRack connection Plug a touring g rade C AT5e (or hi gher spec ification) c able u p to 100m long between the dLive Surface and MixRack gigaACE ports. Use two cables for redundancy.  Refer to www.allen-heath.com for cable requirements, recommendations, and a list of ...

  • Allen & Heath dLive S5000 - page 18

    Surface Getting Started Guide 18 AP 9899 Issue 1 4.4 Connect a laptop or wireless router Connect a laptop, router o r ac cess point to e i ther of the Network ports to use w ith dLive E ditor or iOS apps. Read the Release Notes and Help Files accompanying the software or apps for further inf ormation.  dLive communicates over TCP/IP. All devices ...

  • Allen & Heath dLive S5000 - page 19

    Surface Getting Started Guide 19 AP 9899 Issue 1 5. Dimensions C S3000 - 624.5mm/24.6" S5000 - 870mm/34.3" S7000 - 1080mm/42.5" 113.1mm/4.5" 352.9mm/13.9" A S3000 - 870mm/34.2" S5000 - 1115.4mm/43.9" S7000 - 1325.4mm/52.2" B S3000 - 744.5mm/29.3" S5000 - 990mm/39" S7000 - 1200mm/47.3" 477.1mm/1 ...

  • Allen & Heath dLive S5000 - page 20

    Surface Getting Started Guide 20 AP 9899 Issue 1 6. T echnical specs Inputs System Mic/Line XLR In puts Balanced XLR, +48V phantom power Measured balanced XLR in to XLR out, 20-20kHz, minimum Gai n, Pad out Mic/Line Preamp Fully recallable Dynamic Range 110 dB Input Sensitivit y -60 to +15dBu System Signal to Noise - 92 dB Analogue Gain +5 to +60dB ...

メーカー Allen & Heath カテゴリー Mixer

Allen & Heath dLive S5000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- dLive S5000の取扱説明書
- Allen & Heathの製品カード
- パンフレット
- またはAllen & Heath dLive S5000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Allen & Heath dLive S5000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Allen & Heath dLive S5000の取り付け説明書、サービスマニュアル、簡易説明書、またはAllen & Heath dLive S5000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Allen & Heath dLive S5000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Allen & Heath dLive S5000デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAllen & Heath dLive S5000を使用するのを助ける技術的文書のことです。説明書は通常、全てのAllen & Heath dLive S5000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Allen & Heathの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Allen & Heath dLive S5000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAllen & Heath dLive S5000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Allen & Heath dLive S5000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Allen & Heath dLive S5000デバイスの基本機能を使うにあたってのヒント。 Allen & Heath dLive S5000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Allen & Heath dLive S5000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAllen & Heath dLive S5000のメーカー/サービスへの連絡先に関する情報。

Allen & Heath dLive S5000についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもAllen & Heath dLive S5000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAllen & Heath dLive S5000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)