English dropdown-ico

Manual Epson Professional Series II

63 pages 0.57 mb
Download

Go to site of 63

Summary
  • Epson Professional Series II - page 1

    USER'S GUIDE ...

  • Epson Professional Series II - page 2

    ...

  • Epson Professional Series II - page 3

    EPSON ® Professional Series II 20” Monitor User’s Guide ...

  • Epson Professional Series II - page 4

    Y73599I00500 ...

  • Epson Professional Series II - page 5

    Important Safety Instructions Read all of these instructions and save them for later reference. Never push objects of any kind into the monitor through cabinet slots. Do not expose the monitor to liquids, such as rain or spills. Because of the monitor’s weight, two people are required to lift it; do not lift it alone. Do not place the monitor on ...

  • Epson Professional Series II - page 6

    16. Excessive brightness for long periods may permanently imprint an image on the screen. 17. To avoid picture distortion or color disturbance, do not put devices that generate magnetism (such as telephones, televisions, speakers, or magnetic screwdrivers) near the monitor. 18. When you finish using the monitor, turn it off by pressing the power bu ...

  • Epson Professional Series II - page 7

    Contents Introduction ............................. 1 Where to Get Help ....................... 3 Unpacking the Monitor ....................... 4 Setting Up the Monitor ....................... 5 Connecting the Monitor to Your Computer ......... 6 Connecting Two or More Monitors to One Video Controller .................... 10 Turning On the Monitor ...

  • Epson Professional Series II - page 8

    There are colored spots on the screen or the image is distorted ........................... 41 One or two colors are missing .................. 42 You connected two or more monitors to one video controller and the image quality is poor .......... 42 Additional error messages .................... 43 Factory-set Video Modes ....................... 44 ...

  • Epson Professional Series II - page 9

    Introduction Your Epson ® Professional Series II monitor is a high- performance, multifrequency, autoscan color monitor for use with graphic video controllers. The monitor is ideal for applications that require a large screen size and high resolution, such as CAD/CAM/CAE and desktop publishing. It offers the following features: U 20-inch Trinitron ...

  • Epson Professional Series II - page 10

    ‘A Compliance with the latest Swedish magnetic emissions guidelines (MPR-2, VLF/ELF) IU Anti-glare HEA panel -I Tilt and swivel base il One 15-pin, D-Sub miniature, VGA connector and five BNC connectors, which provide a variety of video interface cable connection options and the possibility of connecting two or more monitors to one video controll ...

  • Epson Professional Series II - page 11

    Where to Get Help If you purchased your monitor in the United States, Epson America provides local customer support and service through a nationwide network of authorized Epson dealers and Service Centers. Epson also provides the following support services through the Epson Customer Support Center at (800) 922-8911: J Technical assistance with the ...

  • Epson Professional Series II - page 12

    Unpacking the Monitor When you unpack your monitor, make sure you have the items shown below. WARNING Because the monitor weighs approximately 81 lbs, two people are needed to lift it. To avoid injury, do not lift the monitor alone. Place the monitor only on a strong table or desk; do not place it on your computer. monitor video interface cable AC ...

  • Epson Professional Series II - page 13

    Note Be sure to keep the monitor’s original box and packing materials in case you need to transport the monitor later. Setting Up the Monitor When you select a location for the monitor, keep the following in mind: ‘9 Follow the safety instructions listed at the beginning of this manual. J Use one or more sturdy desks that are strong enough to s ...

  • Epson Professional Series II - page 14

    Alternatively, you can purchase your own video interface cable and connect it to the monitor’s BNC connectors. See the BNC connector signals table on page 54 to determine which video interface cable(s) and BNC connectors to use with your system. If your computer or video adapter card does not have a VGA connector, you cannot use the video interfa ...

  • Epson Professional Series II - page 15

    2. power button Turn the monitor around so you can see the back panel. VGA connector BNC CO n vents nectors / AC power high impedance/ 75 Ohm switch inlet Professional Series II Monitor 7 ...

  • Epson Professional Series II - page 16

    Note If you are connecting only one monitor to the video interface, make sure the HIGH/75SZ switch is set to 75Q (the factory setting). As long as you use only one monitor with your computer’s video controller, do not set the HIGHi75Q switch to HIGH because this causes excessive brightness and lowers the resolution. 3. Plug one end of the video i ...

  • Epson Professional Series II - page 17

    to an IT power system with 6. Turn the monitor around so the screen faces you and use the tilt and swivel base to position the screen at a good viewing angle. For comfortable viewing, the top of the screen should be slightly below eye level when you are sitting in front of the monitor. (Your line of sight to the screen should be about 10° to 20° ...

  • Epson Professional Series II - page 18

    Connecting Two of More Monitors to One Video Controller Using the monitor’s BNC connectors, you can connect two or more monitors to a single video controller for demonstrations and other applications. To connect two or more monitors to one video controller, you need the following: #-I One video interface cable with a VGA connector on one end and ...

  • Epson Professional Series II - page 19

    To connect two monitors to the video interface on your computer, follow the steps below. If you want to connect three monitors to the video interface, you can follow these steps, but first see “Connecting three monitors” on page 15. 1. Make sure your monitors, the computer, and all other peripheral devices are turned off. 2. If one monitor is a ...

  • Epson Professional Series II - page 20

    4. Using the same method as described in step 3, connect each of the five color-coded cables to the appropriate T connector on the first monitor, as shown below. The table following the illustration shows how to match each color- coded cable with the appropriate T connector. red cable I connector Connecting the co/or-coded cables Cable Connect cabl ...

  • Epson Professional Series II - page 21

    5. Plug the VGA connector on the color-coded video cable into the computer’s VGA interface and tighten the connector screws. 6. Connect one 75Q video interface cable to each T connector on the first monitor, as shown below. de0 T connector ce cable 7. Then connect each 75Q video interface cable to the appropriate BNC connector on the second monit ...

  • Epson Professional Series II - page 22

    8. Set the first monitor’s HIGH/75Q switch to HIGH and the second monitor’s HIGHi75Q switch to 750, as shown below. --e- _--- ---- ---- ___- ---- ---- -s- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ;I _I --- i II -I--=- ---- _--- _--- ---- ___- -E-~ ~ --- --- --- --- --- --- -- --- --- --- i’ --II --- IEzz r~ I ---I 14 Pr ...

  • Epson Professional Series II - page 23

    To maximize the brightness of all the monitors you connect, always set the HIGHi75Q switches to HIGH on all the monitors except the last one and set the last monitor’s switch to 75R. For example, if you connect three monitors to one video controller, set the switches on the monitors as shown below. If one of the monitors you are connecting does n ...

  • Epson Professional Series II - page 24

    Turning On the Monitor Follow these steps to turn on your computer and monitor(s): 1. Turn on your computer. (If you turn on the monitor before the computer, the monitor’s LCD may display an error message until you turn on the computer.) 2. To turn on the monitor, press the power button on the left side of the control panel. The LCD first display ...

  • Epson Professional Series II - page 25

    If the monitor recognizes your computer’s video mode, the LCD displays Video Mode : n, where n is the number of current video mode. If the monitor does not recognize the current video mode, the LCD displays the message Mode not found. This means the display parameter settings for the current video mode have not been stored in the monitor’s memo ...

  • Epson Professional Series II - page 26

    The Control Panel The control panel buttons are shown below. The table after the illustration describes their functions. Function button Adjustment button If I Brightness button Degauss button / I I Memory select button Memory store button Memory recall button #I /’ Contrast button Input select button Control panel buttons 18 Professional Serie ...

  • Epson Professional Series II - page 27

    Control pane/ buttons (continued) The following sections provide detailed information on how to use the control panel buttons. Note While you are using the control panel buttons to adjust the image, the LCD display changes. If you do not press any buttons for 10 seconds, however, the LCD redisplays the number of the current video mode or Mode not f ...

  • Epson Professional Series II - page 28

    Setting the Type of Video lnput The Input select button allows you to change the monitor’s video input setting to match the type of video input the monitor is using. The monitor has two possible video input settings: D-SUB or BNC. If your video interface cable is connected to the monitor’s VGA connector, the video input setting should be D-SUB. ...

  • Epson Professional Series II - page 29

    Note If the LCD still flashes H/V SYNC OFF after you press INPUT SEL, see page 39 in “Troubleshooting.” Adjusting the Brightness and Contrast To make the image on the screen clear and easy-to-read, use the Brightness and Contrast buttons (shown below) to adjust and save the monitor’s brightness and contrast settings. The Brightness button con ...

  • Epson Professional Series II - page 30

    2. When you are satisfied with the brightness of the image, release the Brightness button. After 10 seconds, the LCD displays the number of the current video mode or Mode not found. If you do not touch any control panel buttons for 20 seconds, the monitor saves your brightness setting. Your setting remains in effect (even after you turn off the mon ...

  • Epson Professional Series II - page 31

    The monitor automatically selects which video mode to use. It analyzes the signal input (the frequency and polarity of the horizontal and vertical sync pulses) from the computer, checks the video modes stored in its memory, and uses the most appropriate mode. The signal input depends on the computer, display adapter card, and application program yo ...

  • Epson Professional Series II - page 32

    Display parameters (continued) Parameter w--p Vertical shift Height Function Centers the image vertically. Press and hold down the - side of the Adjustment button to move the image downward, or the + side to move the image upward l Adjusts the height of the image. Press and hold down the side of the Adjustment button to reduce the height of the ima ...

  • Epson Professional Series II - page 33

    Modifying a Video Mode When the monitor is using a factory-set or user-defined video mode, you can customize the screen image by adjusting the mode’s display parameter settings. When the LCD displays the number of the current video mode, follow the steps below to modify its display parameter settings. (If the LCD is off, press the Brightness or C ...

  • Epson Professional Series II - page 34

    Pressing FUNCT accesses the display parameters in the order listed in the table below. You can press MEM RCL to move backward through the parameters. Display parameter order /---- Parameter LCD message r--- Horizontal phase T- Hor Phase i"Yh ~ Width Vertical shift , Vert Shift Height ~ Vertical convergence l I-- Horizontal convergence l Change ...

  • Epson Professional Series II - page 35

    6. When you are finished adjusting the image, press MEM SEL. The LCD displays Mem Select : nt, where n is the number of the current video mode. (If you do not want to save your changes to the current video mode, press MEM SEL again. The LCD displays the number of the current video mode.) 7. To save your setting(s), press MEM STORE. The LCD displays ...

  • Epson Professional Series II - page 36

    1. Press MEM SEL. The LCD displays Mem Select : nt (where n is a number from 1 through 14 and indicates the current factory-set video mode). 2. Press MEM RCL. You see the message Recall Confirm ?. 3. To confirm that you want to recall the factory settings for the current video mode, press MEM RCL again. You briefly see the message Recall Update whi ...

  • Epson Professional Series II - page 37

    3. 4. 5 Pressing FUNCT accesses the display parameters in the order listed in the table below. You can press MEM RCL to move backward through the parameters. Display parameter order Parameter ~ LCD message 1 Horizontal phase ~ Hor Phase Width Width Vertical shift ! Vert Shift Height ~~ i------ ~~~ ~~ ------A~ Height Vertical convergence l Vert Conv ...

  • Epson Professional Series II - page 38

    6. When you are finished adjusting the image, press MEM SEL. The LCD displays Mem Select : n (where n is a number from 15 through 22 and represents the first available user-defined video mode). If no arrow appears after the user-defined video mode number, there is currently no display information for this mode stored in the monitor’s memory. Note ...

  • Epson Professional Series II - page 39

    Adjusting the Vertical and Horizontal Convergence You can adjust the monitor’s vertical and horizontal convergence to sharpen the screen image. Optimum convergence produces the highest resolution and occurs when the red, green, and blue beams overlap. Note Changes you make to the monitor’s vertical and horizontal convergence apply to all video ...

  • Epson Professional Series II - page 40

    If you press FUNCT when the LCD displays 5. To exit from this display, press 3. Using a horizontal green line as your reference, adjust the red and blue beams until the line is sharp, distinct, and completely white. To do this, press and hold down the - or + side of the Adjustment button to separate the red and blue beams or move them closer togeth ...

  • Epson Professional Series II - page 41

    5. Using a vertical green line as your reference, adjust the red and blue beams until the line is sharp, distinct, and completely white. To do this, press and hold down the - or + side of the Adjustment button to separate the red and blue beams or move them closer together, as shown in the table below. (The green beams remain in place.) A scale of ...

  • Epson Professional Series II - page 42

    Selecting the Color Temperature The color temperature of the image determines the mix of red, green, and blue and therefore the shade of white on the screen. If you want to change the shade of white, you can choose between two factory-set color temperatures or define your own color temperature as described on page 36. Of the factory-set color tempe ...

  • Epson Professional Series II - page 43

    Display parameter order c Parameter i Horizontal phase LCD message Width i Width Vertical shift Vertical shift r------ ~~ 1 Height ’ Vertical convergence ’ Vertical convergence Horizontal convergence Horizontal convergence Color temperature Color temperature I ~ Vert Shift Height I ~ Vert Shift Height vert Conv + ~ Horiz Conv 1 Color Temp i ~ H ...

  • Epson Professional Series II - page 44

    After 10 seconds, the LCD displays the number of the current video mode or Mode no t found. If you do not touch any control panel buttons for 30 seconds, the monitor saves your color temperature setting. Your setting remains in effect (even after you turn off the monitor) until you select another color temperature. Defining Your Own Color Temperatu ...

  • Epson Professional Series II - page 45

    6. When you are satisfied with the shade of white you see, do not touch any control panel buttons for at least 30 seconds. After 10 seconds, the LCD displays the number of the current video mode or Mode not found. After 30 seconds, the monitor saves the color temperature you defined as color temperature 3. 7. Press MEM SEL twice to exit from defini ...

  • Epson Professional Series II - page 46

    CIeaning the Monitor To keep the monitor operating at its best, it is important to clean it regularly. Follow these steps: 1. Turn off the monitor. 2. Use a damp, lint-free cloth to wipe the monitor cabinet; do not use a wet cloth. 3. To clean the screen, spray a household glass cleaner on a cloth; then wipe the screen. Troubleshooting This section ...

  • Epson Professional Series II - page 47

    The screen and the LCD do not come on. 1. The monitor’s power may not be on. Press the power button. The power is on when the button is pressed in. 2. Make sure the power cord is fully plugged into the AC inlet on the monitor’s back panel and the electrical outlet. 3. Check the operation of the electrical outlet by plugging in a lamp or other e ...

  • Epson Professional Series II - page 48

    5. Check if you need to set up your application program(s) to match your monitor. 6. Contact your dealer or service representative; the monitor needs repair. The screen is blank and the LCD does not display a SYNC O FF error message. 1. Adjust the brightness and contrast as described on page 21. 2. Contact your dealer or service representative; the ...

  • Epson Professional Series II - page 49

    The image is not centered on the screen. Adjust the horizontal phase and/or vertical shift settings as described in “Using Video Modes” on page 22. The image is too big or too small for the screen. Adjust the width and/or height settings as described in “Using Video Modes“ on page 22. The image is fuzzy. 1. Adjust the vertical and horizonta ...

  • Epson Professional Series II - page 50

    One of two colors are missing. 1. Make sure your video interface cable(s) are properly connected to the monitor connector(s). 2. Check your application program color settings. You connected two or more monitors to one video controller and the image quality is poor. 1. If you connected two monitors, set their HIGHi75Q switches according to step 8 on ...

  • Epson Professional Series II - page 51

    Additional error messages Error message displayed on LCD H OUT OF RANGE* V OUT OF RANGE* PLL UNLOCKED V DEF FAILURE H DEF FAILURE HI VOL FAILURE GEN FAILURE T- [ Description The horizontal input signals are out of range. I ~~ The vertical input signals are out of i range. There is a local failure in the vertical deflection. I ~- I There is a local ...

  • Epson Professional Series II - page 52

    Factory-set Video Modes The table below lists the parameter settings for the 14 factory-set video modes. Factory-set video modes VGA 1056x400 Parameter Unit 132 column Clock freq. MHz Horizontal freq. KHz Vertical freq. Hz - Horizontal Total Active Blanking Front porch Sync width Back porch psec wc .- pet pet psec psec 32.600 1304 31.778 800 26.400 ...

  • Epson Professional Series II - page 53

    factory-set video modes (continued) c c c c L I I L. I L i - Horizontal Total Active Blanking Front porch Sync width Back porch Vertical Total Active Blanking Front porch Sync width Back porch 1 Time I Pixels I Time 1 Pixels ~ Time I Pixels ’ psec 31.778 800 ~ psec 25.422 640 pet 6.356 160 ~~~ pet 1 0.636 16 Pet 3.813 96 Pet 1.907 48 I Time I Lin ...

  • Epson Professional Series II - page 54

    factory-set video modes (continued) I- ~ Parameter I ~~~~~ ~~~~~~~ ~ Clock freq. -- --f--~ 1024 x 768 65.0 Horizontal freq. ! KHz Horizontal Total Active Blanking Front porch Sync width Bock porch ---t 600 i 10.802 23 I 0.5631 / 0.577 z 0.600 -t- 1 29 46 Professional Series II Monitor ...

  • Epson Professional Series II - page 55

    Factory set video modes (continued) - Professional Series II Monitor 47 ...

  • Epson Professional Series II - page 56

    Factory-set video modes (continued) c t t Parameter 1 Unit 1 1280x1024 / 1280 x 1024 Clock freq. MHz 125.0 135.0 Horizontal freq. KHz 74.405 I 81.129 Vertical freq. Hz 70.062 76.109 Horizontal Total Time Pixels Time Pixels .- psec 13.440 1680 12.326 1664 -. Active Blanking --- Front porch c Sync width 1 psec 1 1.000 1 125 1 0.770 / 104 c t t Back p ...

  • Epson Professional Series II - page 57

    Specifications Trinitron CRT Size 20 inches (508 mm) diagonal, 19 V (visible phosphor) Pitch 0.31 mm Phosphor persistence Medium short Light transmission 39% Deflection angle 90° Anti-glare treatment HEA panel with antistatic coating Display Image size (landscape mode) 13.8 inches x 10.3 inches (350 mm x 263 mm) or 13.4 inches x 10.6 inches (342 m ...

  • Epson Professional Series II - page 58

    Interfacing Requirements Input signals Video input Horizontal frequency 0 to 0.714 V maximum 30 to 82 KHz; continuous range, autoscan Vertical frequency 50 to 160 Hz; continuous range, (refresh rate) autoscan Signal connectors One 15-pin, D-Sub miniature, VGA connector; five BNC connectors: V, H/(H+V), B, G, and R (vertical, horizontal/ combined, b ...

  • Epson Professional Series II - page 59

    AC fine Voltage Input power Input ranges 135 Watts maximum; universal power supply and automatic line voltage selection 90 to 132 VAC and 180 to 264 VAC Frequency 48 to 63 Hz Line voltage connector CEE 22-6A Environmental Requirements Operating range (non-condensing) 20% to 80% RH i 10,000 ft (3.000 m) Reliability MTBF -4°F to +140°F 5% to 90% RH ...

  • Epson Professional Series II - page 60

    External Controls Front Power button, Function button, Adjustment button, Memory select button, Memory store button, Memory recall button, Brightness button, Contrast button, Degauss button, Input select button Back HIGHi75Q switch Adjustable Display Parameters Horizontal phase, width, vertical shift, height, vertical convergence, horizontal conver ...

  • Epson Professional Series II - page 61

    Dimensions 21.2" (538 mm) * - * 5.2' (132 mm) * 15.2' (385 mm) 19.6' (498 mm) ( 15.0" (380 mm) . 15.4" (392 mm) 4 w t 13.0" (330 mm)* Tilt and swivel base Professional Series II Monitor 53 ...

  • Epson Professional Series II - page 62

    lnferface Connectors Video interface cable connectors 15-pin, D-Sub miniature, VGA Mini D-sub connector pin signals If you want to use the monitor’s BNC connectors, check the table below to determine which video interface cable(s) and BNC connectors to use with your system. BNC connector signals Blue 54 Professional Series II Monitor ...

  • Epson Professional Series II - page 63

    MADE IN ITALY A804341 l00-240V~ 50-60Hz 2.6-1.6A T1185U I lllllll Ill lllll lllll lllll lllll lllll Ill1 I II II lllll lllll llllll lllll llll Ill1 AN069247 001009 I lllllll llllll II llllll lllll lllll llllllllll lllll lllll lllll lllll lllll Ill1 llll I~11111 IIII III lllll III1 IllI Ill11 III lllll IIll 1l111 III III II11 *311920612491* ...

Manufacturer Epson Category Computer Monitor

Documents that we receive from a manufacturer of a Epson Professional Series II can be divided into several groups. They are, among others:
- Epson technical drawings
- Professional Series II manuals
- Epson product data sheets
- information booklets
- or energy labels Epson Professional Series II
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson Professional Series II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson Professional Series II, service manual, brief instructions and user manuals Epson Professional Series II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson Professional Series II.

Similar manuals

A complete manual for the device Epson Professional Series II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson Professional Series II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson Professional Series II.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson Professional Series II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson Professional Series II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson Professional Series II, that we can find in the current document
3. Tips how to use the basic functions of the device Epson Professional Series II - which should help us in our first steps of using Epson Professional Series II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson Professional Series II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson Professional Series II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson Professional Series II?

Use the form below

If you did not solve your problem by using a manual Epson Professional Series II, ask a question using the form below. If a user had a similar problem with Epson Professional Series II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)