Manual Kenmore 415.161108

28 pages 8.71 mb
Download

Go to site of 28

Summary
  • Kenmore 415.161108 - page 1

    Use and Care Guide LiquidPropane Gas Grill Kenmore Model No. 415.16110800 This Grill is For Outdoor Use Only ® • Read this manual before cooking on grill. Failure to follow all manufacturer's instructions could result in fire or e×plosion which could cause property damage, personal injury or death. • Combustion by=products produced when ...

  • Kenmore 415.161108 - page 2

    if you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. if odor continues, keep away from the appliance and immediately call your gas supplier or your fire department. 1. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance. 2. An LP cylinder not c ...

  • Kenmore 415.161108 - page 3

    For Your Safety ...................................... 2 Grill Service Center ................................... 2 Product Record Information ............................ 2 Safety Symbols ...................................... 2 Installation Safety Precautions .......................... 2 Kenmore Grill Warranty ............................... 3 Us ...

  • Kenmore 415.161108 - page 4

    • NEVER store a spare LP tank under or near grill or in enclosed areas • Never fill the cylinder beyond 80% full. • An overfilled or improperly stored tank is a hazard due to possible gas release from the safety relief valve. • if you see, smell or hear escaping gas, immediately get away from the LP tank/grill and call your fire department. ...

  • Kenmore 415.161108 - page 5

    LP Tank Exchange o Many retailers that sell grills offer you the option of replacing your empty LP tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their cylinders. Exchange your tank only for an OPB safety feature-equipped tank as described in the "LP Tank" secti ...

  • Kenmore 415.161108 - page 6

    Hold coupling nut and regulator as shown for proper connection to LP tank valve. Leak Testing Valves, Hose and Regulator 1. Turn all grill control knobs to OFF. , 3. Be sure regulator is tightly connected to LP tank. Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately. Ther ...

  • Kenmore 415.161108 - page 7

    For Safe Use Of Your Grill And To Avoid Serious injury: • Do not let children operate or play near grill. • Keep grill area clear and free from materials that burn. • Do not block holes in bottom or back of grill. • Check burner flames regularly. • Use grill only in well-ventilated space. NEVER use in enclosed space such as carport, garag ...

  • Kenmore 415.161108 - page 8

    Main burner Ignitor Lighting A Do not lean over grill while lighting. 1. Open lid during lighting. 2. Turn ON valve from source or tank. 3. Push and turn Ignition Burner control knob to _- HI and immediately press and hold Electronic Ignition button. 4. If ignition does NOT occur in 5 seconds, turn Left Burner control knob OFF, wait 5 minutes for g ...

  • Kenmore 415.161108 - page 9

    Turning Grill Off . Turn all knobs to OFF position. Turn LP tank off by turning OPD hand wheel clockwise to a full stop. Ignitor Check • Turn gas off at LP tank. Press and hold ignitor button. "Click" should be heard and spark seen each time between collector box or burner and electrodes. See "Troubleshooting" if no click or s ...

  • Kenmore 415.161108 - page 10

    Cleaning the Burner Assembly Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill. 1. Turn gas off at control knobs and LP cylinder, 2. Remove cooking grate and vaporiser bar. 3. Under grill remove grease cup, disconnect ignitor wire and clips from burner. To remove clips pull down on larg ...

  • Kenmore 415.161108 - page 11

    1 2 2 1 3 1 4 1 5 1 6 1 7 2 8 1 9 2 10 4 11 5 12 12 13 46 14 1 15 1 16 1 17 16 18 2 19 2 20 1 21 1 22 1 23 1 24 1 25 1 26 1 27 32 28 1 29 1 3O 1 31 1 32 1 33 3 34 22 35 1 36 1 37 2 38 2 39 4 4O 4 41 4 42 1 43 1 Description ......................... Part # Upper Leg .......................... 80010075 Leg, LeftFront ....................... 80010080 ...

  • Kenmore 415.161108 - page 12

    12 °464810408 ,# (_/-o G ® _b ® ...

  • Kenmore 415.161108 - page 13

    Left Leg Place one upperleg as shown. NOTE: Left front and left back legs do not have leg extenders. In front, attach upperleg, side brace and left front leg (curve) with #10-24x1-1/4" screw and #10-24flange nut. In back, attach upperleg, side brace and left back leg (straight) with #10-24x1-1/4" screw and #10-24flange nut. Do not tighten ...

  • Kenmore 415.161108 - page 14

    Tank Exclusion Wire Hooktank exclusion wire into legs with opening for LPcylinderon side brace side. Side Brace Larger openingside TankExclusionWire D Upperand Lower Panels Lay front legs down on the floor. Fit upperpanelwith two tabs between legs.Attach with #10-24x2" screws and #10-24 flange nuts. Fit lower panel aroundtank exclusion wire ...

  • Kenmore 415.161108 - page 15

    Back Braces to Cart Remove previously attached screwsand nutsfrom upper legs as shown. Attach back braces with #10-24x1-1/4" screws and #10-24flange nuts. Back Brace / 12 #10-24xl -1/4" Remove screws and Screw nuts to attach back brace Qty. 6 13 #10-24Flange Nut Qty. 6 Back Brace 12 Wheels Turn assembly upside down. Insert axle rod throug ...

  • Kenmore 415.161108 - page 16

    17 Control Panel and Upper Firebox Supports Stand cart upright. In front, fit control panel betweenleft and right legs. Insert #10-24x2" screws to hold panelin place. Place upperfirebox supports onto screws makingsure angleside is facing the front and attach with #10-24 flange nuts, In back, attach upperfireboxsupport with #10-24x2" screw ...

  • Kenmore 415.161108 - page 17

    Heat Shield Attach heat shield with #10-24x1/2" screws and#10-24flange nuts. HeatShield 27 27 #10-24Xl/2" Screw Qty. 2 13 #10-24Flange Nut Qty. 2 Tank Retainer Insert tank retainer into side brace and securewith wing screw. 30 Wing Screw Qty. 1 S Retainer 464810408 • 17 ...

  • Kenmore 415.161108 - page 18

    Burner, Firebox and Control Knobs Place burner assembly into firebox (A). Fasten the burnerassembly to the firebox using 5ram fiber washers and #10-24x 1/2" machine screws. Place fireboxonto upper fireboxsupports with burner tubes below heat shield.Makesure burner tubes are correctly engaged. If burneris not leveled from left to right,adjustth ...

  • Kenmore 415.161108 - page 19

    Shelves Insert mounting brackets into side shelfsupports with #10-24x1/2"screws (A). Attach backof leg with 1/4"-20x1-1/4"screws and!/4"-20 flange nuts, Do not fully tighten. Attach mounting bracketsto front of leg with 1/4"-20x1/2"screws (B). Fullytightenall screws. Repeat above steps to attach side burnershelf to car ...

  • Kenmore 415.161108 - page 20

    Sideburner Attach sideburner valvewith #8-32x3/8" machine screws (A). Attach sidebumerpanwith #8x3/8" self-tap screws and 5mm ID 9mm OD fiber washers. Place sideburner into shelf(B). Makesure valve is inside sidebumer tube.Attach sideburner with wing nut and 5mm ID 9mm OD fiber washer. Insert one end of burnerclip into hole in sidebumer t ...

  • Kenmore 415.161108 - page 21

    27 Lower Firebox Hinges Attach lower hinges to backof firebox using #10-24x1/2"screws, 5ram fiber washers and #10-24 flange nuts. The centerflat portion of the hingeshould be at the bottom (see inset). #10-24x1/2" Screws Qty. 4 34 5mm Fiber Washers 13 Qty. 8 13 #10-24Flange Nut Qty. 4 27 Lid Handle and Upper Hinges Attach handle to lid wi ...

  • Kenmore 415.161108 - page 22

    Lid Place lid assembly onto firebox, aligning hinges. Hinges on lid fit inside hinges on firebox. Secure using two hinge pins and hitch pins (See inset ). 11 Hitch Pins Qty. 2 10 Hinge Pins Qty. 2 Heat Diffuser Place heat diffuser over screws in firebox. Heat Diffuser 22. 464810408 ...

  • Kenmore 415.161108 - page 23

    Cooking Grate Place grate into firebox. Cooking Grate Swing Away } Insert ends of Swing Away pivotwire into holes in sidesof grill lid. Insert ends of Swing Away legwire into holes in sidesof firebox. NOTE: Pivotand legwires, runningside-to-side, should be under wires running front-to-back. If pivotand leg wiresare on top, Swing Away is installedup ...

  • Kenmore 415.161108 - page 24

    Grease Cup Clip and Grease Cup Hang grease cup clip from bottom of fireboxand place grease cup into grease cup clip. CAUTION FaUure to install grease cup clip and cup will cause hot grease to drip from bottom of grill with risk of fire or property damage, Grease Cup Clip Grease Cu LP Tank LP tank is sold separately. Useonly with an OPD (over-fillpr ...

  • Kenmore 415.161108 - page 25

    Troubleshooting EMERGENCIES: if a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department. , Damaged hose. , Turn off gas at LP tank. If hose is cut or cracked,replace Gas leaking from cracked/cut/burned valve/hose/regulator. See LP TankLeak Test and Connecting hose. Regulator To The LPTank. Gas leaking from LP , M ...

  • Kenmore 415.161108 - page 26

    Burner(s) will not light using ignitor. Troubleshooting (continued} , Push-button sticks at bottom.. Burner(s) will not match light. Suddendrop in gas flow or low flame. Flames blow out. Flare-up. Persistent grease fire. Flashback... (fire in burner tube(s)). Unable to fill LP tank. Oneburnerdoes not light from other burner(s). , Sparking between i ...

  • Kenmore 415.161108 - page 27

    Troubleshooting - Electronic ignition , Battery not installed properly. SECTION I No sparks appearat any electrodes when ignition buttonis pushed; no noise can be heardfrom spark module. SECTION II No sparks appearat any electrodes when ignition switchis pushed; noise can be heardfrom spark module. . Dead battery. . Buttonassembly not . installedpr ...

  • Kenmore 415.161108 - page 28

    Your Home ':;i_i_i_i_i_i_i_i_i_i_i_i_i_i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii Forrepair-in yourhome-ofall majorbrand appliances, iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii lawn and garden equipment, or heating and cooling systems, iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii nomatterwhomadeit, nomatterwhosoldit! iiiiiiiiiiiiii ...

Manufacturer Kenmore Category Gas Grill

Documents that we receive from a manufacturer of a Kenmore 415.161108 can be divided into several groups. They are, among others:
- Kenmore technical drawings
- 415.161108 manuals
- Kenmore product data sheets
- information booklets
- or energy labels Kenmore 415.161108
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenmore 415.161108.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenmore 415.161108, service manual, brief instructions and user manuals Kenmore 415.161108. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenmore 415.161108.

Similar manuals

A complete manual for the device Kenmore 415.161108, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenmore 415.161108 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenmore 415.161108.

A complete Kenmore manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenmore 415.161108 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenmore 415.161108, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenmore 415.161108, that we can find in the current document
3. Tips how to use the basic functions of the device Kenmore 415.161108 - which should help us in our first steps of using Kenmore 415.161108
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenmore 415.161108
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenmore 415.161108 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenmore 415.161108?

Use the form below

If you did not solve your problem by using a manual Kenmore 415.161108, ask a question using the form below. If a user had a similar problem with Kenmore 415.161108 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)