English dropdown-ico

Manual Evolution EVO-50

15 pages 1.32 mb
Download

Go to site of 15

Summary
  • Evolution EVO-50 - page 1

    Evo²–8 Evo²–10 Evo²–20 Evo²–30 Evo²–40 Evo²-50 Evo²–Centre Evo²–DFS Evolution² USER MANUAL Pacific Evo220066.qxd 18/10/2006 10:23 Page 1 ...

  • Evolution EVO-50 - page 2

    2 2 User W arnings Quick Start Guide About Y our L oudspeaker Specifications Quality Assurance Accessories CONTENTS WITHIN THIS P ACK Evolution² Pacific Evo220066.qxd 18/10/2006 10:23 Page 1 ...

  • Evolution EVO-50 - page 3

    3 3 4 4 Please read the following notes carefully . They will help you to install your loudspeakers correctly and safely . Switch off the amplifier and all sources before making connections to your sound system. When you switch on the system or change sources, set the volume control to minimum and turn up the level gradually . The position of your ...

  • Evolution EVO-50 - page 4

    5 5 6 6 Evolution² Always take care when lifting heavy objects. Lift the speakers out by their sides. If possible, keep the packaging in case you need to move or return your speakers. Carefully remove each loudspeaker from its packing carton. Do NOT lift speakers via the polythene bag. Be especially careful when removing large floor- standing spea ...

  • Evolution EVO-50 - page 5

    7 7 8 8 Evolution² CHECK YOU HA VE Evo²-8,10 Evo²-20,30,40,50 Evo²-DFS User Pack User Pack User Pack Evolution² FITTING SPIKES (EVO²-20,30,40) Floor standing Evolution² speakers are sup- plied with a set of floor spikes. Invert the loudspeaker and place the top on a soft surface. Screw the spikes into the bushes fitted in the base of the cab ...

  • Evolution EVO-50 - page 6

    1 1 0 0 Evolution² 9 9 CONNECTING HIFI SPEAKERS POSITIONING FRONT SPEAKERS Single wired a single amplifier , link bars are fitted Bi-wired – a single amplifier , with separate wires to drive the bass/mid unit and the treble unit. Note that the wiring link bars are removed. Bi-amplified – two amplifiers. One drives each section. Note that the w ...

  • Evolution EVO-50 - page 7

    1 1 1 1 1 1 2 2 Evolution² Evolution² POSITIONING A V SPEAKERS THE HOME THEA TRE ENVIRONMENT Fr ont and Effects Channels The front loudspeakers are placed on either side of the television screen, 2 to 3 metres apart. The speakers should be angled slightly so they are aimed towards the listeners. As the rear surround channels are the ‘effects’ ...

  • Evolution EVO-50 - page 8

    Evolution² Evolution² 1 1 3 3 1 1 4 4 Setting Loudspeaker Sizes Many digital AV Processors require you to specify the size of speakers in all channels. These are usually ‘Large or small’. Always set the Evo²-DFS and the Evo²-Centre to ‘small’. IF Y Y OU A A RE U U SING A A S S UBWOOFER For t t he E E VO² -8 8 a a nd 1 1 0 w w hen u u s ...

  • Evolution EVO-50 - page 9

    1 1 5 5 1 1 6 6 For technical support, servicing or product queries and information please contact either your local retailer or the offices below . TECHNICAL SUPPORT AND INFORMA TION UK IAG Service Centre Unit 4, St Margaret’s Way Stukeley Meadows Industrial Estate Huntingdon, Cambs, PE29 6EB England T el:+44 (0)1480 452561 Fax: +44 (0)1480 1340 ...

  • Evolution EVO-50 - page 10

    Evolution² Evolution² 1 1 7 7 1 1 8 8 ABOUT YOUR LOUDSPEAKER The Evolution² series is a range of versatile loudspeakers equally outstanding in both Audio-Visual and 2-Channel applications. When used in Home Cinema systems with the designed DFS surround loudspeaker and the SW range of sub- woofers, they offer a performance unsurpassed in their cl ...

  • Evolution EVO-50 - page 11

    Evolution² 2 2 0 0 Evolution² 1 1 9 9 THE DRIVE UNITS THE BASS DRIVERS The bass driver(s) incorporates a new design of cone utilising our own Kevlar bi-weave process. Kevlar has immense longitudinal strength and is used in many structures where high strength and light weight are key attributes. Kevlar can be found liberally used in Formula 1 raci ...

  • Evolution EVO-50 - page 12

    2 Way 5” 125mm 1” 25mm 6 Ohms 4.0 - 17.0 65Hz-28kHz 45Hz 32kHz 87dB <7% <1% 75 Watts 30–150W 107dB 90 to 12kHz 70 to 12kHz ported 10 litres 50Hz 2.0kHz 15 & 25mm MDF Satin Lacquer finished real wood veneers of Light Maple, Rosewood, Cherry , Black Ash 13118 0367 330 x 185 x 336 7.0kg x 2 440 x 485 x 375 15.5kg Evolution² 2 2 2 2 Ev ...

  • Evolution EVO-50 - page 13

    Crossover sections T ype Wiring Connections 2 way , 2.5 way , 3 way Butterworth HQ OFC cable solder CROSSOVER SPECIFICA TIONS Part number Dome material & size Coil size & type Magnet d1 x h Magnet weight SPL 1w @ 1m Fs Frequency range -3dB Upper frequency limit -10dB Distortion at 100dB @ 1m 0367 25mm textile 25mm aluminium 25.4 x 4mm Neody ...

  • Evolution EVO-50 - page 14

    Evolution² 2 2 6 6 Evolution² 2 2 5 5 QUALITY MANAGEMENT Y our loudspeakers have been constructed to the highest standards of quality throughout. The acoustic components and the whole system have been manufactured to very tight tolerances of +/- 1.5 decibel of sound pressure level for each driver through- out the operation range of the unit. All ...

  • Evolution EVO-50 - page 15

    Wharfedale International Ltd. IAG House, Sovereign Court, Ermine Business Park, Huntingdon. PE29 6XU. England. T el : 0845 458 0011 / +44 (0) 1480 447700 Fax : +44 (0) 1480 431767 www .wharfedale.co.uk Pacific Evo220066.qxd 18/10/2006 10:24 Page 26 ...

Manufacturer Evolution Category Speaker

Documents that we receive from a manufacturer of a Evolution EVO-50 can be divided into several groups. They are, among others:
- Evolution technical drawings
- EVO-50 manuals
- Evolution product data sheets
- information booklets
- or energy labels Evolution EVO-50
All of them are important, but the most important information from the point of view of use of the device are in the user manual Evolution EVO-50.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Evolution EVO-50, service manual, brief instructions and user manuals Evolution EVO-50. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Evolution EVO-50.

Similar manuals

A complete manual for the device Evolution EVO-50, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Evolution EVO-50 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Evolution EVO-50.

A complete Evolution manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Evolution EVO-50 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Evolution EVO-50, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Evolution EVO-50, that we can find in the current document
3. Tips how to use the basic functions of the device Evolution EVO-50 - which should help us in our first steps of using Evolution EVO-50
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Evolution EVO-50
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Evolution EVO-50 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Evolution EVO-50?

Use the form below

If you did not solve your problem by using a manual Evolution EVO-50, ask a question using the form below. If a user had a similar problem with Evolution EVO-50 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)