-
Tiger Products Co., Ltd JD 5520 - page 1
P AR TS LISTING WITH MOUNTING AND OPERA TING INSTRUCTIONS TRIPLE FLAIL ASSEMBLIES JD 5520 CAB, WOC 34300 Tiger Corporation 3301 N. Louise Ave. Sioux Falls, SD 57107 1-800-843-6849 1-605-336-7900 www .tiger-mowers.com Current as of 10/29/2010 ...
-
Tiger Products Co., Ltd JD 5520 - page 2
T O THE OWNER / OPERA T OR / DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize ...
-
Tiger Products Co., Ltd JD 5520 - page 3
FOR W ARD This manual contains information about many features of the T iger mowing and roadside maintenance equipment. Some of these include: Safety precautions, Assembly instructions, Operations, Maintenance and Parts. This manual will also assist you in the proper break-in, daily care, and troubleshooting of your new mower . We recommend that yo ...
-
Tiger Products Co., Ltd JD 5520 - page 4
...
-
Tiger Products Co., Ltd JD 5520 - page 5
T ABLE OF CONTENTS SAFETY _____________________________________________ 1-1 Safety Information__________________________________ 1-2 ASSEMBL Y / MOUNTING SECTION _______________________ 2-1 OPERA TION SECTION _________________________________ 3-1 MAINTENANCE SECTION ______________________________ 4-1 P ARTS SECTION _________________________________ ...
-
Tiger Products Co., Ltd JD 5520 - page 6
...
-
Tiger Products Co., Ltd JD 5520 - page 7
Triple Flail Safety Section 1-1 SAFETY SAFETY SECTION ...
-
Tiger Products Co., Ltd JD 5520 - page 8
Triple Flail Safety Section 1-2 SAFETY Indicates an imminently hazardous situation that, if not avoided, WILL result in DEA TH OR VERY SERIOUS INJURY . Indicates an imminently hazardous situation that, if not avoided, COULD result in DEA TH OR SERIOUS INJUR Y . Indicates an imminently hazardous situation that, if not avoided, MA Y result in MINOR I ...
-
Tiger Products Co., Ltd JD 5520 - page 9
Triple Flail Safety Section 1-3 SAFETY DANGER! Never operate the Tractor or Implement until you have read and completely understand this Manual, the Tractor Operator’s Manual, and each of the Safety Messages found in the Manual or on the Tractor and Implement. Learn how to stop the tractor engine suddenly in an emergency . Never allow inexperienc ...
-
Tiger Products Co., Ltd JD 5520 - page 10
Triple Flail Safety Section 1-4 SAFETY DANGER! Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. (SG-10) DANGER! Never allow children to operate or ride on the Tractor or Implement. (SG-11) WARNING! Do not mount the tractor while the tractor is moving. Mount the tractor onl ...
-
Tiger Products Co., Ltd JD 5520 - page 11
Triple Flail Safety Section 1-5 SAFETY WARNING! T ransport only at safe speeds. Serious accidents and injuries can result from operating this equipment at unsafe speeds. Understand the T ractor and Implement and how it handles before transporting on streets and highways. Make sure the T ractor steering and brakes are in good condition and operate p ...
-
Tiger Products Co., Ltd JD 5520 - page 12
Triple Flail Safety Section 1-6 SAFETY WARNING! Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running. Make sure the tractor engine is OFF before working on the Implement. (SG-20) WARNING! Periodically inspect all moving parts for wear and replace when necessary with autho ...
-
Tiger Products Co., Ltd JD 5520 - page 13
Triple Flail Safety Section 1-7 SAFETY DANGER! NEVER use drugs or alcohol immediately before or while operating the Tractor and Implement. Drugs and alcohol will affect an operator’s alertness and coordination and therefore affect the operator’s ability t o operate the equipment safely. Before operating the Tractor or Imple- ment, an operator o ...
-
Tiger Products Co., Ltd JD 5520 - page 14
Triple Flail Safety Section 1-8 SAFETY WARNING! Extreme care should be taken when operating near loose objects such as gravel, rocks, wire, and other debris. Inspect the area before mowing. Foreign objects should be removed from the site to prevent machine damage and/or bodily injury or even death. Any objects that cannot be removed must be clearly ...
-
Tiger Products Co., Ltd JD 5520 - page 15
Triple Flail Safety Section 1-9 SAFETY DANGER! Flail Mowers are capable under adverse conditions of throwing objects for great distances (100 yards or more) and causing serious injury or death. Follow safety messages carefully. STOP MOWING IF PASSERSBY ARE WITHIN 100 YARDS UN- LESS: -Front and Rear Deflectors are installed and in good, working cond ...
-
Tiger Products Co., Ltd JD 5520 - page 16
Triple Flail Safety Section 1-10 SAFETY DANGER! Always disconnect the main PTO Driveline from the Tractor before performing service on the Mower. Never work on the Mower with the tractor PTO driveline connected and running. Blades or Drivelines could turn without warning and cause immediate entanglement, injury or death. (SRM-3) WARNING! Do not let ...
-
Tiger Products Co., Ltd JD 5520 - page 17
Triple Flail Safety Section 1-11 SAFETY WARNING! In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of th ...
-
Tiger Products Co., Ltd JD 5520 - page 18
Triple Flail Safety Section 1-12 SAFETY 22839 MOWER DECK 21405 MOWER DECK 22865 MOWER DECK P AR T NO. LOCA TION 22840 INSIDE OF CAB ...
-
Tiger Products Co., Ltd JD 5520 - page 19
Triple Flail Safety Section 1-13 SAFETY 42350 MOWER DECK 24028 MOWER DECK 33743 INSIDE OF CAB 10” x 5.5” 31522 MOWER DECK 18” x10” 31523 HYDRAULIC T ANK P AR T NO. LOCA TION ...
-
Tiger Products Co., Ltd JD 5520 - page 20
Triple Flail Safety Section 1-14 SAFETY 6T3217 MOWER DECK 42399 MOWER DECK 6T3219 INSIDE OF CAB 6T3220 FRONT PUMP MOUNT P AR T NO. LOCA TION 42400 MOWER DECK ...
-
Tiger Products Co., Ltd JD 5520 - page 21
Triple Flail Safety Section 1-15 SAFETY 6T3232 INSIDE OF CAB 6T3224 MOWER DECK 6T3222 INSIDE OF CAB P AR T NO. LOCA TION 6T3230 INSIDE OF CAB ...
-
Tiger Products Co., Ltd JD 5520 - page 22
Triple Flail Safety Section 1-16 SAFETY 6T3236 MOWER DECK HYDRAULIC T ANK 6T3233 HYDRAULIC T ANK 6T3234 INSIDE OF CAB P AR T NO. LOCA TION 6T3242 INSIDE OF CAB ...
-
Tiger Products Co., Ltd JD 5520 - page 23
Triple Flail Safety Section 1-17 SAFETY 34852 HYDRAULIC T ANK D538 ON MOWER HEAD ...
-
Tiger Products Co., Ltd JD 5520 - page 24
Triple Flail Safety Section 1-18 SAFETY ITEM PART NO. QTY. DESCRIPTION 50023 AVAIL MANUAL CANISTER COMPLETE 1 00776031 1 ROUND MANUAL CANISTER 33997 1 DECAL, SHEET, MANUAL CANISTER 2 * DECAL 3 * DECAL 4 * DECAL 5 * AVAIL SPECIFIC PRODUCT MANUAL 6 33753 1 E M I SAFETY MANUAL 7 34296 1 FRONT ADHESIVE PAD 8 34297 1 REAR ADHESIVE PAD 9 6T1823 4 ZIP TIE ...
-
Tiger Products Co., Ltd JD 5520 - page 25
Triple Flail Safety Section 1-19 SAFETY This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such . Employer-Employee Operator Regulations U.S. P ...
-
Tiger Products Co., Ltd JD 5520 - page 26
Triple Flail Safety Section 1-20 SAFETY ...
-
Tiger Products Co., Ltd JD 5520 - page 27
ASSEMBL Y SECTION Assembly Section 2-1 ...
-
Tiger Products Co., Ltd JD 5520 - page 28
Assembly Section 2-2 ASSEMBL Y Before attempting to mount or service your Tiger mower , it is import ant to read and understand all of the information in the Safety section of this manual. Check complete shipment list against the packing list to make sure there are no shortages. Make certain the tractor model is the appropriate one for the mower re ...
-
Tiger Products Co., Ltd JD 5520 - page 29
Assembly Section 2-3 ASSEMBL Y HEA TER LINE MODIFICA TION (CAB UNITS) Some later modles require heater line modifications. Drain the anti-freeze from the tractor . Find the two short heater hoses located on the outside lower front corner of the cab. Follow these hard lines under the tractor motor to the oil pan and label each line the same on both ...
-
Tiger Products Co., Ltd JD 5520 - page 30
Assembly Section 2-4 ASSEMBL Y CABLE CONTROL LEVER ST AND On the corner cab post, mark a point at 1-3/8” from the windshield and 22 ½” from thefloor; then cut a ¾” diameter hole through the outer plastic shell. This will expose a threaded steel boss to attach the control box support bracket. The rear corner of the cable control stand is pla ...
-
Tiger Products Co., Ltd JD 5520 - page 31
Assembly Section 2-5 ASSEMBL Y SWITCH BOX WIRING The floor covering will need to be removed to route the wires to the front console panel. Refer to the parts section for wiring diagram to hook up the switch box. Cover the four wires from the switch box with plastic wire wrap provided. Route the wires from the switch box down to the floor and under ...
-
Tiger Products Co., Ltd JD 5520 - page 32
Assembly Section 2-6 ASSEMBL Y Install the valve mounting plate onto the window frame with the hardware provided. Refer to the part s section for all part s and hardware needed. Align and mount the mounting plate under the window fame with the three capscrews, flatwasher , lockwasher and hex nut. DO NOT tighten. Next install the capscrew and lockwa ...
-
Tiger Products Co., Ltd JD 5520 - page 33
Assembly Section 2-7 ASSEMBL Y SECTIONAL V AL VE MOUNTING (WO/CAB) Refer to the parts section, lift valve page for hardware and location of components. First, attach control valve stand to the top of the main frame mast with cap-screws, lock-washers and hex nuts. NOTE: The mounting plate should face the rear of the tractor . Attach the 4-spool cont ...
-
Tiger Products Co., Ltd JD 5520 - page 34
Assembly Section 2-8 ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 35
Assembly Section 2-9 ASSEMBL Y PRESSURE LINE INST ALLA TION (CAB UNITS) The hydraulic pressure line will be plumbed into the tractor hydraulic pump. Locate the pressure hard line between the pump and remotes near the right rear axle, remove the hard line (refer to the illustration below and the Parts Section). After the hard line is removed then co ...
-
Tiger Products Co., Ltd JD 5520 - page 36
Assembly Section 2-10 ASSEMBL Y POWER BEYOND INST ALLA TION (CAB UNITS) T o install the power beyond lines from a Husco lif t valve to the tractor remote valve, locate the port on the bottom of the tractor remote valve where the hard line had been previously removed. Next connect a hose to the bottom of tractor remote valve, then to the top front p ...
-
Tiger Products Co., Ltd JD 5520 - page 37
Assembly Section 2-11 ASSEMBL Y INST ALLING O-RING FITTINGS Installing straight, 45 degree and 90 degree O-ring fittings requires that the O-ring, washer and nut (A) be up against the swivel body (B). Insert the swivel and turn in until the swivel is pointed in the right direction and O-ring contact is made. Hold swivel in set direction with a wren ...
-
Tiger Products Co., Ltd JD 5520 - page 38
Assembly Section 2-12 ASSEMBL Y MAIN FRAME MOUNTING Raise front of tractor as needed and slide the main frame under tractor from right hand side. With an overhead hoist and / or jack-stands, raise the frame up to the correctly matching mounting holes. Install cap-screws and all other hardware as shown in main frame parts section. Remove the cap-scr ...
-
Tiger Products Co., Ltd JD 5520 - page 39
Assembly Section 2-13 ASSEMBL Y TEMPERA TURE GAUGE MOUNTING (OPTIONAL) Mount the temperature gauge where it is clearly visible to the operator . Att ach the green ( - ) wire from the negative post on the gauge to a grounded bolt on the tractor frame. Remove paint if needed to make a good ground. Remove the pipe plug from the side of the hydraulic r ...
-
Tiger Products Co., Ltd JD 5520 - page 40
Assembly Section 2-14 ASSEMBL Y DRAFT BEAM MOUNTING Pull the inboard cylinder piston rod down to the extreme extended position. Slide the draft beam under the cylinder , and align clevis hole with draft beam hole nearest to the tractor . Install pin and secure with rollpin. Using inboard cylinder as a pivot point, slide draft beam under tractor and ...
-
Tiger Products Co., Ltd JD 5520 - page 41
Assembly Section 2-15 ASSEMBL Y Slide other end of pivot arm with short distance between the cut-out and the end of the pivot arm, into the cylinder clevis. Next, line up the holes of the left and right lift linkage arms outside of the cylinder clevis holes. Connect with linkage pin, shims (as required), boss, cap-screw , lock-washer and hex nut as ...
-
Tiger Products Co., Ltd JD 5520 - page 42
Assembly Section 2-16 ASSEMBL Y ST OP BOL T ADJUSTMENT The stop bolt is not required on flail side mowers and should not be installed on the combo draft beam. NOTE: When the outboard cylinder is fully extended, the bonnet should be up against the stop or if travel locks are installed, it should be up against the travel lock. It may be necessary to ...
-
Tiger Products Co., Ltd JD 5520 - page 43
Assembly Section 2-17 ASSEMBL Y CONTINUOUS DUTY SOLENOID SWITCH Mount the solenoid switch, drill holes to match, and 30 AMP breaker mounting tab, mount in dry and well protected area. Secure with 3/8” x 1” capscrews, lockwashers, and hex nuts. A.) RED 6 GA. wire from terminal (D) to +12 volt battery post on starter solenoid. B.) RED 14 GA. wire ...
-
Tiger Products Co., Ltd JD 5520 - page 44
Assembly Section 2-18 ASSEMBL Y FINAL PREP ARA TION FOR OPERA TION Place operators safety and operation decals on the steering column and side console where they are clearly visible to the operator . These decals should be understood by each operator of the machine in conjunction with the safety and operation section of this book. The decals are to ...
-
Tiger Products Co., Ltd JD 5520 - page 45
Triple Flail Operation Section 3-1 OPERA TION OPERA TION SECTION ...
-
Tiger Products Co., Ltd JD 5520 - page 46
Triple Flail Operation Section 3-2 OPERA TION Safety is of primary importance to the owner / operator and to the manufacturer . The first section of this manual includes a list of Safety Messages, that, if followed, will help protect the operator and bystanders from injury or death. Many of the messages will be repeated throughout the manual. The o ...
-
Tiger Products Co., Ltd JD 5520 - page 47
Triple Flail Operation Section 3-3 OPERA TION ST ARTING TRACT OR AND MOWER Check the operators manual received from the tractor manufacturer , for their recommendation and procedures pertaining to your particular make and model. When rotating parts are in motion, serious injury may occur if caution is not used or danger is not recognized. Never all ...
-
Tiger Products Co., Ltd JD 5520 - page 48
Triple Flail Operation Section 3-4 OPERA TION The rear mower height is controlled with the 3-point hitch control lever . Follow the instructions for this control is the tractor operators manual. The tilt of the rear mower is controlled with the third spool if the lift valve and is coordinated as shown above. The left and right mower on/off switches ...
-
Tiger Products Co., Ltd JD 5520 - page 49
Triple Flail Operation Section 3-5 OPERA TION The mower will operate more efficiently in tougher conditions and with less power if the knives are kept sharp. If the mower begins to vibrate, stop the tractor , check for wire wrapped in the spindle or damaged knives. When replacing knives, replace all knives with new knives to ensure proper balance s ...
-
Tiger Products Co., Ltd JD 5520 - page 50
Triple Flail Operation Section 3-6 OPERA TION TRANSPORTING MOWER T ransporting under the units own power: When transporting between job sites or between cutting passes, the following procedure should be followed: Shut off the power to the cutting head(s) and allow all motion to come to a complete stop. Raise the draft beam to it’s highest positio ...
-
Tiger Products Co., Ltd JD 5520 - page 51
Triple Flail Operation Section 3-7 OPERA TION Next, switch the hose ends and reconnect to form two separate closed loops, see diagram below . Disconnect the lift cable from the head and secure the loose end back onto the cable with the cable clevis. Remove the keeper bolt and draft beam outer pivot pin. Separate the mower head from the tractor . No ...
-
Tiger Products Co., Ltd JD 5520 - page 52
Triple Flail Operation Section 3-8 OPERA TION ...
-
Tiger Products Co., Ltd JD 5520 - page 53
Triple Flail Operation Section 3-9 OPERA TION Flail Mower PRE-OPERA TION Inspection T ractor ID#____________ Make_____________________ Date:__________________ Shift______________________ Before conducting the inspection, make sur e the T ractor engine is of f, all rotation has stop and the tractor is in the Park with the parking brake engaged. The ...
-
Tiger Products Co., Ltd JD 5520 - page 54
Triple Flail Operation Section 3-10 OPERA TION TRACT OR PRE-OPERA TION Inspection T ractor ID#____________ Make_____________________ Date:__________________ Shift______________________ Before conducting the inspection, make sur e the T ractor engine is off, all rotation has stop and the tractor is in the Park with the parking brake engaged. The Mow ...
-
Tiger Products Co., Ltd JD 5520 - page 55
Triple Flail Operation Section 3-11 OPERA TION FRONT END LOADER PRE-OPERA TION Inspection Mower ID#_____________ Make___________________ Date:__________________ Shift____________________ Before conducting the inspection, make sur e the T ractor engine is off, all rotation has stop and the tractor is in the Park with the parking brake engaged. The L ...
-
Tiger Products Co., Ltd JD 5520 - page 56
Triple Flail Operation Section 3-12 OPERA TION TRACT OR PRE-OPERA TION Inspection T ractor ID#____________ Make_____________________ Date:__________________ Shift______________________ Before conducting the inspection, make sur e the T ractor engine is off, all rotation has stop and the tractor is in the Park with the parking brake engaged. The Loa ...
-
Tiger Products Co., Ltd JD 5520 - page 57
Triple Flail Maintenance Section 4-1 MAINTENANCE MAINTENANCE SECTION ...
-
Tiger Products Co., Ltd JD 5520 - page 58
Triple Flail Maintenance Section 4-2 MAINTENANCE T iger Mowers are designed for high performance and rugged durability , yet with simplified maintenance. The purpose of this section of the manual is to help the operator in the regular servicing of the mower . Regular maintenance at the intervals mentioned will result in the maximum efficiency and l ...
-
Tiger Products Co., Ltd JD 5520 - page 59
Triple Flail Maintenance Section 4-3 MAINTENANCE REGULAR MAINTENANCE The intervals at which regular servicing should be done are based on hours of operation. Use the tractors hour meter to determine when regular servicing is required. This symbol indicates a point that needs to be greased at an interval noted in the section below . Refer to the Det ...
-
Tiger Products Co., Ltd JD 5520 - page 60
Triple Flail Maintenance Section 4-4 MAINTENANCE WEEKL Y OR EVER Y 50 HOURS ITEM SERVICE COMMENTS In T ank Hyd. Fluid Change Change after first 50 Filter hours only , then every (10 micron filter) 500 hours or yearly In-Line High Pressure Change Change after first 50 Filter hours only , then every (10 micron filter) 500 hours or yearly MONTHL Y OR ...
-
Tiger Products Co., Ltd JD 5520 - page 61
Triple Flail Maintenance Section 4-5 MAINTENANCE SYMPTOMS CAUSE REMEDY Oil T emperature rises 1. Low oil level 1. Bring oil to proper level above 200 deg. F 2. Kinked/blocked hoses 2. Inspect, Repair , or Replace 3. Worn pump / motor 3. Disable and repair Mower will not start 1 . Blown fuse 1. Check fuse between mower switch or run and ignition / r ...
-
Tiger Products Co., Ltd JD 5520 - page 62
Triple Flail Maintenance Section 4-6 MAINTENANCE Motor will not work 1. Excessive wear 1. Disassemble and repair . on internal parts NOTE: If flow meter is available, check pressure and flow volume for all suspected hydraulic problems. If the solution to your problem cannot be found in this section, call the T echnical Service representative at the ...
-
Tiger Products Co., Ltd JD 5520 - page 63
Triple Flail Maintenance Section 4-7 MAINTENANCE T ORQUE SPECIFICA TIONS * These are intended to be general specifications. See tractor operators or service manual for exact specifications for your unit. ...
-
Tiger Products Co., Ltd JD 5520 - page 64
Triple Flail Maintenance Section 4-8 MAINTENANCE LUBRICA TION RECOMMENDA TIONS Description Application General Specification Recomended Mobil Lubricant Tractor Hydraulics Reservoir JD-20C Mobilfluid 424 MF M1 135,M1 141 FNHM2C134D (FNH201) Mower Hydraulics Reservoir Cold T emperatures 0 F S t art-Up ISO 46 Anti-Wear - Low T emp Mobil DTE 15M Normal ...
-
Tiger Products Co., Ltd JD 5520 - page 65
Triple Flail Maintenance Section 4-9 MAINTENANCE POL YCARBONA TE CARE & MAINTENANCE The proprietary UV and Abrasion Resistant surface coating on SHIELDS ® SUPERCOA TED ™ polycarbonate significantly improves performance. Periodic cleaning using proper procedures and compatible cleaners are recommended to prolong service life. T iger Corp. pol ...
-
Tiger Products Co., Ltd JD 5520 - page 66
Triple Flail Maintenance Section 4-10 MAINTENANCE RECOMMENDED FILLING INSTRUCTIONS FOR HYDRAULIC RESERVIORS When filling or checking the oil level, the unit should be parked on a level surface, shut “ OFF ”, and allowed sufficient time to cool to ambient temperature. Use caution when removing the pressurized breather . Do not place face over op ...
-
Tiger Products Co., Ltd JD 5520 - page 67
Triple Flail Maintenance Section 4-11 MAINTENANCE DET AILED MAINTENANCE REPLACEING HIGH PRESSURE HYDRAULIC FIL TER ELEMENT : Assure system has been shut down and de-pressurized. Locate High Pressure Filter housing. Confirm that the element that is about to be installed matches the element p/n on the filter model tag. Example: V3.0510-06 (world line ...
-
Tiger Products Co., Ltd JD 5520 - page 68
Triple Flail Maintenance Section 4-12 MAINTENANCE GREASING INNER AND OUTER DRAFT BEAM PIVOT POINTS Locate the grease zerks on the inner and outer draft beam pivot bosses. Inject Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specifications into each zerk until grease protrudes from joints. Grease all pivots daily or every 8 hou ...
-
Tiger Products Co., Ltd JD 5520 - page 69
Triple Flail Maintenance Section 4-13 MAINTENANCE GREASING PUMP DRIVE SHAFT COUPLER With engine stopped, ensure drive shaft alignment by grasping coupler and sliding back and forth. Coupler should slide freely with approximately 1/8” of end play . If coupler does not slide freely , inspect for loose pump mount bolts, or damaged or loose crank sha ...
-
Tiger Products Co., Ltd JD 5520 - page 70
Triple Flail Maintenance Section 4-14 MAINTENANCE ADJUSTING THE CUTTING HEIGHT Loosen the four ground roller bracket lock nuts. Loosen the adjustment rod lock nut and turn the adjustment rod to adjust the cutting height. The cutting height is indicated by the end of the adjustment rod on the cutting height decal. When cutting height has been achiev ...
-
Tiger Products Co., Ltd JD 5520 - page 71
Triple Flail Maintenance Section 4-15 MAINTENANCE BALL V AL VES The ball valves at the hydraulic reservoir may need to be closed during certain maintenance or repair procedures. THE BALL V AL VES MUST BE OPEN (handle p arallel with valve) WHEN TRACTOR IS RE-ST ARTED OR PUMP IS COUPLED TO MOTOR OR P .T .O. ! Failure to do so may result in component ...
-
Tiger Products Co., Ltd JD 5520 - page 72
Triple Flail Maintenance Section 4-16 MAINTENANCE GREASING CUTTER SHAFT – FLAIL MOWERS Locate grease zerks on each end of cutter shaft(s), these are located on the bearing cover . Normal conditions require one or two pump in each bearing, using Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specifications. This is to be done ...
-
Tiger Products Co., Ltd JD 5520 - page 73
Triple Flail Maintenance Section 4-17 MAINTENANCE GREASING THE IDLER TENSION ARMS Locate the access holes and grease zerks in the belt shields of the side and rear flails. Normal conditions require one pump daily or every 8 hours of service with multi purpose grease. IDLER TENSIONING Locate the idler tensioning rod for each flail. Loosen the lockin ...
-
Tiger Products Co., Ltd JD 5520 - page 74
Triple Flail Maintenance Section 4-18 MAINTENANCE ROST A TENSIONER - STD DTY REAR FLAILS Remove the guard over the belt shield. Then remove the belt shield that covers the tensioner , belt and sheaves. Place a straight edge over both sheaves and measure the belt tension(See TENSIONER MEASUREMENT PROCEDURE). T o adjust the Rosta T ensioner , first, ...
-
Tiger Products Co., Ltd JD 5520 - page 75
Triple Flail Maintenance Section 4-19 MAINTENANCE TENSIONER MEASUREMENT PROCEDURE 1. Measure the Belt S pan (SEE SKETCH). 2. Position the bottom of the Large “O” Ring on the S pan Scale at the measured Belt S pan. 3. Set the Small “O” Ring on the Deflection Force Scale to zero. 4. Place the tension gauge squarely on the belt at the center o ...
-
Tiger Products Co., Ltd JD 5520 - page 76
Triple Flail Maintenance Section 4-20 MAINTENANCE REVERSING MOWER ROT A TION OF SIDE AND REAR HYDRAULIC FLAIL MOWERS T o reverse the rotation of the side and hydraulically driven rear flail, a dif ferent idler arm is needed only for side flail. Part No. TF4346 is used in standard rotation. Part No. TF4345 is used in reverse rotation. When before at ...
-
Tiger Products Co., Ltd JD 5520 - page 77
Triple Flail Maintenance Section 4-21 MAINTENANCE Now disconnect the hoses and fittings from the motor and remove the taper-lock hub and pulley from the motor by removing the three hub bolts from the existing positions and inserting simultaneously into the threaded holes. Remove the four bolts holding the motor . Rotate the motor 180 ° so the hump ...
-
Tiger Products Co., Ltd JD 5520 - page 78
Triple Flail Maintenance Section 4-22 MAINTENANCE REVERSING MOWER ROT A TION REAR MECHANICAL DRIVEN FLAIL MOWERS Remove the rear shaft guard and disconnect the chain coupling to the shaft. Disconnect the P .T .O. drive shaft from the right angle gear box. Remove the gear box from the flail frame and lay down flat so that gear oil does not leak out. ...
-
Tiger Products Co., Ltd JD 5520 - page 79
Triple Flail Maintenance Section 4-23 MAINTENANCE Remove the belt shield. Then remove the adjusting nuts, washer and spring from the idler tensioning rod. Remove the clevis rod and small bushing from the idler arm. Remove the idler arm with the pulley attached. Remove the idler pulley from the idler arm and install the pulley on the other end of th ...
-
Tiger Products Co., Ltd JD 5520 - page 80
Triple Flail Maintenance Section 4-24 MAINTENANCE ST ANDARD OR HEA VY DUTY SIDE OR REAR FLAIL KNIFE REPLACEMENT 1 – If knives are damaged or badly worn, they will need to be replaced as a set. Replacing a single knife can cause severe vibration and possible damage to the mower . 2 – Assemble knives, bushings, collars, bolts and nuts as shown in ...
-
Tiger Products Co., Ltd JD 5520 - page 81
Triple Flail Maintenance Section 4-25 MAINTENANCE RECOMMENDED FILLING INSTRUCTIONS FOR REAR FLAIL GEAR BOX REAR FLAIL GEAR BOX Fluid level plug Gear box drain plug Input shaft guard When filling or checking the fluid level, the unit should be parked on a level surface with rear flail down on surface, shut “ OFF ”, and cold, (at ambient temperat ...
-
Tiger Products Co., Ltd JD 5520 - page 82
Triple Flail Maintenance Section 4-26 MAINTENANCE DAIL Y MAINTENANCE SCHEDULE The following services should be performed daily or every 8 hours of service, following the detailed maintenance instructions in the operators manual. ______ Pump Drive Shaft: Check for end play in drive shaft / coupler and lubricate at zerks. ______ Crankshaft adapter: I ...
-
Tiger Products Co., Ltd JD 5520 - page 83
P ARTS SECTION JD 5520 TRIPLE FLAIL, CAB, WOC Parts Section 5-1 ...
-
Tiger Products Co., Ltd JD 5520 - page 84
Parts Section 5-2 The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this manual. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locat ...
-
Tiger Products Co., Ltd JD 5520 - page 85
Parts Section 5-3 P ARTS SECTION T ABLE OF CONTENTS SECTION ASSEMBL Y P AG E TRACTOR SPECIFIC P ARTS: TRAC. MT . KIT – MAIN FRAME, 5520-CAB 06100935 5-4 TRAC. MT . KIT – MAIN FRAME, 5520-WOC 06100936 5-6 TRACTOR MOUNT KIT – FUEL T ANK CAB 06100935 5-8 TRACTOR MOUNT KIT – HYDRAULICS 06100935 5-10 LIFT V AL VE - 4SP CAB 5520 06100938 5-12 LIF ...
-
Tiger Products Co., Ltd JD 5520 - page 86
Parts Section 5-4 TRACTOR MOUNT KIT - MAIN FRAME, CAB, 5520 10-2-02 ...
-
Tiger Products Co., Ltd JD 5520 - page 87
Parts Section 5-5 TRACTOR MOUNT KIT - MAIN FRAME, CAB, 5520 ITEM PART NO. QTY. DESCRIPTION 1 34388 1 RESERVOIR TANK 2 34066 1 I N - T ANK FIL TER ASSY . 3 21627 4 NYLOCK NUTS 4 6T4197 1 PIPE PLUG 5 6T4200 3 PIPE PLUG 6 6T4201 2 PIPE PLUG 7 32262 1 MAIN FRAME 8 34371 1 AXLE BRACE RIGHT HAND 9 34370 1 AXLE BRACE LEFT HAND 1 0 34379 1 B A TTERY BOX PL ...
-
Tiger Products Co., Ltd JD 5520 - page 88
Parts Section 5-6 TRACTOR MOUNT KIT - MAIN FRAME, WOC, 5520 10-2-02 ...
-
Tiger Products Co., Ltd JD 5520 - page 89
Parts Section 5-7 TRACTOR MOUNT KIT - MAIN FRAME, WOC, 5520 ITEM PART NO. QTY. DESCRIPTION 1 34388 1 RESERVOIR TANK 2 34066 1 I N - T ANK FIL TER ASSY . 3 21627 4 NYLOCK NUTS 4 6T4197 1 PIPE PLUG 5 6T4200 3 PIPE PLUG 6 6T4201 2 PIPE PLUG 7 32262 1 MAIN FRAME 8 34404 1 AXLE BRACE RIGHT HAND 9 34403 1 AXLE BRACE LEFT HAND 1 1 TF4253LA 1 T R A V E L L ...
-
Tiger Products Co., Ltd JD 5520 - page 90
Parts Section 5-8 TRACTOR MOUNT KIT - FUEL T ANK, CAB, 5520 1 1-20-01 ...
-
Tiger Products Co., Ltd JD 5520 - page 91
Parts Section 5-9 TRACTOR MOUNT KIT - FUEL T ANK, CAB, 5520 ITEM PART NO. QTY. DESCRIPTION 1 34377 1 F U E L T A N K 2 34362 1 T ANK STRAP 3 31065 4 HOSE CLAMP 4 31064 1 FUEL HOSE 27” LONG 5 31058A 1 FILLER NECK 6 31 146A 1 NECK CLAMP 7 25391 1 FUEL CAP 8 21643 1 CAPSCREW 3/8” X 4 1/2” 9 22016 3 F L AT W ASHER 3/8” 1 0 27081 1 S P ACER 1 1 ...
-
Tiger Products Co., Ltd JD 5520 - page 92
Parts Section 5-10 TRACTOR MOUNT KIT - HYDRAULICS 5520 12-18-02 ...
-
Tiger Products Co., Ltd JD 5520 - page 93
Parts Section 5-11 ITEM PART NO. QTY. DESCRIPTION 2 34389 1 ELBOW 1 1/2”ORB X 32FLG 3 34309 1 BALL V AL VE 4 34655 1 ELBOW 1 1/2”ORB X 1 1/2MJ 6 34656 1 TEE,RUN, 1 1/4ORB x 1 1/4MJ x 1 1/4MJ 7 TF4431 2 FLANGE KIT #32 8 34382 1 HOSE 1 1/2” X 30” 1 0 TF4852 2 FLANGE KIT #20 1 1 TF4887 1 S TR EET ELBOW 12 6T0649 1 F I L TER GAUGE 1 3 3 4 1 15 ...
-
Tiger Products Co., Ltd JD 5520 - page 94
Parts Section 5-12 LIFT V A L VE - 4SP CAB 5520 10-2-02 ...
-
Tiger Products Co., Ltd JD 5520 - page 95
Parts Section 5-13 ITEM PART NO. QTY. DESCRIPTION 1 2741 1 1 V A L V E 2 6T1251 4 CABLE CONTROL BOX 3 24943 4 CABLE CONTROL 4 23865B 1 CABLE CONTROL ST AND 5 31297 1 DOUBLE SWITCH BOX 6 34267 1 V AL V E MOUNTING PLA TE 7 34360 1 V AL V E MOUNTING STRAP 8 6T3927 1 CONTINUOUS SOLENOID 9 6T3957 1 C I R C U I T B RE A K E R 1 1 6T441 1 4 CABLE CONTROL ...
-
Tiger Products Co., Ltd JD 5520 - page 96
Parts Section 5-14 LIFT V AL VE - 4SP WOC 5520 1 1-20-01 ...
-
Tiger Products Co., Ltd JD 5520 - page 97
Parts Section 5-15 ITEM PART NO. QTY. DESCRIPTION 1 2741 1 1 V A L V E 2 32429 1 V A L V E S T A N D 3 TB1017L 4 LEVER ASSY . 4 27400 1 SWITCH BOX 5 33367 1 HOSE 1/4” x 49” 6 34397 1 HOSE 1/4” x 109” 7 34399 2 HOSE 1/4” x 68” 8 34398 2 HOSE 1/4” x 90” 9 33746 3 HOSE 1/2” x 109”(1/2”FJ90x1/2”FJ) 10 6T3198 10 HOSE COVER 1 1 31 ...
-
Tiger Products Co., Ltd JD 5520 - page 98
Parts Section 5-16 DRAFT BEAM - RIGHT HAND 1 1-20-01 ...
-
Tiger Products Co., Ltd JD 5520 - page 99
Parts Section 5-17 ITEM PART NO. QTY. DESCRIPTION 1 32164 1 RIGHT HAND DRAFT BEAM 2 30481 1 INBOARD CYLINDER 3 32215 1 OUTBOARD CYLINDER 4 TF4500A 1 PIVOT ARM 5 TF4506B 1 LIFT ARM - LH 6 TF4507B 1 LIFT ARM - RH 7 30126B 2 PIN 8 6T3001 1 PIN 9 TF4519 2 PIN 10 6T3207 1 GREASE ZERK 1 1 6T321 1 4 GREASE ZERK 1 2 TB1033 3 CLEVIS PIN 1 3 06537021 6 R OLL ...
-
Tiger Products Co., Ltd JD 5520 - page 100
Parts Section 5-18 DRAFT BEAM - LEFT HAND 1 1-20-01 ...
-
Tiger Products Co., Ltd JD 5520 - page 101
Parts Section 5-19 ITEM PART NO. QTY. DESCRIPTION 1 32165 1 LEFT HAND DRAFT BEAM 2 30481 1 INBOARD CYLINDER 3 32215 1 OUTBOARD CYLINDER 4 TF4500A 1 PIVOT ARM 5 TF4506B 1 LIFT ARM - LH 6 TF4507B 1 LIFT ARM - RH 7 30126B 2 PIN 8 6T3001 1 PIN 9 TF4519 2 PIN 10 6T3207 1 GREASE ZERK 1 1 6T321 1 4 GREASE ZERK 1 2 TB1033 3 CLEVIS PIN 1 3 06537021 6 ROL L ...
-
Tiger Products Co., Ltd JD 5520 - page 102
Parts Section 5-20 HYDRAULIC COOLER - WOC 5520 1-3-02 ...
-
Tiger Products Co., Ltd JD 5520 - page 103
Parts Section 5-21 ITEM PART NO. QTY. DESCRIPTION 1 34374 1 COOLER ASSY * TF4619 AV A L COOLER * TF4614 AV A L COOLER COIL 2 32053 1 COOLER SHELF 3 30185A 4 CANOPY BRACKET - 2INSIDE, 2 OUTSIDE OF R.O.P .S. 4 32495 2 ROLL BAR BRACKET 5 32499 4 RE T AINING PLA TE 6 21741 4 CAPSCREW 1/2" X 4" 7 21743 4 CAPSCREW 1/2" X 5" 8 21990 1 ...
-
Tiger Products Co., Ltd JD 5520 - page 104
Parts Section 5-22 STEEL CANOPY - OPTIONAL ITEM P ART NO. QT Y . DESCRIPTION 1 6T6902A 1 STEEL CANOPY 2 28053 4.8' TRIM LOCK 3 31941 1 CANOPY BRACKET - LEFT HAND 4 31942 1 CANOPY BRACKET - RIGHT HAND 5 3 01 85 A 4 CANOPY BRACKET - 2 INSIDE, 2 OUTSIDE OF R.O.P .S. 6 32495 2 ROLL BAR BRACKET 7 32499 4 RE T AINING PLA TE 8 21730 6 CAPSCREW - 1/2& ...
-
Tiger Products Co., Ltd JD 5520 - page 105
Parts Section 5-23 ITEM PART NO. QTY. DESCRIPTION 1 34374 1 COOLER ASSY . * TF4619 AV A L COOLER * TF4614 AV A L COOLER COIL 2 34372 1 COOLER ST AND 3 34373 2 MOUNTING BRACKET 4 33260 1 ELBOW 1”MJ X 1”MOR 5 34375 1 HOSE 1” X 218” 6 34402 1 HOSE 1” X 238” 7 21632 6 CAPSCREW 3/8" X 1 1/2" 8 22016 8 F L AT W ASHER 3/8” 9 21627 ...
-
Tiger Products Co., Ltd JD 5520 - page 106
Parts Section 5-24 SOLENOID V AL VE SWITCH AND WIRING 12-12-02 ITEM P ART NO. QTY . DESCRIPTION 34522 A V A IL SWITCH BOX ASY (COMPLETE) 1 6T3923 1 INDICA TOR LIGHT 2 6T3924 1 FUSE HOLDER 3 6T3934 O PT . TEMPERA TURE GAUGE 4 6T3931 O PT . TEMPERA TURE SENSOR 5 6T3927 1 CONTINUOUS SOLENOID SWITCH 6 PT3905A 1 TOGGLE SWITCH, MOWER RUN 7 30260 1 TOGGLE ...
-
Tiger Products Co., Ltd JD 5520 - page 107
TRIPLE MOWER COMMON SECTION COMMON P ARTS SECTION Common Section 6-1 ...
-
Tiger Products Co., Ltd JD 5520 - page 108
Triple Gang Flail Common Section 6 - 2 T ABLE OF CONTENTS SECTION SPECIFIC P ARTS P AGE DRAFT BEAM - LEFT HAND 6 - 4 DRAFT BEAM - RIGHT HAND 6 -6 STD DUTY 63” SIDE DECK 6- 8 STD DUTY 75” SIDE DECK 6-12 STD DUTY SIDE FLAIL DRIVE ASSEMBL Y 6-16 HVY DUTY 75” SIDE DECK 6-18 HVY DUTY 90” SIDE DECK 6-22 HVY DUTY SIDE FLAIL DRIVE ASSEMBL Y 6-26 ST ...
-
Tiger Products Co., Ltd JD 5520 - page 109
Triple Gang Flail Common Section 6 - 3 The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this manual. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions ar ...
-
Tiger Products Co., Ltd JD 5520 - page 110
Triple Gang Flail Common Section 6 - 4 DRAFT BEAM - LEFT HAND ...
-
Tiger Products Co., Ltd JD 5520 - page 111
Triple Gang Flail Common Section 6 - 5 DRAFT BEAM - LEFT HAND ITEM PART NO. QTY. DESCRIPTION 1 30975B 1 LEFT HAND DRAFT BEAM 2 30481 1 INBOARD CYLINDER 3 25343 1 OUTBOARD CYLINDER 4 TF4500A 1 PIVOT ARM 5 TF4506B 1 LIFT ARM - LH 6 TF4507B 1 LIFT ARM - RH 7 TF4514A 2 PIN 8 TF4515 2 PIN 1 1/2” X 6 3/4” 9 TF4519 2 PIN 10 TF1033 2 GREASE ZERK 1/8” ...
-
Tiger Products Co., Ltd JD 5520 - page 112
Triple Gang Flail Common Section 6 - 6 DRAFT BEAM - RIGHT HAND ...
-
Tiger Products Co., Ltd JD 5520 - page 113
Triple Gang Flail Common Section 6 - 7 DRAFT BEAM - RIGHT HAND ITEM PART NO. QTY. DESCRIPTION 1 30974B 1 RIGHT HAND DRAFT BEAM 2 30481 1 INBOARD CYLINDER 3 25343 1 OUTBOARD CYLINDER 4 TF4500A 1 PIVOT ARM 5 TF4506B 1 LIFT ARM - LH 6 TF4507B 1 LIFT ARM - RH 7 TF4514A 2 PIN 8 TF4515 2 PIN 1 1/2” X 6 3/4” 9 TF4519 2 PIN 10 TF1033 2 GREASE ZERK 1/8? ...
-
Tiger Products Co., Ltd JD 5520 - page 114
Triple Gang Flail Common Section 6 - 8 STD DUTY 63” SIDE FLAIL, ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 115
Triple Gang Flail Common Section 6 - 9 STD DUTY 63” SIDE FLAIL, ST ANDARD ROT A TION ITEM P/N Q T Y DESCRIPTION 1 32433 1 BONNET ,63,STD,T3F ,RH (RIGHT FLAIL) 32224 1 BONNET ,63,STD,T3F ,LH (LEFT FLAIL) 2 2866 5A 1 BAFFLE,63,STD ROT -STD 3 6T2283 8 CARRIAGE BOL T ,3/8 X 1 NC 4 6T2615 8 WASHER,FENDER 3/8 5 21988 1 8 LOCKWASHER,3/8 6 21625 4 0 HEX ...
-
Tiger Products Co., Ltd JD 5520 - page 116
Triple Gang Flail Common Section 6 - 10 STD DUTY 63” SIDE FLAIL, REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 117
Triple Gang Flail Common Section 6 - 11 ITEM P/N Q T Y DESCRIPTION 1 32433 1 BONNET ,63,STD,T3F ,RH (RIGHT FLAIL) 32224 1 BONNET ,63,STD,T3F ,LH (LEFT FLAIL) 2 28969A 1 TRASH GUARD,63REV ROT -STD 3 6T2283 8 CARRIAGE BOL T ,3/8 X 1 NC 4 6T2615 8 WASHER,FENDER 3/8 5 21988 1 8 LOCKWASHER,3/8 6 21625 4 0 HEX NUT ,3/8 NC 7 27975A 1 GUARD,CUTTERSHAFT 5 8 ...
-
Tiger Products Co., Ltd JD 5520 - page 118
Triple Gang Flail Common Section 6 - 12 STD DUTY 75” SIDE FLAIL, ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 119
Triple Gang Flail Common Section 6 - 13 STD DUTY 75” SIDE FLAIL, ST ANDARD ROT A TION ITEM P/N Q T Y DESCRIPTION 1 06320109 1 BONNET ,75,STD,T3F ,R T (RIGHT FLAIL) 06320108 1 BONNET ,75,STD,T3F ,L T (LEFT FLAIL) 2 28737 1 BAFFLE,75,STD ROT -STD 3 6T2283 8 CARRIAGE BOL T ,3/8 X 1 NC 4 6T2615 8 WASHER,FENDER 3/8 5 21988 1 8 LOCKWASHER,3/8 6 21625 4 ...
-
Tiger Products Co., Ltd JD 5520 - page 120
Triple Gang Flail Common Section 6 - 14 STD DUTY 75” SIDE FLAIL, REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 121
Triple Gang Flail Common Section 6 - 15 STD DUTY 75” SIDE FLAIL REVERSE ROT A TION ITEM P/N Q T Y DESCRIPTION 1 06320109 1 BONNET ,75,STD,T3F ,R T (RIGHT FLAIL) 06320108 1 BONNET ,75,STD,T3F ,L T (LEFT FLAIL) 2 28969A 1 TRASH GUARD,63REV ROT -STD 3 6T2283 8 CARRIAGE BOL T ,3/8 X 1 NC 4 6T2615 8 WASHER,FENDER 3/8 5 21988 1 8 LOCKWASHER,3/8 6 21625 ...
-
Tiger Products Co., Ltd JD 5520 - page 122
Triple Gang Flail Common Section 6 - 16 STD DUTY SIDE FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 123
Triple Gang Flail Common Section 6 - 17 ITEM P/N Q T Y DESCRIPTION 1 RE F . * BONNET - REFER T O HEAD P ARTS 2 32287 1 RIGHT MOTOR MOUNT 32286 1 LEFT MOTOR MOUNT 3 21700 2 HEX NUT , 1/2", NF 4 TF3620A 1 SPRING ,TENSIONER 5 27938 1 BUSHING ,MACH,1ODx1/2IDx14GA. 6 40496 1 ROD,THREADED,1/2NFX8 7 PT361 1A 1 CLEVIS,6" 8 06504065 1 MOTOR (M350- ...
-
Tiger Products Co., Ltd JD 5520 - page 124
Triple Gang Flail Common Section 6 - 18 HEA VY DUTY 75” SIDE FLAIL, ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 125
Triple Gang Flail Common Section 6 - 19 HEA VY DUTY 75” SIDE FLAIL, ST ANDARD ROT A TION ITEM P/N Q TY DESCRIPTION 1 21499A 1 BONNET ,75,HD,T3F ,R T (RIGHT) 1 21478A 1 BONNET ,75,HD,T3F ,LF 2 TF1402A 1 BAFFLE,FLAIL,75HD,STD ROT TF1002A 1 CUTSHFT ASSY ,75HD,STD KNIVES 3 21677 4 0 NYLOCK NUT ,7/16 NC 4 33714 8 0 KNIFE,FLAIL,ST ANDARD 5 3401 1 4 0 C ...
-
Tiger Products Co., Ltd JD 5520 - page 126
Triple Gang Flail Common Section 6 - 20 HEA VY DUTY 75” SIDE FLAIL, REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 127
Triple Gang Flail Common Section 6 - 21 HEA VY DUTY 75” SIDE FLAIL REVERSE ROT A TION ITEM P/N Q TY DESCRIPTION 1 21499A 1 BONNET ,75,HD,T3F ,R T (RIGHT) 1 21478A 1 BONNET ,75,HD,T3F ,LF (LEFT) 2 TF1402A 1 BAFFLE,FLAIL,75HD (ST ANDARD ROT A TION ONL Y) TF1002A 1 CUTSHFT ASSY ,75HD,STD KNIVE 3 21677 4 0 NYLOCK NUT ,7/16 NC 4 33714 8 0 KNIFE,FLAIL, ...
-
Tiger Products Co., Ltd JD 5520 - page 128
Triple Gang Flail Common Section 6 - 22 HEA VY DUTY 90” SIDE FLAIL, ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 129
Triple Gang Flail Common Section 6 - 23 HEA VY DUTY 90” SIDE FLAIL, ST ANDARD ROT A TION ITEM P/N Q TY DESCRIPTION 1 22083A 1 BONNET ,90,HD,T3F ,RT (RIGHT) 1 22084A 1 BONNET 90” T3F (LEFT) 2 TF1502A 1 BAFFLE,FLAIL,90HD,STD ROT TF1 102A 1 CUTSHFT ASSY ,90HD,STD KNIVES 3 21677 4 8 NYLOCK NUT ,7/16 NC 4 33714 9 6 KNIFE,FLAIL,ST ANDARD 5 3401 1 4 8 ...
-
Tiger Products Co., Ltd JD 5520 - page 130
Triple Gang Flail Common Section 6 - 24 HEA VY DUTY 90” SIDE FLAIL, REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 131
Triple Gang Flail Common Section 6 - 25 HEA VY DUTY 90” SIDE FLAIL, REVERSE ROT A TION ITEM P/N Q TY DESCRIPTION 1 22083A 1 BONNET ,90,HD,T3F ,RT (RIGHT) 1 22084A 1 BONNET 90” T3F (LEFT) 2 TF1502A 1 BAFFLE,FLAIL,90HD (ST ANDARD ROT A TION ONL Y) TF1 102A 1 CUTSHFT ASSY ,90HD,STD KNIVES 3 21677 4 8 NYLOCK NUT ,7/16 NC 4 33714 9 6 KNIFE,FLAIL,ST ...
-
Tiger Products Co., Ltd JD 5520 - page 132
Triple Gang Flail Common Section 6 - 26 HEA VY DUTY SIDE FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 133
Triple Gang Flail Common Section 6 - 27 ITEM P/N Q T Y DESCRIPTION 1 * R E F BONNET - REFER T O FLAIL P ARTS 2 06504066 1 MOTOR 3 TF3040 2 SHEA VE,6.3 4 TF301 1 1 BUSHING ,QD,SK,2-3/16" 5 TF3013 1 BUSHING ,QD,SK 1-1/4"(RIGHT) 5 TF3013 1 BUSHING ,QD,SK 1-1/4"(LEFT) 6 TF4345 1 IDLER ARM (REVERSE ROT A TION / LEFT) 6 TF4346 1 IDLER ARM ...
-
Tiger Products Co., Ltd JD 5520 - page 134
Triple Gang Flail Common Section 6 - 28 STD DUTY 75” REAR FLAIL ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 135
Triple Gang Flail Common Section 6 - 29 ITEM P / N QT Y DESCRIPTION 1 06320134 1 BONNET ,75,STD,ROST A 2 21731 6 CAPSCREW ,1/2 x 1-1/2,NC 3 21990 6 LOCKWASHER,1/2 4 21725 6 HEX NUT ,1/2,NC 5 27975A 1 GUARD,CUTTERSHAFT 6 TF1029 2 BAR,FLAP ,TSF/TRF 75 7 06520242 1 FLAP ,75”,FRONT 8 21632 2 0 CAPSCREW ,3/8 x 1-1/2,NC 9 22016 8 1 F LA T W ASHER,3/8,G ...
-
Tiger Products Co., Ltd JD 5520 - page 136
Triple Gang Flail Common Section 6 - 30 STD DUTY 75” REAR FLAIL REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 137
Triple Gang Flail Common Section 6 - 31 75” REAR FLAIL REVERSE ROT A TION ITEM P / N QT Y DESCRIPTION 1 06320134 1 BONNET ,75,STD,ROST A 2 21731 8 CAPSCREW ,1/2 x 1-1/2,NC 3 21990 8 LOCKWASHER,1/2 4 21725 8 HEX NUT ,1/2,NC 5 27975A 1 GUARD,CUTTERSHAFT 6 06520242 1 FLAP ,75”,FRONT 7 21632 2 0 CAPSCREW ,3/8 x 1-1/2,NC 8 28968A 1 TRASH GUARD,75” ...
-
Tiger Products Co., Ltd JD 5520 - page 138
Triple Gang Flail Common Section 6 - 32 STD DUTY 90” REAR FLAIL ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 139
Triple Gang Flail Common Section 6 - 33 90” REAR FLAIL ST ANDARD ROT A TION ITEM P / N QT Y DESCRIPTION 1 063201 15 1 BONNET ,90,STD,ROST A 2 21731 6 CAPSCREW ,1/2 x 1-1/2,NC 3 21990 6 LOCKWASHER,1/2 4 21725 6 HEX NUT ,1/2,NC 5 27975A 1 GUARD,CUTTERSHAFT 6 TF 1 1 3 5 2 BAR,FLAP ,TSF/TRF 90 7 06520243 1 FLAP ,90”,FRONT 8 21632 2 0 CAPSCREW ,3/8 ...
-
Tiger Products Co., Ltd JD 5520 - page 140
Triple Gang Flail Common Section 6 - 34 STD DUTY 90” REAR FLAIL REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 141
Triple Gang Flail Common Section 6 - 35 90” REAR FLAIL REVERSE ROT A TION ITEM P / N QTY DESCRIPTION 1 063201 15 1 BONNET ,90,STD,ROST A 2 21731 8 CAPSCREW ,1/2 x 1-1/2,NC 3 21990 8 LOCKWASHER,1/2 4 21725 8 HEX NUT ,1/2,NC 5 27975A 1 GUARD,CUTTERSHAFT 6 06520243 1 FLAP ,90”,FRONT 7 21632 2 0 CAPSCREW ,3/8 x 1-1/2,NC 8 28967A 1 TRASH GUARD,90” ...
-
Tiger Products Co., Ltd JD 5520 - page 142
Triple Gang Flail Common Section 6 - 36 STD DUTY REAR FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 143
Triple Gang Flail Common Section 6 - 37 ITEM P / N QTY DESCRIPTION 1 * 1 BONNET - REFER T O CUTTER ASSEMBL Y 2 21727 2 NYLOCK NUT ,1/2,NC 3 21732 2 CAPSCREW ,1/2 x 1-3/4,NC 4 22018 4 F L A T W ASHER,1/2,WIDE 5 22421 R EF CAPSCREW ,16MM x 40MM(2.0P) 6 31956 R EF F L A T W ASHER,16MM,HARDENED 7 21731 2 CAPSCREW ,1/2 x 1-1/2,NC 8 32838 1 HEX NUT ,5/8- ...
-
Tiger Products Co., Ltd JD 5520 - page 144
Triple Gang Flail Common Section 6 - 38 STD DUTY PT O DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 145
Triple Gang Flail Common Section 6 - 39 STD DUTY PT O DRIVE ASSEMBL Y ITEM P / N QTY DESCRIPTION 1 06320134 1 BONNET ,75,STD,ROST A * 063201 15 A V AIL. BONNET ,90,STD,ROST A 2 064201 10 1 SHAFT ,OUTPUT ,TRF75 * 06420092 A V AIL. SHAFT ,OUTPUT ,TRF90 * 06420109 A V AIL. SHAFT ,OUTPUT ,TRF90(OFFSET) 3 06320133 1 TUBE,SAFETY ,75,SD * 063201 17 A V AI ...
-
Tiger Products Co., Ltd JD 5520 - page 146
Triple Gang Flail Common Section 6 - 40 HVY DUTY 75” REAR FLAIL ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 147
Triple Gang Flail Common Section 6 - 41 75” REAR FLAIL ST ANDARD ROT A TION ITEM P / N QT Y DESCRIPTION 1 22043J 1 BONNET ,75,HD 2 21732 2 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 2 6 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 2 6 F L A T W ASHER,3/8 8 TF1029 2 BAR,FLAP ,TSF ...
-
Tiger Products Co., Ltd JD 5520 - page 148
Triple Gang Flail Common Section 6 - 42 HVY DUTY 75” REAR FLAIL REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 149
Triple Gang Flail Common Section 6 - 43 75” REAR FLAIL REVERSE ROT A TION ITEM P / N QTY DESCRIPTION 1 22043J 1 BONNET ,75,HD 2 21732 3 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 2 6 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 2 6 F L A T W ASHER,3/8 8 TF1029 1 BAR,FLAP ,TSF/TR ...
-
Tiger Products Co., Ltd JD 5520 - page 150
Triple Gang Flail Common Section 6 - 44 HVY DUTY 75” REAR FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 151
Triple Gang Flail Common Section 6 - 45 75” REAR FLAIL DRIVE ASSEMBL Y ITEM P / N QTY DESCRIPTION 1 22043J 1 BONNET ,75,HD 2 31279A 1 HITCH,3-POINT 3 40454 2 S P ACER 4 27508 4 CAPSCREW ,8MMx20MM(1.25) 5 6T2619 8 L O CKWASHER,8MM 6 28447E 1 GUARD,OUTPUT SHAFT 7 28505 1 GEARBOX,REAR FLAIL,COMER T22A 8 06520181 1 GUARD,PTO,GRBX 9 34948 4 F L A TW A ...
-
Tiger Products Co., Ltd JD 5520 - page 152
Triple Gang Flail Common Section 6 - 46 HVY DUTY 90” REAR FLAIL ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 153
Triple Gang Flail Common Section 6 - 47 90” REAR FLAIL ST ANDARD ROT A TION ITEM P / N QT Y DESCRIPTION 1 22044J 1 BONNET ,90,HD 2 21732 2 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 3 0 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 3 0 F L A T W ASHER,3/8 8 TF 1 1 3 5 2 BAR,FLAP ...
-
Tiger Products Co., Ltd JD 5520 - page 154
Triple Gang Flail Common Section 6 - 48 HVY DUTY 90” REAR FLAIL REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 155
Triple Gang Flail Common Section 6 - 49 90” REAR FLAIL REVERSE ROT A TION ITEM P / N QT Y DESCRIPTION 1 22044J 1 BONNET ,90,HD 2 21732 3 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 3 0 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 3 0 F L A T W ASHER,3/8 8 TF 1 1 3 5 1 BAR,FLAP ,T ...
-
Tiger Products Co., Ltd JD 5520 - page 156
Triple Gang Flail Common Section 6 - 50 HVY DUTY 90” REAR FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 157
Triple Gang Flail Common Section 6 - 51 90” REAR FLAIL DRIVE ASSEMBL Y ITEM P / N QTY DESCRIPTION 1 22044J 1 BONNET ,90,HD 2 31279A 1 HITCH,3-POINT 3 40454 2 S P ACER 4 27508 4 C A P S C RE W ,8MMx20MM(1.25) 5 6T2619 8 LOCKWASHER,8MM 6 28447E 1 GUARD,OUTPUT SHAFT 7 28505 1 GEARBOX,REAR FLAIL,COMER T22A 8 06520181 1 GUARD,PTO,GRBX 9 34948 4 F L A ...
-
Tiger Products Co., Ltd JD 5520 - page 158
Triple Gang Flail Common Section 6 - 52 HVY DUTY 96” REAR FLAIL ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 159
Triple Gang Flail Common Section 6 - 53 96” REAR FLAIL ST ANDARD ROT A TION ITEM P / N QT Y DESCRIPTION 1 22045J 1 BONNET ,96,HD 2 21732 2 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 3 4 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 3 4 F L A T W ASHER,3/8 8 TF1606 2 BAR,FLAP ,TSF ...
-
Tiger Products Co., Ltd JD 5520 - page 160
Triple Gang Flail Common Section 6 - 54 HVY DUTY 96” REAR FLAIL REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 161
Triple Gang Flail Common Section 6 - 55 96” REAR FLAIL REVERSE ROT A TION ITEM P / N QTY DESCRIPTION 1 22045J 1 BONNET ,96,HD 2 21732 3 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 3 4 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 3 4 F L A T W ASHER,3/8 8 TF1606 1 BAR,FLAP ,TSF/TR ...
-
Tiger Products Co., Ltd JD 5520 - page 162
Triple Gang Flail Common Section 6 - 56 HVY DUTY 96” REAR FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 163
Triple Gang Flail Common Section 6 - 57 96” REAR FLAIL DRIVE ASSEMBL Y ITEM P / N QTY DESCRIPTION 1 22045J 1 BONNET ,96,HD 2 31279A 1 HITCH,3-POINT 3 40454 2 S P ACER 4 27508 4 C A P S C RE W ,8MMx20MM(1.25) 5 6T2619 8 LOCKWASHER,8MM 6 28447E 1 GUARD,OUTPUT SHAFT 7 28505 1 GEARBOX,REAR FLAIL,COMER T22A 8 06520181 1 GUARD,PTO,GRBX 9 34948 4 F L A ...
-
Tiger Products Co., Ltd JD 5520 - page 164
Triple Gang Flail Common Section 6 - 58 HVY DUTY 102” REAR FLAIL ST ANDARD ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 165
Triple Gang Flail Common Section 6 - 59 102” REAR FLAIL ST ANDARD ROT A TION ITEM P / N QT Y DESCRIPTION 1 22046J 1 BONNET ,102,HD 2 21732 2 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 3 6 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 3 6 F L A T W ASHER,3/8 8 TF1703 2 BAR,FLAP ,T ...
-
Tiger Products Co., Ltd JD 5520 - page 166
Triple Gang Flail Common Section 6 - 60 HVY DUTY 102” REAR FLAIL REVERSE ROT A TION ...
-
Tiger Products Co., Ltd JD 5520 - page 167
Triple Gang Flail Common Section 6 - 61 102” REAR FLAIL REVERSE ROT A TION ITEM P / N QTY DESCRIPTION 1 22046J 1 BONNET ,102,HD 2 21732 3 CAPSCREW ,1/2 x 1-3/4,NC 3 21990 2 2 LOCKWASHER,1/2 4 TF4335 1 ROD,GROUND ROLLER ADJ,LF 5 21725 2 2 HEX NUT ,1/2,NC 6 21632 3 6 CAPSCREW ,3/8 x 1-1/2,NC 7 22016 3 6 F L A T W ASHER,3/8 8 TF1703 1 BAR,FLAP ,TSF/ ...
-
Tiger Products Co., Ltd JD 5520 - page 168
Triple Gang Flail Common Section 6 - 62 HVY DUTY 102” REAR FLAIL DRIVE ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 169
Triple Gang Flail Common Section 6 - 63 102” REAR FLAIL DRIVE ASSEMBL Y ITEM P / N QTY DESCRIPTION 1 22046J 1 BONNET ,102,HD 2 31279A 1 HITCH,3-POINT 3 40454 2 S P ACER 4 27508 4 C A P S C RE W ,8MMx20MM(1.25) 5 6T2619 8 LOCKWASHER,8MM 6 28447E 1 GUARD,OUTPUT SHAFT 7 28505 1 GEARBOX,REAR FLAIL,COMER T22A 8 06520181 1 GUARD,PTO,GRBX 9 34948 4 F L ...
-
Tiger Products Co., Ltd JD 5520 - page 170
Triple Gang Flail Common Section 6 - 64 STD DUTY REAR GEAR BOX ASY (REAR ONL Y) ...
-
Tiger Products Co., Ltd JD 5520 - page 171
Triple Gang Flail Common Section 6 - 65 STD DUTY REAR GEAR BOX ASY (REAR ONL Y) ITEM P / N QTY DESCRIPTION 1 30133 1 CASING ,T4A GEARBOX 2 30134 1 CROWNWHEEL 230,T4A GEARBOX 3 30135 2 P ARALLEL KEY ,T4A GEARBOX 4 28604 1 BEARING 5 30136 2 OIL SEAL 6 30137 1 SHAFT 7 28603 2 SHIM 8 30138 1 PLUG 9 30139 1 BEARING ,30207 1 0 30140 1 S P ACER 1 1 30141 ...
-
Tiger Products Co., Ltd JD 5520 - page 172
Triple Gang Flail Common Section 6 - 66 HVY DUTY REAR GEAR BOX ASY (REAR ONL Y) ...
-
Tiger Products Co., Ltd JD 5520 - page 173
Triple Gang Flail Common Section 6 - 67 HVY DUTY REAR GEAR BOX ASY (REAR ONL Y) ITEM P / N QTY DESCRIPTION 1 28592 2 PLUG 1/2” GAS 2 28593 2 SNAP RING 3 28594 6 B O LT 8MM X 25MM 4 28595 1 SHIM 6 28597 2 BEARING 7 28598 1 GEAR 8 28599 1 P A R A LLELL KEY 9 28600 1 O I L F I L LER PUG 1 0 28601 1 SHAFT 1 1 28602 2 OIL SEAL 1 2 28603 1 SHIM 1 3 286 ...
-
Tiger Products Co., Ltd JD 5520 - page 174
Triple Gang Flail Common Section 6 - 68 PT O SHAFT ASSY (06520414) ITEM P / N QTY DESCRIPTION 06520414 R EF P T O,DRV SHFT ,TRF 1 00775353 2 Y O K E 1 -3/8"-6 SPL. 2 00189700 2 CROSS & BEARING KIT 3 00775317 1 INBOARD YOKE 1b 4 00756934 2 SPRING PIN 5 * 1 INNER PROFILE 1b 6 * 1 PROFILE & SLEEVE 7 00775318 1 INBOARD YOKE 2a 9 06505010 2 ...
-
Tiger Products Co., Ltd JD 5520 - page 175
Triple Gang Flail Common Section 6 - 69 PT O SHAFT ASSY WITH CLUTCH (06520415) ITEM P / N QTY DESCRIPTION 06520415 R EF P T O,DRV SHFT ,TRF ,CLUTCH 1 00775353 1 YOKE 1-3/8"-6 SPL. 2 00189700 2 CROSS & BEARING KIT 3 00775317 1 INBOARD YOKE 1b 4 00756934 2 SPRING PIN 5 * 1 INNER PROFILE 1b 6 * 1 PROFILE & SLEEVE 7 00775318 1 INBOARD YOKE ...
-
Tiger Products Co., Ltd JD 5520 - page 176
Triple Gang Flail Common Section 6 - 70 CLUTCH ASSY (00775365) ITEM PART NO. QTY. DESCRIPTION 00775365 - - CLUTCH ASSY 1 * 1 FLANGE YOKE 2 * 2 FRICTION DISC 3 * 1 HUB 4 * 1 THRUST PLA TE 5 * 1 BELLE VILLE SPRING 6 * 6 HEX BOL T 7 * 6 HEX LOCKNUT 8 * 1 BACK-UP RING 9 * 3 BALL 1 0 * 1 COMPRESSION SPRING 1 1 * 1 LOCK COLLAR 1 2 * 1 BACK-UP RING 1 3 * ...
-
Tiger Products Co., Ltd JD 5520 - page 177
Triple Gang Flail Common Section 6 - 71 P AGE INTENTIONALL Y LEFT BLANK ...
-
Tiger Products Co., Ltd JD 5520 - page 178
Triple Gang Flail Common Section 6 - 72 ITEM P ART NO. QTY . DESCRIPTION 06505044 A V A IL F IL TER ASSY SAE 10 MICRON 1 28583 4 C AP SCREW ,8MMX25MM(1.25 PITCH) 2 06505045 1 COVER 3 06505046 1 S E A L K I T 4 06505047 1 SPRING 5 06505048 1 B Y PAS S 6 35259 1 F IL TER,10 MIC,RETURN LINE 7 06505049 1 CAN/BODY RESER VOIR T ANK FIL TER ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 179
Triple Gang Flail Common Section 6 - 73 FRONT PUMP ASY ITEM P / N QTY DESCRIPTION TF4450 A V AIL FRONT MOUNTED PUMP P330 1 TF4459 1 CONTINENT AL SHAFT 2 TF4451 1 SNAP RING 3 TF4452 1 OUTBOARD BEARING 4 TF4467 1 BEARING RET AINER RING 5 TF4472 1 RET AINING RING 6 TF4473 1 S P ACER 7 TF4453 1 LIP SEAL 8 TF4454 1 SHAFT END COVER 9 TF4455 4 PLUG 10 TF4 ...
-
Tiger Products Co., Ltd JD 5520 - page 180
Triple Gang Flail Common Section 6 - 74 SIDE DECK MOTOR – HIGH PRESSURE ...
-
Tiger Products Co., Ltd JD 5520 - page 181
Triple Gang Flail Common Section 6 - 75 SIDE DECK MOTOR – HIGH PRESSURE ITEM P ART NO. QTY . DESCRIPTION * 06504066 A V AI L M O T O R ASSEMBL Y 350 - T3F 1 06504039 1 SHAFT END COVER 2 06504054 1 PORT END COVER 3 06504055 1 GEAR HOUSING 4 06504056 1 M A TCHED GEAR SET 5 TF4402 1 BALL BEARING 6 06504057 4 CAP SCREW 7 06504044 2 SET SCREW 9 065040 ...
-
Tiger Products Co., Ltd JD 5520 - page 182
Triple Gang Flail Common Section 6 - 76 SIDE DECK MOTOR – HIGH PRESSURE ...
-
Tiger Products Co., Ltd JD 5520 - page 183
Triple Gang Flail Common Section 6 - 77 ITEM P ART NO. QTY . DESCRIPTION * 06504013 A V AI L M O T O R ASSEMBL Y 350 - TSF 1 06504039 1 SHAFT END COVER 2 06504040 1 PORT END COVER 3 06504041 1 GEAR HOUSING 4 06504042 1 M A TCHED GEAR SET 5 TF4402 1 BALL BEARING 6 06504043 4 CAP SCREW 7 06504044 2 S E T S C R E W 8 06504028 1 K E Y 9 06504045 4 DOWE ...
-
Tiger Products Co., Ltd JD 5520 - page 184
Triple Gang Flail Common Section 6 - 78 HYDRAULIC LIFT CYLINDER ...
-
Tiger Products Co., Ltd JD 5520 - page 185
Triple Gang Flail Common Section 6 - 79 HYDRAULIC LIFT CYLINDER 3” X 10” CYLINDER #6T0151R ITEM P ART NO. QTY . DESCRIPTION 1 6T0167 1 CYLINDER BUTT 2 6T0170 1 CYLINDER GLAND 3 6T0178 1 CLEVIS END 4 6T0164 1 CYLINDER TUBE 5 6T0161 1 PISTON ROD 6 6T0173 1 PISTON 7 6T0179 1 LOCKNUT 8 6T0176 4 TIE ROD ASY 6T0187 AV A I L S E A L K I T 9 2 O - RING ...
-
Tiger Products Co., Ltd JD 5520 - page 186
Triple Gang Flail Common Section 6 - 80 HYDRAULIC LIFT CYLINDER ...
-
Tiger Products Co., Ltd JD 5520 - page 187
Triple Gang Flail Common Section 6 - 81 HYDRAULIC LIFT CYLINDER 3” X 12” CYLINDER # 32215 ITEM P / N QT Y DESCRIPTION 1 6T0167 1 CYLINDER BUTT 2 6T0170 1 CYLINDER GLAND 3 6T0178 1 CLEVIS END 4 6T0204 1 CYLINDER TUBE 5 6T0203 1 PISTON ROD 6 6T0173 1 PISTON 7 6T0179 1 LOCKNUT 8 6T0205 1 TIE ROD ASY 6T0187 A V A IL SEAL KIT 9 2 O - RING 1 0 2 BACK ...
-
Tiger Products Co., Ltd JD 5520 - page 188
Triple Gang Flail Common Section 6 - 82 4SP HUSCO V AL VE - LOAD SENSE (31 190) ...
-
Tiger Products Co., Ltd JD 5520 - page 189
Triple Gang Flail Common Section 6 - 83 4SP HUSCO V AL VE - LOAD SENSE (31 190) ITEM P ART NO. QT Y DESCRIPTION 1 31595 1 INLET END COVER 2 31594 1 END COVER, LOAD SENSE 3 31600 1 V ALVE SECTION (DOUBLE ACTING , DETENT - FLOA T) 4 31600 1 V ALVE SECTION (DOUBLE ACTING , DETENT - FLOA T) 5 31600 1 V ALVE SECTION (DOUBLE ACTING , DETENT - FLOA T) 6 3 ...
-
Tiger Products Co., Ltd JD 5520 - page 190
Triple Gang Flail Common Section 6 - 84 4SP HUSCO V AL VE - LOAD SENSE (06502046) ...
-
Tiger Products Co., Ltd JD 5520 - page 191
Triple Gang Flail Common Section 6 - 85 4SP HUSCO V AL VE - LOAD SENSE (06502046) ITEM P ART NO. QT Y DESCRIPTION 1 31595 1 INLET END COVER 2 31594 1 END COVER, LOAD SENSE 3 31600 1 V AL V E SECTION (DOUBLE ACTING , DETENT - FLOA T) 4 31600 1 V AL V E SECTION (DOUBLE ACTING , DETENT - FLOA T) 5 31600 1 V AL V E SECTION (DOUBLE ACTING , DETENT - FLO ...
-
Tiger Products Co., Ltd JD 5520 - page 192
Triple Gang Flail Common Section 6 - 86 COOLER ASSEMBL Y ...
-
Tiger Products Co., Ltd JD 5520 - page 193
Triple Gang Flail Common Section 6 - 87 COOLER ASSEMBL Y ITEM PART NO. QTY. DESCRIPTION 1 21530 1 0 CAPSCREW ,1/4 X1 NC 2 21986 1 0 LOCKWASHER,1/4 3 22014 1 0 F L A T W ASHER,1/4 4 35176 1 0 1/4 U-NUT 5 06370015 1 SCREEN,COOLER,FRNT 6 06380006 1 M N T ,COOLER,BUMPER T ANK,RH 7 06380007 1 M N T ,COOLER,BUMPER T ANK,LH 8 06510026 1 COOLER,FRONT MNT * ...
-
Tiger Products Co., Ltd JD 5520 - page 194
Triple Gang Flail Common Section 6 - 88 CASTER WHEEL REAR DECK ...
-
Tiger Products Co., Ltd JD 5520 - page 195
Triple Gang Flail Common Section 6 - 89 CASTER WHEEL REAR DECK ITEM P / N QTY DESCRIPTION 1 TF3060 2 CASTER WHL ARM,FLAIL 2 TF3052A 1 BRKT ,REAR CASTER ADJ,LF 3 6T2617 4 BUSHING ,MACH,1-1/2IDX 2-1/4OD 4 6T3014 2 ROLL PIN, 1/4" x 2" 5 TF3053 1 BRKT ,REAR CASTER ADJ,RT 6 21725 4 HEX NUT , 1/2" NC 7 21990 4 LOCKWASHER, 1/2" 8 21741 ...
-
Tiger Products Co., Ltd JD 5520 - page 196
Triple Gang Flail Common Section 6 - 90 ITEM P ART NO. QTY . DESCRIPTION * R E F * BONNET (REFER T O HEAD P ARTS) 2 30531A 1 BRACKET , TRA VEL LOCK 3 TF4248 1 P L A TE, TRA VEL LOCK 4 23745 1 T R A V E L LOCK HOOK 5 21783 2 CAPSCREW ,5/8”x2” NC 6 21992 2 LOCKWASHER, 5/8” 7 21775 2 HEX NUT , 5/8” NC 8 TF4250 1 PIN, TRA VEL LOCK SIDE FLAIL TR ...
-
Tiger Products Co., Ltd JD 5520 - page 197
Triple Gang Flail Common Section 6 - 91 SOLENOID BRAKE V AL VE ASSEMBL Y ITEM P / N QTY DESCRIPTION * 34115 AVAIL SOLENOID BRAKE VALVE ASSEMBLY - HIGH PRESSURE 1 34092 1 BRAKE VALVE, BLANK 2 34095 1 RELIEF VALVE, 3000 PSI 3 34094 2 LOGIC ELEMENT 4 34093 1 CARTRIDGE, 2 POSITION, 3 WAY (WITH NUT & WASHER) 5 34091 1 RELIEF VALVE, 2600 PSI 6 34689 ...
-
Tiger Products Co., Ltd JD 5520 - page 198
Triple Gang Flail Common Section 6 - 92 BRAKE V A L VE ASSEMBL Y W/ METRI P AK ITEM PART NO. QTY. DESCRIPTION 1 34092 1 BRAKE VALVE, BLANK 2 34094 2 LOGIC ELEMENT 3 34095 1 RELIEF VALVE, 3000 PSI 4 06510095 1 METRI PAK COIL 5 34093 1 CARTRIDGE, 2 POSITION, 3 WAY (WITH NUT & WASHER) 6 34091 1 RELIEF VALVE, 2600 PSI ...
-
Tiger Products Co., Ltd JD 5520 - page 199
Triple Gang Flail Common Section 6 - 93 SOLENOID BRAKE V A L VE HYDRAULIC SCHEMA TIC BRAKE V AL VE TROUBLESHOOTING F AILURE MODE: CHECK STEPS - MOWER WILL NOT ST AR T - system pressure is low (engine not lugging). 1 thru 6 - MOWER WILL NOT ST AR T - system pressure is high (engine lugging). “MR” port will be high pressure. 7 - MOWER WILL NOT RO ...
-
Tiger Products Co., Ltd JD 5520 - page 200
Triple Gang Flail Common Section 6 - 94 DECAL LOCA TION PB80068 ITEM P ART NO. QTY . DESCRIPTION 1 31522 6 DECAL, TIGER LOGO, 10” X 5.5” 2 22839 3 USE HAND GREASE GUN 3 N/A 3 SERIAL NUMBER PLA TE 4 6T3236 3 MADE IN U.S.A. 5 6T3249A 3 LUBE CUTTER SHAFT BEARING 6 6T3261 3 LUBE GROUND ROLLER BEARING 7 6T3240 1 USE SYNTHETIC GEAR LUBE 8 6T3217 18 K ...
-
Tiger Products Co., Ltd JD 5520 - page 201
Triple Gang Flail Common Section 6 - 95 SWITCHBOX SER VICE P ARTS ITEM P / N QTY . DESCRIPTION 1 0651401 1 1 SWBX,ALUM,BLK,06510097 2 35226 1 SWITCH,MOWER,COLEHERSEE 3 06510028 1 SWITCH,FORWARD/BRAKE/REV 4 3381 1 2 SWITCH,MASTER/DECK FLOA T 5 6T3923 2 INDICT A T OR LIGHT ,ON,RED 6 34540 2 S TRAIN RELIEF ,3/4,BLACK,NYLON 7 06514006 1 BREAKER,15A,SWB ...
-
Tiger Products Co., Ltd JD 5520 - page 202
Triple Gang Flail Common Section 6 - 96 SWITCHBOX SCHEMA TIC ...
-
Tiger Products Co., Ltd JD 5520 - page 203
Triple Gang Flail Common Section 6 - 97 PT O ST AND ITEM P ART NO. QTY . DESCRIPTION 1 06370080 1 BRACKET ,SUPPORT 2 06370022 1 SUPPORT , PTO 3 06520048 1 PIN, .5x2.5,BENT ,W/R-CLIP ...
-
Tiger Products Co., Ltd JD 5520 - page 204
Triple Gang Flail Common Section 6 - 98 ...
-
Tiger Products Co., Ltd JD 5520 - page 205
TRIPLE EGRESS SECTION Assembly Section 5-1 JD 52-5520 TRIPLE EGRESS ...
-
Tiger Products Co., Ltd JD 5520 - page 206
Assembly Section 5-2 TRIPLE EGRESS MOUNTING Park the tractor on a flat, hard, level surface. Lower both side decks down onto the hard surface. Make sure the engine is off and the park brake has been set. Operate the lift controls several times to release any pressure contained in the hydraulic lift system. Disconnect the positive battery cable from ...
-
Tiger Products Co., Ltd JD 5520 - page 207
Assembly Section 5-3 TRIPLE EGRESS MOUNTING CONTINUED ASSEMBL Y - TRIPLE EGRESS, CAB NOTE: Use the egress pump ONL Y to lif ting or lowering the head for storage, or transportation by trailer . When the egress pump is not in use make sure the switch box key is in the “off” position and key has been removed. ...
-
Tiger Products Co., Ltd JD 5520 - page 208
Assembly Section 5-4 EGRESS OPERA TION When operating the egress system to lift the deck, turn the key to the “DRAFT” position and push the rocker switch to the “LIFT” position and it will lift the draft beam. Once the draft beam is lifted to the highest position, then turn the key to the “DECK” position and push the rocker switch to th ...
-
Tiger Products Co., Ltd JD 5520 - page 209
Assembly Section 5-5 TRIPLE EGRESS TROUBLESHOOTING F AILURE MODE: CHECK STEPS - DECK OR DRAFT CYLINDER ONL Y GOES ONE W A Y . 1 and 2 - DECK OR DRAFT CYLINDER WILL NOT ST A Y IN POSITION. 1 and 2 - WILL OPERA TE WITH LIFT V AL VE, BUT NOT WITH EGRESS. 3 and 5 - EGRESS DOES NOT OPERA TE AS F AST AS IT USED TO. 3 and 4 CORRECTIVE STEPS: 1. Remove rel ...
-
Tiger Products Co., Ltd JD 5520 - page 210
Assembly Section 5-6 PUMP MOUNTING - TRIPLE EGRESS, CAB 9-1 1-02 ...
-
Tiger Products Co., Ltd JD 5520 - page 211
Assembly Section 5-7 ITEM PART NO. QTY. DESCRIPTION 1 06510066 1 EGRESS PUMP 2 34306 1 COVER FRONT HALF 3 34307 1 COVER REAR HALF 4 34361 1 MOUNTING BRACKET EGRESS 5 34124 1 MOUNTING BRACKET SWITCH BOX 6 34123 1 SWITCHBOX 7 6T3951 4 SCREW MACHINE 8-32UNC X 1/2” 8 34437 2 HOSE 1/4” x 64” 1/2ORB90 x 3/8ORB90 10 34440 1 HOSE 1/4” x 64” 1/2OR ...
-
Tiger Products Co., Ltd JD 5520 - page 212
Assembly Section 5-8 PUMP P ARTS - TRIPLE EGRESS, CAB ...
-
Tiger Products Co., Ltd JD 5520 - page 213
Assembly Section 5-9 PUMP P ARTS - TRIPLE EGRESS, CAB ITEM P/N Q T Y DESCRIPTION 1 06510067 1 MANIFOLD,EGRESS,HYTOST ,T3F 2 06510068 1 MOTOR,EGRESS,HYTOS,T3F 3 06510070 1 PUMP ,EGRESS,HYT OS,T3F 4 06510170 1 RELA Y ,06510066 5 06510171 1 HARNESS,06510066 6 06510172 4 COIL,06510066 7 06510173 2 S P ACER,06510066 8 06510174 2 SPOOL,06510066 9 0651017 ...
-
Tiger Products Co., Ltd JD 5520 - page 214
Assembly Section 5-10 SWITCH BOX P ARTS - TRIPLE EGRESS, CAB 8-29-02 ITEM P / N Q T Y DESCRIPTION 1 34934 1 BOTTOM BOX, EGREES SWITCH BOX 2 34933 1 TOP BOX, EGRESS SWITCHBOX 3 34937 1 KEY SWITCH, EGRESS SWITCH BOX 4 34936 1 10 AM P CKT BRKR, EGRESS SWITCH BOX 5 34935 1 ROCKER SWITCH, EGRESS SWITCH BOX 6 34938 1 ST RAIN RELIEF , EGRESS SWITCH BOX 7 ...
-
Tiger Products Co., Ltd JD 5520 - page 215
Assembly Section 5-11 TRIPLE EGRESS SCHEMA TIC ...
-
Tiger Products Co., Ltd JD 5520 - page 216
Assembly Section 5-12 ...
-
Tiger Products Co., Ltd JD 5520 - page 217
W ARRANTY SECTION Warranty Section 7-1 ...
-
Tiger Products Co., Ltd JD 5520 - page 218
. ...
-
Tiger Products Co., Ltd JD 5520 - page 219
W ARRANTY INFORMA TION T iger Corporation, 3301 N. Louise, Sioux Falls, South Dakota, warrant s to the original Retail Customer , the new T iger equipment is free of defects in material and workmanship. Any part of equipment that in T iger ’s judgement, show evidence of such defects will be repaired or replaced without charge, provided that the f ...
-
Tiger Products Co., Ltd JD 5520 - page 220
ONE LAST WORD This manual cannot possibly cover all of the potentially hazardous situations you will encounter . By being familiar with the safety rules, operating and maintenance instructions in this manual you can help prevent accidents. The objective of this manual is to help make you a better operator . Remember , SAFETY IS YOU! Y our safety an ...
-
Tiger Products Co., Ltd JD 5520 - page 221
T O THE OWNER / OPERA TOR / DEALER T o keep your implement running ef ficiently and safely , read your manual thoroughly and follow these directions and the Safety Messages in this manual and on the machine. The table of contents clearly identifies each section where you can easily find the information you need. The Occupational Safety and Health A ...
-
Tiger Products Co., Ltd JD 5520 - page 222
Printed in USA © T iger Corporation ...
Do you have a question concerning Tiger Products Co., Ltd JD 5520?
Use the form below
If you did not solve your problem by using a manual Tiger Products Co., Ltd JD 5520, ask a question using the form below. If a user had a similar problem with Tiger Products Co., Ltd JD 5520 it is likely that he will want to share the way to solve it.