English dropdown-ico

Manual Avocent 3016

112 pages 1.54 mb
Download

Go to site of 112

Summary
  • Avocent 3016 - page 1

    AUT O VIEW ® 3008/30 1 6 Installer/User Guide ...

  • Avocent 3016 - page 2

    USA Notification Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are desig ...

  • Avocent 3016 - page 3

    AutoV iew ® 3008/3016 Switch Inst aller/User Guide A vocent, the A vocent logo, The Po wer of Being There, AutoV iew , Dambrackas V ideo Compression and OSCAR are registered tr ademarks of A vocent Corpora tion or its affiliate s in the U.S. and other countries. All other marks are the property of their respective owners. © 2010 A vocent Corporat ...

  • Avocent 3016 - page 4

    Instruction s This symbol is intended to a lert the us er to th e presence of important operating and maintenance (servicing) instructions in the literat ure accompanying the applian ce. Dangerous V oltage This symbol is inte nded to alert t he user to the p r esence of uninsulated dange rous voltage within the product’ s enclosure that may be of ...

  • Avocent 3016 - page 5

    iii Table of Contents List of Figures ................ ................ ............. ................ ................ ................ ................. .. vii List of Tables ............... ................ ............. ................ ................ ................ ................ ..... .. ix Chapter 1: Product Overview .. ......... ..... ...

  • Avocent 3016 - page 6

    iv AutoView 3008/3016 Switch Installer/User Guide Controlling the status flag ........... .............. .............. .............. ............... .............. .............. .... .... 19 Setting the keyboard country code ..... ................................................................... ............ ........ 21 Configuring network set ...

  • Avocent 3016 - page 7

    Table of Contents v Managing AutoView switch configuration files . ...... ......................................................... ........ 56 Managing user databa ses ............... ............................ ............................ ............ ........... .......... .5 8 Configuring LDAP ..... .............. .............. ............. ...

  • Avocent 3016 - page 8

    vi AutoView 3008/3016 Switch Installer/User Guide The Console Menu ................... .............. ........... ... .............. .............. ............ .. .............. ........ ....... ..... 81 Network Configuration ....................... .............. .............. .............. ............ .............. .............. . ......... ...

  • Avocent 3016 - page 9

    vii List of Figures Figure 1.1: Example Switch Configuration (Auto Vie w 3016 Switch Shown) ................ ... .............. .. 2 Figure 2.1: Basic AutoView 3016 Switch Configuration . ............ ........................................... .......... 4 Figure 2.2: Typical AutoView 3008/3016 Switch Fire wa ll Con figuration ......... .......... ...

  • Avocent 3016 - page 10

    viii AutoView 3008/3016 Switch Installer/User Guide Figure 4.10: Versions Window ........ .............. .............. ............... .............. .............. .............. ...... ..... 52 Figure 4.11: AVRIQ Versions Window................... .............. .............. .............. .............. .............. ... 5 3 Figure 4.12: Upg ...

  • Avocent 3016 - page 11

    ix List of Tables Table 1.1: Descriptions for Figure 1.1 ................... ........... ... .............. .............. ........... ... .............. ..... 2 Table 2.1: Descriptions for Figure 2.1 ................... ........... ... .............. .............. ........... ... .............. ..... 5 Table 2.2: TCP Ports and Functions for the A ...

  • Avocent 3016 - page 12

    x AutoView 3008/3016 Switch Installer/User Guide ...

  • Avocent 3016 - page 13

    1 Product Overview Features and Benefit s Avocent AutoView 3008/ 3016 switches combi ne analog and digital techno logy to provide flexible control of data center servers, and to facilitate the OA&M (opera tions, activation and maintenance) of remote branch offices where trained operators may be unavailable. The AutoView 3008/30 16 switches prov ...

  • Avocent 3016 - page 14

    2 AutoView 3008/3016 Switch Installer/User Guide Access the AutoView 3008/3016 switch via a st andard TCP/IP network The Avocent AutoView 3008/3016 switches provide agentless remote control and access. No special software or drivers are required on the att ached, or client, computers. The client connects to the AutoView 3008/3016 switch using an In ...

  • Avocent 3016 - page 15

    3 CHAPTER 2 Installation AutoV iew 3008/3016 Sw itch Connectivity The AutoView 3008/3016 switching system transmits keyboard, video and mouse (KV M) information between operators and targ et devices attached to the switch. The AutoView 3008/3016 switch uses TCP/IP for communication ov er a network. Although 10BaseT Ethernet may be used, Avocen t re ...

  • Avocent 3016 - page 16

    4 AutoView 3008/3016 Switch Installer/User Guide Figure 2.1 illustrates a basic configuratio n for the AutoView 3016 switch. De scriptions follow in Table 2.1 . Figure 2.1: Basic AutoView 3016 Switch Configu ration 4 3 1 2 5 6 7 8 9 ...

  • Avocent 3016 - page 17

    Chapter 2: Installat ion 5 Getting st arted Before installing your AutoView 3008/ 3016 switch, refer to the following lists to ensure you hav e all items that shipped with the switch, as well as other items necessary for proper installation. Supplied with the AutoV iew 3008/3016 switch • Local country power cord • Rack mounting brackets • Rac ...

  • Avocent 3016 - page 18

    6 AutoView 3008/3016 Switch Installer/User Guide Rack Mounting an Auto V iew 3008/3016 Switch A rack mounting kit is supplied with each Auto View 3008/3016 sw itch. You may either place the AutoView 3008/3016 switch on the rack shelf or m ount the switch directly into an Electro nic Industries Alliance (EIA) standard rack. AutoView 3008/3016 switch ...

  • Avocent 3016 - page 19

    Chapter 2: Installat ion 7 1. Plug your monitor and either PS/2 or USB keyboard and mouse cabl e s in to the appropriat ely labeled ports on the AutoV iew switch. 2. Plug a compatible IQ or IAC module in to the appropriate ports on the back of the target server . 3. Choose an available numbered port on the rear of your A utoV iew 3008/3016 swi tch. ...

  • Avocent 3016 - page 20

    8 AutoView 3008/3016 Switch Installer/User Guide 3. In the Appliance Configuration me nu on th e left, click Appliance - Network and enter the appropriate Network Speed, Transmission Mode and Network Configuration settings for your network. T o connect a serial IQ module to a serial de vice : 1. Attach the serial IQ module 9-pin serial conn ector t ...

  • Avocent 3016 - page 21

    Chapter 2: Installat ion 9 NOTE: Ports 80 and 443 are configurable by the appliance administrator . In a typical configuration, as shown in Figure 2.2, the user’s computer is located outside of the firewall, and the Auto View 3008/301 6 switch resides inside the firewall. Figure 2.2: T ypical AutoView 3008/3016 Switch Firewall Configuration T o c ...

  • Avocent 3016 - page 22

    10 AutoView 3008/3016 Switch Installer/User Guide T o connect to the AutoVie w 3008/3016 switch OBWI from out side the firewall: Open a web browser and enter the external IP address of the firewall. The AutoView 3008/3 016 Explorer window will open and prompt you to log in. V erifying the Connections AutoView 3008/3016 switch The rear panel of the ...

  • Avocent 3016 - page 23

    Chapter 2: Installation 11 T o cascade multiple AutoView switches if your switch does not have an ACI port: 1. Connect an A VRIQ-PS/2 modu le to the local peripheral ports on the cascaded switch. 2. Using an appropriate length of CA T 5 cable, connect the A VRIQ-PS/2 modul e from step 1 to an available port on your 3008/3016 switch. 3. Repeat steps ...

  • Avocent 3016 - page 24

    12 AutoView 3008/3016 Switch Installer/User Guide ...

  • Avocent 3016 - page 25

    13 CHAPTER 3 Local Port Operation AutoView 3008/3016 switch users can access att ached devices via the OSCAR interface OSD or the OBWI. For information on the OBWI, see Chapter 4. Basic Operations Main Dialog Box Functions T o access the OSCAR interface Main dialog box: Press Print Screen to launch the OSCAR interface. The Main dialog box will appe ...

  • Avocent 3016 - page 26

    14 AutoView 3008/3016 Switch Installer/User Guide Viewing and selecting port s and servers Use the Main dialog box to view, configure and control target devi ces in the Auto View 3008/3016 switching system. Y ou may view the target devices by name, port or by the u nique Electronic ID (EID) embedded in each IQ module. You will s ee an OSCAR interfa ...

  • Avocent 3016 - page 27

    Chapter 3: Local Port Operation 15 Sof t switching Soft switching is the ability to switch target de vices using a hotkey sequen ce. You can soft switch to a target device by pressing Print Screen and then, depending on the method you’ve selected, typing the first few characters of it s nam e or number. If you have set a Screen Delay Time for the ...

  • Avocent 3016 - page 28

    16 AutoView 3008/3016 Switch Installer/User Guide Navigating the OSCAR interface This table describes how to navigate the OSCAR inte rface using the keyboard and mouse. T able 3.3: OSCAR Interface Navigati on Basics Keystroke Function <Print Screen>, Ctrl-Ctrl, Shif t-Shif t and/or Alt-Alt OSCAR interface activation sequence. By default, < ...

  • Avocent 3016 - page 29

    Chapter 3: Local Port Operation 17 Setup Dialog Box Functions You can configure your AutoView 3008/3 016 swit ching system from the Set up dialog box within the OSCAR interface. Select the Names butto n when initially setting up your Auto View 3008/3016 switching system to identify target devices by un ique names. Select the other setup features to ...

  • Avocent 3016 - page 30

    18 AutoView 3008/3016 Switch Installer/User Guide To access the OSCAR interface Setup dialog box, click Setup on the Main dialog box. Figure 3.2: OSCAR Interface Se tup Dialog Box Changing the display behavior Use the Menu dialog box to change the display or der of target devices, change how the OSCAR interface is invoked or set a Screen Delay Time ...

  • Avocent 3016 - page 31

    Chapter 3: Local Port Operation 19 -or- Select Port to displ a y target devices numerically by port num ber . 2. Click OK . Depending on the display m ethod selected, the correspond ing button will b e depressed in the Main dialog box. T o change how the OSC AR interface is invoked: 1. Select the checkbox next to one of the listed methods. 2. Click ...

  • Avocent 3016 - page 32

    20 AutoView 3008/3016 Switch Installer/User Guide Figure 3.4: OSCAR Interface Flag Dialog Box T o determine how the st atus flag is displayed: 1. Select Name or EID to determine what information will be di splayed. 2. Select Displayed to activate the flag display . After a swit ch, the flag will remain on the screen until the user switches to anoth ...

  • Avocent 3016 - page 33

    Chapter 3: Local Port Operation 21 Setting the keyboa rd country code NOTE: Using a keyboard code that supports a language different from that of your AutoView 3008/3016 switch firmware will cause incorrect keyboard mapping . Sun servers may use keyboard mappings for non-U S key boards. By default , the AutoView 3008/ 3016 switch sends the US keybo ...

  • Avocent 3016 - page 34

    22 AutoView 3008/3016 Switch Installer/User Guide 3. Reboot the Sun servers. After re booting, each Sun server will re quest the country code setting stored in the IQ module. NOTE: If you wish to reboot the target devices by pow er-cycling t hem, you must wait 90 seconds before rebooting. A soft reboot may be performed without waiting 90 second s. ...

  • Avocent 3016 - page 35

    Chapter 3: Local Port Operation 23 Figure 3.8: OSCAR Interface Devices D ialog Box When the AutoView 3008/3016 switch discov ers a cascaded switch, the numb ering format changes from an AutoView 3008/3016 port on ly to [AutoView 3008/3016 port]-[switch po rt] to accommodate each target device under that switch. For example, if a switch is connected ...

  • Avocent 3016 - page 36

    24 AutoView 3008/3016 Switch Installer/User Guide 4. Repeat steps 1-3 for each port requi ring a device type to be assigned. 5. Click OK in the Devices dialog box to save settings. NOTE: Changes made in the Device Modify dialog box are not saved to the switch until you click OK in the Devices dialog box. Assigning t arget device names Use the Names ...

  • Avocent 3016 - page 37

    Chapter 3: Local Port Operation 25 Figure 3.1 1: OSCA R Interface Name Modify Dialog Bo x 2. T yp e a name in the New Name box. Names of target devices may contain all printable characters. 3. Click OK to assign the new name. 4. Repeat steps 1-3 for each target device in the system. 5. Click OK in the Names dialog box to save your changes. -or- Cli ...

  • Avocent 3016 - page 38

    26 AutoView 3008/3016 Switch Installer/User Guide T o access the OSCAR interface Commands dialog box: Activate the OSCAR interface and click Comman ds to open the dialog box shown in Figure 3.12. Figure 3.12: OSCAR Interface Comman ds Dialog Box Selecting t arget devices for Scan mode The Scan dialog box allows the local user to define a custom lis ...

  • Avocent 3016 - page 39

    Chapter 3: Local Port Operation 27 Figure 3.13: Scan Dialog Box 2. T he dialog bo x contains a listin g of all servers attach ed to y ou r sw it ch . Click the checkbox to the right of the server , doub le-cl ick on the desired entry , or highlight the device and click the Add/ Remove button to toggle the scan checkbox setting . Y ou can select up ...

  • Avocent 3016 - page 40

    28 AutoView 3008/3016 Switch Installer/User Guide -or- From the Commands dialog box, deselect the Scan Enable checkbox. Viewing and disconnecting user connections You can view and disconnect users through the User Status dialog box. The username (U) and server (S) will always be displayed when connected to a target device (local or remote). You can ...

  • Avocent 3016 - page 41

    Chapter 3: Local Port Operation 29 Figure 3.15: OSCAR Interface Disconnec t Dialog Box 2. Click Disconnect to disconnect th e user and return to the User Status dialog box. -or- Click X or press Escape to exit the dialog box wi tho ut disconnecting a user . Displaying version informa tion and upgrading firmware For troubleshooting and support, the ...

  • Avocent 3016 - page 42

    30 AutoView 3008/3016 Switch Installer/User Guide Figure 3.16: OSCAR Interface V ersion Dialog Box 5. T o up grade individual IQ mo dules, click the A VRIQ button to vi ew individual A VRIQ mo dule version information. NOTE: T o upgrade multiple A VRIQ modu les simultaneously , go to step 9. Figure 3.17: A VRIQ Selection Dialog Box ...

  • Avocent 3016 - page 43

    Chapter 3: Local Port Operation 31 6. Select an A VRIQ module to view and click the V ersion button .. Figure 3.18: A VRIQ V ersion Dialog Box 7. Click the Load Firmware button. 8. Click OK to initiate the upgrade and return to the Status dialog box. NOTE: During an upgrade, the A VRIQ mo dule status indicator in the Main dialog box is yellow . T h ...

  • Avocent 3016 - page 44

    32 AutoView 3008/3016 Switch Installer/User Guide Figure 3.19: A VRIQ St at us Dialog Box 10. The A VRIQ Upgrad e dialog box displays. Click OK to initiate the upgrade and return to the A VRIQ Status dialog box. Returning an A VRIQ module to factory defa ult st atus: 1. Click AV R I Q in the V ersion dialog box. 2. Select an A VRIQ and click Decomm ...

  • Avocent 3016 - page 45

    Chapter 3: Local Port Operation 33 2. On the message box, click X or press Escape to exit without sending a Reset com mand to the target device. T o reset the local mouse and keyboard: 1. Activate the OSCA R interface and click Commands - Device Reset . A confirmati on message will appear . 2. Click X or press Escape to clear the message. ...

  • Avocent 3016 - page 46

    34 AutoView 3008/3016 Switch Installer/User Guide ...

  • Avocent 3016 - page 47

    35 CHAPTER 4 W eb Interface Operations AutoV iew 3008/3016 Switch OBWI In addition to the OSCAR interface, AutoView 300 8/3016 switches are equ ipped with an On-Board Web Interface (OBWI) feature that provides a built-in interface to handle all basic KVM switching needs. The AutoView 3008/3016 switch OBWI provides secu re “poi nt-and-click ” we ...

  • Avocent 3016 - page 48

    36 AutoView 3008/3016 Switch Installer/User Guide predefined global macros to perform acti ons with in the Vid eo Viewer window. For instructions on how to use the Video Viewer, see Chapter 5 . V iewing and Selecting Port s and Servers Before you can begin a KVM session, you must first log in to the AutoView switch OBW I. T o log in to the AutoV ie ...

  • Avocent 3016 - page 49

    Chapter 4: Web Interface Operations 37 Figure 4.1: Avocent AutoView 3016 Explorer Window T able 4.2: Descriptions for Figure 4.1 Number Description 1 Displays the IP address, appliance type and last six digits of the appliance MAC address and browser being accessed. 2 OBWI tabs used to display connections , status and configure the appliance. 3 Sho ...

  • Avocent 3016 - page 50

    38 AutoView 3008/3016 Switch Installer/User Guide Launching a KVM Session NOTE: When using a non-proxied c onnection, video performance over a sl ower network connection may be less than optimal. Since certain color settings (such as Gray scale) use less network bandw idth than others (such as Best Color), changing the color settings can increase v ...

  • Avocent 3016 - page 51

    Chapter 4: Web Interface Operations 39 Figure 4.2: Disconnect Session Status Window 2. Click the checkbox for one or more users that you wish to disconnect. 3. Click the Disconnect Session button. A message appears pr ompting you to con firm the disconnect command. 4. Click OK to disconnect the user . -or- Click Cancel to exit without comp leting t ...

  • Avocent 3016 - page 52

    40 AutoView 3008/3016 Switch Installer/User Guide • Whether an Administrator has configured global connection shari ng (A utomatic Sharing, Exclusive Connections and Stealth Connections all are configurable options that require sharing to be enabled) T o connect to ta rget devices when sharing is enabled: 1. Log into the OBW I as any user configu ...

  • Avocent 3016 - page 53

    Chapter 4: Web Interface Operations 41 • If an Administrator has enabled Exclusive Connectio ns, and a pri mary user has set Exclusive Mode for the session, you cannot sh are the sessi on unless you have Appliance Administra to r ri ghts. 5. If an Administrator has enabled Ex clusive Connections, you can click the Exclusive Mode option in the V i ...

  • Avocent 3016 - page 54

    42 AutoView 3008/3016 Switch Installer/User Guide Setting up u ser account s When you select the Users category, the OBWI will retrieve an d disp l a y a lis t of usernames and current access levels from the AutoView switch. Fr om here, you can add, modify or delete users and assign access levels. The User Administrator and Appliance Administrator ...

  • Avocent 3016 - page 55

    Chapter 4: Web Interface Operations 43 Figure 4.3: Users Window 2. Click the Add User butto n on the right side of the window to add a new user . -or- Click a username listed in the Users column to modify an existing user . The Add/Modi fy User window appears. Figure 4.4 : Add/Modif y User Wi ndow ...

  • Avocent 3016 - page 56

    44 AutoView 3008/3016 Switch Installer/User Guide 3. T yp e the username and password you wish to a ssign to the user and th en verify the password by typing it in the V erify Password field. Th e password must be 5-16 characters and contain alphabetical characters of mixe d case and at least one number . 4. Select the appropriate access le vel for ...

  • Avocent 3016 - page 57

    Chapter 4: Web Interface Operations 45 A Switch Administrator can specify the number of hours (1 to 99) th at accounts will remain locked. When Enable Lock-outs is unchecked , the Security Lock-out feature will be disabled and no users will be locked out. If an account becomes locked , it will remain locked until the duration time has elapsed, the ...

  • Avocent 3016 - page 58

    46 AutoView 3008/3016 Switch Installer/User Guide NOTE: After changing Network settings, the switch must be rebooted. NOTE: Users can view all appliance information, but only Administrators can change settings. The Sessions sub-category allows you to apply controls to your vide o sessio ns. Figure 4.5: Sessions Window Session time-out By enabling t ...

  • Avocent 3016 - page 59

    Chapter 4: Web Interface Operations 47 The Encryption opti on allows you to specify the type of encryption to b e used for video, keybo ard and mouse sessions. You can select multiple methods when a new client connection is req uested. The AutoView 3008/3016 switch negotiat es for the highest enabled encryption method . The Login Timeout option spe ...

  • Avocent 3016 - page 60

    48 AutoView 3008/3016 Switch Installer/User Guide T o configure general SNMP settings: 1. Click the Configu r e tab in the OBWI, then click the SNMP category in the left column. Figure 4.6: SN MP Window 2. Click the Enable SNMP ch eckbox to allow the Aut oV iew switch to respond to SNMP requests over UDP port 161. 3. T yp e the system’ s fu lly q ...

  • Avocent 3016 - page 61

    Chapter 4: Web Interface Operations 49 NOTE: After changing SNMP settings, the switch must be rebooted. See Rebooting the switch on page 56 for more information. Enabling individual SNMP traps An SNMP trap is a notification sent by the AutoView switch to a managemen t station indi cating that an event has o ccurred that may require fu rther attenti ...

  • Avocent 3016 - page 62

    50 AutoView 3008/3016 Switch Installer/User Guide Modifying a server name You can use the OBWI to rename a server from a remote workstation rather than from the OSCAR interface. Figure 4.8: Servers Window T o modify a server name : 1. Click the Configu r e tab in the OBWI, then click Servers-Cascade Devices in the left column. ...

  • Avocent 3016 - page 63

    Chapter 4: Web Interface Operations 51 2. In the Server Name column, clic k the server you want to mo dify . Figure 4.9: Modify Server Name Window 3. T yp e the new name. Nam es must be 1-15 charact ers, include alphabeti cal characters, and may not include spaces or special char acters with the ex ception of hy phens. 4. Click Save . The new name ...

  • Avocent 3016 - page 64

    52 AutoView 3008/3016 Switch Installer/User Guide T o configure a cascaded switch connection: 1. Click the Configu r e tab in the OBWI, then click Servers-Cascade Devices in the left co lumn. 2. Cli ck the name of the switch you want to configure and type the new name for the cascaded device. 3. T ype the number of channels , between 4-24, for the ...

  • Avocent 3016 - page 65

    Chapter 4: Web Interface Operations 53 A VRIQ versions The AVRIQ Versions sub-category allows you to view v ersion inform atio n for attached AVRIQ modules. Clicking on the EID displays a windo w that allows you to upgrade the IQ module firmware and to reset the IQ s if connected to a cascaded device. Selecting the Enable Auto-Upgrade for all IQ s ...

  • Avocent 3016 - page 66

    54 AutoView 3008/3016 Switch Installer/User Guide NOTE: PS/2, USB and USB2 IQ modules are available. In additi on, the AutoView switch is compatible with all Avocent IQ modules including Sun and serial IQ modules. NOTE: Resetting a n AutoView switch that is connected dire ctly to a server (not a cascaded switch) may cause the mouse/keyboard to fail ...

  • Avocent 3016 - page 67

    Chapter 4: Web Interface Operations 55 Figure 4.12: Upgrade Appliance F i rmware (T FTP Server) Window Figure 4.13: Upgrade Appliance F irmware (File System) Window T o upgrade A VRIQ module firmware: 1. Click the To o l s tab. ...

  • Avocent 3016 - page 68

    56 AutoView 3008/3016 Switch Installer/User Guide 2. Click the Upgrade A VRIQ Firmwar e button. 3. Select the module types you want to upgrade. 4. Click Upgrade . Rebooting the switch Periodically, such as after an upgrade, you may need t o reboot the Au toView 3008/3016 switch. You can reboot the switch through the Tools tab in the OBW I. When cli ...

  • Avocent 3016 - page 69

    Chapter 4: Web Interface Operations 57 Figure 4.14: Save Appliance Confi guration Window (File System) Figure 4.15: Save Appliance User Data Window (FTP Server) 3. (Optional) Enter and verify a passwo rd in the supplied fields. Thi s password is requested when you restore this database to an AutoV iew switch. Click Save . ...

  • Avocent 3016 - page 70

    58 AutoView 3008/3016 Switch Installer/User Guide NOTE: Y ou may leave the password field blank if you do not want to require a password for accessing the configuration file. 4. Navigate to a location to save the configuratio n file. The location appears in the Save T o field. 5. Click Save . 6. When complete, a message appears p rompting you to co ...

  • Avocent 3016 - page 71

    Chapter 4: Web Interface Operations 59 Figure 4.16: Restore Appliance User D at a (File System) Window Figure 4.17: Restore Appliance User D at a (FTP Server) Window 3. Click Br owse and navigate to the location where you stored the saved user database file. 4. Click Restore and enter the password you created when the user database was saved. Click ...

  • Avocent 3016 - page 72

    60 AutoView 3008/3016 Switch Installer/User Guide Configuring LDAP LDAP is a vendor-independent protocol standard used for accessing, querying and updating a directory using TCP/IP. Based on the X.500 Direct ory Services model, LDAP is a global directory structure that supports strong security features including aut hentication, privacy an d integr ...

  • Avocent 3016 - page 73

    Chapter 4: Web Interface Operations 61 T o configure LDAP server p arameters: 1. Select Configur e-Appliance-Au thentication-Server . 2. Identify the primary and secondary server a ddress, port and access type in the appropriate fields or radio buttons. 3. Click Save . LDAP Search p arameters On the LDAP Search page, you can configure th e paramete ...

  • Avocent 3016 - page 74

    62 AutoView 3008/3016 Switch Installer/User Guide each type of query has three modes that utilize certain types of info rmation to determine whether or not an LDAP user has access to an a ppliance or connected target devices. You can configure the following settings on the LDAP Query Page: • The Query Mode (Appliance) parameters dete rmine whethe ...

  • Avocent 3016 - page 75

    Chapter 4: Web Interface Operations 63 • Basic – A username and password query for the us er is made to th e dir ectory service. If they are verified, the user is given appliance administrator access to the appliance and any attached target devices for Query Mode (Appliance), or to any selected server fo r Qu ery Mode (Serve r). • User Attrib ...

  • Avocent 3016 - page 76

    64 AutoView 3008/3016 Switch Installer/User Guide identical to the attached targ et devices for querying target devices. The name must match exactly , including case. 5. The appliance names and target device names used for group queries are stored in the appliance. The appliance name specified in th e Applia nce Overview screen of the OBWI and targ ...

  • Avocent 3016 - page 77

    Chapter 4: Web Interface Operations 65 Figure 4.18: Install Web Server Certificate Window 3. Select the Fields radio button , and ent e r the fo llowing fields: • Public Key Length: the number of bits you want the certificate to be. • Common Name: your name. (Since thi s is your root certificate, use an appropriate name such as, "Company_N ...

  • Avocent 3016 - page 78

    66 AutoView 3008/3016 Switch Installer/User Guide 5. When prompted, cli ck to view the certificate and follow the instructions t o import the certificate into the Root Certifi cate Authority folder . After the cer tificate is stored, the user should not see the certificate warning. ...

  • Avocent 3016 - page 79

    67 CHAPTER 5 The V ideo V iewer The V ideo V iewer Window The Video Viewer is used to conduct a KVM sess ion with the target devices attached to an AutoView 3008/301 6 switch using th e OB WI. When yo u co nnect to a device using the Video Viewer, the target device desktop appears in a separate window containing both the local and the target device ...

  • Avocent 3016 - page 80

    68 AutoView 3008/3016 Switch Installer/User Guide Figure 5. 1: Vi deo Vi ewer Wi ndow (Norma l Wind ow Mode) T able 5.1: Descriptions for Figure 5.1 Number Description 1 T itle Bar: Displays the name of the server bei ng viewed. When in Full Screen mode, th e title bar disappears and the server name appears between the menu and toolbar . 2 Thumbtac ...

  • Avocent 3016 - page 81

    Chapter 5: The Video Viewer 69 Changing the toolbar You can choose the amount of elapsed time before the too lbar hides in the Video View er window when it is in show/hide state (that is , not locked in pla ce by the thumbtack). T o specify a toolbar hide time: 1. Select T ools - Session Options from the V ideo V iewer window menu. -or- Click the S ...

  • Avocent 3016 - page 82

    70 AutoView 3008/3016 Switch Installer/User Guide 2. Click the desired resolu tion. Adjusting the view Using menus or task butt ons in th e Video Viewer window , you can do the following: • Align the mouse cursors. • Refresh the screen. • Enable or disable Full Screen mode. When Full Screen mode is enabled, the image adjusts to fit the deskto ...

  • Avocent 3016 - page 83

    Chapter 5: The Video Viewer 71 The desktop window disappears and only the accessed device desktop is visible. The screen resizes up to a maxim um of 1024 x 7 68. If the desk top has a higher resolution, then a b lack background surrounds the full screen imag e. The floating toolbar appears. -or- To disable Full Screen mode, click the Full Screen Mo ...

  • Avocent 3016 - page 84

    72 AutoView 3008/3016 Switch Installer/User Guide 1. Select T ools - Manual V ideo Adjust from the V ideo V iewer window menu. -or- Click the Manual V id e o Adjust bu tton. The Manual Video Adjust dialog box appears. Figure 5.2 shows th e dialog box, and descriptions follow in Table 5.2 . Figure 5.2: Manual Video Adjust Dialog Box 2. Click the ico ...

  • Avocent 3016 - page 85

    Chapter 5: The Video Viewer 73 T arget video settings The Image Capture Width, Pixel Sam pling/Fine Adjust, Im age Capture Horizontal Po sition and Image Capture Vertical Position ad justments affect how the target video is captured and digitized and are seldom changed. The image capture parameters are automatically changed by the Automatic Adjustm ...

  • Avocent 3016 - page 86

    74 AutoView 3008/3016 Switch Installer/User Guide You can easily adjust your video parameters to ideal settings by clicking on the Auto Adjust Video button in the Manual Video Adjust dialog bo x. NOTE: Y ou can also select T ools - Automatic Video Adjust from the Video Viewer window menu or click the Automatic Video Adjust toolbar icon to automat i ...

  • Avocent 3016 - page 87

    Chapter 5: The Video Viewer 75 Figure 5.3: Video Viewer Window with Local and Remote Cursors Displayed The Cursor mode status of the Video Viewer window displays in th e title bar, including the keystroke that will exit Single Cursor mod e. Yo u can d efine the keystroke that will exit Single Cursor mode in the Session Opt ion s dialog box. NOTE: W ...

  • Avocent 3016 - page 88

    76 AutoView 3008/3016 Switch Installer/User Guide The Session Options dialog box appears. 2. Click the Mouse tab. 3. Select a terminating keystroke from the drop-down menu in the Si ngl e Cursor mod e area. 4. Click OK to save settings. When you enable Single Cursor mode, you can press the specified key to return to Regular Desktop mode. T o exit S ...

  • Avocent 3016 - page 89

    Chapter 5: The Video Viewer 77 a. Click the Custom radio button to enable the X and Y fields. b. Type a scaling value in the X and Y fields. For every mouse input , the mouse movements are multiplied by the respective X and Y scalin g factors. V alid inpu t range is 0.25-3.00 . V endor-specific video settings Video settings vary sign ifi cantl y am ...

  • Avocent 3016 - page 90

    78 AutoView 3008/3016 Switch Installer/User Guide T o specify keyboard p ass-through: 1. Select T ools - Session Options from the V ideo V iewer window menu. -or- Click the Session Options button. The Session Options dialog box appears. 2. Click the General tab. 3. Select Pass-thr ough all keystr okes in regular window mode . 4. Click OK to save se ...

  • Avocent 3016 - page 91

    Chapter 5: The Video Viewer 79 Closing a Video V iewer Window Session T o close a Video V i ewer window session: Select File - Exit from the V ideo Viewer windo w. ...

  • Avocent 3016 - page 92

    80 AutoView 3008/3016 Switch Installer/User Guide ...

  • Avocent 3016 - page 93

    81 CHAPTER 6 T erminal Operations The Console Menu Each AutoView 3008/3016 switch may al so be configured at the appliance level through the Console menu interface accessed through the 10 101 port. All terminal commands are accessed through a terminal or PC running termin al emu lation software. T o connect a terminal to the AutoV iew 3008/3016 swi ...

  • Avocent 3016 - page 94

    82 AutoView 3008/3016 Switch Installer/User Guide A static IP configuration may be used to provid e a user-defined IP address, netmask or prefix length, and default gateway for the AutoVi ew 3008/3016 switch . DHCP is a protocol that automates the configuration of TCP/IP-enabled comp uters. When DHCP is selected, the IP address, netmask or p refix ...

  • Avocent 3016 - page 95

    Chapter 6: Terminal Operations 83 Set Web Interface Port s Currently , the appliance and clie nt software are using ports 80 and 443 for HTTP and HTTPS port numbers respectively . Now the user will h ave th e abili ty to modify or specify alternate ports. Input Web Server Certificate This menu option allows the user to utilize the User Defined W eb ...

  • Avocent 3016 - page 96

    84 AutoView 3008/3016 Switch Installer/User Guide ...

  • Avocent 3016 - page 97

    85 Appendices Appendix A: Flash Upgrades The AutoView 3008/3016 switch Flash upgrade feature allo ws you to update your appliance with the latest firmware available. This update can be performed using a Trivial File Transfer Prot ocol (TFTP) server, File Transfer Pr otocol (FTP) or using the OBWI. After the Flash memory is reprogrammed with the upg ...

  • Avocent 3016 - page 98

    86 AutoView 3008/3016 Switch Installer/User Guide 10. The AutoV iew 3008/3016 switch will begin the Fl ash upgrade pro cess. On-screen ind icators will display the upgrade progress. When the upload is compl e te, th e AutoV iew 3008/3016 switch will reset and upgrade the intern al su bsystems. 1 1. The Console menu will display the follo wing messa ...

  • Avocent 3016 - page 99

    Appendices 87 Appendix B: Using Serial IQ Modules The serial IQ module is a serial -to-VGA converter that allows VT100-capable devices to be viewed from the AutoView 3008/3016 switch lo cal port or the OBW I. The actual serial data is not accessed, but is merely displayed. All s erial data coming from the target device is displayed in a VT100 windo ...

  • Avocent 3016 - page 100

    88 AutoView 3008/3016 Switch Installer/User Guide • Enter Sends: This option en ables you to sp ecify the keys that are transmitted when Enter is pressed. A vailable options are <CR> (Ent er), wh ich mov e s th e cursor to the left side of the screen, or <CR><LF> (Enter-Linef eed), which moves the cursor to the left side of the ...

  • Avocent 3016 - page 101

    Appendices 89 T o configure a serial IQ module: 1. Press Ctrl-F8 . The Configuration Screen will appear . 2. Select a parameter to change. Y ou can navigate the Configuration Screen using the Up Arrow and Down Arro w keys. 3. Modify the selected value using the Left Arro w and Right Arrow keys. 4. Repeat steps 2 and 3 to modify additional values. 5 ...

  • Avocent 3016 - page 102

    90 AutoView 3008/3016 Switch Installer/User Guide T o use History mode: 1. Press Ctrl-F9 . The mode will display as History . 2. Press one of the following key comb in ations to perform the indicated action: • Home : Move to the top of the buffer . • End : Move to the bottom of the buffer . • Page Up : Move up one buffer page. • Page Down : ...

  • Avocent 3016 - page 103

    Appendices 91 Appendix C: UTP Cabling This appendix discusses various aspects of conn ection media. The perfor mance of an AutoView 3008/3016 switchin g system depends on hig h quality connections. Poor quality or poorly installed or maintained cabling can diminish Aut oVi ew 3008 /3016 switching system performance. AutoView 3008/301 6 switching sy ...

  • Avocent 3016 - page 104

    92 AutoView 3008/3016 Switch Installer/User Guide Cabling inst allation, ma inten ance and safety tip s The following is a list of important safety considerat ions that should be reviewed prior to installi ng or maintaining your cables: • Keep all UTP runs to a maximum of 100 feet each. • Maintain the twists of the pairs all th e way to the poi ...

  • Avocent 3016 - page 105

    Appendices 93 Appendix D: T echnical Specifications T able D.1: AutoView 3008/3016 Switch Product Specifications Server Port s Number 16 - AutoView 3016 switch 8 - AutoView 3008 switch Ty p e PS/2, Sun, USB and Serial Connectors 8-pin modular Sync T ypes Separate horizontal and vertical Plug and Play DDC2B Video Resolution 640 x 480 @ 60 Hz 800 x 6 ...

  • Avocent 3016 - page 106

    94 AutoView 3008/3016 Switch Installer/User Guide Network Connection Number 1 Ty p e 10/100 Ethern et Connector 8-pin modular Local Port Number 1 Ty p e PS/2, USB a nd VGA USB Device Port Number 2 Ty p e USB 1.1 Power Supply Ty p e Internal Power 8.5 W Heat Dissipation 29 BTU/hr AC-input Range 100 - 240 V AC AC Frequency 50 - 60 Hz autosensing AC-i ...

  • Avocent 3016 - page 107

    Appendices 95 Appendix E: Sun Ad vanced Key Emulation Certain keys on a standard Type 5 (US) Sun keyboard can be emulated by key press sequences on a PS/2 keyboard. To enable Sun Advanced K ey Emulation mod e and use these keys, press and hold Ctrl+Shift+Alt and then press the Scroll Lock key. The Scroll Lock LED blinks. Use the indicated keys in T ...

  • Avocent 3016 - page 108

    96 AutoView 3008/3016 Switch Installer/User Guide For example: For Stop + A , press and hol d Ctrl+Shift+Alt and press Scroll L ock , then F1 + A . These key combinations will work with the serial USB IQ m odule (if your Sun sy stem comes with a USB port) as well as the Sun VSN and WSN IQ modules. With the exception of F12 , these key combinations ...

  • Avocent 3016 - page 109

    Appendices 97 Appendix F: T echnical Support Our Technical Support staff is ready to assist yo u wit h any instal lation or operating issues you encounter with your Avocent produ ct. If an issue should develo p, follow the steps belo w for the fastest possible service. T o resolve an issue: 1. Check the pertinent section of this manu al to s ee if ...

  • Avocent 3016 - page 110

    98 AutoView 3008/3016 Switch Installer/User Guide ...

  • Avocent 3016 - page 111

    ...

  • Avocent 3016 - page 112

    590-920-50 1 C For T echnical Support : www.avocent.com/support ...

Manufacturer Avocent Category Personal Computer

Documents that we receive from a manufacturer of a Avocent 3016 can be divided into several groups. They are, among others:
- Avocent technical drawings
- 3016 manuals
- Avocent product data sheets
- information booklets
- or energy labels Avocent 3016
All of them are important, but the most important information from the point of view of use of the device are in the user manual Avocent 3016.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Avocent 3016, service manual, brief instructions and user manuals Avocent 3016. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Avocent 3016.

Similar manuals

A complete manual for the device Avocent 3016, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Avocent 3016 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Avocent 3016.

A complete Avocent manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Avocent 3016 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Avocent 3016, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Avocent 3016, that we can find in the current document
3. Tips how to use the basic functions of the device Avocent 3016 - which should help us in our first steps of using Avocent 3016
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Avocent 3016
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Avocent 3016 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Avocent 3016?

Use the form below

If you did not solve your problem by using a manual Avocent 3016, ask a question using the form below. If a user had a similar problem with Avocent 3016 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)