English dropdown-ico

Manual NEC LCD2690WUXI

29 pages 4.3 mb
Download

Go to site of 29

Summary
  • NEC LCD2690WUXI - page 1

    MultiSync LCD2690WUXi SpectraV iew 2690 User ’ s Manual ...

  • NEC LCD2690WUXI - page 2

    Index W arning, Caution ............................................................................................................... ......... English-1 Declaration .................................................................................................................... .............. English-1 Canadian Department of Communications Co ...

  • NEC LCD2690WUXI - page 3

    English English-1 W ARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . T O FULL Y DISENGAGE THE POWER TO THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET .DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Th ...

  • NEC LCD2690WUXI - page 4

    English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specif ...

  • NEC LCD2690WUXI - page 5

    English English-3 Contents Y our new NEC monitor box* should contain the following: • MultiSync LCD2690WUXi or SpectraView 2690 monitor with tilt/swivel/pivot/height adjust stand • Power Cord (European Continental) • Power Cord (UK) •V ideo Signal Cable (15-pin mini D-SUB male to DVI-A) •V ideo Signal Cable (DVI-D to DVI-D cable) • User ...

  • NEC LCD2690WUXI - page 6

    English-4 Figure C.1 Figure C.2 Highest Stand Position Quick Start To attach the LCD monitor to your system, follow these instructions: 1. T urn off the power to your computer . 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system ( Figure A.1 ). T ighten all screws. For the ...

  • NEC LCD2690WUXI - page 7

    English English-5 Figure E.1 V acation Switch Power Button Figure C.3 Figure D.1 Figure D.2 Figure C.4 7. Hold all cables firmly and place the cable cover onto the stand ( Figure D.1 ). T o remove the cable cover , lift the cover off as shown in Figure D.2 . 8. Connect one end of the power cord to the AC inlet on the back of the monitor and the oth ...

  • NEC LCD2690WUXI - page 8

    English-6 Tilt Grasp top and bottom sides of the monitor screen with your hands and adjust the tilt as desired ( Figure TS.1 ). Figure TS.1 Swivel Grasp both sides of the monitor screen with your hands and adjust the swivel as desired ( Figure TS.2 ). NOTE: Handle with care when tilting the monitor screen. Figure TS.2 Screen Rotation Before rotatin ...

  • NEC LCD2690WUXI - page 9

    English English-7 Figure S.1 4. Place one hand around the base and one hand on the Quick Release Lever . Move the Quick Release Lever in the direction indicated by the arrows ( Figure S.2 ). 5. Lift up the bottom of the stand to unhook it from the monitor ( Figure S.3 ). The monitor can now be mounted using and alternate method. Reverse process to ...

  • NEC LCD2690WUXI - page 10

    English-8 Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press the EXIT button. To change signal input, press the INPUT/SELECT button. NOTE: OSM must be closed in order to change signal input. * The “LEFT/RIGHT” and “UP/DOWN” buttons functionality is interchangeable depe ...

  • NEC LCD2690WUXI - page 11

    English English-9 ECO MODE Decreases the amount of power consumed by reducing the brightness level. 1: Decreases the brightness by 25%. 2: Decreases the brightness by 50%. CUSTOM: Decreases the brightness level as determined by the user . Refer to the Advanced OSM menu for custom setting instructions. AUTO BRIGHTNESS There are three settings for Au ...

  • NEC LCD2690WUXI - page 12

    English-10 AUTO FINE (Analog input only) This function automatically and periodically adjusts the “FINE” setting for change in signal condition. This function adjusts approximately every 33 minutes. EXP ANSION Sets the zoom method. FULL: The image is expanded to 1920 x 1200, regardless of the resolution. ASPECT : The image is expanded without c ...

  • NEC LCD2690WUXI - page 13

    English English-11 VIDEO DETECT Selects the method of video detection when more than one computer is connected. FIRST : The video input has to be switched to “FIRST” mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port ...

  • NEC LCD2690WUXI - page 14

    English-12 OSM LOCK OUT This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. There are four types of OSM LOCK OUT : OSM LOCK OUT with BRIGHTNESS and CONTRAST control: T o activate the OSM Lock Out f ...

  • NEC LCD2690WUXI - page 15

    English English-13 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOUR MONIT OR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servici ...

  • NEC LCD2690WUXI - page 16

    English-14 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward ...

  • NEC LCD2690WUXI - page 17

    English English-15 Specifications Monitor Specifications MultiSync LCD2690WUXi and Notes SpectraView 2690 Monitor LCD Module Diagonal: 64.9 cm/25.5 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 64.9 cm/25.5 inches liquid crystal display (LCD); 0.287 mm dot Native Resolution (Pixel Count): 1920 x 1200 pitch; 400 cd/m 2 white ...

  • NEC LCD2690WUXI - page 18

    English-16 Features Ambix3 T echnology: T riple input technology allowing up to 3 input sources to be connected to a single monitor . The DVI-I connector supports both analog and digital input signals. Legacy analog input is supported using a traditional 15-pin VGA connector. Ambix3 provides traditional technology compatibility for analog as well a ...

  • NEC LCD2690WUXI - page 19

    English English-17 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check the V acation Switch should be in the ON position. • Front Power Switch and computer power switch should be in the ON position. • Check to make ...

  • NEC LCD2690WUXI - page 20

    English-18 Appendix If you need detailed information about the controls, please use the advanced menu. <How to use the advanced menu> •T urn of f your monitor . •T urn on your monitor by pushing the “POWER” and “INPUT/SELECT” button at the same time for at least one second simultaneously . Then press the control buttons (EXIT , LE ...

  • NEC LCD2690WUXI - page 21

    English English-19 T ag2 R-H.position Adjusts the position of the red component of the image. Press “Left” or “Right” to adjust. (Analog input only) G-H.position Adjusts the position of the green component of the image. Press “Left” or “Right” to adjust. (Analog input only) B-H.position Adjusts the position of the blue component of ...

  • NEC LCD2690WUXI - page 22

    English-20 H. Size Adjusts the horizontal size of the screen. (Analog input only) If the “AUTO Adjust function” do not give you a satisfactory picture setting, a further tuning can be performed using the “H.Size (V .Size)” function (dot clock). For this a Moiré test pattern could be used. This function may alter the width of the picture. U ...

  • NEC LCD2690WUXI - page 23

    English English-21 T ag6 Color Control Colour Control Systems: Seven preset colour settings. For preset settings 1, 2, 3 and 5, the following levels can be adjusted: TEMPERA TURE: Adjust the white temperature by increasing or decreasing this setting. A lower colour temperature will make the screen reddish and a higher colour temperature will make t ...

  • NEC LCD2690WUXI - page 24

    English-22 Over Drive T urns the OVER DRIVE function on or off. Over Drive may reduce blurring that occurs in some moving images. When Over Drive is on, response time is improved. Side Border Color Adjusts the side black bars colour between black and white. For wide aspect monitors. LED Brightness Controls the brightness of the LED on the monitor . ...

  • NEC LCD2690WUXI - page 25

    English English-23 Factory Preset Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. Highlighting the control to be reset and pressing the RESET button can reset individual settings. T ag9 Grayscale Mode This function changes the display image to monochrome. There are 3 types of settings. OFF: The Di ...

  • NEC LCD2690WUXI - page 26

    English-24 T agA T ile Matrix Tile Matrix demonstrates multiple screens. This feature provides a single large screen using up to 25 monitors. It will be able to divide up to 5 each H and V . This requires you to feed the PC output into each of the monitors through a distributor . ENABLE: Select “ON”, the monitor will expand the selected positio ...

  • NEC LCD2690WUXI - page 27

    English English-25 Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly . The purpose of this function is to make the ...

  • NEC LCD2690WUXI - page 28

    English-26 TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also m ...

  • NEC LCD2690WUXI - page 29

    English English-27 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent ...

Manufacturer NEC Category Computer Monitor

Documents that we receive from a manufacturer of a NEC LCD2690WUXI can be divided into several groups. They are, among others:
- NEC technical drawings
- LCD2690WUXI manuals
- NEC product data sheets
- information booklets
- or energy labels NEC LCD2690WUXI
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC LCD2690WUXI.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC LCD2690WUXI, service manual, brief instructions and user manuals NEC LCD2690WUXI. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC LCD2690WUXI.

Similar manuals

A complete manual for the device NEC LCD2690WUXI, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC LCD2690WUXI by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC LCD2690WUXI.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC LCD2690WUXI - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC LCD2690WUXI, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC LCD2690WUXI, that we can find in the current document
3. Tips how to use the basic functions of the device NEC LCD2690WUXI - which should help us in our first steps of using NEC LCD2690WUXI
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC LCD2690WUXI
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC LCD2690WUXI in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC LCD2690WUXI?

Use the form below

If you did not solve your problem by using a manual NEC LCD2690WUXI, ask a question using the form below. If a user had a similar problem with NEC LCD2690WUXI it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)