-
RCA VS2000 - page 1
User’ s Manual Free To Air Digital Satellite Receiver VS2000 ...
-
RCA VS2000 - page 2
1. SAFETY PRECAUTIONS 2. GENERAL FEATURES 3. HOW TO CONNECT YOUR RECEIVER 4. HARDWARE DESCRIPTION 5. SYSTEM SET-UP 6. MENU OPERATION 7. TROUBLE SHOOTING 8. TECHNICAL SPECIFICATIONS 9. PROGRAMING THE REMOTE CONTROL 4 5 6 8 12 14 29 30 32 T able of Contents ...
-
RCA VS2000 - page 3
Declaration of Conformity FCC Rule : TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT : FOR HOME OR OFFICE USE. FCC COMPLIANCE STATEMENT : This device complies with part 15 of the FCC rules. Operation is subject to the following conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interf ...
-
RCA VS2000 - page 4
GENERAL FEATURES 5 SAFETY PRECAUTIONS 4 This receiver has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully. MAIN SUPPLY : AC 95V~240V 50 / 60 Hz LOCATION : Locate the receiver indoor. Locate receiver away from potential hazards such as houseplants, lighting, raining ...
-
RCA VS2000 - page 5
HOW TO CONNECT YOUR RECEIVER 7 HOW TO CONNECT YOUR RECEIVER 6 Please DO NOT plug in the main power supply cord until you have finished all the connections. 1) LOCATION OF THE RECEIVER Your receiver should be placed under proper ventilation. Don t put in completely enclosed cabinet that will restrict the flow of air, Resulting overheating. The l ...
-
RCA VS2000 - page 6
HARDWARE DESCRIPTION 9 1) LNB IN : This port is to connect the coaxial cable from LNB of your Dish. The IF input is provided through this port and the input frequency range is 950 2150MHz. Also the voltage switching 13V and 18V is passed through this port. 2) IF OUT : To enable the connection of an analog receiver. The receiver is provided with ...
-
RCA VS2000 - page 7
10 11 HARDWARE DESCRIPTION HARDWARE DESCRIPTION 4. C. REMOTE CONTROL UNIT 15) LAST : This key is used to return to the previous channel. 16) AUDIO : This key is used to select the soundtrack list for the current service and also used to select audio mode. 17) PAUSE : This key is used to pause the screen. 18) SAT : This key is used to select the sat ...
-
RCA VS2000 - page 8
SYSTEM SET-UP 1 3 SYSTEM SET-UP 12 System Connection Power On Antenna Configuration Setting Automatic Channel Search Main Menu / Installation / Antenna Setup Connect the receiver to all peripheral devices. Turn on the power of the receiver and other devices. Select Main Menu/Installation / Antenna Setup using CH ? ...
-
RCA VS2000 - page 9
MENU OPERATION 1 5 MENU OPERATION 14 The main menu is classified into five sub menus which will carry out the various operation individually. 1. MAIN MENU After installing your dish system and receiver with appropriate connectors, plug in the AC main power and turn on the receiver. Press the MENU key of the RCU. You will see the Main Menu o ...
-
RCA VS2000 - page 10
MENU OPERATION 1 7 MENU OPERATION 16 3. EDIT FAVORITES You can edit the favorite channel list, such as add/delete a channel or move its position, which facilitates you to easily find your favorite channel from the favorite channel list. The favorite channel is classified into one of 8 favorite categories depending on its genre. Select Edit Favo ...
-
RCA VS2000 - page 11
4. INSTALLATION Installation menu helps you to setup a variety of parameters necessary for receiving signal, add new service, upgrade the new software and reset the channel data. Select Installation menu in main menu, and you will be asked to enter your PIN code. You can find the following Installation screen by entering it. ...
-
RCA VS2000 - page 12
MENU OPERATION 2 1 MENU OPERATION 20 4. B. 1 Channel Scan Select the desired satellite using the left/right keys ( ). Select the Antenna Configuration icon using the browse keys( ). Press OK key, and set LNB Power , LNB Type LNB Freq , 22KHz , Search O ...
-
RCA VS2000 - page 13
MENU OPERATION 2 3 MENU OPERATION 22 4. D. TIME SETTING You can change the time of your receiver and also switch on/off the timer function in this menu. Select “Time Settings” item in the “ Receiver Settings” menu and the following screen will be displayed. 4. E. RECEIVER UPGRADE You can upgrade the software of this receiver through serial ...
-
RCA VS2000 - page 14
MENU OPERATION 2 5 8. CHANNEL GUIDE Press GUIDE key, and the following screen will be displayed.It will give the titles of the current and next programmes on different channels. The information may include : current time / channel name, name of the current and next programme, the start and total time of the current programme, the start and ...
-
RCA VS2000 - page 15
On the live TV screen or paused TV screen, you can magnify some region of TV screen. Press “F4” key and the ZOOM box will be display. You can use following keys. - Up/Down/Left/Right keys ( ) : Move the ZOOM box - Page Up/Page Down keys ( , ) : Increase or decrease the ZOOM box - OK key ( ) : Watch the ZOOM box to full sc ...
-
RCA VS2000 - page 16
TECHNICAL SPECIFICATIONS 2 9 MENU OPERATION 28 7. TROUBLE SHOOTING Problem Does not display LED on the front panel or the receiver has no power. No pictures on the screen No sound Remote Control does not operate Poor picture quality Searching Signal Unrecognized smartcard Please insert your smartcard Solution - Connect the power cord to the power o ...
-
RCA VS2000 - page 17
TECHNICAL SPECIFICATIONS 30 5. Audio Decoder System Decoding Audio Mode Sampling Frequency 6. Audio/Video Output Audio Output Video Output Digital Audio S-Video COMPONENT 7. RF Modulator Modulator Output Video Type Output Connector Ant. IN Connector 8. Serial Data Interface Signal Connector Type 9. Embedded Descramble X Crypt Conditional Access Sys ...
-
RCA VS2000 - page 18
33 32 ...
-
RCA VS2000 - page 19
35 34 Brand List for T V Brand List for T V ...
Do you have a question concerning RCA VS2000?
Use the form below
If you did not solve your problem by using a manual RCA VS2000, ask a question using the form below. If a user had a similar problem with RCA VS2000 it is likely that he will want to share the way to solve it.