English dropdown-ico

Manual Magnavox VRC602MG

52 pages 0.77 mb
Download

Go to site of 52

Summary
  • Magnavox VRC602MG - page 1

    VC R VRC602MG V V ideo Cassette Recor ideo Cassette Recor der der Owner’ Owner’ s Manual s Manual ...

  • Magnavox VRC602MG - page 2

    This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance proble ...

  • Magnavox VRC602MG - page 3

    Introduction 3 Features • Automatic Channel Setup • Automatic Head Cleaner • Automatic Operation Features • Automatic Tracking Adjustment • Blue Background • Daylight-Savings Time • Display Panel • Front Panel Menu Access • Hi-Fi Stereo Sound System • High Quality (HQ) System • MTS (Multi-Channel Television Sound) System • 1 ...

  • Magnavox VRC602MG - page 4

    4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Using Your VCR . . . . . . . . . . . . . . . ...

  • Magnavox VRC602MG - page 5

    ● Use only tapes with the mark. ● Remove any light adhesive stick-on notes from the video cas- sette tape before putting the tape in the VCR. Removable labels can jam the VCR. ● The VCR requires periodic maintenance to maintain its excellent performance. This VCR has an Automatic Head Cleaner. However, you may have to replace the video heads ...

  • Magnavox VRC602MG - page 6

    OR 75 Ω ANT / CABLE OR 75 ANT / CABLE 6 Hookups Without a Cable Box/Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn ...

  • Magnavox VRC602MG - page 7

    CH 4 or CH 3 CH3 / CH4 Switch CH3 CH4 75 ANT / CABLE 75 Ω ANT / CABLE RF coaxial cable 3 Connect the supplied black RF coaxial cable to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.) 5 Set the CH3/CH4 switch on the ba ...

  • Magnavox VRC602MG - page 8

    8 Hookups With a Cable Box/Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: ● You may view any channel. ● You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. ● You may not view a channel other than the one you are recording. ● You may not program cha ...

  • Magnavox VRC602MG - page 9

    Hookups With a Cable Box/Direct Broadcast System (cont’d) 9 75 ANT / CABLE With this connection: ● You may watch one channel while recording another. ● You may not record scrambled channels. Recording One Channel/Watching Another 1 Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output ...

  • Magnavox VRC602MG - page 10

    10 Hookups with a Stereo TV ● Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. 3 Connect a stereo audio cable to the re ...

  • Magnavox VRC602MG - page 11

    1 Press the VCR button, then press the POWER button. The VCR light and the PWR.(power) light will appear on the VCR display panel. 2 Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCR. The display shown below will appear on the TV screen. (If the display does not appear, check your hookups, then follow the steps ...

  • Magnavox VRC602MG - page 12

    12 Automatic Channel Setup 1 Press the VCR button, then press the MENU button . SELECT op CHOOSE B → PROGRAM VCR SET UP TUNER SET UP SET CLOCK TO END PUSH EXIT • You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 001 or 002). When you select channel 001 or 002, AV REAR or AV FRONT will appear on the TV screen brief ...

  • Magnavox VRC602MG - page 13

    Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels If your channel lineup changes, you may want to add newly avail- able channels or remove channels that are no longer available in your area. You can use the CH(annel) o / p buttons to scroll through only the available channels. To add or delete channels from the VCR’s memory, follow t ...

  • Magnavox VRC602MG - page 14

    14 Automatic Channel Setup (cont’d) Reviewing Memorized Channels 3 Press the PLAY/ o button or the STOP/ p button to select CH MEMORY REVIEW, then press the F.FWD/ B button. A list of programmed channels will appear on the screen. ● If all the programmed channels don’t fit on the screen, press the F.FWD/ B button to see the remaining channels ...

  • Magnavox VRC602MG - page 15

    TIME 02 :15 PM MONTH – – / – – / – – TO CORRECT PUSH CLEAR TO END PUSH EXIT Setting the Clock 15 Follow the steps below to set your VCR’s clock. Make sure: ● The VCR is on and the VCR light appears on the display panel. (If it does not, press the VCR/TV button once.) ● You make each entry within 60 seconds of the previous entry. 4 ...

  • Magnavox VRC602MG - page 16

    1 Press the VCR button, then press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select SET CLOCK, then press the F.FWD/ B button. 4 Press the STATUS/EXIT button. SET CLOCK → SET CLOCK DAYLIGHT SVG TIME [ON] SELECT op CHOOSE B TO END PUSH EXIT SET CLOCK SET CLOCK → DAYLIGHT SVG TIME [ON] SELECT op CHOOSE B TO END PUSH EXI ...

  • Magnavox VRC602MG - page 17

    Language Selection 17 1 Press the VCR button, then press the MENU button . Follow the steps below to change the language of the on-screen displays and menus. 2 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button. 3 Press the PLAY/ o button or the STOP/ p button to select LANGUAGE, then press the F.FWD ...

  • Magnavox VRC602MG - page 18

    18 Setting the Remote to Operate a TV • The remote control may only operate some features of your TV. For exam- ple, the remote control may turn on the TV power, but it may not change channels at the TV. • If you can not change the channels at the TV using the Number buttons, press the ENTER button after you press the Number buttons. It may cha ...

  • Magnavox VRC602MG - page 19

    • The remote control may only operate some features of your Cable Box/DBS. For example, the remote control may turn off the Cable Box/DBS power, but it may not change channels at the Cable Box/DBS. • If you can not change the channels at the Cable Box using the Number buttons, press the ENTER button after you press the Number but- tons. It may ...

  • Magnavox VRC602MG - page 20

    20 Remote Control Buttons POWER EJECT VCR/TV SPEED TIME SEARCH SLOW ENTER 1 2 3 4 5 6 7 8 9 0 CH. VOL. MEMORY ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE VCR CBL/DBS TV MENU STATUS/EXIT CLEAR SPEED Button Press to select the recording speed (SP or SLP). Details are on pages 32 and 48. REC(ord)/OTR Button Press once to start a recording. D ...

  • Magnavox VRC602MG - page 21

    Remote Control Buttons (cont’d) 21 POWER EJECT VCR/TV SPEED TIME SEARCH SLOW ENTER 1 2 3 4 5 6 7 8 9 0 CH. VOL. MEMORY ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE VCR CBL/DBS TV MENU STATUS/EXIT CLEAR CLEAR Button Press to erase incorrect information when programming VCR functions. Also, press to reset the real-time counter. Details are ...

  • Magnavox VRC602MG - page 22

    MTS Broadcast Available Current tape status Time Counter, Counter Memory Tape Speed STOP 12:00 AM TV STEREO CH10 STEREO 2ND AUD SLP M 1:23:45 HIFI Channel SELECT op CHOOSE B → STATUS [ON] COUNTER ONLY [OFF] TO END PUSH EXIT 22 On-Screen Status Displays • You may not access a status display when viewing a still picture, during slow motion playba ...

  • Magnavox VRC602MG - page 23

    VCR Display Panel 23 Cassette Compartment Insert a tape here. VCR Light This light appears when the VCR is in VCR position. This light does not appear when the VCR is in TV position. Details are on pages 21 and 24. REC(ord) Light This light appears during a record- ing. It flashes when a recording is paused. Cassette-Inside Light This light appears ...

  • Magnavox VRC602MG - page 24

    24 Front Panel PAUSE Button While recording, press to pause the recording. Press again to resume recording. Details are on page 27. You can not pause a One-Touch Recording. During tape playback, press to freeze the picture. Press again to resume playback. Details are on page 38. POWER Button Press to turn the VCR power on and off. VCR/TV Button Pre ...

  • Magnavox VRC602MG - page 25

    AUDIO IN Jacks Connect the audio cables coming from the AUDIO OUT Jacks of a camcorder, another VCR, or an audio source here. Details are on page 34. VIDEO IN Jack Connect a video cable coming from the VIDEO OUT Jack of a camcorder, another VCR, or an audio-visual source (laser disc player, digital video disc player, etc.) here. Details are on page ...

  • Magnavox VRC602MG - page 26

    26 Playing • If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the dis- play panel. If it does not, press the VCR/TV button once.) Press the VCR button, then press the PLAY/ o button. • Other playback options and features are on pages 35-42. • If REP ...

  • Magnavox VRC602MG - page 27

    Read and follow the steps below to record a television program. 1 Turn on the TV and set it to channel 3 or 4 , whichever channel the CH3/CH4 switch on the back of the VCR is set to. Recording 27 2 Insert a tape with its record tab intact in the VCR. If playback begins, press the VCR button, then press the STOP/ p button to stop the tape. 3 If the ...

  • Magnavox VRC602MG - page 28

    2 Press the REC(ord)/OTR button to start a recording of the current channel. (See page 27.) The REC(ord) light will appear on the VCR display panel. 28 Recording One Channel/Watching Another • If you use a Cable Box or Direct Broadcast System, you may not be able to watch one channel while recording another. See pages eight- nine for details. • ...

  • Magnavox VRC602MG - page 29

    One-Touch Recording 29 1 Press the VCR button, then press the CH(annel) o / p but- tons or the Number buttons to select the channel you want to record. OTR (0:30) CH12 2 Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears on the screen. Recording will begin immediately. The REC(ord) light ...

  • Magnavox VRC602MG - page 30

    DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8- SELECT PROGRAM NUMBER TO END PUSH EXIT 30 Timer Recording Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin: ● Set up the channels at the VCR. Details are on pag ...

  • Magnavox VRC602MG - page 31

    ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON – – : – – TO CORRECT PUSH CLEAR TO END PUSH EXIT 6 Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. ONE TIME PROGRAM PROGRAM 1 CHA ...

  • Magnavox VRC602MG - page 32

    ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 SLP=2 TO CORRECT PUSH CLEAR TO END PUSH EXIT 32 Timer Recording (cont’d) 8 Press the Number 1 button to record in SP speed or the Number 2 button to record in SLP speed. (See the chart below.) You cannot use the SPEED button at this time. 9 Press two Numbe ...

  • Magnavox VRC602MG - page 33

    POWER EJECT VCR/TV SPEED TIME SEARCH SLOW ENTER 1 2 3 4 5 6 7 8 9 0 CH. VOL. MEMORY ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE VCR CBL/DBS TV MENU STATUS/EXIT CLEAR Timer Recording (cont’d) 33 6 Repeat steps 1-4 to make sure you have cleared the cor- rect timer recording. 1 With the VCR on and in VCR position (the VCR light will appear ...

  • Magnavox VRC602MG - page 34

    1 Make the connections shown above. 34 Rerecording (Tape Duplication) 3 VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.) 4 Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on V ...

  • Magnavox VRC602MG - page 35

    Repeat Play 35 Follow the steps below to make the VCR play a tape over and over. 1 Press the VCR button, then press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button. 4 Press the F.FWD/ B button so that ON appears beside REPEAT PLAY. 5 Press the STATUS/EXIT button. Now, when a tap ...

  • Magnavox VRC602MG - page 36

    • The MEMORY button does not function if REPEAT PLAY is ON. Details are on page 35. • To erase a real-time counter memo- ry, press the MEMORY button until the M disappears from the screen. • You may only set the real-time counter to zero at one location at a time. Setting the real-time counter to zero at a second location will erase the previ ...

  • Magnavox VRC602MG - page 37

    Time Search 37 Follow the steps below to program the VCR to search forward or backward on a tape a specific length of time. There must be a tape in the VCR. 1 Press the VCR button, then press the TIME SEARCH but- ton. 2 Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or back- ward. For example, ...

  • Magnavox VRC602MG - page 38

    38 Special Effects Playback Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/ B button or the REW(ind)/ { button. A fast forward or reverse picture search will begin. 2 To return to playback, press the PLAY/ o button. Super High Speed Searching (LP/SLP) 1 During tape playback, press the F.FWD/ B button o ...

  • Magnavox VRC602MG - page 39

    Automatic Operation Features 39 The following playback features will always operate. Automatic Playback When you put a tape in the VCR, the power will come on auto- matically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automati- cally when you insert a tape with the record tab ...

  • Magnavox VRC602MG - page 40

    40 Multi-Channel Television Sound System To record and play programs broadcast in stereo, even if you have a single-speaker TV, just use one of the connections shown, then follow the steps on pages 41-42. Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your VCR also can p ...

  • Magnavox VRC602MG - page 41

    6 Multi-Channel Television Sound System (cont’d) 41 1 Press the VCR button, then press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select TUNER SET UP, then press the F.FWD/ B button . 3 Press the PLAY/ o button or the STOP/ p button to select TV STEREO or 2ND AUDIO. Then, press the F.FWD/ B button . ON will appear to the ...

  • Magnavox VRC602MG - page 42

    42 Hi-Fi Stereo Sound System 1 Press the VCR button, then press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button . 3 Press the PLAY/ o button or the STOP/ p button to select AUDIO OUT, then press the F.FWD/ B button . Multi-Channel Television Sound system broadcasts are automatic ...

  • Magnavox VRC602MG - page 43

    POWER EJECT VCR/TV SPEED TIME SEARCH SLOW ENTER 1 2 3 4 5 6 7 8 9 0 CH. VOL. MEMORY ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE VCR CBL/DBS TV MENU STATUS/EXIT CLEAR 1 Press the VCR button, then press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button . 3 Press the PLAY/ ...

  • Magnavox VRC602MG - page 44

    If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information appears on the back of the ...

  • Magnavox VRC602MG - page 45

    You can not insert a tape. • Insert the tape, window side up, with the record tab facing you. • Make sure a tape isn’t already in the VCR by pressing the STOP/EJECT button on the VCR. • Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR. • If you have programmed a timer recording and the VC ...

  • Magnavox VRC602MG - page 46

    46 Limited Warranty VIDEO CASSETTE RECORDER or PLAYER 90 days Free Exchange / 91 days–One Year Reduced-Cost Exchange WHO IS COVERED? You must have proof of the date of purchase to exchange your product. A sales receipt or other document showing the date that you purchased the product is considered such proof. WHAT IS COVERED? Warranty coverage be ...

  • Magnavox VRC602MG - page 47

    Limited Warranty (cont’d) 47 If your product is defective, you may be able to exchange it at the store from which it was purchased. Most stores display a Return Policy. If not, ask the manager or sales associate how many days you have to exchange a product with them. After the store’s return period has expired, you may exchange the product with ...

  • Magnavox VRC602MG - page 48

    48 Glossary / Specifications Glossary AUDIO IN/OUT Jacks: jacks on the front and back of the VCR that record audio from another source (IN) or send audio to another system (OUT). Automatic Channel Setup: process in which the VCR mem- orizes all available channels. Then, when you press the CH(annel) o / p buttons, you only scan through channels you ...

  • Magnavox VRC602MG - page 49

    ac power cord .................................25 accessories .......................................52 alt.ch button .....................................21 ant(enna) in jack ...................6-10, 25 audio in/out jacks .................10, 24, 25, 34, 40, 48 automatic playback .......................................39 rewind, eject, off........ ...

  • Magnavox VRC602MG - page 50

    ...

  • Magnavox VRC602MG - page 51

    ...

  • Magnavox VRC602MG - page 52

    IB8265E001 Printed In China 0VMN02620 / H79J0UD * * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your VCR; they are provided to help you use or set up your VCR. The following additional items are not provided with your VCR, but they are designed for use with your new VCR. To order these optional accessor ...

Manufacturer Magnavox Category VCR

Documents that we receive from a manufacturer of a Magnavox VRC602MG can be divided into several groups. They are, among others:
- Magnavox technical drawings
- VRC602MG manuals
- Magnavox product data sheets
- information booklets
- or energy labels Magnavox VRC602MG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Magnavox VRC602MG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Magnavox VRC602MG, service manual, brief instructions and user manuals Magnavox VRC602MG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Magnavox VRC602MG.

Similar manuals

A complete manual for the device Magnavox VRC602MG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Magnavox VRC602MG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Magnavox VRC602MG.

A complete Magnavox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Magnavox VRC602MG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Magnavox VRC602MG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Magnavox VRC602MG, that we can find in the current document
3. Tips how to use the basic functions of the device Magnavox VRC602MG - which should help us in our first steps of using Magnavox VRC602MG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Magnavox VRC602MG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Magnavox VRC602MG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Magnavox VRC602MG?

Use the form below

If you did not solve your problem by using a manual Magnavox VRC602MG, ask a question using the form below. If a user had a similar problem with Magnavox VRC602MG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)