English dropdown-ico

Manual Epson LQ-300

13 pages 0.64 mb
Download

Go to site of 13

Summary
  • Epson LQ-300 - page 1

    EPSON LQ-300 / switch Character fonts: n----7 paper supports amsuifo 0 Couriers 0 Printer Specifications Printing Print method: 24-pin impact dot matrix Print speed: I 12 I 240 J is 300 10 67 12 60 Le4terQuatity 1 l I 15 I 100 I The paper-thidoress lever posltbn or an oveftmmd Pttnt head may slowdcwnthephtiarg~. Printing direction: Bidirectional lo ...

  • Epson LQ-300 - page 2

    EPSON LQ-300 Note: Use recycled paper under normal conditions only. If ribbon consumption or paper jamming increase, use a higher grade of paper Labels: size: Thickness: Weight: Envelopes: size: ThiCkMSS: Weight 101 to 254 mm (4.0 to 10.0 inches) width for backing sheet 63.5 x 23.8 mm (2.50 x 0.94 inches) minimum for a label 0.07 to 0.09 mm (0.0028 ...

  • Epson LQ-300 - page 3

    EPSON LQ-300 Environmental Temperature: Operation: 5 to 35OC (41 to 95°F) Operation (film ribbon): 15 to 35OC (59 to 95OF) Operation (envelopes, labels, or recycled paper): 15 to 25OC (59 to 77OF) Storage: -20 to 55OC (-4 to 13lOF) Humidity (without condensation): Operation: 5 to 80% RH Operation (film ribbon): lOtow%RH Operation (envelopes, label ...

  • Epson LQ-300 - page 4

    EPSON LQ-300 Lights and buttons Pause Light The orange Pause light is on when the printer stops printing. Each time you turn on the printer, the light flashes briefly. When the printer is out of paper, the light flashes and the beeper sounds three times. The light also flashes when you can tear off the last sheet of continuous paper at the edge of ...

  • Epson LQ-300 - page 5

    EPSON LQ-300 l Incerteinareas,Ulefdlowing~ertaM~,are~e: Pc437, Pc050, Pc864, Pu37GLeek, Pc8s2,Pctl53, Pcass, Pc857, PO866, PC869, IS0 Latin IT, IS0 88597, code MJK, MAZOWIA, Bulgaria Note: Because @ware settings always ommide the printer0 dejblt settings, use your sojbare program to control the printer, if possible. See your @ware documentatim~ mor ...

  • Epson LQ-300 - page 6

    EPSON LQ-300 Changing the printer settings If you cannot use your software program to change the printer’s settings, you can use the Printer Setting mode. Here’s how: El Caution: To print the help text, use paper at least 210 mm (8.3 inches) 1. 2. w&for single Sheets or 240 kn (9.5 inches) for wntinuous~ paper; otherwise the print heud prin ...

  • Epson LQ-300 - page 7

    EPSON LQ-300 Installing the Ribbon Cartridge Before installing the ribbon cartridge, make sure the printer is turned off. 1. Open the printer cover to the upright position+ then pull it up to remove it. 0 wathg: Never moue the print head while the printer is turned on; this can damage the printer. Also, if you have just used the printer, let the pr ...

  • Epson LQ-300 - page 8

    EPSON LQ-300 1. Make sure the printer is turned off and the paper-release lever is pushed back to the single-sheet position. Raise the 4. Slide a sheet of paper down firmly between the edge paper guide upright. guides until it meets resistance. The printer loads the sheet automatically. While hokling down the LF/FF button turn on the printer. Relea ...

  • Epson LQ-300 - page 9

    EPSON LQ-300 4. From the list of printers box, select LQ-300. If it is not available, choose the first available printer from the following list. If you plan to use color, you must choose either ActionPrinter 3260, LQ-150, LQ-860, LQ-2550. The other printers cannot use color. ActionPrinter~ 3260 LQ-870 LQ-150 ActionPrinter 3250 w-860 Any LQ printer ...

  • Epson LQ-300 - page 10

    EPSON LQ-300 2. Release the sprocket units by pulling the sprocket locks forward. 3. Slide the left sprocket unit using the scale on the printer as a guide. The printer prints to the right of the position marked 0. Rush the sprocket lock lever back to lock it in place. Then slide the right sprocket unit to match the width of your paper, but do not ...

  • Epson LQ-300 - page 11

    EPSON LQ-300 Switching back to single sheets To switch to single sheets, press the Font and LF/FF buttons ’ at the same time; the printer feeds the paper backward into the paper-park position. ca Caution: Always tear off paper before back-feeding; back-feeding too many sheets can cause a paper jam. Printing in the pull tractor position To load co ...

  • Epson LQ-300 - page 12

    EPSON LQ-300 7. Make sure your paper has a clean, straight leading edge. Open the sprocket covers. Fit the first holes of the paper over the sprocket pins and then close the sprocket covers. Slide the right sprocket unit to remove any slack in the paper and lock it in place. n To separate the incoming paper from the printed paper, attach the paper ...

  • Epson LQ-300 - page 13

    EPSON LQ-300 5. Turn the ribbon-tightening knob in the direction of the arrow to remove any slack in the ribbon. 6. Insert the ribbon cartridge into the printer as shown; then press both sides of the cartridge firmly to fit the plastic hooks into the printer slots. 7. Turn the ribbon-tightening knob to help feed the ribbon into place; it should not ...

Manufacturer Epson Category Printer

Documents that we receive from a manufacturer of a Epson LQ-300 can be divided into several groups. They are, among others:
- Epson technical drawings
- LQ-300 manuals
- Epson product data sheets
- information booklets
- or energy labels Epson LQ-300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson LQ-300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson LQ-300, service manual, brief instructions and user manuals Epson LQ-300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson LQ-300.

Similar manuals

A complete manual for the device Epson LQ-300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson LQ-300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson LQ-300.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson LQ-300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson LQ-300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson LQ-300, that we can find in the current document
3. Tips how to use the basic functions of the device Epson LQ-300 - which should help us in our first steps of using Epson LQ-300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson LQ-300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson LQ-300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson LQ-300?

Use the form below

If you did not solve your problem by using a manual Epson LQ-300, ask a question using the form below. If a user had a similar problem with Epson LQ-300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)