English dropdown-ico

Manual Pelco IPSXM30CBW23-7X

48 pages 1.25 mb
Download

Go to site of 48

Summary
  • Pelco IPSXM30CBW23-7X - page 1

    ExSite ™ Series Explosionproof Positioning System OPERATION/PROGRAMMING C1300M-B (6/05) ...

  • Pelco IPSXM30CBW23-7X - page 2

    ...

  • Pelco IPSXM30CBW23-7X - page 3

    C1300M-B (6/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Pelco IPSXM30CBW23-7X - page 4

    4 C1300M-B (6/05) Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Enable Motion Detection (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Pelco IPSXM30CBW23-7X - page 5

    C1300M-B (6/05) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE Thi ...

  • Pelco IPSXM30CBW23-7X - page 6

    6 C1300M-B (6/05) W elcome Thank you for purchasing Pelco’ s ExSite™ IPSXM Series explosionproof positioning system. Y our new system features a high resolution, camera/optics package with programmable software. This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information abo ...

  • Pelco IPSXM30CBW23-7X - page 7

    C1300M-B (6/05) 7 How to Operate Y our System Operation How to Control Pan and T ilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far , do the following: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. 2. Release the button or joystick for one second. 3. T o ...

  • Pelco IPSXM30CBW23-7X - page 8

    8 C1300M-B (6/05) ACCESSING MAIN MENU (PRESET 95) Y ou can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for vari ...

  • Pelco IPSXM30CBW23-7X - page 9

    C1300M-B (6/05) 9 Quick Start Guide – System Setup Quick Programming Guide Access the main menu (preset 95). See the Accessing Main Menu (Preset 95) section. Use the joystick to position the cursor beside menu selection. If your controller does not have a joystick, use the up or down key. Press Iris Open; the submenu/cursor moves to the right. Mo ...

  • Pelco IPSXM30CBW23-7X - page 10

    10 C1300M-B (6/05) ...

  • Pelco IPSXM30CBW23-7X - page 11

    C1300M-B (6/05) 11 Quick Programming Guide (See Page 9) Language The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Polish, Russian, T urkish, and Czechoslovakian. The factory default language is English. To change the display language: 1. Use the joystick to positi ...

  • Pelco IPSXM30CBW23-7X - page 12

    12 C1300M-B (6/05) Unit Inversion Unit inversion reconfigures the system so that it operates normally when it is installed in an inverted postion. The following are the available settings for unit inversion. Figure 1. Installation Methods To reconfigure the unit for inverted operation and control: 1. Use the joystick to position the cursor beside ...

  • Pelco IPSXM30CBW23-7X - page 13

    C1300M-B (6/05) 13 Quick Programming Guide (See Page 9) System Information The system Information screen displays ExSite model, software version, available memory , and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only . Use the following steps to display the System Information scre ...

  • Pelco IPSXM30CBW23-7X - page 14

    14 C1300M-B (6/05) Display Setup Display setup allows you to program how labels are displayed on the monitor . The following labels are available: PRESET LABEL Identifies preset. ZONE LABEL Identifies zone. ZOOM Identifies the amount of magnification. AZIMUTH*/ Amount of pan from 0° and the amount of tilt from 0° horizontal. ELEV A TION** DIR ...

  • Pelco IPSXM30CBW23-7X - page 15

    C1300M-B (6/05) 15 Quick Programming Guide (See Page 9) LABEL POSITIONS Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: Preset Label Zone Label Alarm 1 Azimuth*/Elevation**: XXX°/-XX° Zoom Ratio: XXX.XX Direction: Compa ...

  • Pelco IPSXM30CBW23-7X - page 16

    16 C1300M-B (6/05) Unit Settings CAMERA T YPE OF LIGHTING Pelco has calibrated settings that optimize the white balance, and the picture, for indoor and outdoor lighting conditions. There are two settings: OUTDOOR (default) INDOOR AUTO FOCUS Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions. There are two ...

  • Pelco IPSXM30CBW23-7X - page 17

    C1300M-B (6/05) 17 Quick Programming Guide (See Page 9) IR CUT FILTER (23X DAY/NIGHT CAMERA) ExSite IPSXM has two modes of operation: color and black-white. Y ou can increase sensitivity in low light conditions by switching to black-white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions. The following are th ...

  • Pelco IPSXM30CBW23-7X - page 18

    18 C1300M-B (6/05) ADVANCED CAMERA SETTINGS SHUTTER SPEED Shutter speed is the duration of the electronic shutter . Program shutter speed to operate automatically (Auto) or manually (Numeric V alue). Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will eliminate any flicker that may occur in the picture. A ...

  • Pelco IPSXM30CBW23-7X - page 19

    C1300M-B (6/05) 19 Quick Programming Guide (See Page 9) AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user -defined level. If auto iris is in the auto mode, it will remain that way until the iris is manually open ...

  • Pelco IPSXM30CBW23-7X - page 20

    20 C1300M-B (6/05) BACKLIGHT COMPENSATION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The system uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out ...

  • Pelco IPSXM30CBW23-7X - page 21

    C1300M-B (6/05) 21 Quick Programming Guide (See Page 9) MOTION PROPORTIONAL PAN Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings. This keeps the imag ...

  • Pelco IPSXM30CBW23-7X - page 22

    22 C1300M-B (6/05) PARK T IME This feature allows the system to begin a specified operation (scan, preset, or pattern) after a programmed time of inactivity . Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero. Park Action This feature will define the activ ...

  • Pelco IPSXM30CBW23-7X - page 23

    C1300M-B (6/05) 23 Quick Programming Guide (See Page 9) SCAN SPEED Scan speed is the degrees per second that the system will pan when in scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. PRESET FREEZE FRAME This feature freezes the scene on the monitor whe ...

  • Pelco IPSXM30CBW23-7X - page 24

    24 C1300M-B (6/05) LIMIT STOPS Limit stops are programmable stops that limit the pan range of the unit. There must be two limits, a left and a right, to define an area. There are two types of limit stops: To set manual or scan stops: 1. Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS. 2. Press Iris Open. 3. Follow ...

  • Pelco IPSXM30CBW23-7X - page 25

    C1300M-B (6/05) 25 Quick Programming Guide (See Page 9) AZIMUTH ZERO Azimuth is the pan angle from 0 to 359 degrees. Azimuth zero is the pan position you specify to be the 0-degree point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. To program azimuth zero: 1. Use th ...

  • Pelco IPSXM30CBW23-7X - page 26

    26 C1300M-B (6/05) POWER UP POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the system is cycled. The following settings are available: EXIT LANGUAGE ENGLISH UNIT INVERSION OFF <SYSTEM INFORMA TION> <DISPLA Y SETUP> <UNIT SETTINGS> <POSITION CALIBRA TI ...

  • Pelco IPSXM30CBW23-7X - page 27

    C1300M-B (6/05) 27 Quick Programming Guide (See Page 9) LINE SYNC Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: ExSite IPSXM automatically senses V-Sync input. No line sync setup is required for Pelco control systems that provide a V-Sync signal. For matrix systems that do not o ...

  • Pelco IPSXM30CBW23-7X - page 28

    28 C1300M-B (6/05) PRESETS The ExSite IPSXM system has 80 programmable preset positions. Each preset can be programmed to use pan, tilt, all programmable camera settings, and motion detection. The presets are numbered 1-32 and 35-82. Presets 33 and 34 are fixed commands that cannot be programmed. Preset 33 is disabled in the ExSite IPSXM. Preset 3 ...

  • Pelco IPSXM30CBW23-7X - page 29

    C1300M-B (6/05) 29 Quick Programming Guide (See Page 9) ENABLE MOTION DETECTION (23X DAY/NIGHT CAMERA) The following are the settings for MOTION DETECTION ENABLED: NOTE: Motion detection does not work if the shutter speed is set at less than 1/60 of a second. EDIT DETECTION AREAS (23X DAY/NIGHT CAMERA) Four motion detection areas can be defined fo ...

  • Pelco IPSXM30CBW23-7X - page 30

    30 C1300M-B (6/05) ACTIVATE AUX COMMAND (23X DAY/NIGHT CAMERA) Motion detection can be programmed to trigger an auxiliary command when motion is detected. The following are the settings for ACTIV A TE AUX: AUX T IME (23X DAY/NIGHT CAMERA) Aux time is the length of time the auxiliary will remain on after motion is detected. Available settings for AU ...

  • Pelco IPSXM30CBW23-7X - page 31

    C1300M-B (6/05) 31 Quick Programming Guide (See Page 9) PATTERNS A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power -up). The ExSite IPSXM can handle up to four user -defined patterns. Pattern lengt ...

  • Pelco IPSXM30CBW23-7X - page 32

    32 C1300M-B (6/05) ZONES A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The IPSXM positioning system is capable of eight zones, each with a 20-character label. To program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves to the right. 2. Move the joystick ...

  • Pelco IPSXM30CBW23-7X - page 33

    C1300M-B (6/05) 33 Quick Programming Guide (See Page 9) WINDOW BLANKING Window blanking allows a user to program up to eight, four -sided, user-defined areas that cannot be viewed by the operator of the system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide. ExSite IPSXM h ...

  • Pelco IPSXM30CBW23-7X - page 34

    34 C1300M-B (6/05) REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the blanking area remain visible. Reversing the window a second time will return it to its original condition. CLEAR WINDOW All areas that have been set for window blanking are cleared. BLANK ALL ...

  • Pelco IPSXM30CBW23-7X - page 35

    C1300M-B (6/05) 35 Quick Programming Guide (See Page 9) ALARMS The ExSite IPSXM system has seven alarm inputs, which can be programmed as high, medium or low priority . When an alarm is received, an input signal to the unit triggers the user -defined action (go to preset, run pattern, etc.) programmed for the alarm. There are three global alarm se ...

  • Pelco IPSXM30CBW23-7X - page 36

    36 C1300M-B (6/05) 3. Select the alarm priority: a. Use the joystick to position the cursor beside ALARM PRIORITY . b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active a ...

  • Pelco IPSXM30CBW23-7X - page 37

    C1300M-B (6/05) 37 Quick Programming Guide (See Page 9) 5. Set the auxiliary to activate: a. Use the joystick to position the cursor beside ACTIV A TE AUX. b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the following available selections. d. Press Iris Open to enter selection. NOTE: The AUX 1/AUX2 will st ...

  • Pelco IPSXM30CBW23-7X - page 38

    38 C1300M-B (6/05) WIPER The following IPSXM unit models feature a window wiper to clear moisture from the window of the enclosure: IPSXM31C22-2 IPSXM31C22-7 IPSXM31C22-2X IPSXM31C22-7X IPSXM31CBW23-2 IPSXM31CBW23-2X IPSXM31CBW23-7 IPSXM31CBW23-7X NOTE: The Wiper menu is available only on the above models. T o check the unit model, refer to the Sys ...

  • Pelco IPSXM30CBW23-7X - page 39

    C1300M-B (6/05) 39 Quick Programming Guide (See Page 9) SET W ASHER SEQUENCE An external washer (not supplied by Pelco) can be used to wash the window of the enclosure. Accessing AUX 3 or selecting Preset 87 will start the washer sequence. Use the following steps to program the washer sequence. 1. Use the joystick to position the cursor beside WIPE ...

  • Pelco IPSXM30CBW23-7X - page 40

    40 C1300M-B (6/05) AUX An auxiliary output is a programmable signal from the system that can trigger another device to operate. An auxiliary output is programmable to trigger from an alarm or from a controller . An AUX 1 command from the controller will activate the relay in the system and operate the device that is connected to the relay . The out ...

  • Pelco IPSXM30CBW23-7X - page 41

    C1300M-B (6/05) 41 Quick Programming Guide (See Page 9) CLEAR Use this setting to clear user -defined settings or return the system to factory default settings. The following are the available CLEAR settings: EXIT LANGUAGE ENGLISH UNIT INVERSION OFF <SYSTEM INFORMA TION> <DISPLA Y SETUP> <UNIT SETTINGS> <POSITION CALIBRA TION& ...

  • Pelco IPSXM30CBW23-7X - page 42

    42 C1300M-B (6/05) PASSWORD ExSite IPSXM features password protection to prevent unauthorized changes to the system settings. An operator can open the System Information and Display Setup Screens, but cannot access any of the Unit Settings menus. Controller/keyboard commands cannot override password-protected settings. If a keyboard is used to set ...

  • Pelco IPSXM30CBW23-7X - page 43

    C1300M-B (6/05) 43 Position Calibration Position calibration sets the preset reference point for all automatic positioning system movements. Before programming presets, patterns, zones, labels, and window blanking, program and document the position calibration point. The purpose of the calibration point is to restore all programmed settings quickly ...

  • Pelco IPSXM30CBW23-7X - page 44

    44 C1300M-B (6/05) Reset, Cycle Power , Reboot RESET CAMERA Use this function to reset all camera settings to factory default parameters. NOTE: Reset camera restores all camera settings, except those associated with presets. CYCLE CAMERA POWER If the camera is not operating or if you lose camera control, cycle camera power . Cycling camera power re ...

  • Pelco IPSXM30CBW23-7X - page 45

    C1300M-B (6/05) 45 Software/Language File Upload The ExSite IPSXM system allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’ s remote monitor kit (IPS-RMK), remote data port box (IPS-RDPE-2 ...

  • Pelco IPSXM30CBW23-7X - page 46

    46 C1300M-B (6/05) Specifications *Manual control of camera setup functions can be done with CM6700, CM6800, CM8500, CM9500, CM9740, CM9760, CM9770, CM9780, KBD200A, KBD300A, and MPT9500 controllers, but not with CM7500, MPT9000 or KBD9000 controllers. Camera Day/Night (23X) Color LowLight ™ (22X) Color Signal Format NTSC, P AL NTSC, P AL Scanni ...

  • Pelco IPSXM30CBW23-7X - page 47

    PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series ...

  • Pelco IPSXM30CBW23-7X - page 48

    W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Security Camera

Documents that we receive from a manufacturer of a Pelco IPSXM30CBW23-7X can be divided into several groups. They are, among others:
- Pelco technical drawings
- IPSXM30CBW23-7X manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco IPSXM30CBW23-7X
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco IPSXM30CBW23-7X.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco IPSXM30CBW23-7X, service manual, brief instructions and user manuals Pelco IPSXM30CBW23-7X. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco IPSXM30CBW23-7X.

Similar manuals

A complete manual for the device Pelco IPSXM30CBW23-7X, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco IPSXM30CBW23-7X by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco IPSXM30CBW23-7X.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco IPSXM30CBW23-7X - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco IPSXM30CBW23-7X, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco IPSXM30CBW23-7X, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco IPSXM30CBW23-7X - which should help us in our first steps of using Pelco IPSXM30CBW23-7X
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco IPSXM30CBW23-7X
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco IPSXM30CBW23-7X in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco IPSXM30CBW23-7X?

Use the form below

If you did not solve your problem by using a manual Pelco IPSXM30CBW23-7X, ask a question using the form below. If a user had a similar problem with Pelco IPSXM30CBW23-7X it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)