English dropdown-ico

Manual AirLive WHA-5500CPE-NT

72 pages Not applicable
Download

Go to site of 72

Summary
  • AirLive WHA-5500CPE-NT - page 1

    W H A -5500CPE 802.11a Multi-Function Outdoor CPE Use r ’ s Manual ...

  • AirLive WHA-5500CPE-NT - page 2

    Declaration of Conformity We, Manufacturer/Importer Declare that the product 802.11a Multi-function Outdoor AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description Broadband Radio Access Network(BRAN); 5GHz high (2005-03) performance RLAN; Harmonized EN Covering essential requireme ...

  • AirLive WHA-5500CPE-NT - page 3

    AirLive WHA-5500CPE CE Declaration Statement Country Declaration Country Declaration cs Česky [Czech] OvisLink Corp. tímto prohlašuje, že tento Air Live WHA-5500CPE je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. lt Lietuvių [Lithuanian] Šiuo OvisLink Corp. deklaruoja, kad šis AirLive WH ...

  • AirLive WHA-5500CPE-NT - page 4

    Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interfer ence in a residential installation. This equipment ...

  • AirLive WHA-5500CPE-NT - page 5

    T able of Contents Table of Contents 1. Introduction ................................................................................................1 1.1 Over view ................................................................................................................. 1 1.2 Feat ures ....................................................... ...

  • AirLive WHA-5500CPE-NT - page 6

    T able of Contents 3.4.1 AP Node Settings....................................................................................... 35 3.4.2 Repeater N ode Settings ............................................................................ 37 3.4.3 Repeater Node Local service Se ttings....................................................... 38 3.4.4 ...

  • AirLive WHA-5500CPE-NT - page 7

    1. Introduction 1 1. Introduction 1.1 Overview The WHA-5500CPE is a wireless access-poi nt based on IEEE 802.11a 5-GHz radio technologies. It contains an 802.11a wireless interface and one half/full-duplex 10/100 LAN interface. Moreover, WHA-5500C PE features a total of 6 wir eless modes: Access Point, Repeater, WDS Bridge, Client Infrastruc ture, ...

  • AirLive WHA-5500CPE-NT - page 8

    1. Introduction  Firmware upgradeable. 1.3 Wireless Operation Modes A group of wireless stations co mmunicating with each other is called a Basic Service Set (BSS) and is identified by a unique SSID. When a WHA-5500CPE is used, it can be configured to operat e in the following network configurations. 1.3.1 Access Point Mode When configured in th ...

  • AirLive WHA-5500CPE-NT - page 9

    1. Introduction 1.3.2 Repeater Mode In Repeater mode, the WHA-5500CPE set as a repeater extends the range of wireless LAN. 1.3.3 WDS Bridge Mode When configured to operate in the Wirele ss Distribution System (WDS) Mode, the WHA-5500CPE provides bridgi ng functions between the LAN behind it and separ ates LANs behind other APs’ operat ing in the ...

  • AirLive WHA-5500CPE-NT - page 10

    1. Introduction 1.3.4 Client Infrastructure Mode In Client Infrastructure mode, the WHA-5500CPE is connected to a computer and acts like a wireless station, so that th e computer can wirelessly access the other network’s services, such as Internet. 1.3.5 Client Ad Hoc Mode In Client Ad Hoc mode, WHA-5500CPE is connect ed to a computer and acts li ...

  • AirLive WHA-5500CPE-NT - page 11

    1. Introduction 1.3.6 WISP Router Mode In WISP Router Mode, WHA-5500CPE is connect ed to several computers and acts like a Client mode AP. With IP sharing function, the computers can share the WISP connection via WHA-5500CPE. 1.4 Set up the device The WHA-5500CPE can be managed remotely by a PC through either the wired or wireless network. To do th ...

  • AirLive WHA-5500CPE-NT - page 12

    1. Introduction address in a different subnet, dependi ng on the existing network settings (if there is any) or user’s preferences. 1.4.2 AUTOMATIC IP The WHA-5500CPE can also be configured to “ obtain” an IP address automatically from a DHCP server on the network. This address is called “dynamic” because it is only dynamically assigned t ...

  • AirLive WHA-5500CPE-NT - page 13

    2. Install the WHA-5500CPE 2 2. Inst all the 802.1 1 A Access Point This section describes the in stallation procedure for the WHA-5500CPE. It starts with a summary of the content of the package you hav e purchased, followed by steps of how to power up and connect the WHA-5500CPE. Finally, th is section explains how to configure a Windows PC to com ...

  • AirLive WHA-5500CPE-NT - page 14

    2. Install the WHA-5500CPE 2.2 Hardware Installation Please take the device unit from the color box, a scroll driver, an Ethernet cable with adequate length according to your application. Ste p 1 : A scroll driver and Ethernet Cable, four screws and WHA-5500CPE main unit Ste p 2 : Open the housing of WHA-5500CPE Ste p 3 : T urn the WHA-5500CPE to a ...

  • AirLive WHA-5500CPE-NT - page 15

    2. Install the WHA-5500CPE Ste p 6 : Make sure that the other side of Ethernet cable is out of housing. Close the housing. Ste p 5 : Put the Ethernet cable along the module, till the exit (at the bottom of Housing). Ste p 8 : Plug the Ethernet to the PoE “P + DA T A OUT” jack of injector . Ste p 7 : Scroll up 4 screws well. Be careful, this is ...

  • AirLive WHA-5500CPE-NT - page 16

    2. Install the WHA-5500CPE Step 10 : Plug the Data Ethernet cable to the port “DA T A IN” of injector . Ste p 9 : Plug the power cord of adaptor ER IN” port. into the injector “POW 2.2.1 Mounting Configuration M-Sha ped moun ting - 1 p c Lock frame - 1 pc M6-60 scr ew - 2 pcs 9 10 8 7 2 4 6 5 3 1 M6 S/W - 6 pcs M6-16 s crew - 4 pcs M6 was h ...

  • AirLive WHA-5500CPE-NT - page 17

    2. Install the WHA-5500CPE 9 10 1 2 3 4 5 Wall mount M- Shaped mounting - 1 pc Lock frame - 1 pc M6-60 scr ew - 2 pcs 9 10 8 7 2 4 6 5 3 1 M6 S/W - 6 pc s M6-16 scr ew - 4 pcs M6 w asher( φ 16mm ) - 4 p cs Antenna body - 1pc M6 washer ( φ 12mm ) - 2 p cs 5"/ 32-16 screw - 4 pcs Plasti c anchor - 4 pcs 2.2.2 Antenna polarization  Pease ins ...

  • AirLive WHA-5500CPE-NT - page 18

    2. Install the WHA-5500CPE  Pease do not tilt the CPE more than 15 degree angle from vertical. 2.3 Configuration steps This section describes conf iguration required for the WH A-5500CPE before it can work properly in your network. First, it is assumed that in your LAN envir onment, a separate DHCP server will be available for assigning dynamic ...

  • AirLive WHA-5500CPE-NT - page 19

    2. Install the WHA-5500CPE addresses dynamically” will work with the AP , with each other, and with devices on the wired LAN network. 2.4 Set up a wireless client as a DHCP client The following will give detailed steps of how to configure a PC or a wireless client to “obtain IP addresses automatically”. In the case of using a LAN attached PC, ...

  • AirLive WHA-5500CPE-NT - page 20

    3. Basic Confi guration This section describes the basic confi guration procedure for the WHA-5500CPE. It describes how to set up the WHA-5500CPE for wireless connections, and the configuration of the local LAN environment. All basic conf igurations may be effected through a standard Web browser such as Microso ft Internet Explorer. From a PC that ...

  • AirLive WHA-5500CPE-NT - page 21

    3. Basic Confi guration If you are logging on for the first time, you should use the factory default setting “ airlive ”. The password is always displayed as a string of wildcards or dots. Click the LOG ON button to start the configuration session. 3.1 Setup wizard The Setup Wizard will guide you through a seri es of configuration screens to se ...

  • AirLive WHA-5500CPE-NT - page 22

    3. Basic Confi guration 3.1.2 DEVICE IP SETTINGS Setup Wizard>> Device IP Settings The Device IP Settings screen allows you to configure t he IP address and subnet of the device. Although you can rely on a DHCP server to assign an IP address to the WHA-5500CPE automatically, it is recommended that you configure a static IP address manually in ...

  • AirLive WHA-5500CPE-NT - page 23

    3. Basic Confi guration 3.1.3 WIRELESS SETTINGS Setup Wizard>>Wireless Settings Network ID (SSID): The SSID is the network name used to identify a wireless network. The SSID must be the same for all devices in t he wireless network (i.e. in the same BSS). Several access points on a network can have the same SSID. The SSID length is up to 32 c ...

  • AirLive WHA-5500CPE-NT - page 24

    3. Basic Confi guration Security Policy: You can select different security policy to provide association authentication and/or data encryption. WEP Setup Wizard>>Wireless Settings >>Select Security Policy>>WEP WEP allows you to use data encryption to se cure your data from being eavesdropped by malicious people. It allows 3 types ...

  • AirLive WHA-5500CPE-NT - page 25

    3. Basic Confi guration 802.1x allows users to leverage a RADIUS se rver to do association authentications. You can also enable dynamic WEP key (128 bit) to have data encryption. Here you do not have to enter the WEP key manually because it will be gener ated automatically and dynamically. Rekey interval is time period that the system will change t ...

  • AirLive WHA-5500CPE-NT - page 26

    3. Basic Confi guration WPA-PSK Setup Wizard>>Wireless Settings >>Select Security Policy>>WPA-PSK Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) provides better security than WEP keys. It does not require a RADIUS se rver in order to provide association authentication, but you do have to enter a shared key for the authenti ...

  • AirLive WHA-5500CPE-NT - page 27

    3. Basic Confi guration WPA2 Setup Wizard>>Wireless Settings >>Select Security Policy>>WPA2 WPA2 stands for Wi-Fi Protected Access 2. It provides stronger data protection and network access control then WPA. Only authorized users can access the wireless networks. Encryption Ty pe : There are two encryption types TKIP and CCMP (AES ...

  • AirLive WHA-5500CPE-NT - page 28

    3. Basic Confi guration Encryption Ty pe : There are two encryption types TKIP and CCMP (AES) . While CCMP provides better security than TKIP, some wirel ess client stations may not be equipped with the hardware to support it. You can select Both to allow TKIP clients and CCMP clients to connect to the Access Poin t at the same time. Group Rekey In ...

  • AirLive WHA-5500CPE-NT - page 29

    3. Basic Confi guration WPA-PSK-AUTO tries to authenticate wirele ss clients using WPA-PSK or WPA2-PSK. Pre-shared Key : This is an ASCII string with 8 to 63 characters. Please make sure that both the WHA-5500CPE and the wireless cli ent stations use the same key. Encryption Ty pe : There are two encryption types TKIP and CCMP (AES) . While CCMP pr ...

  • AirLive WHA-5500CPE-NT - page 30

    3. Basic Confi guration 3.2 Advanced settings The advanced settings tab on the top row of the window allows you to perform modifications that normally you may not need to do for general operations except changing your password from the default factory setting (this is highly recommended for security purposes). 3.2.1 PASSWORD SETTINGS Advanced Setti ...

  • AirLive WHA-5500CPE-NT - page 31

    3. Basic Confi guration 3.2.2 SYSTEM MANAGEMENT Advanced Settings>> System Management Clicking the System Management button to configure system re lated parameters to for the WHA-5500CPE. HTTP Port No.: HTTP stands for Hyper Text Transfer Protocol. The default port for the HTTP Web server is 80. Time-out: This setting specifies the duration o ...

  • AirLive WHA-5500CPE-NT - page 32

    3. Basic Confi guration 3.2.3 SNMP Settings Advanced Settings>>SNMP Settings This screen allows you to configure SNMP p arameters including the system name, the location and contact information. System Name: A name that you assign to your 802.1 1a+g Router . It is an alphanumeric string of up to 30 characters. System Location: Enter a system ...

  • AirLive WHA-5500CPE-NT - page 33

    3. Basic Confi guration Assign a specific name and IP address for your SNMP trap manager: A trap manager is a remote SNMP management station where special SNMP trap messages are generated (by the router) and sent to in the network. You can define trap m anagers in the system. You can add a trap m anager by entering a name , an IP address , followed ...

  • AirLive WHA-5500CPE-NT - page 34

    3. Basic Confi guration 3.2.4 MAC FILTERING SETTINGS Advanced Settings>>Mac Filtering Settings The WHA-5500CPE allows you to define a list of MAC addre sses that are allowed or denied to access the wireless network. Disable MAC address control list: When selected, no MAC address filtering will be performed. Enable GRANT address control list: ...

  • AirLive WHA-5500CPE-NT - page 35

    3. Basic Confi guration (1) Access Point (2) Repeater (3) WDS Bridge (4) Client Infrastructure (5) Client Adhoc (6) WISP Router 29 AirLive WHA-5500CPE User ’ s Manual ...

  • AirLive WHA-5500CPE-NT - page 36

    3. Basic Confi guration 3.3 Access Point Mode Settings Advanced Settings>> Operation Mode>> Access Point Select “Access Point” mode and then press APPL Y button. AirLive WHA-5500CPE User ’ s Manual 30 ...

  • AirLive WHA-5500CPE-NT - page 37

    3. Basic Confi guration 3.3.1 Wireless Settings Advanced Setting>> Wireless Settings Beacon Interval: The WHA-5500CPE broadcasts beacon fr ames regularly to announce its existence. The beacon Interval specifies how often beacon frames are transmitted in time unit of milliseconds. The default value is 100 , and a valid value should be between ...

  • AirLive WHA-5500CPE-NT - page 38

    3. Basic Confi guration Age Out T imer: Set the age out time. The default is 300 sec. Transmit Power: Transmit power output depends upon the size and RF characteristics because that will determine the number of APs, channels, and need for antennas. Ack T imeOut (1 1a): The "ACK t ime-out" determines how long the program waits af ter recei ...

  • AirLive WHA-5500CPE-NT - page 39

    3. Basic Confi guration VLAN: VLAN stands for V irtual Local Area Network. It is a technique allows one or more physical LAN routers or APs to deliver packets as if they were a sing le physical router or AP . DiffServ Marking: Enable DiffServ Marking to have better traf fic prioritization and bandwidth management. Disable SSID Broadcasting: Select ...

  • AirLive WHA-5500CPE-NT - page 40

    3. Basic Confi guration and Ack-policy . 3.3.4 RADIUS Settings Advanced Settings >> RADIUS Setting RADIUS servers provide centralized authentic ation services to wireless clients. Two RADIUS servers can be defined: one acts as a primary, and the other acts as a backup. MAC address filtering based authent ication requires a MAC addr ess filter ...

  • AirLive WHA-5500CPE-NT - page 41

    3. Basic Confi guration alphanumeric characters. RADIUS Server Reattempt Period: The number of times the WHA-5500CPE should attempt to contact the prim ary server before giving up Enter the information for a second RADIUS server in case that there are 2 on your network which you are using authent icate wireless clients. 3.4 Repeater Mode Settings F ...

  • AirLive WHA-5500CPE-NT - page 42

    3. Basic Confi guration Setup Wizard>>Wireless settings Select the WLAN mode and c hannel of your choice Click on “APPLY” to finish setup. AirLive WHA-5500CPE User ’ s Manual 36 ...

  • AirLive WHA-5500CPE-NT - page 43

    3. Basic Confi guration 3.4.2 Repeater Node Settings Advanced Settings>>Operation Mode To set a device as Repeater, the device has to be first defined as repeater operation mode. Select “Repeater” mode and then enter the “Remote SSID”, this is the SSID of AP node’s SSID. Click on the “Repeater” radio button Key-in the SSID of up ...

  • AirLive WHA-5500CPE-NT - page 44

    3. Basic Confi guration 3.4.3 Repeater Node Local service Settings Setup Wizard>>Wireless Settings In the Setup Wizard, select the WLAN mode, in this case, only the WLAN mode and SSID can be modified, the channe l will automatically readj usted as the upper node. Set the SSID for the Hotspot service. This SS ID can be different from upper nod ...

  • AirLive WHA-5500CPE-NT - page 45

    3. Basic Confi guration will be fragmented before the tran smission. It should have a va lue of 256-2346 bytes, with a default of 2346 . If you experience a high packet error rate, you should slightly decrease the Fragmentation Threshold. DTIM Interval: The WHA-5500CPE buffers packets for stations that operate in the power-saving mode. The Delivery ...

  • AirLive WHA-5500CPE-NT - page 46

    3. Basic Confi guration 3.4.5 QoS Settings Advanced Setting >> QoS Settings QoS stands for Quality of Service which attempt s to provide dif ferent levels of quality to different types of network traf fic. QoS stands for Quality of Service which attempt s to provide dif ferent levels of quality to different types of network traf fic. WMM stan ...

  • AirLive WHA-5500CPE-NT - page 47

    3. Basic Confi guration 3.4.6 RADIUS Settings Advanced Setting >> RADIUS Settings RADIUS servers provide centralized authentic ation services to wireless clients. Two RADIUS servers can be defined: one acts as a primary, and the other acts as a backup. MAC address filtering based aut hentication requires a MAC a ddress filter table to be crea ...

  • AirLive WHA-5500CPE-NT - page 48

    3. Basic Confi guration alphanumeric characters. RADIUS Server Reattempt Period: The number of times t he WHA-5500CPE should attempt to contact the prim ary server before giving up Enter the information for a second RADIUS server in case that there are 2 on your network which you are using authentica te wireless clients. 3.5 WDS Bridge Mode Setting ...

  • AirLive WHA-5500CPE-NT - page 49

    3. Basic Confi guration 3.5.1 Wireless Settings Advanced Setting >> Wireless Setting RTS Threshold: RTS/CTS frames are used to gain cont rol of the medium for transmission. Any unicast (data or control) frames la rger than specified RTS threshold must be transmitted following the RTS/CTS handshake exchange mechanis m. The RTS threshold should ...

  • AirLive WHA-5500CPE-NT - page 50

    3. Basic Confi guration 3.6 Client Infrastructure Mode Settings Advanced Setting>>Operation Mode>> Client Infrastructure Select “Client Infrastructure” mode and then click APPLY button. The client can search for the SSIDs of APs in the environment, in order to select the AP that he wants to make connection with. For details, pleas e ...

  • AirLive WHA-5500CPE-NT - page 51

    3. Basic Confi guration 3.6.1 Wireless Settings Advanced Setting >> Wireless Setting RTS Threshold: RTS/CTS frames are used to gain cont rol of the medium for transmission. Any unicast (data or control) frames la rger than specified RTS threshold must be transmitted following the RTS/CTS handshake exchange mechanism . The RTS threshold should ...

  • AirLive WHA-5500CPE-NT - page 52

    3. Basic Confi guration 3.7 Client Adhoc Mode Settings Advanced Setting >> Operation Mode >> Client Adhoc Select “Client Adhoc” mode and then click APPLY button. 3.7.1 Wireless Settings Advanced Setting >> Wireless Settings RTS Threshold: RTS/CTS frames are used to gain cont rol of the medium for transmission. Any unicast (dat ...

  • AirLive WHA-5500CPE-NT - page 53

    3. Basic Confi guration Transmit Power: Transmit power output depends upon the size and RF characteristics because that will determine the number of APs, channels, and need for antennas. Ack TimeOut (11a): The "ACK time-out" determines how long the program waits after receiving a packet from a file stream to dete rmine that stream to be a ...

  • AirLive WHA-5500CPE-NT - page 54

    3. Basic Confi guration should have a value between 256- 2347 bytes, with a default of 2347 . It is recommended that this value does not deviate from the default too much. Fragmentation: When the size of a unicast frame exce eds the fragmentation threshold, it will be fragmented before the tran smission. It should have a va lue of 256-2346 bytes, w ...

  • AirLive WHA-5500CPE-NT - page 55

    3. Basic Confi guration 3.8.2 WISP Router DHCP Server Settings Advanced Setting >> DHCP server Setting DHCP stands for Dynamic Host Configuratio n Protocol. The DHCP server dynamically assigns IP addresses (from a pre-defined list) to clients when they l og on. The client will request a new IP when the specific period of time is about to run ...

  • AirLive WHA-5500CPE-NT - page 56

    3. Basic Confi guration 3.8.3 Multiple DMZ Advanced Settings >> Multiple DMZ Select a DMZ type and then enter the local DMZ IP address. Note: A DMZ server is a common term used to describe the default virtual server. If the DMZ server is selected, Internet traffic not dest ined for a valid virtual server is redirected to this privately addres ...

  • AirLive WHA-5500CPE-NT - page 57

    3. Basic Confi guration 3.8.4 Virtual Server Settings Advanced Settings >> Virtual Setting This allows you to specify one or more appl ications running on server computers on the LAN that may be accessed by any Internet us er. Internet data destined for the specified public port will be direct ed to the specified private port nu mber on the L ...

  • AirLive WHA-5500CPE-NT - page 58

    3. Basic Confi guration 3.8.5 Special Applications Advanced Setting >> Special Applications Some Internet application such as Instant Me ssaging or Games in particular use groups of ports, and are not easy to work behind a fi rewall. To work well with these special applications we will open ports to let traffic pass through. Note: You can use ...

  • AirLive WHA-5500CPE-NT - page 59

    3. Basic Confi guration 3.8.6 IP Filtering Settings Advanced Setting>>IP Filtering Settings IP filtering is simply a mechanism that decides which types of IP datagrams will be processed normally and which will be discarded. This allows you to define rules for allowi ng / denying access from / to the Internet. Please do set both inbound/outbou ...

  • AirLive WHA-5500CPE-NT - page 60

    3. Basic Confi guration Disable IP filtering: No IP filtering is performed. Grant IP access: Data traffic satisfying rules below are allowed/forwarded. Deny IP access: Data traffic satisfying ru les below are denied/filtered. You can also define IP filtering rule, such as: Name; IP Protocol; Apply to either Outbound to the Internet or Inbo und from ...

  • AirLive WHA-5500CPE-NT - page 61

    3. Basic Confi guration Static Routing: This allows you to manually configure static network routes. Stat ic routes will override routes learned by standard routi ng protocol discover methods. IP Routing Table: To delete a static route from the table, select the rout e and click DELETE SELECTED. Note: Changes to the routing tabl e will take effect ...

  • AirLive WHA-5500CPE-NT - page 62

    3. Basic Confi guration Enter the calculated value of “AckT imeOut” into the appropriate “Ack T i meOut” field (1 1a) in the “Wireless Settings” window . AirLive WHA-5500CPE User ’ s Manual 56 ...

  • AirLive WHA-5500CPE-NT - page 63

    4. Manage t he WHA-5500C PE 4 4. Manage the WHA-5500CPE This Chapter covers other managem ent aspects of your WHA-5500CPE:  Check Device Information  View System Log  Wireless Client Table  Radio Table  Site Survey  Upgrade Firmware  Save or Restore Configuration Changes  Reset to Factory Default  Reboot AP  What if yo ...

  • AirLive WHA-5500CPE-NT - page 64

    4. Manage t he WHA-5500C PE 4.2 System Log Device Status >> System Log The WHA-5500CPE maintains a system log that you can use to track events that have occurred in the system. Such event messages can sometimes be helpful in determining the cause of a problem that you may have encountered. You can select System Log on the left side of the Dev ...

  • AirLive WHA-5500CPE-NT - page 65

    4. Manage t he WHA-5500C PE 4.4 Radio Table Device Status >> Radio Table The Radio Table indicates wireless radio c ounters’ data under one of the six operational modes: Access Point; Repeater; WDS Bridge; Cli ent Infrastructure, Client Adhoc and WISP Router. Radio Table will indicate the following informa tion: Radio Name, Mode, Op Channel ...

  • AirLive WHA-5500CPE-NT - page 66

    4. Manage t he WHA-5500C PE 4.5.1 Signal survey Device Status >> Site Survey >> Signal Survey This is a unique feature from AirLive. It provides real-time signal strength between two nodes. Better signal strength means better alignm ent results, which aims to improve link quality. Click the “SIGNAL SURVEY” button. A pop-up window wi ...

  • AirLive WHA-5500CPE-NT - page 67

    4. Manage t he WHA-5500C PE 4.6 Firmware Upgrade System tools >> Firmware Upgrade You can upgrade the firmware of your WHA- 5500CPE (the software th at controls your WHA-5500CPE’s operation). Normally, this is done when a new version of firmware offers new features that you want, or solves probl ems that you have encountered with the curren ...

  • AirLive WHA-5500CPE-NT - page 68

    4. Manage t he WHA-5500C PE 4.7 Configuration Save and Restore System Tools >> Configur ation Save and Restore You can save system configurat ion settings to a file, and later download it back to the WHA-5500CPE by following the steps. Step 1 Select Configuration Save and Restore from the System Tools menu. Step 2 Enter the path of the confi ...

  • AirLive WHA-5500CPE-NT - page 69

    4. Manage t he WHA-5500C PE 4.8 Factory Default System Tools >> Factory Default You can reset the configuration of your WH A-5500CPE to the factory default settings. To do it: Step 1 Select Factory Default from the Sy stem Tools menu. Step 2 Click YES to go ahead and restore the configur ation to the factory default. 4.9 Reboot System System ...

  • AirLive WHA-5500CPE-NT - page 70

    4. Manage t he WHA-5500C PE Rebooting the WHA-5500CPE would disconnect any active clients and therefore will disrupt any current data traf fic. 4.10 What if you forgot the password? Hardware Reset To Factory Defaults If you forgot the password, the only way to reco ver is to clear the dev ice configuration and return the unit to its original st ate ...

  • AirLive WHA-5500CPE-NT - page 71

    Specifications 5. Specification s AP Specification Product Name • IEEE WHA-5500CPE OS • Linux® 2.4.18 St andard • IEEE 802.1 1a • IEEE 802.1d S panning T ree • IEEE 802.1x • IEEE 802.3u Ethernet protocol WLAN Network Architecture T ype • Infrastructure • 54 Mbps @ 17 dBm • 48 Mbps @ 18 dBm • 36 Mbps @ 19 dBm TX-Power ( 5470-572 ...

  • AirLive WHA-5500CPE-NT - page 72

    Specifications Antenna Specification Frequency range • 5150 MHz - 5875 MHz Gain • 18 dBi VSWR • 2.0 : 1 Max Polarization* • Linear , vertical HPBW/Horizont al • 13.5 ° - 15.5 ° HPBW/vertical • 13 ° - 16 ° Front-to-back ratio • 25 dB Power handling • 6 W (cw) Impedance • 50 Ohms Connector • MMCX Cable • RG 316, 15cm • ETS ...

Manufacturer AirLive Category Access Point

Documents that we receive from a manufacturer of a AirLive WHA-5500CPE-NT can be divided into several groups. They are, among others:
- AirLive technical drawings
- WHA-5500CPE-NT manuals
- AirLive product data sheets
- information booklets
- or energy labels AirLive WHA-5500CPE-NT
All of them are important, but the most important information from the point of view of use of the device are in the user manual AirLive WHA-5500CPE-NT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AirLive WHA-5500CPE-NT, service manual, brief instructions and user manuals AirLive WHA-5500CPE-NT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AirLive WHA-5500CPE-NT.

Similar manuals

A complete manual for the device AirLive WHA-5500CPE-NT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AirLive WHA-5500CPE-NT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AirLive WHA-5500CPE-NT.

A complete AirLive manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AirLive WHA-5500CPE-NT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AirLive WHA-5500CPE-NT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AirLive WHA-5500CPE-NT, that we can find in the current document
3. Tips how to use the basic functions of the device AirLive WHA-5500CPE-NT - which should help us in our first steps of using AirLive WHA-5500CPE-NT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AirLive WHA-5500CPE-NT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AirLive WHA-5500CPE-NT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AirLive WHA-5500CPE-NT?

Use the form below

If you did not solve your problem by using a manual AirLive WHA-5500CPE-NT, ask a question using the form below. If a user had a similar problem with AirLive WHA-5500CPE-NT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)