English dropdown-ico

Manual Bosch Appliances VEZ-400

68 pages 0.97 mb
Download

Go to site of 68

Summary
  • Bosch Appliances VEZ-400 - page 1

    VEZ-400 Mini PTZ Dome VEZ-400 Series en User Manual ...

  • Bosch Appliances VEZ-400 - page 2

    ...

  • Bosch Appliances VEZ-400 - page 3

    VEZ-400 Mini PTZ Dome Table of Cont ents | en 3 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 T able of Contents 1S a f e t y 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Important notices 7 1.4 FCC & ICES compliance 10 1.5 Bosch notices 13 2 Description 15 2.1 Features 15 3 Unpacking 16 3.1 Parts ...

  • Bosch Appliances VEZ-400 - page 4

    4 en | Table of Cont ents VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.3.2 Reboot 34 7.3.3 Initialize 34 7.3.4 Password 35 7.4 Display Setup 36 7.4.1 OSD Setup 36 7.4.2 Privacy Zone 37 7.4.3 Image Setup 39 7.4.4 Motion/Face Detection 39 7.4.5 Language 4 0 7.5 Camera Setup 41 7.5.1 Focus/Zoom 41 7 ...

  • Bosch Appliances VEZ-400 - page 5

    VEZ-400 Mini PTZ Dome Safety | en 5 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1S a f e t y Before installing and operating the camera, please read this manual carefully. 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the pro ...

  • Bosch Appliances VEZ-400 - page 6

    6 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1.2 Impor tant safety instr uctions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow these instructions. 5. Do not install near any heat sources such as radiators, heaters, stoves, or other equipment ...

  • Bosch Appliances VEZ-400 - page 7

    VEZ-400 Mini PTZ Dome Safety | en 7 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1.3 Impor tant notices All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at le ast 3 mm in each pole, into the electrical installation of the buildi ng. I f it is neede d to op en the housing for servi ...

  • Bosch Appliances VEZ-400 - page 8

    8 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60 ) . Coax grounding : – Ground the cable system if connecting an outside cable system to the un ...

  • Bosch Appliances VEZ-400 - page 9

    VEZ-400 Mini PTZ Dome Safety | en 9 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoi ...

  • Bosch Appliances VEZ-400 - page 10

    10 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. SELV - All the input/output ports ar e Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits. Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SE ...

  • Bosch Appliances VEZ-400 - page 11

    VEZ-400 Mini PTZ Dome Safety | en 11 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 interference when the eq uipment is operated in a commercial environment . This equipment generates, us es, and radiates radio freque ncy energy and, if not installed and used in accordance with the instructions, may cause harmful interferen ...

  • Bosch Appliances VEZ-400 - page 12

    12 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. – cet appareil ne pe ut pas provoquer d'interfé rence nuisible et – cet appareil doit pouvoir to lérer toutes les interférences auxquelles il est soumit, y co mpris les interférences qui pourraient in fluer sur son bon fonct ...

  • Bosch Appliances VEZ-400 - page 13

    VEZ-400 Mini PTZ Dome Safety | en 13 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Au besoin, l’utilisateur cons ultera son revendeur ou un technicien qualifié en radio /télévision, qui procédera à une opération corrective. La brochure suiv ante, publiée par la Commissi on fédérale de s communications (FCC), p e ...

  • Bosch Appliances VEZ-400 - page 14

    14 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Copyright This manual is the intellectual property of Bosch Security Systems and is protected by co pyright. All rights reserved. Trademarks All hardware and software p r oduct names used in this document are likely to be regi stered tra ...

  • Bosch Appliances VEZ-400 - page 15

    VEZ-400 Mini PTZ Dome Description | en 15 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 2 Description This manual is a reference for programming and operating the VEZ-400 Mini PTZ Dome camera. It contains information about features, commands, an d operation methods. The VEZ-400 Mini PTZ Dome is an autofocus, high-resolutio ...

  • Bosch Appliances VEZ-400 - page 16

    16 en | Unpackin g VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3 Unpacking This equipment should be unpack ed and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. The original packing carton is the safest contain er in which to transport the u ...

  • Bosch Appliances VEZ-400 - page 17

    VEZ-400 Mini PTZ Dome Unpacking | en 17 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3.2 Additional T ools Required – No. 2 Phillips screwdriver – Drill with approp riate bit for pre-drilling anchor holes – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) 3.3 Accessorie s The following ...

  • Bosch Appliances VEZ-400 - page 18

    18 en | Installation Overview VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 4 Installation Over view The VEZ-400 Mini PTZ Dome camera comes with the hardware and installation instructions ne cessary to mount the camera to a ceiling. This following mounting access ories are available (and are supplie ...

  • Bosch Appliances VEZ-400 - page 19

    VEZ-400 Mini PTZ Dome Installing a Sur face Mount | en 19 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 5 Installing a Sur face Mount Use the following illustration as a guide for installing the camera directly onto the ceiling (surface mount): Figu re 5.1 Mounting diagram Number Description 1 Drilling template 2 6 x 30 mm ...

  • Bosch Appliances VEZ-400 - page 20

    20 en | Installing a Surface Mount VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Determine a secure location that can support the weight of the dome. 2. Use the template (refer to Figu re 6.1 , item 1) to mark the locations of the four screw holes and the cable conduit. 3. Pre-drill the four scre ...

  • Bosch Appliances VEZ-400 - page 21

    VEZ-400 Mini PTZ Dome Installing a Sur face Mount | en 21 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 screws enough to ensure that the camera base is se cured to the ceiling. 11. Make the necessary Dip Switch settings (described in chapter 4.3). Note : This step can also be done later, but then the dome cover must be re- ...

  • Bosch Appliances VEZ-400 - page 22

    22 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 6 Connection After the camera is mounted, connect the video, control, and power cables. CAUTION! Do not connect power to the camera until all other connections are made. CAUTION! Installation should only be perfor med by qualified serv ...

  • Bosch Appliances VEZ-400 - page 23

    VEZ-400 Mini PTZ Dome Connection | en 23 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Use the following illustration as a guide for preparing and connecting the wiring: Figu re 6.1 T y pical wiring configuratio n Note: The box around several objects in the graphic above indicates that those devices are supplied separately ...

  • Bosch Appliances VEZ-400 - page 24

    24 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Use a 2-wire (shielded ), half-dup lex, differential, multi-drop with the following attributes: Ta b l e 6 . 1 RS-485 Wire Specifications The following table shows the termin al connections for the 2- pin terminal block RS-485 connecti ...

  • Bosch Appliances VEZ-400 - page 25

    VEZ-400 Mini PTZ Dome Connection | en 25 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 6.2 Video Connection Coaxial cable terminated with a male BNC connector is the most common method for transm itting composite video from the camera to a monitor. If the head end device features built in video termination then no term ina ...

  • Bosch Appliances VEZ-400 - page 26

    26 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Connecting the Alarms Use the following table to conn ect alarm wires to the 8-pin terminal block from the c amera: Ta b l e 6 . 4 8-pin T erminal Block Connections 6.4 Po wer Connections The recommended power cable is a 2-conductor, 1 ...

  • Bosch Appliances VEZ-400 - page 27

    VEZ-400 Mini PTZ Dome Connection | en 27 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Figu re 6.2 Dome Camera Switc hes Figu re 6.3 Close-up of Ro tar y Switche s and Dip Switche s CAUTION! To prevent humidity problems, the camera’s dome cover must be removed only in dry conditions. CAUTION! When (re)mounting the dome c ...

  • Bosch Appliances VEZ-400 - page 28

    28 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 6.5.1 Setting the address (ID) of the camera To prevent faulty operations an d malfunctions, each camera must have an unique address (ID). The default setting is 0[ID001]. Ta b l e 6 . 5 Dome Camera ID Se t ting (Rotar y Switches S W30 ...

  • Bosch Appliances VEZ-400 - page 29

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 29 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7 On-Scre en Display (OSD) Menu When the camera is powered-up, the start-up screen appears on the monitor. 7.1 Basic Navigation and Common Actions Camera operators can operate the camera by two methods: – Use of hot ...

  • Bosch Appliances VEZ-400 - page 30

    30 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Command Action ▲ Move the joystick up to select an item. ▼ Move the joystick down to select an item. ◄ Move the joystick left to select options for an item. ► Move the joystick right to select options for an i ...

  • Bosch Appliances VEZ-400 - page 31

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 31 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.2 Main Menu The MAIN MENU provides access to all programmable settings for the camera. When you use Pelco-D and Pelco-P protocol with your controller, you can access the MA IN MENU on your monitor by pressing the key ...

  • Bosch Appliances VEZ-400 - page 32

    32 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.2.1 Editing Titles To edit the title of a function (preset, pattern, tour, scan): 1. Fro m the MAIN MENU , move the joystick to the right (setup menu of preset, pattern , tour, and scan). Move the joystick to the ri ...

  • Bosch Appliances VEZ-400 - page 33

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 33 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.2.2 Clearing Saved Functions To clear (delete) indi vidual, saved fun ctions: 1. Select a function in any menu (PRESET/TOUR/PATTERN/ SCAN/ALARM). 2. Move the joystick right. Select Clear. 3. If necessary, follow addi ...

  • Bosch Appliances VEZ-400 - page 34

    34 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Note the system information displayed. Note: The camera ID changes depending on settings. 7.3.2 Reboo t Reboot the system if there are an y problems with controlling or operating the camera. Rebooting will recycle ...

  • Bosch Appliances VEZ-400 - page 35

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 35 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the function to initialize: – ALL: Clear All items saved in the system. – CAM: Clear camera-related settings. – PRESET: Clear all saved presets. (To clear pres ets individually, refer to Section 7.7 Pre ...

  • Bosch Appliances VEZ-400 - page 36

    36 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the numbers th at comprise the password. 4. Press the key {Tele}. 5. Select the option "Enable." 6. Select the value "Enable." The system locks the password. 7.4 Display Setup From this m ...

  • Bosch Appliances VEZ-400 - page 37

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 37 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 2. Select OSD SETUP . The screen OSD SETUP appears. 3. Select the option "Label Position" to set/change the position of labels. 4. Select the value "On" to display the label position. 5. Press the b ...

  • Bosch Appliances VEZ-400 - page 38

    38 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Wide]. Bosch recommends setting th e size of the mask to be at least twice the size (height and width) of the object being masked. The speed of displaying masks is proportional to the number of masks on the screen . T ...

  • Bosch Appliances VEZ-400 - page 39

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 39 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.4.3 Image Setup This menu is for changing displayed image settings. To set up image setup: 1. From the MAIN M ENU , select DISPLAY SETUP . The submenu DISPLAY SETUP appears. 2. Select IMAGE SETUP . The screen IMAGE S ...

  • Bosch Appliances VEZ-400 - page 40

    40 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the option "MD/FD" to program motion detection and/or face detection. 4. Select the appropriate value: –O f f –M D –F D 5. Select the option "Sensitivity." 6. Select the appropriate ...

  • Bosch Appliances VEZ-400 - page 41

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 41 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the desired language: –E n g l i s h – Chinese –D u t c h –F r e n c h –G e r m a n – Italian – Russian –S p a n i s h 7.5 Camer a Setup From this menu, you can set th e focus/zoom, white bala ...

  • Bosch Appliances VEZ-400 - page 42

    42 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the option "Focus." 4. Select the appropriate value: –A u t o –M a n u a l –S e m i - A u t o 5. Select the option "Zoo m Sp d" to set the zoom speed. 6. Select the appropriate valu ...

  • Bosch Appliances VEZ-400 - page 43

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 43 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the option "Mode." 4. Select the appropriate value: – Auto Trace White balance (ATW): Aligns the white balance automatically. (2,300 to 11,000 K) – Indoor: 3200 K Base Mode – Outdoor: 5400 K B ...

  • Bosch Appliances VEZ-400 - page 44

    44 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. the Digital Slow Shutter (DSS) function is set higher automatically. To set auto exposure settings: 1. Fro m the MAIN MENU , select CAMERA SETUP . The submenu CAMERA SETUP appears. 2. Sel ect EXPOSURE . The screen AE ...

  • Bosch Appliances VEZ-400 - page 45

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 45 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1. From the MAIN M ENU , select CAMERA SETUP . The submenu CAM ERA SETUP appears. 2. Select DAY/NIGHT . The screen D/N SETUP appears. 3. Select the option "Day/Night." 4. Select the appropriate value: –A u ...

  • Bosch Appliances VEZ-400 - page 46

    46 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Fro m the MAIN MENU , select CAMERA SETUP . The submenu CAMERA SETUP appears. 2. Sel ect ADVA NCED . The screen ADVANCED SETUP appears. 3. Select the option "Sharpness." 4. Set the sharpness le vel. 5. Se ...

  • Bosch Appliances VEZ-400 - page 47

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 47 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the option "WDR Setup." 4. Select the value "On." 5. Select the option "WDR Level." 6. Set the appropriate level. 7. Select the option "DNR Setup." 8. Select the value ...

  • Bosch Appliances VEZ-400 - page 48

    48 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.6.1 Gener al Setup This menu controls general functions of the camera: power-up action, turbo speed, preset speed. To set these fu nctions: 1. Fro m the MAIN MENU , select DOME MOTION . The submenu DOME MOTION appea ...

  • Bosch Appliances VEZ-400 - page 49

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 49 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1. From the MAIN M ENU , select DOME MOTION . The submenu DOME MOTION appears. 2. Select MOTION SETUP . T he screen MOTION SETUP appears. 3. Select the option "Prop. Pan/Tilt." 4. Select the value "On&qu ...

  • Bosch Appliances VEZ-400 - page 50

    50 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Fro m the MAIN MENU , select DOME MOTION . The submenu DOME MOTION appears. 2. Sel ect HOME ACTION . The screen HOME ACTION SETUP appears. 3. Select the option "Action." 4. Select the appropriate value: ? ...

  • Bosch Appliances VEZ-400 - page 51

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 51 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.6.4 Calibration Calibration is a function for automatically correcting an error on the angle of Pan/Tilt. Calibration can be set at Auto or Manual. In Auto mode, the camera is co rrected automatically whenever there ...

  • Bosch Appliances VEZ-400 - page 52

    52 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.7 Preset Setup The camera has a maximum of 210 programmable preset positions. Each of the user-defined presets includes Pan/Tilt/ Zoom. To set up (program) a preset: 1. Fro m the MAIN MENU , select PRESET SETUP . Th ...

  • Bosch Appliances VEZ-400 - page 53

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 53 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.8 Pat tern Setup A Pattern is used to display (o r recall) a memorized, repeated and serial trace of pan, tilt, and zoom. The camera has a maximum of 8 Patterns in Pelco protocol mode, and 2 Patterns in Bosch protoco ...

  • Bosch Appliances VEZ-400 - page 54

    54 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.9 T our Se tup The camera has a maximum of 8 Tours in Pelco protocol mode, and 2 Tours in Bosch protocol mode. Each tour can have 28 configurable items. Each item can be a pre-defined preset, pattern, and scan in To ...

  • Bosch Appliances VEZ-400 - page 55

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 55 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.10 Scan Setup An Auto scan is a PTZ function that moves the camera from one position to another position. The camera has a maximum of 8 programmable scans. The speed of Auto Scan can be changed from 1 to 35 degree/se ...

  • Bosch Appliances VEZ-400 - page 56

    56 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 13. Select the option "DTime" to set the dwell time for the scan. 14. Set the desired time (fro m 3 minute to 60 seconds). 15. Select the option "Direction." 16. Select the appropriate value for th ...

  • Bosch Appliances VEZ-400 - page 57

    VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 57 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the approp riate alarm number. 4. Select the option "In" to select the alarm input type. 5. Select the appropriate value: N.O. (Normally Open) or N.C. (Normally Closed). 6. Select the option "O ...

  • Bosch Appliances VEZ-400 - page 58

    58 en | T roub leshoo ting VEZ-400 Mi ni PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 8 T roubleshoo ting If problems occur, check th e installation of the camera with the instructions in this manual. Re fer to this guide for further information. Problem Solution No video on screen. - Verify that the power is con ...

  • Bosch Appliances VEZ-400 - page 59

    VEZ-400 Mini PTZ Dome T roubleshooting | en 59 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Camera is not working properly (including wrong position of camera). - Power-cycle the camera and power supply, or reset the camera using the configuration menu [Main > System > Reboot]. - Check the con nection of the power c ...

  • Bosch Appliances VEZ-400 - page 60

    60 en | T echnical Specif ications VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 9 T echnical Specifications Camera Module Imager 1/4" Double Scan, Super HAD CCD Effective Pixels NT SC: 976(H)*494(V), PAL: 976(H)*582(V) Resolution 600 TVL Zoom ratio 26X Effect ive Opt ical Zoom/10X Digital Zoom ( ...

  • Bosch Appliances VEZ-400 - page 61

    VEZ-400 Mini PTZ Dome T echnical Specifications | en 61 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Power Consumption 24 VAC, 85 0mA / 20W (without heater)24 VAC, 2A / 45W (with heater) Alarm Input 4 Normal Dry Contact (Selectable NC/NO) Alarm Output 1 Normal Relays 5VDC/40mA Max (Selectable NC/NO) Control RS-485 baud ra ...

  • Bosch Appliances VEZ-400 - page 62

    62 en | Dimensions VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 10 Dimensions Figure 10.1 Dimensions - Camera Figure 10.2 Dimensions - Mounting Holes Ø112 (4.41) Ø151.3 (5.96) Ø154 (6.06) 26 (1.02) 79 (3.11) 138 (5.43) mm (in.) 4-Ø4.8 (0.19) 85.6 (3.37) 85.6 (3.37) mm (in.) ...

  • Bosch Appliances VEZ-400 - page 63

    VEZ-400 Mini PTZ Dome Bosch Prot ocol | en 63 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 11 Bosch Pro tocol The following table lists camera functions in Bosch protocol. Preset Key Preset Number Example Function Activate/ Deactivate Command Example Auto Scan 1 On/Off Scan 1 ON+1+Enter Auto Scan 2 On/Off Scan 2 ON+2+Ente ...

  • Bosch Appliances VEZ-400 - page 64

    64 en | Bosch Prot ocol VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. * SW Version Number displays 5seconds. *OSD message “D.ZOOM” in D.Z range displays 2 seconds. Pre-Position Recall Shot Preset 1-99 Shot+99+En ter Set-recalibrate Home Position Set Run Calibration Set+110+Enter Restores all setti ...

  • Bosch Appliances VEZ-400 - page 65

    VEZ-400 Mini PTZ Dome Pelco Pr otocol | en 65 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 12 Pelco Pro tocol The following table lists camera functions in Pelco protocol. Preset Key Preset Number Operation Example Preset Preset 1-59, 101-250 No.+Preset 1+Preset Preset shortcut saving * Preset 1-59, 101-250 ** Run PAN Pre ...

  • Bosch Appliances VEZ-400 - page 66

    66 en | Pelco Pro tocol VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. ...

  • Bosch Appliances VEZ-400 - page 67

    ...

  • Bosch Appliances VEZ-400 - page 68

    Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2011 ...

Manufacturer Bosch Appliances Category Security Camera

Documents that we receive from a manufacturer of a Bosch Appliances VEZ-400 can be divided into several groups. They are, among others:
- Bosch Appliances technical drawings
- VEZ-400 manuals
- Bosch Appliances product data sheets
- information booklets
- or energy labels Bosch Appliances VEZ-400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bosch Appliances VEZ-400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bosch Appliances VEZ-400, service manual, brief instructions and user manuals Bosch Appliances VEZ-400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bosch Appliances VEZ-400.

Similar manuals

A complete manual for the device Bosch Appliances VEZ-400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bosch Appliances VEZ-400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bosch Appliances VEZ-400.

A complete Bosch Appliances manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bosch Appliances VEZ-400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bosch Appliances VEZ-400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bosch Appliances VEZ-400, that we can find in the current document
3. Tips how to use the basic functions of the device Bosch Appliances VEZ-400 - which should help us in our first steps of using Bosch Appliances VEZ-400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bosch Appliances VEZ-400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bosch Appliances VEZ-400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bosch Appliances VEZ-400?

Use the form below

If you did not solve your problem by using a manual Bosch Appliances VEZ-400, ask a question using the form below. If a user had a similar problem with Bosch Appliances VEZ-400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)