Manual TOA Electronics TX2

9 pages 0.15 mb
Download

Go to site of 9

Summary
  • TOA Electronics TX2 - page 1

    ELECTRONIC LOUDSPEAKER SYSTEM CONTROLLER TX2 USER MANUAL ...

  • TOA Electronics TX2 - page 2

    1 Contents INTRODUCTION 2 OPER ATING INSTRUCTIONS 2 Preliminary advice and information 2 Input connections 3 Output connections 3 Operation with and without a sub-bass system 3 SERVICING 5 Fuse replacement 5 List of spare parts 5 Warranty 5 TECHNICAL SPECIFIC ATIONS 6 Declaration of Conformity 7 ...

  • TOA Electronics TX2 - page 3

    2 INTRODUCTION Thank you for purchasing the Tannoy TX2 loudspeaker system controller. The TX2 is an advanced electronic controller intended to optimise the performance of Tannoy loudspeaker systems. It can be used in full range mode where it performs equalisation functions, extending the low frequency response of the system significantly. Also, it ...

  • TOA Electronics TX2 - page 4

    3 Input connections. As with other devices of its type, the TX2 controller is inserted in the audio chain between the last link of audio source (mixing console, preamp, CD player, etc.) and the power amplifiers. The two audio inputs are the 3 pin female XLR connectors on the rear panel, marked L for left and R for right. On each connector the signa ...

  • TOA Electronics TX2 - page 5

    4 Figure 3 . TX2 front panel The way the TX2 operates with and without the sub-bass system can be seen on the simplified block diagram of Fig. 4. When the front panel push-button (left side of the SUB-BASS window) is depressed, the main - left and right - channels operate full range with the signal passing through the LF EQ section, resulting in an ...

  • TOA Electronics TX2 - page 6

    5 SERVICING If servicing is required, it must only be carried out by qualified personnel. Do not remove the top cover as there may be a risk of electric shock. Fuse replacement. Disconnect the TX2 from the mains power supply, and pull back the fuse drawer located at the bottom of the mains input. (A small screwdriver might be helpful.) The fuse dra ...

  • TOA Electronics TX2 - page 7

    6 TECHNICAL SPECIFICATIONS Inputs Two electronically balanced inputs on 3 pin XLR connectors. Input impedance 10 k Ω . Outputs Three electronically balanced outputs on 3 pin XLR connectors. (Left, Right and Mono Sub) Output impedance 50 Ω . Max. level +20 dBV. Hum and Noise -90 dBV, 20 Hz - 20 kHz unweighted Controls and Indicators Power on LED ...

  • TOA Electronics TX2 - page 8

    7 Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is desi ...

  • TOA Electronics TX2 - page 9

    Tannoy Loudspeakers are manufactured in Great Britain by : Tannoy Limited, Coatbridge, ML5 4TF. SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Internet:http://www.tannoy.com TGI/Tannoy, 300 Gage Avenue, Kitchener, Ontario, CANADA, N2M 2C8 Telephone: (519) 745 1158 Fax: (519) 745 2364 Tannoy Nederland BV, Anthonetta Kuijlstraat 19, 3 ...

Manufacturer TOA Electronics Category Home Theater System

Documents that we receive from a manufacturer of a TOA Electronics TX2 can be divided into several groups. They are, among others:
- TOA Electronics technical drawings
- TX2 manuals
- TOA Electronics product data sheets
- information booklets
- or energy labels TOA Electronics TX2
All of them are important, but the most important information from the point of view of use of the device are in the user manual TOA Electronics TX2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TOA Electronics TX2, service manual, brief instructions and user manuals TOA Electronics TX2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TOA Electronics TX2.

A complete manual for the device TOA Electronics TX2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TOA Electronics TX2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TOA Electronics TX2.

A complete TOA Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TOA Electronics TX2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TOA Electronics TX2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TOA Electronics TX2, that we can find in the current document
3. Tips how to use the basic functions of the device TOA Electronics TX2 - which should help us in our first steps of using TOA Electronics TX2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TOA Electronics TX2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TOA Electronics TX2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TOA Electronics TX2?

Use the form below

If you did not solve your problem by using a manual TOA Electronics TX2, ask a question using the form below. If a user had a similar problem with TOA Electronics TX2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)