English dropdown-ico

Manual Zhone Technologies Z-PLEX-10-24-DOC-SC

101 pages 0.94 mb
Download

Go to site of 101

Summary
  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 1

    Z-Plex 10 User ’s G uide Model Number: Z-PLEX-10-24-DOC-SC June 2000 Zhone Technolog ies ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 2

    Model No. Running Head Trade mark s: SECHTOR 300 and Z-Plex are registered trademar ks of Zhone Tech nologies Zhone and th e Zhone logo are regis tered trademarks of Zhone Technolog ies All other trademarks and registered trademar ks are the property of their respective holders. COPYRIGHT © 2000 Zhone Technologies. All rights reserved. This public ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 3

    REGULATORY INFORMATION Federa l Comm un ic at i on s Comm is s io n (F CC) Part 15 Regula tion For T elephon e Equipme nt The produc t described herein h as been test ed and found to comply wi th the limi ts fo r a Class “A” D igita l Devi ce, pursu ant to Part 15 of th e FCC R ules. Thes e limi ts are de sig ned to provi de reasonab le protec ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 4

    Model No. Running Head If this equipment (Z-Plex 10) cause s harm to the t elephone n etwork, the telephone compa ny will not ify you in advance th at tempora ry discontin uance of s ervice may b e require d. But if advance no tice isn ’ t p ractical, t he tele phone company will notify th e customer as soon as possibl e. Also, you will be advise ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 5

    Repairs t o certifi ed equipment sh ould be made b y an author ized Canadi an maintenance facili ty design ated by th e supplier . Any repairs or alter ations made by the user t o this equipme nt, or equi pment malfunct ions, may giv e the tel ecommunicati ons company c ause to request the user to disconn ect the eq uipment. Users shou ld ensure fo ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 6

    Model No. Running Head ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 7

    Zhone Technol ogies / vii Contents Contents Chapter 1 Introdu ction 1.1 Product overv iew ..................... ........................... .................. .......................... 1-1 1.2 Features ........ ........................... ........................... ........................... ................. 1-2 1.3 Benefits .................. ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 8

    viii Zhone Technologies Model No. Running Head Contents 3.4 Alarm ................ ........................... ........................... ........................... ............ 3-5 3.5 Grounding requi rements ....................... ........................... ........................... ... 3-6 3.6 Cabling .............. ..................... ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 9

    Zhone Techno logies / ix Contents Appendi x A Alphab etical Refer ence A.1 Parameter re ference ................................... ........................... ......................... A-1 A.1.1 Configurat ion groups .................... ........................... ........................... ....... A-2 A.1.2 Alphabetic reference ................ ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 10

    x Zhone Technologies Model No. Running Head Contents ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 11

    Zhone Technologi es / 1-1 Introduction Product overvi ew Chapter 1 Introduction This chapt er intr oduces you t o the featur es and bene fits of the inte grated acces s soluti on that pe rmits voice and data inte gration in a single u nit. It incl udes the f ollowing topi cs: Product o verview page 1-1 Features page 1-2 Benefits page 1-2 TR-08 page ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 12

    1-2 Zhone Technologies Model No. Running Head Features Introducti on 1.2 Featur es • V oice and data ch annel bank wi th integ ral CSU/DSX interfa ce • Sleek, l ow profile, one rack unit (1 RU) chassi s • From 12 to 1 6 FXS analog vo ice ports • Up to 8 FXO por ts • One high sp eed V .35 data por t • Exte nsive dia gn osti cs • LED ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 13

    Zhone Technologi es / 1-3 Introduction Managing the Z-Plex When a T1 p ort is co nfigured for TR-08 format , the voic e channels assigned to this port are identif ied by channel number (ac cording to t he TR-TSY -000008 doc ument), whic h may be dif ferent fr om the T1 time slot number . The product su pports onl y Shelf A. The re lation between a ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 14

    1-4 Zhone Technologies Model No. Running Head Product spe cifications Introduction • T1 config uration, performance st atisti cs, alarm c onditions, an d diagnost ics. • FXS/FXO confi guration, status, and d iagnostics. • Data port configur ation, st atus, and diagnostics . • General chassis man agement, field upgrad es, and alarms. 1.5.2 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 15

    Zhone Technologi es / 1-5 Introduction Product specifications T1 int erface Physical Fram e f ormat Line c ode Line e qualizat ion CSU li ne bu ild O ut ( L BO) DSX line length Cloc king FDL Input leve l TR08 supp ort Diagno stics T wo RJ48 D4, ESF , SLC9 6 (TR -08) AMI, B8ZS 0 to 133 ft., 134 to 266 ft ., 267 to 533 ft., 534 to 655 ft. 0 dB, -7.5 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 16

    1-6 Zhone Technologies Model No. Running Head Product spe cifications Introduction ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 17

    Zhone Technologi es / 2-1 Installing the Z-Plex Product descr iption Chapter 2 Installing the Z-Plex This chapt er gives you quick, simple i nstruction s to get yo u up and runn ing. Y ou will also learn ho w to instal l and mount the produc t. This chap ter includ es the fol lowing top ics: Product d escript ion page 2 -1 Unpacking the produc t pa ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 18

    2-2 Zhone Technologies Model No. Running Head Unpacking the produ ct Install ing the Z-Plex 2.1.2 Fr ont panel The Z-Plex front pan el provid es LEDs for moni toring the status of the unit . 2.2 Un pac ki ng the pr oduct This prod uct is shipped as a complete pac kage that incl udes this user ’ s guide. Af ter unpack ing the car ton , check to ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 19

    Zhone Technologi es / 2-3 Installing the Z-Plex Installing the product 2.2.4 Hard ware, cabli ng, and opti onal access ories The product comes packa ged with an AC power cord to p rovide power to the unit . It is also shipped wi th two angl e brackets a nd screws f or rack mounti ng. 2.2.5 Who to c all f or help Contact y our distr ibutor if a ny i ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 20

    2-4 Zhone Technologies Model No. Running Head Installing the product Instal ling the Z-Plex 1. Never ins tall te lephone wir ing during a lightnin g storm. 2. N ever i nst al l thi s prod uct in a wet locat ion . 3. Never inst all telep hone jacks in wet lo cat io ns unl ess the jack is speci ficall y desi gned for this pur pose only . 4. Never t ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 21

    Zhone Technologi es / 2-5 Installing the Z-Plex Rack mounting 2.4 Rack mounting The product chassis comes with b rackets for rack mounting; and the ch assis is designed to accommodate brackets for front ce nter or r ear mounting. T he instal lation sit e for rac k mounting sh ould provide p roper roo m for venti lation and ca ble routing . Note: Ch ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 22

    2-6 Zhone Technologies Model No. Running Head Locating the product on a desktop Install ing the Z-Plex 2.5 Locating the pr oduct on a desktop Each unit can be eas ily set o n top of a d esk or table. A stable e nvironment i s necess ary for peak perf ormance of each unit. The chassi s should be placed on a fl at, smooth surface, such as a tabl e, ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 23

    Zhone Technologi es / 3-1 Electric al Installati on Connector type Chapter 3 Electrical Installation When you ar e rea dy to go be yond t he basi cs of th e pro duct, u se this chapte r to lear n sp ecifics on groundi ng, cablin g, and the ne cessary p ower requireme nts for op eration. It inclu des the followin g topics: Connector type page 3 -1 D ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 24

    3-2 Zhone Technologies Model No. Running Head Data port connector pinouts Electrical Ins tallation 3.2 Data port connector pi nou ts T able 3-2 descr ibes the signals and p ins for t he V .35 data port . The pin assi gnments are associa ted with the u se of Zhone c able part nu mber PRM-000-012 61M (F). W AN 1 line RJ48 T ransmit and recei ve pai ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 25

    Zhone Technologi es / 3-3 Electric al Installati on Data port connect or pinouts Note: For pur poses of conne ction and f unction, the pr oduct should b e consider ed a DCE. 3.2.1 FXO/F XS conn ectors T able 3-3 lis ts the FXS/FXO conn ector pin outs. 13 Not Connected 14 T r ansmit Data B DTE S 15 T ransmit T iming B DCE Y 16 Re cei ve Data B DCE T ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 26

    3-4 Zhone Technologies Model No. Running Head Power requirements Electrical Ins tallation 3.2.2 RJ48 connec tor T able 3-4 lists the T1 RJ48 co nnector pinou ts. 3.3 Power requir ements The inst allation sit e should ha ve a 90-26 0V AC power r eceptacl e readily a vailable to powe r up the unit . The unit can als o be powered by -42 to 56 VDC. T ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 27

    Zhone Technologi es / 3-5 Electric al Installati on Alarm 3.3.1 Power instal lati on 3.3.1.1 AC power installation This prod uct is equ ipped with an AC r eceptacl e located on t he back of th e unit. 3.3.1.2 DC power installation When wiring to an external power source, such as a batte r y ra ck, fuse pa nel, or cir cuit bre aker , make sure t hat ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 28

    3-6 Zhone Technologies Model No. Running Head Groundi ng requirements Electrical I nstallation Note: Note that the Exte rnal Alarm Plug i s black in co lor , matching the r ecipr ocal blac k r ear panel r eceptacle . Figure 3-2. Alarm closure plug 3.5 Gr ounding re quirements Due to th e UL regula tory re quiremen ts, a mounting stud is requi red ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 29

    Zhone Technologi es / 3-7 Electric al Installati on Cabling Figur e 3-3. Groundin g the unit 3.6 Cabling T able 3-5 describ es the cab les reco mmended for use with the Z-Plex unit . T ab le 3-5. Recommend ed cables Cable Used fo r Manufactur er Part Num ber Description V oice FXS/FXO ports 800-0006 0-01 50-pin Amphenol ( M) to 50 pin Amphenol ( M) ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 30

    3-8 Zhone Technologies Model No. Running Head Cabling Electrical I nstallation ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 31

    Zhone Technologi es / 4-1 Configuring the Z-Plex Using the command line interfac e Chapter 4 Configuring the Z-Plex In this chapter y ou will le arn how to confi gure the Z-Plex uni t using th e CLI. It incl udes the followin g topics: Using the command line interface page 4-1 Quick sta rt syst em configurati on page 4-2 Configur ing SNMP page 4-6 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 32

    4-2 Zhone Technologies Model No. Running Head Quick start sys tem co nfiguration Configuring the Z-P lex SET T1CFG:STATE:1:ACTV T o read the cu rrent frame sli ps on the first T1 li n e, en ter the follo wing comm and: GET PMCUR:SLIP:1 Keep in mind the fo llowing i mportant i nformation : • The CLI is case sensit ive . • Keyword s must be ent ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 33

    Zhone Technologi es / 4-3 Configuring the Z-Plex Quick star t system configuratio n 3. Change the default user password. For example: user> SET USER:PASSWD:zplex321 The passwor d can be from 7 to 12 charac ters long. The password is used any time you lo g into t he Z-P lex u nit t o mana ge it . 4. Configur e SNMP agent addre sses, community str ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 34

    4-4 Zhone Technologies Model No. Running Head Quick start sys tem co nfiguration Configuring the Z-P lex The fir st time you configure an IP address , you must reboot the syst em. 4.2. 1 L ogging in and out o f the syst em Y ou must log in to the syste m to manage it . Note that onl y one admini strative u ser can be logged in to t he Z-Plex un i ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 35

    Zhone Technologi es / 4-5 Configuring the Z-Plex Quick star t system configuratio n Configuring the loc al management channel The Z-Plex unit pr ovides an out-of -band RS232 seria l (craft) inte rface for ma naging the unit . T o acce ss the seri al por t, co nfigu re you r te rm inal inte rf ace so ftw a re wit h th e f oll ow in g settin gs: • ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 36

    4-6 Zhone Technologies Model No. Running Head Configuring SNMP Configuring the Z-Plex The foll owing example configures t he IP over FDL interf ace: user> SET CPUCFG:MASKFDL:1:255.255.255.252 user> SET CPUCFG:IPFDL:1:192.168.8.22 For most ap plications, the defau lt MTU of 1500 i s appropr iate. If you need to change it, use the MTUFDL co m ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 37

    Zhone Technologi es / 4-7 Configuring the Z-Plex Configuring T1 interfaces user> SET CPUCFG:IPHOST2:1:192.168.21.24 user> SET CPUCFG:IPHOST3:1:192.168.21.25 4.4 Configuring T1 interfaces The two T1 in terface s on the Z-P lex unit c an be used for either v oice or da ta, with the followin g restri ctions: • 24 voice ports are supporte d, an ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 38

    4-8 Zhone Technologies Model No. Running Head Configuring a T 1 drop and insert interfa ce Configuring the Z-Plex user> SET T1CFG:DS0:1:OFF 4.5 Configuring a T1 dr op and insert interface A T1 drop and insert take s some channe ls from an inc oming T1 int erface and dr ops some of them out to a PBX and th e rest to an outgoing dat a path. The ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 39

    Zhone Technologi es / 4-9 Configuring the Z-Plex Configuring FXO ports user> SET FXSCFG:TYPE:1:LSFD 6. Specify whether tr unk condit ioning is being used : user> SET FXSCFG:TRNKC:1:ON 7. Specify whether you want the Z- Plex unit to p rovide ri ngback. user> SET FXSCFG:RNGBK:1:ON The defaul t of OFF is appropriat e for cases when the networ ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 40

    4-10 Zhone Technologies Model No. Running Head Configuring the V.35 data port Configuring the Z-Plex user> SET FX0CFG:TS:2:7-15 5. Specify the FXO type: user> SET FX0CFG:TYPE:2:LS 6. Specify whether you want the Z- Plex unit to p rovide ri ngback. For example: user> SET FXOCFG:RNGBK:2:ON The defaul t of OFF is appropriat e for cases when ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 41

    Zhone Technologies / 4-11 Configuring the Z-Plex Adding and deleti ng routes 3. Specify the T1 int erface the d ata is com ing in on: user> SET DPCFG:WAN:1:2 4. Specify the number of channels : user> SET DPCFG:NCHAN:1:24 5. Specify the star t channel : user> SET DPCFG:SCHAN:1:1 6. The remai ning commands s pecify the operation control le a ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 42

    4-12 Zhone Technologies Model No. Running Head Adding and del eting routes Configuring the Z-Plex user> SET ROUTE:DLTNETRT: x:destination:gateway For example , the foll owing command de letes a network rou te (rout e number 2) f rom the 192.168. 0.0 network usin g the gate way 128.23.22.1: user> SET ROUTE:DLNETRT:1:192.168.0.0:128.23.22.1 4 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 43

    Zhone Technologies / 4-13 Configuring the Z-Plex Adding and deleti ng routes Figur e 4-1. Example routing configuration In the ex ample networ k in Figure 4- 1, the Z-Plex u nit A has two IP interfaces : a DS0 management i nterfac e with an addr ess of 128.23.0.1 ; and an Ethe rnet int erface with an address of 192.168.8 .22 and a net mask of 255.2 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 44

    4-14 Zhone Technologies Model No. Running Head Adding and del eting routes Configuring the Z-Plex T able 4-1expla ins the i nterfac es in the route table . T able 4-1. Route Display V alues 4.9.4.1 Displaying host r outes T o display inf ormation about all host r outes, enter the ROUTE:HOST ALL:x command. For exampl e: user> GET ROUTE:HOSTALL: ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 45

    Zhone Technologies / 4-15 Configuring the Z-Plex System maintenance commands user> GET ROUTE:HOST:1 >The Host Destination is: 192.168.21.32 >The Host Gateway is: 12.12.1.1 4.9.4.2 Displaying network r outes T o dis play inform ation about all host route s, enter the ROUTE:NET ALL:x command. For exam ple: user> GET ROUTE:NETALL:1 >Net ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 46

    4-16 Zhone Technologies Model No. Running Head System maintenance commands Configuring the Z-Plex BANK2 ->Software version : ZPLEX10_1.0.0#6 ->Checksum : 0x50a78d4c Active bank is 1 4.10. 3 Displayi ng times lot usage T o display inf ormation about the T1 ti meslot usag e, enter the following command: user> QUERYTS TS 24, WAN 1, SERVICE ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 47

    Zhone Technologies / 4-17 Configuring the Z-Plex System maintenance commands 4.10 .6 Acti vatin g code in ban k 1 T o activate t he code in bank 1, enter t he following c ommand: user> ACTIVEBANK1 4.10 .7 Acti vatin g code in ban k 2 T o activate t he code in bank 2, enter t he following c ommand: user> ACTIVEBANK2 4.10 .8 TFTP download ing T ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 48

    4-18 Zhone Technologies Model No. Running Head System maintenance commands Configuring the Z-Plex ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 49

    Zhone Technologi es / 5-1 Diagnostics T1 loopbacks Chapter 5 Diagnostics This chapt er describ es how to per form loopbacks on the Z-Pl ex unit inte rfaces. I t also describ es the sys tem ’ s LEDs. It i ncludes the f ollowing topi cs: T1 loopbacks page 5-1 BER testing page 5-3 Data port loopbacks page 5-4 FXO and FXS port s loopback page 5-6 LED ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 50

    5-2 Zhone Technologies Model No. Running Head T1 loopbacks Diagnostics Figur e 5-1. T1 loopbacks T o activate a loopback, e nter the following command: user> SET T1CFG:LOOPBACK: x :(LINEON/LOCALON) where x is the nu mber of the T1 inter face to loopb ack. T o end the loopba ck, enter the following command: user> SET T1CFG:LOOPBACK: x :(LINE ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 51

    Zhone Technologi es / 5-3 Diagnostics BER testing 5.2 BER testing The bit error rate (BER) test sends a data pat tern an d measures the bit error ra te on the selected interf ace. The Z-Plex supports BER t ests on enti re T1 lines or on indiv idual ti me slots. The BER test su pports th e following BER t est patter ns: • Quas i-ra n dom sign a l ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 52

    5-4 Zhone Technologies Model No. Running Head Data port loopbacks Diagnostics user> SET T1CFG:TSBERTOFF: x :(1-24) 5.3 Data port loopbacks The V .35 port sup ports li ne and loca l loopback s: • A line (n etwork) l oopback bre aks the tran smit signa l on the ne twork side bet ween th e data por t and the T1 interfa ce and loops th e data po ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 53

    Zhone Technologi es / 5-5 Diagnostics Testing FXO and FXS ports Figure 5-2. Data port loopbacks T o activate a data port lo opback, use t he following command: user> SET DPCFG:LOOPBACK:1:(LINE/LOCAL) T o de-activat e a data p ort loopback, u se the fo llowing comman d: user> SET DPCFG:LOOPBACK:1:OFF 5.4 T esting FXO and FXS ports The Z-Plex u ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 54

    5-6 Zhone Technologies Model No. Running Head Testing FXO and FXS ports Diagnos tics • Loopbacks • Settin g and viewin g the tran smit and re ceive ABCD sig naling bi ts • Settin g the tip a nd ring l eads • Read ing th e tip a nd r ing st atis ti cs 5.4. 1 FXO a nd FXS port s loopba ck The FXO/FXS port s support analog and digital lo opb ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 55

    Zhone Technologi es / 5-7 Diagnostics Testing FXO and FXS ports Figur e 5-3. FXO and FXS loopbacks 5.4.1.1 Configuring FXO loopbacks T o activate a n FXO port loopbac k, use the fol lowing command: user> SET FXOCFG:LOOP:1:(DGTL/ANLG) where x i s the number of the port t o loopback . T o de-activat e an FXO loopback, use the fo llowing comman d: ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 56

    5-8 Zhone Technologies Model No. Running Head Testing FXO and FXS ports Diagnos tics user> SET FXSCFG:LOOP:1:OFF 5.4.2 Using test mo de on t he FXO a nd F XS port s FXO and FXS port s can be se t to test mode , during whi ch you can: • Set and vi ew the tr ansmit and rec eive ABCD signa ling bits • Set the tip and ri ng leads • V iew the ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 57

    Zhone Technologi es / 5-9 Diagnos tics LED indicators 5.4.2.2 V iew ing the receive ABCD signalin g bits The RxAB (rec eive ABCD) set ting is a re ad-only para meter that displays th e ABCD pattern for tes ting the receive side of the ci rcuit. T o view the ABCD recei ve bit patt ern on an FXO po rt, enter the following c ommand: user> GET FXOTS ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 58

    5-10 Zhone Technologies Model No. Running Head LED indicators Diagnostics 5.5.2 Ethern et LED A single g reen LED indica tes the op erationa l status of the Ether net port. If the LED is blinkin g, the Ether net port is connected and trans mitting t raffi c. 5.5.3 W AN LEDs The W AN L EDs i ndica te the tran s miss ion sta tus o f the tw o T1 int ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 59

    Zhone Technologies / A- 1 Alphabetical Refe rence Parameter ref erence Appendix A Alphabetical Reference This chapt er pr ovid es a refe renc e to the Z-Ple x CLI param eters , com mand s, and synta x. It al so inclu des s yst em err or me ssag es. It incl u des th e fo llo win g topi cs: Parame ter refere nce page A-1 Command re ference page A-30 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 60

    A-2 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference DPCFG 1 Da ta port c onfigurati on, such as activ ati on and clo cki ng. LOOP MODE RNGBK R TLP RxAB ST A TE TEST TRCNTRL TRNKC TRST A T TS TTLP TxAB TYPE W AN F ARPMC UR 1 Curren t far en d stat isti cs for the T1 interf aces. ALLF ARCUR BES ES LOFC SES SLI ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 61

    Zhone Technologies / A- 3 Alphabetical Refe rence Parameter ref erence FXOT S T A s in gle va l ue between 1 and 24, or a ra nge of values. T est mode for FXO port s. RXAB TEST TRCNTRL TRST A T TXAB FXSCFG A single value between 1 and 24, or a ra nge of values. FXS por t configurat ion, incl uding stat e, mo d e, a nd t y pe. LOOP MODE RNGBK R TLP ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 62

    A-4 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference A.1.2 Alphabetic refer ence This sect ion conta ins an al phabetic reference t o all CLI pa ramete rs. PMTOT A single value between 1 and 24, or a ra nge of values. T o tal sta tistic s for t he T1 interf aces. ALL TOT BES ES LOFC SES SLI P UA SYSTEM 1 S ys ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 63

    Zhone Technologies / A- 5 Alphabetical Refe rence Parameter ref erence ALLCUR Displays ES, BES, UAS, SES, SLIP , and LOFC erro rs for t he current 15 minute inter val. Configurat ion gr oup: PMCUR Syntax: GET PMCUR:ALLCUR:x ALLFARCUR Displays ES, BES, UAS, SES, SLIP , and LOFC erro rs for t he current 15 minute inter val. Configurat ion gr oup: F A ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 64

    A-6 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference Syntax: GET PMTOT:ALLTOT:x BERT Activate s a bit err or rate tes t (BER T) on a T1 l ine. The BER test sends a da ta pattern a nd mea sures the bi t err or rate on t he sel ec ted time slot. Possi ble v alue s are: • OFF (defau lt): te rminates the BER te ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 65

    Zhone Technologies / A- 7 Alphabetical Refe rence Parameter ref erence CLKSRC Clocking s ource for T1 line. Possibl e values a re: • W AN1: Clo ck f or the T1 inter fac e deri ved fr om th e lin e rece iv e si gnal. • W AN2 • INTERNAL: Clocki ng received from internal 1.544Mhz S tratum 4 c lock. If the ext er nal clock fail s, the u nit s w i ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 66

    A-8 Zhone Tech nologies Model No. Running Head Parameter reference Alphabeti cal Reference Specify a value from 0 t o 100ms in mult iples of 10. Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:CTSD ELAY:1:(0-100) CUR Curr ent T 1 near-en d st at isti cs. P os sib le val u es ar e: • ES (err ored sec onds): indica tes the total number of se ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 67

    Zhone Technologies / A- 9 Alphabetical Refe rence Parameter ref erence DSR The Data Set Ready (DSR) o ption allows y ou to define wh ether the V .35 port DSR control lead shou ld be held on (high) or of f (low). Poss ible v alues are : • ON: • OFF (defau lt): Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:DSR: 1:(ON/OFF) ERRINS Spec ifies ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 68

    A-10 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • W AN 2 does not support FDL. Configurat ion gr oup: T1CFG Syntax: (GET/SET) T1CFG:FDL: X:(ANSI/ATT/OFF) FDL_IP Specifi es whether the FDL over IP management interf ace is en abled. FDL is a 4 Kbps channel normally used to manag e the T1 link. Whe n the ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 69

    Zhone Techn ologies / A-11 Alphabetical Refe rence Parameter ref erence Notes • If you ar e connecting to Premisy s IMACS on DS0 mgmt chan nel (time slot 24), set HDLC to HDR_OFF . • HDR_ON is compat ible with the Cisco impl ementation of HDLC headers. • Note that DS0 i s only val id on W AN 1. Configurat ion gr oup: T1CFG Syntax: (GET/SET) T ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 70

    A-12 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference LINELEN Specifi es the CSU line build out o r the DSX li ne length. For a CSU, possi ble valu es are: • 00 (0dB ) • N75 ( -7.5dB ) • N15 ( -15.0d B ) • N22 (-22.0d B) For a DSX, poss ible values are: • D0 (0-132 f eet) • 133 (133- 265 feet) • ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 71

    Zhone Techn ologies / A-13 Alphabetical Refe rence Parameter ref erence • ANLG: during a digi tal l oop back, t he inco ming digi tal DS0 si gnal i s sent back t o the far end witho ut decodin g it. Configurat ion gr oup: FXOCFG Syntax: (GET/SET) FXOCFG:LOO P:n:(OFF, DGTL, ANLG) LOOP (FXS) Loopback fo r the FXS por t. Possibl e values are: • OF ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 72

    A-14 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference MASK Syst em ne twor k mas k. Configurat ion gr oup: CPUCFG Syntax: (GET/SET) CFG:MASK:1 :(net mask) MASKFDL Network mask used fo r IP over FDL traff ic. Configurat ion gr oup: CPUCFG Syntax: (GET/SET) CPUCFG:MAS KFDL:1:(net mask) MASKHDL Network mask used ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 73

    Zhone Techn ologies / A-15 Alphabetical Refe rence Parameter ref erence MODE (FXS) FXS supervi sion mode. The Mod e setting sh ould be deter mined by the typ e of equip ment to which you are connecting to the port. All opt ions use two- wire balanced co nnections . Possible valu es ar e: • FXS (defau lt): For eign exchange s ubscribe r . This opt ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 74

    A-16 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference NCHAN Spec ifies the nu mbe r of ti me slo ts o nto whi ch da ta fr om th e T1 li ne wi ll be m appe d. No te tha t starti ng time sl ots must also be select ed for each da ta port. Channels must be contig uous. Possible values are f rom 1 to 24. Th e defau ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 75

    Zhone Techn ologies / A-17 Alphabetical Refe rence Parameter ref erence RLSD The Receive Level Sign al Detect (RLSD) option al lows you to define whe ther the RLS D cont rol lea d is he ld ON (hig h) or O FF (l o w). Poss ible v alues are : • ON: • OFF (defau lt): Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:RLSD :1:(ON/OFF) RNGBK Speci ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 76

    A-18 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference RTLP (FXS) The R TLP setting cont rols the amount of gain or loss ad ded to the incoming si gnal after it is decoded t o analog. T o incre ase the s ignal level , set the R TLP setting t o a positi ve value (t he lar g e r t he num be r , the m ore ga in is ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 77

    Zhone Techn ologies / A-19 Alphabetical Refe rence Parameter ref erence SCHAN Spec ifies the f ir st T 1 t ime s lot tha t da ta fro m the da ta por t will be ma pped . Configurat ion gr oup: DPCFG Syntax: (GET/SET) DPCFG:SCHA N:1:(1-24) SES SES (sever ely err ored seco nd): indica tes the total numbe r of sec onds in which the bit error r ate exce ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 78

    A-20 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference STATE (T1 drop and ins ert) S tate of T1 dr op and inse rt ports. Pos sible val ues are: • ACTV • STDBY Configurat ion gr oup: T1CFG Syntax: (GET/SET) T1CFG:STAT E:1:(ACTV/STDBY) ST ATE ( FXO ) S tate of FXO port s. Possibl e values ar e: • ACTV • S ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 79

    Zhone Techn ologies / A-21 Alphabetical Refe rence Parameter ref erence SYSCONTACT System cont act info rmation. Enter a strin g of up to 25 cha racters . Note that spa ces are no t allowed. Configurat ion gr oup: SYSTEM Syntax: (GET/SET) SYSTEM:SYS CONTACT:(String) SYSDESCR System descr iption informat ion. Enter a strin g of up to 25 charac ters. ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 80

    A-22 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • OFF (defau lt) • ON Configurat ion gr oup: FXOCFG Syntax: (GET/SET) FXOTST:TES T:n:(ON/OFF) TEST (FXS) T est sh ows if the po rt is in the test m ode. P ossib le v a lues a re: • OFF (defau lt) • ON Configurat ion gr oup: FXSTST Syntax: (GET/SET) ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 81

    Zhone Techn ologies / A-23 Alphabetical Refe rence Parameter ref erence • LOOP: T ip and Ring le ads are tie d together . • OPE N : Ring lea d is no t con ne cte d to ei th er th e T ip or to g round . • RING_GND: the Ri ng lead is gr ounded. Configurat ion gr oup: FXOCFG TRCNTRL (FXS) The T ip and Ri ng Control s pecifies t he tip and r ing ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 82

    A-24 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • OFF • ON (defaul t) Configurat ion gr oup: FXSCFG Syntax: (GET/SET) FXSCFG:TRN KC:n:(OFF, ON) TRSTAT (FXO) The T ip and Ring S tatus info rmation field describe s what the a ttached device is doing with the T ip and Ri ng leads of the FXO port. Poss i ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 83

    Zhone Techn ologies / A-25 Alphabetical Refe rence Parameter ref erence Figure 5- 4 illustrat es how to determ ine the TS value if you want to use t he first four t ime slots for drop and inser t ( 0000000f ). Figur e 5-4.Time slot assignment for dr op and insert Configurat ion gr oup: T1CFG Syntax: (GET/SET) FXSCFG:TS: n:(00000000-ffffffff) TS ( F ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 84

    A-26 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference Syntax: (GET/SET) FXSCFG:TS: n:(1-24) See also: W AN (FXS) TSBERTOFF De-a ctiva tes a B ER te st on the s p ecif ie d ch a nne l. Poss ible v alues are : • 1-24 Configurat ion gr oup: T1CFG See also: BER T , P A TTERN Syntax: (GET/SET) T1CFG:TSBE RTOFF:X: ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 85

    Zhone Techn ologies / A-27 Alphabetical Refe rence Parameter ref erence level, s et the TTLP s etting to a positive val ue (the more po sitive t he number , the more th e signal l evel is decreased). Fo r example, a n incoming sign al at -5 d Bm can be incr eased to - 2 dBm by setti ng the TTLP to - 3 dB. The TTLP range i s -9.0dB to 3.0dB. Th e de ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 86

    A-28 Zhone Technologies Model No. Running Head Parameter reference Alphabeti cal Reference • LPFD (Loop start-for ward disco nnect): Prov ides disc onnect when FXS is connec ted to voice mes saging sys tem. • GS (Gr oun d star t): Used with two-way PBX trunks. • GSA (G roun d st a rt au to mati c): Used with equipme nt requir ing fast respo ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 87

    Zhone Techn ologies / A-29 Alphabetical Refe rence Parameter ref erence TYPE T ype of T1 i n terf ace. Possi ble va lue s a re: • DSX: Z-Plex presents DSX characteri stics. • CSU: (defa ult) Z-Pl ex presen ts CSU characte ristic s. Configurat ion gr oup: T1CFG Syntax: (GE T/SET) T1CFG:TYPE:X:(CSU/DSX ) UAS UAS (unavail able sec ond): indi cates ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 88

    A-30 Zhone Technologies Model No. Running Head Command reference Alphabetical Referenc e WAN (FXS) The T1 W AN interfa ce used to provide FXS ser vice. The de fault is W AN 1. Configurat ion gr oup: FXSCFG Syntax: (GET/SET) FXSCFG:WAN :n:(1/2) See also: TS (FXS) A.2 Command r efer ence This sectio n pro vide s a refe renc e for th e Z-P lex C LI ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 89

    Zhone Techn ologies / A-31 Alphabetical Refe rence Error messages QUERYHALARM Displays a list of hi story alar ms. REBOOT Rebo ots th e sy s tem. TFTPDLD This command initiates a TFTP download. It prompts for the IP addres s of the se rver , the code bank to down load the im age to, and the filename o f the softwar e image. A.3 Err or messages T ab ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 90

    A-32 Zhone Technologies Model No. Running Head Error message s Alphabetical Reference Loopback typ e mismatch User tr ied to deact ivate a l ine loopb ack while l ocal loop back is active. NCHAN set to 0 pl ease configure the numbers of channels User trie d to confi gure the sta rting channe ls (SCHAN) with out configuri ng number of cha nnels (N ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 91

    Zhone Techn ologies / A-33 Alphabetical Refe rence CLI referenc e A . 4 C L I re f e re n c e The basic CLI commands ar e divided int o the followi ng categori es: • Basi c co nt rol comma nds • Movement and s earching commands • Insert and change commands • Dele te com m and s • Put and un do commands The foll owing secti ons describe th ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 92

    A-34 Zhone Technologies Model No. Running Head CLI reference Alphabetical Referenc e A.4.2 Movemen t and sear ch commands T able A-5 descr ibes the movement and sear ch commands. T able A-5. Movement and search commands Command Descript ion n G Go to command n . / string Search for th e specifi ed string ba ckward in t he histor y buf fer . ? str ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 93

    Zhone Techn ologies / A-35 Alphabetical Refe rence CLI referenc e A.4. 3 Inse rt and ch ange co mmands T able A-6 descr ibes the ins ert and ch ange commands. 0 Move curso r to the b eginning of t he line. ^ Move curso r to the fi rst non-bl ank charact er . f c Search forward fo r the char acter c . F c Search backward for the char acter c . T abl ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 94

    A-36 Zhone Technologies Model No. Running Head CLI reference Alphabetical Referenc e A.4.4 Delete c ommands T able A-7 descr ibes the del ete commands. A.4.5 Put and undo comman ds T able A-7 descr ibes the put and undo commands . n r c R eplace following n charact ers with c. ~ T oggle cas e, lower to upper , or upper to lower . T able A- 7. Del ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 95

    Zhone Techn ologies / A-37 Alphabetical Refe rence CLI referenc e u Undo last command. T able A-8. Put and undo commands (Continued) Command Descript ion ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 96

    A-38 Zhone Technologies Model No. Running Head CLI reference Alphabetical Referenc e ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 97

    Zhone Technologi es / Index -1 Index A AC po w er, i nsta l lati on 3-5 access ing th e serial por t 4-5 acces sor ie s, de scri b ed 2-3 ACTIVEBANK1 command A-30 ACTIVEBANK2 command A-30 admi nist ra tiv e user s login a ccess 4-4 alar m LED 5-9 alar ms des crib ed 3- 5 ALLCUR paramete r A-5 ALLFARCUR paramete r A-5 ALLFARINT parame ter A-5 ALLFAR ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 98

    Index- 2 / Zhone Technolog ies D data por t defini ng drop and ins ert chann els A-24 data p ort l o opb a ck 5-4 activa ting 5-5 diagnos ing 5-4 DATE command A-30 DC po w er, i nsta l lati on 3-5 defau lt MT U 4-6 defau lt pa sswo rd 4-4 defau lt us ern a me 4- 4 des ktop placin g unit on 2-6 DPCFG A-2 Drop and i nsert defini ng channel s A-24 DS0 ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 99

    Zhone Technologi es / Index -3 L latchi ng loo pbac k detec tion 5-1 LED Eth ernet 5-10 LED indica tors 5-9 Eth ernet 5-10 T1 5-10 WAN 5-3 LED s des crib ed 5- 9 Eth ernet 5-10 Powe r 5- 10 line l oopbacks 5-1 LINELEN para meter A-12 local loo pbacks 5-1 local manag ement channel 4-5 LOFC pa ram eter A-12 logging in 4-4 defau lt pa sswo rd 4-4 defa ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 100

    Index- 4 / Zhone Technolog ies read co mmunity st rings 4-6 SNMP tr ap re c ipien ts specif ying 4-6 SNM P trap s alar ms 4-6 enabl ing 4-6 spec ificat ions cabli ng 3-7 powe r 1-4, 3-4 temp eratu re 2-3 Z Pl ex 1-4 STATE (FXO) par ameter A-20 STATE (FXS) pa rameter A-20 STATE (T1 drop and in sert) param eter A-20 STATE (T1 ) parameter A-20 STATE ( ...

  • Zhone Technologies Z-PLEX-10-24-DOC-SC - page 101

    Zhone Technologi es / Index -5 WAN LED green bli nking 5-3 WAN parame ter A-29 Y yell o w alar ms 4-6 Z Z Pl ex bene fits 1-2 featu res 1-2 management of 1-3 ove rview 1-1 power re quirements 3-4 spec ificat ions 1-4 ...

Manufacturer Zhone Technologies Category Network Card

Documents that we receive from a manufacturer of a Zhone Technologies Z-PLEX-10-24-DOC-SC can be divided into several groups. They are, among others:
- Zhone Technologies technical drawings
- Z-PLEX-10-24-DOC-SC manuals
- Zhone Technologies product data sheets
- information booklets
- or energy labels Zhone Technologies Z-PLEX-10-24-DOC-SC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zhone Technologies Z-PLEX-10-24-DOC-SC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zhone Technologies Z-PLEX-10-24-DOC-SC, service manual, brief instructions and user manuals Zhone Technologies Z-PLEX-10-24-DOC-SC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zhone Technologies Z-PLEX-10-24-DOC-SC.

Similar manuals

A complete manual for the device Zhone Technologies Z-PLEX-10-24-DOC-SC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zhone Technologies Z-PLEX-10-24-DOC-SC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zhone Technologies Z-PLEX-10-24-DOC-SC.

A complete Zhone Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zhone Technologies Z-PLEX-10-24-DOC-SC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zhone Technologies Z-PLEX-10-24-DOC-SC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zhone Technologies Z-PLEX-10-24-DOC-SC, that we can find in the current document
3. Tips how to use the basic functions of the device Zhone Technologies Z-PLEX-10-24-DOC-SC - which should help us in our first steps of using Zhone Technologies Z-PLEX-10-24-DOC-SC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zhone Technologies Z-PLEX-10-24-DOC-SC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zhone Technologies Z-PLEX-10-24-DOC-SC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zhone Technologies Z-PLEX-10-24-DOC-SC?

Use the form below

If you did not solve your problem by using a manual Zhone Technologies Z-PLEX-10-24-DOC-SC, ask a question using the form below. If a user had a similar problem with Zhone Technologies Z-PLEX-10-24-DOC-SC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)