English dropdown-ico

Manual Casio TE-2400

240 pages 0.88 mb
Download

Go to site of 240

Summary
  • Casio TE-2400 - page 1

    Eu Di U .K. CI Canada ELECTR ONIC CASH REGISTER TE-2200 TE-2400 DEALER'S MANUAL V ersion 1.0 August 2005 ...

  • Casio TE-2400 - page 2

    2 Introduction & Contents This manual is intended to be used as a reference to the TE-2200 and TE-2400 system. It pro vides details to allow whole understanding of the system capabilities, its operation, and ho w it can be used to solve man y problems within the retail outlet. This manual consists of the follo wing chapters: 1. Hardware configu ...

  • Casio TE-2400 - page 3

    TE-2200/2400 Dealer's Manual 3 System configuration ........................................................................................ 11 Hard ware configuration .............................................................................................. 11 General configuration ......................................................... ...

  • Casio TE-2400 - page 4

    4 Introduction & Contents Address code 17 (print control) ................................................................................................ ................. 44 Address code 18 (print control for guest receipt and slip) ..................................................................... ... 45 Address code 19 (order control) .. ...

  • Casio TE-2400 - page 5

    TE-2200/2400 Dealer's Manual 5 Programming item/ke y descriptor s .......................................................................... 114 Programming procedure .......................................................................................................... ...... 1 1 4 Programming data ......................................... ...

  • Casio TE-2400 - page 6

    6 Introduction & Contents Clerk detail link .............................................................................................................. ................ 134 Receipt message ................................................................................................................ ........... 134 Check endorsement ....... ...

  • Casio TE-2400 - page 7

    TE-2200/2400 Dealer's Manual 7 Report sample .................................................................................................................. ............. 160 Financial report ............................................................................................................... ............... 160 Individual item/ke ...

  • Casio TE-2400 - page 8

    8 Introduction & Contents Appendix: P eripheral de vice configuration ................................................... 191 UP-360 ......................................................................................................................... 191 SP-1300 ............................................................................... ...

  • Casio TE-2400 - page 9

    TE-2200/2400 Dealer's Manual 9 Report header file ...................................................................................................... 202 Report header .................................................................................................................. .............. 202 T ax table file ........................ ...

  • Casio TE-2400 - page 10

    10 Introduction & Contents ...

  • Casio TE-2400 - page 11

    11 System configuration TE-2200/2400 Dealer's Manual System configuration Hardware configuration General configuration 1 Operator display 2 Customer display (Popup display) 3 Stroke ke yboard (TE-2200) 4 T ouch ke yboard (TE-2400) 5 CF card slot cover 6 Printer cover 7 Mode switch 8 Connector cov er (opposite side) 1 2 3 5 6 7 8 1 2 4 5 6 7 8 ...

  • Casio TE-2400 - page 12

    12 System configuration Ke yboard Po w e r supply P opup disp . i/f Dra wer Scanner HHS-15 Draw er 1 i/f Draw er 2 i/f RS- 232C COM1 RS- 232C COM2 Dra wer Slip printer SP-1300 MODEM or PC CPU RAM Flash Memor y Main Displa y Note: Shadowed device and dot line indicate option devices. PR T -CB-8A/-8B PR T -CB-8C PRL-CB-2 Po w e r supply Exter nal pri ...

  • Casio TE-2400 - page 13

    13 System configuration TE-2200/2400 Dealer's Manual Input/output connectors Input /output connectors COM ports are located in the leftside connector cover . SCANNER PC/MODEM COM2 COM1 Display Contrast control (Except f or U .S. model) HELP CONTRAST LIGHT D ARK DA TE/ TIME RECEIPT ON/OFF ...

  • Casio TE-2400 - page 14

    14 System configuration Steps to define COM port/peripheral devices After connecting peripheral devices, programming of I/O parameter ta ble, printer connection table are necessary . Online configuration Peripheral ports and their connectable devices Av ailable device/cab le list External printer: UP-360 Printer cable: PR T -CB-8A(3m) or PR T -CB-8 ...

  • Casio TE-2400 - page 15

    15 IPL TE-2200/2400 Dealer's Manual IPL (Initial pr ogram loading) IPL should be made before initializing when the application program has been modif ied. Memory map of the terminal The application programs are do wnloaded from PC (via COM port)/other terminal (via inline or COM port)/CF card to the internal flash memory . System configuration ...

  • Casio TE-2400 - page 16

    16 IPL (Initial Pr ogram Loading) CF card Ne ver plug/unplug the CF card during IPL. Via CF car d (to send the IPL data to CF car d) Operation 1. Set the mode switch to OFF position. 2. Open the CF card slot cover and inser t the CF card securely . (Please check that the CF card is vacant. Refer to the “System utility section in PGM7”.) 3. T ur ...

  • Casio TE-2400 - page 17

    17 Initialization TE-2200/2400 Dealer's Manual Initialization Machine initialization pr ocedure 1. Plug the power cord into an A C outlet. 2. Hold down <JOURN AL FEED>. 3. T urn the mode switch to PGM position. 4. Release <JOURN AL FEED>. Y ou should see “0000000000” on the display . If 10 zeros are not shown or another charact ...

  • Casio TE-2400 - page 18

    18 Initialization Note: Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machine number is printed properly . If error codes are printed on it, check the hardwar e and retry the operation. W orksheet (Initialize) * When you select this option “Use clerk secret code k ey”, ...

  • Casio TE-2400 - page 19

    19 Initialization TE-2200/2400 Dealer's Manual Flag c lear operation 1. Plug the power cord into an A C outlet. 2. Hold down <RECEIPT FEED>. 3. T urn the mode switch to PGM position. 4. Release <RECEIPT FEED>. Y ou should see “FFFFFFFFFF” on the display . If 10 Fs are not shown or another character are shown, immediately set th ...

  • Casio TE-2400 - page 20

    20 Initialization Entering dia g mode P assw ord During initialize operation, you can program the password for PGM 3 ~ 7. If it is set, e v ery time you enter PGM 3 ~ 7 mode, you must input this password by the follo wing procedure. 1. Press <#-1> (normally <CASH/AMT TEND>). 2. Enter password. 3. Press <#-2> (normally <SUBTO T ...

  • Casio TE-2400 - page 21

    21 Programming TE-2200/2400 Dealer's Manual Programming (General explanation) Program sub mode (P1 thru P7 mode) Program mode contains sev en sub modes listed belo w . When you change the mode switch to PGM mode, the re gister is always in the PGM 1 mode. In case of using other mode, enter the sub mode n umber (2 ~ 7) and press <SUBTO T AL& ...

  • Casio TE-2400 - page 22

    22 Pr ogramming (General explanation) ...

  • Casio TE-2400 - page 23

    23 Program 5 TE-2200/2400 Dealer's Manual File allocation (Program 5) File allocation program Programming procedure File attribu- Consolidation file tion code daily sales Periodic 1 Periodic 2 Daily sales Periodic 1 Periodic 2 0 ✔ 1 ✔✔ 2 ✔✔ ✔ 3 ✔✔ 4 ✔✔ ✔ ✔ 5 ✔✔ ✔ ✔ ✔✔ 6 5 s 6 :: : s 6 :: a 6 s File record nu ...

  • Casio TE-2400 - page 24

    24 File allocation pr ogramming (P5) File number list File Record Max No. Attribu- Allocat- Default File description Description No. length of records tion able Rec. No. System files 088 Auto-program work 6 1 W ork No 1 089 Consecutive n umber wor k 6 1 W ork No 1 091 T erminal connection table 12 1 Program Y es 32 093 Printer connection table 5 7 ...

  • Casio TE-2400 - page 25

    25 Program 5 TE-2200/2400 Dealer's Manual File Record Max No. Attribu- Allocat- Default File description Description No. length of records tion able Rec. No. 010 Monthly sales 20 31 Pgm/Sale Y es 31 --- (periodic total 1) 20 31 Sales Y es 0 --- (periodic total 2) 20 31 Sales Y es 0 --- (daily consolidation) 20 31 Sales Y es 0 --- (periodic 1 c ...

  • Casio TE-2400 - page 26

    26 File allocation pr ogramming (P5) File Record Max No. Attribu- Allocat- Default File description Description No. length of records tion able Rec. No. Program / message / b uffer files 022 General control 5 37 Program No 37 023 Special character 16 42 Program No 42 024 Report header 12 25 Program No 26 025 T ax table 74 10 Program Y es 4 028 Set ...

  • Casio TE-2400 - page 27

    27 Program 5 TE-2200/2400 Dealer's Manual Issuing program reading report of program 5 mode Issuing procedure Report sample P 05 .................... FILE0001 22bytes 99 99 99 10bytes 99 99 99 FILE0002 35bytes 100 -- -- 10bytes 100 -- -- RAM 20,234 — Program read symbol — File name — Sales file record length/No. of records of daily sales/ ...

  • Casio TE-2400 - page 28

    28 File allocation pr ogramming (P5) ...

  • Casio TE-2400 - page 29

    29 Program 4 TE-2200/2400 Dealer's Manual Key allocation (Program 4) Key allocation program Programming procedure By pressing the appropriate key By entering physical key code Menu sheet number Menu sheet Description Description number (f or transaction key) (f or Dept/flat-PLU) 0 or skip entering Set a function to the 1st ~ 6th menu sheets. S ...

  • Casio TE-2400 - page 30

    30 Key allocation pr ogramming (P4) Configuration of the ph ysical ke y la y out TE-2200 TE-2400 for Eu TE-2400 for US T he shado wed ke y cannot be programmed with any other functions. <00>, <000>, and <.> functions are only allocated to <#011> or <#012> ke ys. 071 064 062 060 054 048 042 036 030 024 018 081 076 070 0 ...

  • Casio TE-2400 - page 31

    31 Program 4 TE-2200/2400 Dealer's Manual Function code list Function Code Initial character Add check Arrangement Birth date Bill copy Bottle return Cancel Cash amount tendered Char ge Check endorsement Check print Check tender Clerk number Clock-in/out Coupon Coupon 2 Credit Cube Currency e xchange Customer number Date/T ime Decimal point De ...

  • Casio TE-2400 - page 32

    32 Key allocation pr ogramming (P4) Issuing pr ogram reading report of program 4 mode Issuing pr ocedure Report sample P 04 .................... 1 ----------------------- 00 0015-02 011-096 . 0009-02 012-098 CASH 0004-02 013-001 — Program read symbol — Function character/rec-#/file-# — Hard key code/function code 6 4 s 6 s PGM Mode switch ...

  • Casio TE-2400 - page 33

    33 Program 3 TE-2200/2400 Dealer's Manual Ke y function/mac hine feature (Pr ogram 3) General contr ol pr ogram Programming pr ocedure Program data (b y address code) Address code 01 (date order/pass wor d) Address code 02 (passw or d) Address code 03 (consecutive number) Description Choice Program code Initial value Date order Y ear/Month/Day ...

  • Casio TE-2400 - page 34

    34 Key function/machine featur e (P3) Address code 04 (tax system, r ounding, etc.) Rounding Description Choice Program code Initial value Apply rounding for registration. No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4, Singaporean = 5, Finnish = 6, Australian = 7, South Africa = 8 T ax system Single tax system (1 ~ 10) = 0, U.S. tax ...

  • Casio TE-2400 - page 35

    35 Program 3 TE-2200/2400 Dealer's Manual Address code 05 (print contr ol for receipt) Description Choice Program code Initial value Print total line during finalization. T ime system: 1 24 hour system, 2 12 hour system Feed one line after issuing receipt. Print consecutive number by double sized letter (up to 3 digits). Buffered receipt pr in ...

  • Casio TE-2400 - page 36

    36 Key function/machine featur e (P3) Address code 06 (calculation & operation contr ol) Description Choice Program code Initial value Follow the taxable status and commission status of previous item when +/- operation is performed. Force to register rate tax before finalization. Force a money declaration by b , n , N before read/reset operatio ...

  • Casio TE-2400 - page 37

    37 Program 3 TE-2200/2400 Dealer's Manual Address code 07 (menu & price shift) Description Choice Program code Initial value Maintenance of last menu shift: 1 Do not maintain 2 Until next menu shift specification 3 W ithin this transaction Maintenance of last price shift: 1 Do not maintain 2 Until next price shift specification 3 W ithin t ...

  • Casio TE-2400 - page 38

    38 Key function/machine featur e (P3) Address code 08 (print contr ol for fix ed total report) Description Choice Program code Initial value Print gross sales total on fix ed total report ( GROSS ) Print net sales total on fixed total repor t ( NET ) Print cash in drawer total on fix ed total report ( CAID ) Print difference between mone y declarat ...

  • Casio TE-2400 - page 39

    39 Program 3 TE-2200/2400 Dealer's Manual Address code 09 (print contr ol for fix ed total report) Description Choice Program code Initial value Print taxable amount 1 total on fix ed total report ( TA1 ) Print tax 1 total on fixed total re port ( TX1 ) Print tax ex empt 1 total on fix ed total report ( EX1 ) Print taxable amount 2 total on fi ...

  • Casio TE-2400 - page 40

    40 Key function/machine featur e (P3) Address code 13 (online contr ol) Address code 10 (print contr ol for taxab le amount, till timer) Description Choice Program code Initial value Issue reset report at satellites during Z consolidation. * (for in/online master/satellite) Add daily total data to consolidation file when reset operation has been pe ...

  • Casio TE-2400 - page 41

    41 Program 3 TE-2200/2400 Dealer's Manual Address code 14 (currency e xchange contr ol) Description Choice Program code Initial value Monetary mode of CECA1 and CECK1 in fix ed total report: Decimal for CECA1 and CECK1 in fix ed total report: 1 Period = 0, 2 Comma = 1 Separator for CECA1 and CECK1 in fix ed total report: 1 Comma = 0, 2 Period ...

  • Casio TE-2400 - page 42

    42 Key function/machine featur e (P3) Address code 15 (print contr ol for reports) Description Choice Program code Initial value Zero skip department report. Zero skip clerk report. Zero skip transaction report. Zero skip PLU report. Zero skip hourly report. Zero skip group report. Zero skip monthly report. Zero skip table analysis report. Skip a n ...

  • Casio TE-2400 - page 43

    43 Program 3 TE-2200/2400 Dealer's Manual Address code 16 (print contr ol for grand total) Description Choice Program code Initial value Contents of the periodic 1 total: • Normal registration only = 0 • T raining r egistration only = 1 • Both normal registration and training registration = 2 Contents of the periodic 2 total: • Normal ...

  • Casio TE-2400 - page 44

    44 Key function/machine featur e (P3) Address code 17 (print contr ol) Description Choice Program code Initial value Money declaration compulsory (cash) in REG/RF mode Money declaration compulsory (charge) in REG/RF mode Money declaration compulsory (check) in REG/RF mode Money declaration compulsory (credit) in REG/RF mode Always “0” Commissio ...

  • Casio TE-2400 - page 45

    45 Program 3 TE-2200/2400 Dealer's Manual Address code 18 (print contr ol for guest receipt and slip) Description Choice Program code Initial value Maximum printing lines of slip (00 ~ 99) Slip printing speed: “Maximum printing lines of slip” is necessary , if you select “High”. Classify registered item by group on slip & guest rec ...

  • Casio TE-2400 - page 46

    46 Key function/machine featur e (P3) Address code 21 (message contr ol) Description Choice Program code Initial value Print graphic type logo. (If select “No”, character type logo is printed.) Print watermark on receipt. Print commercial message on slip/guest receipt. Print bottom message on slip/guest receipt. Print intermediate message on sl ...

  • Casio TE-2400 - page 47

    47 Program 3 TE-2200/2400 Dealer's Manual Address code 25 (condiment etc.) Address code 26 (chec k trac king) Description Choice Program code Initial value Check tracking method: 1 Check No., 2 Ta b le No. Maximum digit of check number: 1 6-digit, 2 12-digit (If you use “table analysis” or “table range”, select 1 .) T ax calculation by ...

  • Casio TE-2400 - page 48

    48 Key function/machine featur e (P3) Address code 29 (Euro) Address code 28 (Eur o) Description Choice Program code Initial value Define Euro as the main currency . Select rounding option: Round off = 0, Cut of f = 1, Round up = 2 Exchange rate (within 6-digits) Decimal point position of exchange rate: Integer only = 0 1st decimal place = 1, 2nd d ...

  • Casio TE-2400 - page 49

    49 Program 3 TE-2200/2400 Dealer's Manual Address code 31 (scanning) Address code 32 (direct maintenance PLU) Description Choice Program code Initial value Journal compressed print (print by half height characters) Always “000” : D 4 ;;; D 3 D 2 D 1 No = 0 Y es = 1 ; D 4 ;;; D 3 D 2 D 1 Description Choice Program code Initial value Skip th ...

  • Casio TE-2400 - page 50

    50 Key function/machine featur e (P3) Address code 33 (batch PLU maintenance) Description Choice Program code Initial value Skip the record No. designation of batch maintenance PLU file. Skip the optimum stock field programming of batch maintenance PLU f ile. Skip the unit price field programming of batch maintenance PLU f ile. Skip the link field ...

  • Casio TE-2400 - page 51

    51 Program 3 TE-2200/2400 Dealer's Manual Address code 37 (chec k number) Description Choice Program code Initial value Auto check starting number (0000 = 0001) * Auto check ending number (0000 = 9999) * * The starting number should be smaller than the ending number . * If the starting number is bigger than the ending number , the E056 is occu ...

  • Casio TE-2400 - page 52

    52 Key function/machine featur e (P3) Department key/flat-PLU key/PLU pr ogram (Batch feature pr ogramming) Programming procedure Department/flat-PLU key PLU Program data To another department/flat-PLU key Description Choice Program code Initial value Single item control: Normal receipt = 0, Single item receipt = 3 Price change registration is enab ...

  • Casio TE-2400 - page 53

    53 Program 3 TE-2200/2400 Dealer's Manual T axab le status for the U.S./Singapore Food stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status Non tax = 0 T axable 3 = 3 T axable 1 & 3 = 6 T axable 1 = 1 T axable 4 = 4 T axable 1 & 4 = 7 T axable 2 = 2 T axable 1 & 2 = 5 ...

  • Casio TE-2400 - page 54

    54 Key function/machine featur e (P3) Department key/flat-PLU key/PLU pr ogram (Individual feature pr ogramming) Pr ogramming pr ocedure Department/flat-PLU key PLU Pr ogram data (b y address code) Address code 11 (link) Range (Depar tment/PLU/flat-PLU) Description Choice Program code Link group record number: (00 ~ 99) Link department record numbe ...

  • Casio TE-2400 - page 55

    55 Program 3 TE-2200/2400 Dealer's Manual Address code 14 (stoc k) Address code 15 (high amount limit) Address code 13 (set menu) Address code 12 (random code) Description Choice Program code PLU random code (only for PLU) :::::: D 6 D 5 D 4 D 3 D 2 D 1 Significant numbers Description Choice Program code Set menu table/bottle link table record ...

  • Casio TE-2400 - page 56

    56 Key function/machine featur e (P3) Other address code Address code Description Choice Program code Single item control: Normal receipt = 0, Single item receipt = 3 Price change registration is enable. (Only effecti v e for scanning PLU linked to this department) Multiplication re gistration is enable. (Only effecti v e for scanning PLU linked to ...

  • Casio TE-2400 - page 57

    57 Program 3 TE-2200/2400 Dealer's Manual T ransaction ke y pr ogram Programming pr ocedure Program data <CASH>, <CHARGE>, <CHECK> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. (Only effecti v e for <CHARGE> or <CHECK>) Allo wable number of validation pr inting (“0” m ...

  • Casio TE-2400 - page 58

    58 Key function/machine featur e (P3) <CREDIT> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. Allow able number of validation printing (“0” means no limitation) *1 For ce v alidation operation. *1 Disable operation in RF/REG– mode. *1 Disable operation in REG2 mode. *1 Disable operation in REG1 ...

  • Casio TE-2400 - page 59

    59 Program 3 TE-2200/2400 Dealer's Manual <FOOD ST AMP TENDER>, <EBT> <NEW BALANCE> Description Choice Program code Allow able number of validation printing (“0” means no limitation) For ce v alidation operation. Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. For ce ba ...

  • Casio TE-2400 - page 60

    60 Key function/machine featur e (P3) <CHARA CTER RECALL>, <CHARACTER PRINT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Disable to change mode switch after registration. (only effecti ve for <character recall>) Print characters ...

  • Casio TE-2400 - page 61

    61 Program 3 TE-2200/2400 Dealer's Manual <LOAN>, <PICK UP> <RECEIVED ON A CCOUNT>, <P AID OUT> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. Allow able number of validation printing (“0” means no limitation) For ce v alidation operation. (only effecti ve after receipt issu ...

  • Casio TE-2400 - page 62

    62 Key function/machine featur e (P3) <+ (PLUS)>, <- (MINUS)>, <COUPON> T axab le status for the U.S./Singapore Food stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.) Non tax = 0 T axable 3 = 3 T axable 1 & 3 = ...

  • Casio TE-2400 - page 63

    63 Program 3 TE-2200/2400 Dealer's Manual <DEPOSIT> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. Always “0” For ce v alidation operation. (only effecti ve after receipt issuance) Multiple validation (If “No, ” only one valida tion is possible.) Disable operation in RF/REG– mode. Disab ...

  • Casio TE-2400 - page 64

    64 Key function/machine featur e (P3) <PREVIOUS BALANCE> T axab le status for the U.S./Singapore Food stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.) Non tax = 0 T axable 3 = 3 T axable 1 & 3 = 6 T axable 1 = 1 T axable ...

  • Casio TE-2400 - page 65

    65 Program 3 TE-2200/2400 Dealer's Manual <PREMIUM (%+)>, <DISCOUNT (%-)> T axab le status for the U.S./Singapore F ood stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.) Non tax = 0 T axable 3 = 3 T axable 1 & 3 ...

  • Casio TE-2400 - page 66

    66 Key function/machine featur e (P3) <RA TE T AX> <MANU AL T AX> <ERROR CORRECTION/CANCEL> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “00” Prohibit manual entry . Rounding: Round off = 0, cut of f = 1, round up = 2 Always “0000? ...

  • Casio TE-2400 - page 67

    67 Program 3 TE-2200/2400 Dealer's Manual <VOID> <RECEIPT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0000000” A range of item correction: 1 Fr om the beginning of this transaction 2 Current receipt only Affect stock quantity a b c ...

  • Casio TE-2400 - page 68

    68 Key function/machine featur e (P3) <CHECK ENDORSEMENT> <NON ADD (#)>, <NON ADD (#)/NO SALE> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Line number of auto-back feed before printing (0 ~ 9) Always “000000” a b c : (a+b+c) ...

  • Casio TE-2400 - page 69

    69 Program 3 TE-2200/2400 Dealer's Manual <CUST OMER> <ARRANGEMENT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Input method: Allo w replacement = 0, Prohibit replacement = 1, Add enter value = 2 Always “000000” a b c : (a+b+ ...

  • Casio TE-2400 - page 70

    70 Key function/machine featur e (P3) <CURRENCY EXCHANGE> <BILL> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Define amount symbol. (0, 1 ~ 4) (“0” means local currency symbol.) Define foreign currency totaliz er . (0, 1 ~ 4) (“0 ...

  • Casio TE-2400 - page 71

    71 Program 3 TE-2200/2400 Dealer's Manual <SLIP> <T AX SHIFT>, <T AXABLE SUBT O T AL> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” For ce slip batch printing from the be ginning of the transaction. If “No”, controlled by ...

  • Casio TE-2400 - page 72

    72 Key function/machine featur e (P3) <EXEMPT> <MENU> <OPEN> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. • U.S., Singapore: Exempt tax 1 Exempt tax 2 Exempt tax 3 • Canada: Not exempt donuts tax = 0 Exempt donuts tax 1 = 1 Exempt all (tax ...

  • Casio TE-2400 - page 73

    73 Program 3 TE-2200/2400 Dealer's Manual <OPEN2> <PRICE SHIFT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Release customer number compulsory . Release table number compulsory . Release check number compulsory . Release credit b ...

  • Casio TE-2400 - page 74

    74 Key function/machine featur e (P3) <REVIEW> <CLERK NUMBER> <OPERA T OR X/Z> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. T he re viewed range of item: 1 From the beginning of this transaction 2 Current receipt only Display “Check number” ...

  • Casio TE-2400 - page 75

    75 Program 3 TE-2200/2400 Dealer's Manual <TRA Y T O T AL> <SUBT O T AL>, <MERCHANDISE SUBT O T AL> Description Choice Program code Allow able number of validation printing (“0” means no limitation) For ce v alidation operation Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 ...

  • Casio TE-2400 - page 76

    76 Key function/machine featur e (P3) <NEW CHECK>, <NEW/OLD CHECK> <MUL TIPLICA TION>, <QU ANTITY/FOR>, <SQU ARE>, <CUBE> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “00” Multiplication procedure: (<KETTEN BON&g ...

  • Casio TE-2400 - page 77

    77 Program 3 TE-2200/2400 Dealer's Manual <PRICE CHANGE> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “00000” High digit limitation (HDL) for manually entered unit price (“9” means NO T allo w manual entry .) Always “0” Prohibit to ...

  • Casio TE-2400 - page 78

    78 Key function/machine featur e (P3) <EA T -IN>, <T AKEOUT> <ONE T OUCH NLU> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. • U.S., Singapore: Exempt tax 1 Exempt tax 2 Exempt tax 3 • Canada: Not ex empt donuts tax = 0 Exempt donuts tax 1 = ...

  • Casio TE-2400 - page 79

    79 Program 3 TE-2200/2400 Dealer's Manual <CANCEL> <V ALID A TION> <PRICE INQUIR Y>, <ST OCK INQUIR Y>, <CHECK PRINT>, <REFUND>, <COUPON2>, <NO SALE>, <V A T>, <PLU>, <PRICE>, <BO TTLE RETURN>, <SLIP B A CKFEED/RELEASE>, <SLIP FEED/RELEASE>, <T ABLE NUMBER&g ...

  • Casio TE-2400 - page 80

    80 Key function/machine featur e (P3) Clerk program Secret number , drawer , chec k number programming Programming procedure Data Clerk detail link pr ogramming Programming pr ocedure Description Choice Program code Check number for clerk interrupt Assigning drawer n umber: 00 ~ 02 ("00" means drawer 1.) Clerk secret number :::::: D 12 D ...

  • Casio TE-2400 - page 81

    81 Program 3 TE-2200/2400 Dealer's Manual Clerk other pr ogramming Programming procedure (individual) Program data Address code 67 (Clerk control) Programming procedure (by range) Description Choice Program code Check number compulsory Ta b le number compulsory Number of customer compulsory Guest receipt compulsory (at finalization) Guest rece ...

  • Casio TE-2400 - page 82

    82 Key function/machine featur e (P3) Address code 68 (Commission rate) Address code 69 (T able number range) Address code 70 (Mode control) Description Choice Program code Commission rate 1 (integer: 00 ~ 99) Commission rate 1 (decimal: 00 ~ 99) Commission rate 2 (integer: 00 ~ 99) Commission rate 2 (decimal: 00 ~ 99) :: D 8 D 7 :: D 6 D 5 :: D 4 ...

  • Casio TE-2400 - page 83

    83 Pr ogram 3 TE-2200/2400 Dealer's Manual Other pr ograms Time range programming Programming pr ocedure Program data Ta b le range programming Programming pr ocedure Program data Description Choice Program code Start time (hour: 00 ~ 23) Start time (minute: 00 ~ 59) End time (hour: 00 ~ 23) End time (minute: 00 ~ 59) :: D 8 D 7 :: D 6 D 5 :: ...

  • Casio TE-2400 - page 84

    84 Key function/machine featur e (P3) T ax table pr ogramming Programming pr ocedure 8 3 s 8 :::: s 8 :: ^ :::: a 8 :::: a 8 :::: a 8 :::: a 8 :::: a 8 :::: a 8 :::: a 8 s (for the U.S., Singapore) T ax table 1 = 0125 T ax table 2 = 0225 T ax table 3 = 0325 (for Canada) T ax table 1 = 0125 T ax table 2 = 0225 T ax table 3 = 0325 T ax table 4 = 0425 ...

  • Casio TE-2400 - page 85

    85 Pr ogram 3 TE-2200/2400 Dealer's Manual Example 1: Add-on rate tax 3 s 8 :::: s 8 8^25 a 8 0 a 8 5002 a 8 s T ax rate (2-digit for inte ger + 4-digit for decimal) ............................... 8.25% T ax table maximum v alue ("0" means unlimited). ............................... 0 (no limitation) Rounding/tax table system code . ...

  • Casio TE-2400 - page 86

    86 Key function/machine featur e (P3) Example 2: U. S. tax tab le without rate setting TA X Price range (6%) Min. break point Max. break point $ .00 $ .01 $ .10 .01 .11 .24 .02 .25 .41 .03 .42 .58 .04 .59 .74 .05 .75 .91 .06 .92 1.08 .07 1.09 1.24 .08 1.25 1.41 Max. break point Upper Lo wer Difference P attern 10 – 0 = 10 24 – 10 = 14 Non cycli ...

  • Casio TE-2400 - page 87

    87 Pr ogram 3 TE-2200/2400 Dealer's Manual Example 3: U. S. tax table with rate setting TA X Price range (7%) Min. break point Max. break point $ .00 $ .01 $ .07 .01 .08 .21 .02 .22 .35 .03 .36 .49 .04 .50 .64 .05 .65 .78 .06 .79 .92 .07 .93 1.07 .08 1.08 1.21 .09 1.22 1.35 .10 1.36 1.49 .11 1.50 1.64 .12 1.65 1.78 .13 1.79 1.92 .14 1.93 2.07 ...

  • Casio TE-2400 - page 88

    88 Key function/machine featur e (P3) Example 4: Add-in rate tax Example 5: Singapore tax T ax rate (2-digit for integer + 4-digit for decimal) ............................... 10.00 % Rounding/tax table system code. .......................................................... 0003 (Cut of f) 3 s 8 :::: s 8 10 a 8 0 a 8 0003 a 8 s T ax table No. (0125 ...

  • Casio TE-2400 - page 89

    89 Pr ogram 3 TE-2200/2400 Dealer's Manual Set menu pr ogramming Programming pr ocedure Batch X/Z report programming Programming pr ocedure Program data Contr ol flag (1st field) Report code (2nd ~ 11th field) Description Choice Program code Report code: Fixed totalizer = 11, T ransaction key = 12, PLU = 14, PLU by group = 24, Department = 15, ...

  • Casio TE-2400 - page 90

    90 Key function/machine featur e (P3) Chec k print control pr ogramming Programming pr ocedure Program data Arrangement pr ogramming Programming pr ocedure Description Choice Program code Define printing data: 1: Printing amount, 2: Printing amount (double size), 3: Printing date, 4: Printing date (double size) 5: Check endorsement message 1st line ...

  • Casio TE-2400 - page 91

    91 Pr ogram 3 TE-2200/2400 Dealer's Manual Mix & match pr ogramming Programming pr ocedure Program data T axab le status for the U.S./Singapore F ood stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.) Non tax = 0 T axable 3 ...

  • Casio TE-2400 - page 92

    92 Key function/machine featur e (P3) Emplo yee number pr ogramming Programming pr ocedure Description Choice Program code Employee number (0000000001 ~ 9999999999) :: ~ :: D 10 D 9 D 2 D 1 Significant numbers 6 3 s 6 :: 61 s 6 :: 6 a 6 s To a ne w (not sequential) record Record No. PGM Mode switch Program data To the next record ~ Program data ...

  • Casio TE-2400 - page 93

    93 Pr ogram 3 TE-2200/2400 Dealer's Manual Scheduler pr ogramming Programming pr ocedure Program data 1 Program data 2 Program data 3 Description Choice Program code • Execute kind: Switc h menu shift/price shift Switch to: 1st menu sheet = 1, 2nd menu sheet = 2, 3rd menu sheet = 3, 4th menu sheet = 4, 5th menu sheet = 5, 6th menu sheet = 6, ...

  • Casio TE-2400 - page 94

    94 Key function/machine featur e (P3) Job command table Description J ob No. Group/terminal ID Parameter Default menu sheet number after signing on. (D 3 of address code 70 of clerk programming) Disabled menu sheet number (D 2 D 1 of address code 70 of clerk programming) Switching to dual (Euro/local) currency system to Euro only system Batch maint ...

  • Casio TE-2400 - page 95

    95 Pr ogram 3 TE-2200/2400 Dealer's Manual Bottle link table pr ogramming Programming pr ocedure 6 3 s 6 :: 73 s 6 66 B 6 B 6 a 6 s 6 + 6 6 :::: 04 a 6 PLU No. To a new (not sequential) total Record No. PGM Mode switch To the next record Record No. (4-digits) Random code (6-digits) MENU Flat- PLU ...

  • Casio TE-2400 - page 96

    96 Key function/machine featur e (P3) I/O parameter table pr ogramming Programming pr ocedure Program data (Address 01: for COM 1 port) Program data (Address 02: for COM 2 port) Description Choice Program code International character set number for external printer: 00: U.S.A., 01: France, 02: German, 03: U.K., 04: Denmark(1), 05: Sweden, 06: Italy ...

  • Casio TE-2400 - page 97

    97 Pr ogram 3 TE-2200/2400 Dealer's Manual Reference (Baud rate/de vice table) Printer connection table pr ogramming Programming pr ocedure Program data Device Default baud rate Other selection Scanner (HHS-15) 2400bps (D 2 = 0) 9600bps (D 2 = 2) 4800bps (D 2 = 3) Scanner (Quick Scan 6000) 9600bps (D 2 = 0) 4800bps (D 2 = 3) 2400bps (D 2 = 4) ...

  • Casio TE-2400 - page 98

    98 Key function/machine featur e (P3) Non PLU tab le pr ogramming Programming pr ocedure Program data Program sample Description Choice Program code Non PLU type: Short version = 0, Long v ersion = 1 Price check digit is included in the price field. Price × 10 n Number of digits for price Always “0000000” Number of digits for scanning PLU sear ...

  • Casio TE-2400 - page 99

    99 Pr ogram 3 TE-2200/2400 Dealer's Manual 6 3 s 6 4070 s 6 a s PGM Mode switch Activ ation Cancellation Proceeds the ne xt v acant r ecord. 6 3 s 6 0070 s 6 :: 6 a 6 6 : 6 a 6 B 66 6 :: 6 a 6 66 6 :: 6 a 6 :: 6 a 6 6 :: 6 a 6 :: 6 a 6 :: 6 a 6 s B B B a Record No. (001 ~ 999) PGM Mode switch Unit price/quantity *1 Action code *1 Add/ Modify D ...

  • Casio TE-2400 - page 100

    100 Key function/machine featur e (P3) Scanning PLU direct maintenance pr ogramming Programming pr ocedure 6 3 s 6 0071 s 6 6 : 6 a 6 B 66 6 :: 6 a 6 66 6 :: 6 a 6 :: 6 a 6 6 :: 6 a 6 :: 6 a 6 :: 6 a 6 s B B B a PGM Mode switch Unit price/quantity Action code *1 Character *1 *1 Status *1 *1 *1 Bottle link Mix & match Code Scanning Link-# ~ ~ ~ ...

  • Casio TE-2400 - page 101

    101 Pr ogram 3 TE-2200/2400 Dealer's Manual Scanning PLU individual pr ogramming Programming pr ocedure 6 3 s 6 0171 s 6 6 :: 66 6 s 6 B 66 6 6 :: 6 a 6 s 66 6 s 6 :: 6 a 6 s B B B a 0170 B Address code PRICE SHIFT Code Scanning } { OBR NLU B B B Character Link-# } { DEPT Program data Address code 22: character programming Address code 11: lin ...

  • Casio TE-2400 - page 102

    102 Key function/machine featur e (P3) Description Choice Program code Bottle link record No. (0000 ~ 9999) :::: D 4 D 3 D 2 D 1 Significant numbers Description Choice Program code Link mix & match record No. (00 ~ 99) :: D 2 D 1 Significant numbers Description Choice Program code Unit quantity (0.01 ~ 9999.99) Unit price (000000 ~ 999999) :::: ...

  • Casio TE-2400 - page 103

    103 Pr ogram 3 TE-2200/2400 Dealer's Manual One touch NLU pr ogramming Programming pr ocedure 6 3 s 6 :: 77 s 66 B 6 s B PGM Mode switch Rec No. (up to 3 digits) To the next record Code Scanning ~ OBR } { NLU for the U.S./Singapore F ood stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Don ...

  • Casio TE-2400 - page 104

    104 Key function/machine featur e (P3) Issuing pr ogram reading report of program 3 mode Issuing pr ocedure Report sample — Program read symbol —T ransaction key program —K ey character/rec-#/file-# —K e y p r ogram Department program —K ey character/rec-#/file-# —K e y p r ogram — Batch program 1166 — Batch program 1566 — Batch p ...

  • Casio TE-2400 - page 105

    105 Program 2 TE-2200/2400 Dealer's Manual Character (Program 2) Pr ogramming descriptors Programming pr ocedure Programming data Fixed totalizer (up to 12 characters) 6 2 s 6 :: : : s 66 a 6 s PGM Mode switch Address code To other address code Rec No. File No. To the next address code Character ☞ See “Entering characters” section. ~ GRO ...

  • Casio TE-2400 - page 106

    106 Character pr ogramming (P2) Group c haracter Up to 12 characters Address Contents Initial character code 0106 Group 01 0206 Group 02 0306 Group 03 :: 9906 Group 99 GROUP01 GROUP02 GROUP03 : GROUP99 Address Contents Initial character code 0118 T a ble 0 1 0218 T a ble 02 0318 T a ble 03 :: 9918 T a ble 99 TBL01 TBL02 TBL03 : TBL99 Address Conten ...

  • Casio TE-2400 - page 107

    107 Program 2 TE-2200/2400 Dealer's Manual Address Contents Initial character code main currency symbol (2), @ (2), No. (2), split pricing (2), not used (1) 0123 training filler (1), training symbol (1), not used (1), sub currency symbol (2) No. of item sold (2), No. of customer (2), scalable item @ (2), 0223 scale weight (2), new price (2), m ...

  • Casio TE-2400 - page 108

    108 Character pr ogramming (P2) Address Contents Initial character code 5023 element title 8 of CF X/Z report (16) 5123 element title 9 of CF X/Z report (16) 5223 element title 10 of CF X/Z report (16) 5323 element title 11 of CF X/Z report (16) 5423 element title 12 of CF X/Z report (16) 5523 element title 13 of CF X/Z report (16) 5623 element tit ...

  • Casio TE-2400 - page 109

    109 Program 2 TE-2200/2400 Dealer's Manual Message Up to 24 characters Address Contents Initial character Y ours code 0132 1st line of logo message 0232 2nd line of logo message 0332 3rd line of logo message 0432 4th line of logo message 0532 1st line of commercial message 0632 2nd line of commercial message 0732 3rd line of commercial message ...

  • Casio TE-2400 - page 110

    110 Character pr ogramming (P2) Report header Up to 12 characters Batch X/Z header Up to 12 characters Check endorsement message Up to 40 characters Address Contents Initial character code 0124 Fixed totalizer report 0224 Transaction ke y report 0324 PLU report 0424 Department report 0524 Group report 0624 Cashier/clerk report 0724 Not used 0824 Ho ...

  • Casio TE-2400 - page 111

    111 Program 2 TE-2200/2400 Dealer's Manual Slip/external printer message Up to 40 characters (Contents are the same as file032.) Recall character messa g e Up to 40 characters Mix & match character Up to 12 characters Employee c haracter Up to 12 characters Address Contents Initial character code 0134 Slip/external printer message 01 0234 ...

  • Casio TE-2400 - page 112

    112 Character pr ogramming (P2) T erminal connection table Up to 8 characters Address Contents Initial character code 0191 Physical No. 01 MC#01 Error messa ge Up to 16 characters Miscellaneous message Up to 16 characters Printing guidance message Up to 24 characters Address Contents Initial character code 0180 Error code 0280 Mode switch position ...

  • Casio TE-2400 - page 113

    113 Program 2 TE-2200/2400 Dealer's Manual Program guidance messa ge Up to 16 characters Registration guidance message Up to 16 characters Address Contents Initial character code 0183 Range program message 1st line 0283 Input start No. message 1st line 0383 Input start No. message 2nd line :: 9783 Range PGM Input start No. and press <#1> ...

  • Casio TE-2400 - page 114

    114 Character pr ogramming (P2) Programming item/key descriptors Programming pr ocedure Depar tment ke y/transaction ke y PLU Flat-PLU key Programming data Depar tment up to 16 characters PLU/flat-PLU up to 16 characters Contents Initial character Department 01 Department 02 Department 03 : Department 99 DEPT01 DEPT02 DEPT03 : DEPT99 PLU No. Conten ...

  • Casio TE-2400 - page 115

    115 Program 2 TE-2200/2400 Dealer's Manual T ransaction ke y Up to 12 characters Function Code Initial character Add check Arrangement Birth date Bill copy Bottle return Cancel Cash amount tendered Charge Check endorsement Check print Check tender Clerk number Clock-in/out Coupon Coupon 2 Credit Cube Currency e xc hange Customer number Date/T ...

  • Casio TE-2400 - page 116

    116 Character pr ogramming (P2) Pr ogramming item/c lerk descriptor s b y range Pr ogramming pr ocedure Pr ogram data Department up to 16 characters PLU/flat-PLU up to 16 characters Contents Initial character Department 01 Department 02 Department 03 :: Department 99 DEPT01 DEPT02 DEPT03 : DEPT99 6 2 s 6 990000 :: s 6 6 :: 6 a 6 :: 6 a 6 :: a 6 s P ...

  • Casio TE-2400 - page 117

    117 Program 2 TE-2200/2400 Dealer's Manual Entering character s By character keyboar d TE-2200 character keyboar d RECEIPT JOURNAL FEED FEED #-2 #-1 C 78 9 45 6 12 3 00 0 • SHIF T INS/ OVR < — DOUBLE SIZE — > ABC DE FG ab c d e f g HI 7 J 8 K 9 L M N hi j k lm n OP 4 Q 5 R 6 S op q r s TU 1 V 2 W 3 X tu vw x YZ 0 yz 7 9 0 1 C 5 A B ...

  • Casio TE-2400 - page 118

    118 Character pr ogramming (P2) 1 Shift key TE-2200: Pressing this ke y shifts the character through the upper- case letter , lo wer case letter and numerics. TE-2400: Pressing this ke y shifts the character from the uppercase letter to lower case letter and vice v ersa. 2 Left cursor key Move the cursor to the left one by one to modify c haracters ...

  • Casio TE-2400 - page 119

    119 Program 2 TE-2200/2400 Dealer's Manual By character code 0@P p !1AQaq "2BRbr #3CScs $4DTdt %5EUeu &6FVfv '7GWgw (8HXhx )9IYiy *:JZjz +;K[k{ ,<Ll| -=M]m} .>N^n~ /?O_o Ç ü é â ä à å ç ê ë è ï î ì Ä Å Éá Ó - æí D ß± Æó ÊÔ_ ôú Ë Ò 3 / 4 öñ Èõ¶ òÑ Á ⁄Õ§ û ªÂã͵ ÷ ù ºÀÃÎ ...

  • Casio TE-2400 - page 120

    120 Character pr ogramming (P2) Editing characters Correcting a character just entered OPERA TION DISPLA Y (c haracter) “L” “E” “N” “O” “N” 1 Enter LENON, instead of LEMON. yyy 1 Press left arrow key three times. B 1 Override mode “M” 1 Enter “M”. Correcting and adding a PLU descriptor alread y set OPERA TION DISPLA Y (c ...

  • Casio TE-2400 - page 121

    121 Program 2 TE-2200/2400 Dealer's Manual Issuing pr ogram reading report of program 2 mode Issuing procedure Report sample P 02 .................... GROSS 0001-01 NET 0002-01 CAID 0003-01 CATL 0004-01 0005-01 CHECK 0001-02 CHARGE2 0002-02 PD 0003-02 0004-02 DEPT01 0001-05 DEPT02 0002-05 DEPT03 0003-05 0004-05 GROUP01 0001-06 GROUP02 0002-06 ...

  • Casio TE-2400 - page 122

    122 Character pr ogramming (P2) ...

  • Casio TE-2400 - page 123

    123 Program 1 TE-2200/2400 Dealer's Manual Unit price/rate (Pr ogram 1) Date/time setting Date setting Time setting Unit price pr ogram Programming pr ocedure Programming the 1st unit price and unit quantity (to department/flat-PLU key) 6 1 s 6 :: :: 66 C B x 6 1 s 6 : :: :: 66 C B x DATE/ TIME DATE/ TIME PGM Mode switch Hour Minute (00 ~ 23) ...

  • Casio TE-2400 - page 124

    124 Unit price/rate pr ogramming (P1) Programming the unit price and unit quantity (to PLU) Program data Description Choice Program code D 12 ~ D 7 for non scalable item (unit quantity/2nd unit quantity) Unit quantity (integer) Unit quantity (decimal) D 12 ~ D 7 for scalable item (unit quantity/2nd unit quantity) Unit quantity (integer) Unit quanti ...

  • Casio TE-2400 - page 125

    125 Program 1 TE-2200/2400 Dealer's Manual Rate program <CURRENCY EXCHANGE> < CHECK>, <NEW BALANCE>, <PREMIUM (%+)>, <DISCOUNT (%–)>, <RA TE T AX> Amount program < CASH>, <CHECK>, <NEW B ALANCE>, <PLUS (+)>, <MINUS (–)>, <COUPON> Scanning PLU direct maintenance program ...

  • Casio TE-2400 - page 126

    126 Unit price/rate pr ogramming (P1) Issuing program reading report of program 1 mode Issuing procedure Report sample 6 1 s 6 s PGM Mode switch P 01 .................... CASH @100.00 CHECK @1.00 - @1.00 %- 10% DEPT01 0001-05 1.2 @1.00 DEPT02 0002-05 1 @2.00 — Program read symbol —T ransaction key unit price or rate — Department descriptor/re ...

  • Casio TE-2400 - page 127

    127 Pr ogram 6 TE-2200/2400 Dealer's Manual Program reading (Program 6) Issuing program reading report Issuing procedure Reading by file Reading by range Report code File name Report code Note Unit price Character Status, etc. Fixed totalizer ----- 201 ----- Tr ansaction key 102 202 302 PLU 104 204 304 By range reading Department 105 205 305 B ...

  • Casio TE-2400 - page 128

    128 Pr ogram r eading (P6) Report sample Fixed totalizer T ransaction key Program 1 Program 2 Program 3 — Program 2 mode symbol —F ixed totalizer descriptor/rec-#/f ile-# P 02 .................... GROSS 0001-01 NET 0002-01 CAID 0003-01 CATL 0004-01 P 01 .................... CHECK @10.00 CASH @1.00 - @2.20 %- 10.24% — Program 1 mode symbol — ...

  • Casio TE-2400 - page 129

    129 Pr ogram 6 TE-2200/2400 Dealer's Manual PLU Program 1 Program 2 Program 3 — Program 1 mode symbol — PLU range — PLU descriptor/rec-#/file-# — PLU random code — Unit quantity/unit price P 01 .................... #000001 - #000010 PLU0001 0001-04 #000001 1.23 @10.00 PLU0002 0002-04 #000002 2.34 @30.00 — Program 2 mode symbol — ...

  • Casio TE-2400 - page 130

    130 Pr ogram r eading (P6) Department Program 1 Program 2 Program 3 Gr oup — Program 1 mode symbol — Department range — Department descriptor/rec-#/file-# — Unit quantity/unit price P 01 .................... #0001 - #0010 DEPT01 0001-05 1.23 @10.00 DEPT02 0002-05 2.34 @30.00 — Program 2 mode symbol — Department range — Department desc ...

  • Casio TE-2400 - page 131

    131 Pr ogram 6 TE-2200/2400 Dealer's Manual Clerk Program 2 Program 3 Hourly sales Scanning PLU — Program 2 mode symbol — Clerk range — Clerk descriptor/rec-#/file-# P 02.................... #0001 - #0010 C 01 0001-07 C 02 0002-07 C 03 0003-07 — Program 3 mode symbol — Clerk range — Clerk descriptor/rec-#/file-# — Check-#/drawer ...

  • Casio TE-2400 - page 132

    132 Pr ogram r eading (P6) Ta b le analysis Program 2 Program 3 Grand total General contr ol Special character — Program 2 mode symbol —T ab le descriptor/rec-#/file-# P 02 .................... TBL01 0001-18 TBL02 0002-18 TBL03 0003-18 — Program 3 mode symbol —T ab le descriptor/rec-#/file-# — Program data P 03 .................... TBL01 ...

  • Casio TE-2400 - page 133

    133 Pr ogram 6 TE-2200/2400 Dealer's Manual Report header T ax table Set menu table Batch X/Z Program 2 — Program 2 mode symbol — Report header character/rec-#/file-# P 02 .................... FIX 0001-24 TRANS 0002-24 PLU 0003-24 — Program 3 mode symbol — Rec-#/file-# —T ax table pro gram da ta P 03 .................... 0001-25 TX1 ...

  • Casio TE-2400 - page 134

    134 Pr ogram r eading (P6) Program 3 Clerk detail link Receipt message Check endorsement — Program 3 mode symbol — Batch report descriptor/rec-#/file-# — Execution mode/report code — Report code P 03 .................... BATCH 01 0001-29 00 11-12-17-15-00 00-00-00-00-00 BATCH 02 0002-29 — Program 3 mode symbol — Rec-#/file-# — Linked ...

  • Casio TE-2400 - page 135

    135 Pr ogram 6 TE-2200/2400 Dealer's Manual Slip/external printer messa ge Arrangement table Character recall Non-PLU table Check print contr ol — Program 2 mode symbol — Rec-#/file-# — Message P 02 .................... 0001-34 ************************ **************** 0002-34 — Program 3 mode symbol — Rec-#/file-#/arrangement table ...

  • Casio TE-2400 - page 136

    136 Pr ogram r eading (P6) Emplo yee Scheduler Bottle link table Mix & match Program 2 Program 3 — Program 2 mode symbol — Descriptor/rec-#/file-# P 02 .................... DISCOUNT01 0001-51 DISCOUNT02 0002-51 DISCOUNT03 0003-51 — Program 3 mode symbol — Descriptor/rec-#/file-# — Discount amount/status P 03 .................... DISCO ...

  • Casio TE-2400 - page 137

    137 Pr ogram 6 TE-2200/2400 Dealer's Manual One touch NLU T erminal connection table Program 2 Program 3 Printer connection table P 03 .................... 0001-77 Scanning PLU001 #1234567890123 — Program 3 mode symbol — Rec-#/file-# — Linked scanning PLU descriptor — Scanning PLU code P 02 .................... MC#01 0001-91 — Progra ...

  • Casio TE-2400 - page 138

    138 Pr ogram r eading (P6) Miscellaneous message Printing guidance message AT c o mmand Online passw ord I/O parameter table — Program 2 mode symbol — Rec-#/file-# — Program P 02 .................... 0001-96 AT command ************* ************************ ************** 0002-96 — Program 3 mode symbol — Rec-#/file-#/program P 03 ....... ...

  • Casio TE-2400 - page 139

    139 Pr ogram 6 TE-2200/2400 Dealer's Manual Registration guidance message X/Z guidance message Program guidance messa ge Error messa ge P 02 .................... #0001 E001 0001-80 Wrong mode 0002-80 #0003 E003 0003-80 — Program 2 mode symbol — Guidance-No. (internal use) — Error code/rec-#/file-# (do NOT change) — Error message/rec-#/ ...

  • Casio TE-2400 - page 140

    140 Pr ogram r eading (P6) ...

  • Casio TE-2400 - page 141

    141 Program 7 TE-2200/2400 Dealer's Manual Auto-program & system utilities (Program 7) A uto-pr ogramming Using the auto-program function makes it possible to sa ve and load the ter minal program f iles. Methods av ailable for saving the terminal program are as follo ws: 1) Saving onto a personal computer connected through online. 2) Savin ...

  • Casio TE-2400 - page 142

    142 Auto-pr ogramming/system utilities (P7) Command code list File File description Command Command Command Command No. 900 090/990 092/992 0xx/9xx System f iles 089 Consecutive number work ✔ --- --- --- 091 T erminal connection table ✔✔ ✔ 091/991 093 Printer connection ✔✔ ✔ 093/993 094 Start date ✔ --- --- --- 095 Initialize code ? ...

  • Casio TE-2400 - page 143

    143 Program 7 TE-2200/2400 Dealer's Manual File File description Command Command Command Command No. 900 090/990 092/992 0xx/9xx 418 (periodic 1 consolidation) ✔✔ --- --- 518 (periodic 2 consolidation) ✔✔ --- --- 020 Grand total ✔✔ ✔ 020/920 320 (daily consolidation) ✔✔ --- --- Check files 015 Check Index ✔✔ --- --- 056 S ...

  • Casio TE-2400 - page 144

    144 Auto-pr ogramming/system utilities (P7) From CF car d 6 7 s 6 20 s 66 a 66 s 8 PGM Mode switch File selection by the cursor keys (Cancellation) (Execution) Cursor ke ys TE-2200 TE-2400 A uto-programming operation To C F card 6 7 s 6 70 s 6 ::: a 6 :: - 6 a 66 s 8 PGM Mode switch * File name (file name:8 + suf fix: 3) (Cancellation) (Execution) ...

  • Casio TE-2400 - page 145

    145 Program 7 TE-2200/2400 Dealer's Manual Other utilities Issuing system error log report Repor t sample ---------(1033)--------- GT TIME 003783 START DATE 04-03-2006 ------------------------ 01 0001 0001 000505 1058 0102 02 0000 0000 000000 0000 0000 03 0000 0000 000000 0000 0000 —T otal working time — Start date — Rec-#/job No./error ...

  • Casio TE-2400 - page 146

    146 Auto-pr ogramming/system utilities (P7) Issuing CF card directory report ---------(1170)--------- 001 PGM 1000.090 10,953 04-30-2004 12:34 002 FILE0001.090 1,024 04-30-2004 12:34 ------------------------ —T itle — Auto-programming title — Index capacity — Date/time —A uto-programming file name — File capacity Cf. The meaning of f il ...

  • Casio TE-2400 - page 147

    147 Program 7 TE-2200/2400 Dealer's Manual Set the A T command to MODEM Before executing this command, y ou should connect a MODEM. ---------(4310)--------- Modem set ------------------------ AT&V ACTIVE PROFILE: Normal End — Modem response Repor t sample 6 7 s 6 2310 s PGM Mode switch 6 7 s 6 4310 s 6 a 6 s PGM Mode switch (Cancellation ...

  • Casio TE-2400 - page 148

    148 Auto-pr ogramming/system utilities (P7) ...

  • Casio TE-2400 - page 149

    149 Manager operation TE-2200/2400 Dealer's Manual Manager operation This section describes modes and operations that are generally used by management only . Besides user programming procedure, it also describes how to perform clerk assignments for clerk interrupt function and set stock quantities. Manager control mode (X1 mode) Manager contro ...

  • Casio TE-2400 - page 150

    150 Manager operation Stoc k quantity maintenance (PLU/flat PLU/scanning PLU) Y ou can make changes in actual stock quantities for PLU using the procedures described in this section. To add to the actual stoc k quantity of a PLU/flat PLU/scanning PLU Procedure f or PLU Procedure f or flat PLU To subtract from the actual stoc k quantity of a PLU/fla ...

  • Casio TE-2400 - page 151

    151 Manager operation TE-2200/2400 Dealer's Manual To input the new stock quantity of a PLU/flat PLU Procedure f or PLU Procedure f or flat PLU Clerk assignment Linking a clerk to a clerk interrupt buf fer enables clerk interrupt while a transaction is in progress. To link clerk button/ke y to interrupt buffer s Procedure To link clerk secret ...

  • Casio TE-2400 - page 152

    152 Manager operation Pr ogramming f or the Eur o This procedure is used for defining main/sub currenc y , currency e xchange r ate for the Euro, and dra wer number for sub currency at the same time. Please follo w the guidance receipts issued in each time during this procedure. General procedure Data (Currency definition type) 6 :::::: 6 a 6 : 66 ...

  • Casio TE-2400 - page 153

    153 Manager operation TE-2200/2400 Dealer's Manual T ype 3 procedure T ype 4 procedure Data (Currency con version rate) Data (Drawer number f or sub currency) Date (Unit price con version to Euro) A utomatic ex ecution of this pr ocedure on the preset date/time Y ou can ex ecute this Euro switchov er procedure automatically by using arrangemen ...

  • Casio TE-2400 - page 154

    154 Manager operation Pr ogramming f or the A ustralian GST This procedure is used for defining •T ax symbol (*) is pr inted. •T axable amount (receipt) is skipped. • “GST INCLUDED” is set to the TX1 descriptor . •“ T AXABLE AMT” is set to the T A1 descriptor . •T otal line is pr inted e ven in direct (cash) sales. • Australian ...

  • Casio TE-2400 - page 155

    155 Read/reset report TE-2200/2400 Dealer's Manual Read/reset repor t issuance Preparation for issuing report Money declaration There are two ways to declare the money in drawer amount; money declaration in the REG1/REG2/RF mode or money declaration in the X1/Z1 mode. Both declarations release “money declaration compulsory . ” Money declar ...

  • Casio TE-2400 - page 156

    156 Read/r eset r epor t Programmability Report issuance can be programmed with the following features: • Suppress printing of zero total lines. •M oney declaration compulsory • Report header message (report title) • Print sales ratio • Suppress printing of grand total • Print two copies of the fixed total reset report. • Print PLU nu ...

  • Casio TE-2400 - page 157

    157 Read/reset report TE-2200/2400 Dealer's Manual • Individual open chec k report Range report • PLU range report • Scanning PLU range report Report code (Read: #=0 / Reset: # = 1) Report name Consolidation file Ta rg et-No. Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2 Clerk individual 20017 2#117 2#217 20317 2#417 2#517 Cler ...

  • Casio TE-2400 - page 158

    158 Read/r eset r epor t Individual file repor t Report code (Read: #=0 / Reset: # = 1) Report name Consolidation file Ta rg et-No. Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2 Start number End number PLU range by record number 10014 1#114 1#214 10314 1#414 1#514 Start rec-No. End rec-No. PLU range by random code 10014 1#114 1#214 10314 ...

  • Casio TE-2400 - page 159

    159 Read/reset report TE-2200/2400 Dealer's Manual Batch report Report name Report code Daily Periodic 1 Periodic 2 PLU reset (no report) 50014 51114 51214 Scanning PLU reset (no report) 50026 ----- ----- Scanning PLU stock reset (no report) 50065 ----- ----- 6: : a Z1 X2/Z2 Mode switch Report code ~ 6 :::: 6 a :::: File reset The v alue (reco ...

  • Casio TE-2400 - page 160

    160 Read/r eset r epor t Report sample Financial report — X1 mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title — Report code — Declared amount of main currency — Dif ference between declared amount and accumulated amount — Declared amount of sub currency — Dif ference between declared amount and a ...

  • Casio TE-2400 - page 161

    161 Read/reset report TE-2200/2400 Dealer's Manual Fixed total report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Declared amount of main currency — Difference between declared amount and accumulated amount — Declared amount of sub currency — Dif ...

  • Casio TE-2400 - page 162

    162 Read/r eset r epor t T ransaction key report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Cash count — Cash total — Charge count — Check print count —V oid total —V alidation count — Store count — Recall count Tr ansaction keys are printed ...

  • Casio TE-2400 - page 163

    163 Read/reset report TE-2200/2400 Dealer's Manual PLU report All PLU/range/menu repor t — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — PLU range (range report only) — PLU character/quantity — Sales ratio/amount — Old price total — Red price total ...

  • Casio TE-2400 - page 164

    164 Read/r eset r epor t Best 50 report PLU stock report All PLU/range report — Ranking — PLU character/quantity — Sales ratio/amount — Old price total — Red price total — Discount total — PLU code (4-digit) or Random code (6-digit) — Quantity total — Amount total — Red price total — Discount total — Mode symbol/date/time ? ...

  • Casio TE-2400 - page 165

    165 Read/reset report TE-2200/2400 Dealer's Manual By group/department repor t — Classification title (by group/dept.) — PLU character/optimum stock quantity — Current stock quantity — PLU code (4-digit) or Random code (6-digit) —* means out of optimum stock quantity Department report All department report — Mode symbol/date/time ? ...

  • Casio TE-2400 - page 166

    166 Read/r eset r epor t Best 50 report — Ranking — Department character/quantity — Sales ratio/amount — Old price total — Red price total — Discount total — Quantity total — Amount total — Red price total — Discount total Group report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/ ...

  • Casio TE-2400 - page 167

    167 Read/reset report TE-2200/2400 Dealer's Manual Clerk report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Declared amount of main currency — Difference between declared amount and accumulated amount — Declared amount of sub currency — Differenc ...

  • Casio TE-2400 - page 168

    168 Read/r eset r epor t Hourly sales report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code —T ime frame — Customer count — Gross total — Net count — Sales ratio/Net amount — Customer count total — Gross amount total — Net count total — Net amoun ...

  • Casio TE-2400 - page 169

    169 Read/reset report TE-2200/2400 Dealer's Manual Ta b le analysis report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code —T ab le character/customer count — Sales ratio/net amount — Customer count total — Net amount total Z 03-04-2006 19:55 C 01 MC#0 ...

  • Casio TE-2400 - page 170

    170 Read/r eset r epor t Scanning PLU report By group/department repor t — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Classified title (by group/dept) — Scanning PLU character/quantity — Sales ratio/total — Scanning PLU code —T otal of this classific ...

  • Casio TE-2400 - page 171

    171 Read/reset report TE-2200/2400 Dealer's Manual Best 50 report Inactive report — Classified title — Ranking — Scanning PLU character/quantity — Sales ratio/total — Scanning PLU code —T otal of this classification — Quantity total — Amount total — Classified title — Scanning PLU character/quantity — Sales total — Scan ...

  • Casio TE-2400 - page 172

    172 Read/r eset r epor t Scanning PLU stoc k report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Mix & match character/count — Mix & match total — Count total — Amount total Z 03-04-2006 20:25 C 01 MC#01 000019 Z MIX&MATCH 0001 0001061 DISC ...

  • Casio TE-2400 - page 173

    173 Read/reset report TE-2200/2400 Dealer's Manual File reset PLU reset Scanning PLU reset — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter — Report code — Action/result — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter — ...

  • Casio TE-2400 - page 174

    174 Read/r eset r epor t ...

  • Casio TE-2400 - page 175

    175 Application systems TE-2200/2400 Dealer's Manual Application systems Scanning PLU Y ou can register items by scanning. System configuration of the scanning PLU system Setup 1. After connecting a barcode scanner , program I/O parameter table to f it the scanner . 2. Allocate scanning PLU function keys (such as <OBR>, <One touch NLU ...

  • Casio TE-2400 - page 176

    176 Application systems PLU maintenance There are three ways to maintain scanning PLU, i.e. not found PLU maintenance, batch PLU maintenance and direct PLU maintenance. Not found PLU maintenance When an item which code is not existed in the scanning PLU f ile is registered, the “Not found” error occurs. Y ou can register this item by not found ...

  • Casio TE-2400 - page 177

    177 Application systems TE-2200/2400 Dealer's Manual Scanning PLU registration By scanner/code input/one touch NLU key OPERA TION RECEIPT “Scanning” 123 456 B B F Not found PLU item OPERA TION RECEIPT “Scanning” “Not Found Error” 100 ! “Scanning” F Scan-PLU ($2.35) Item 1 ————————— (scan) PLU code 49012347 — ...

  • Casio TE-2400 - page 178

    178 Application systems Price change operation When a scanning PLU item is programmed to enable to change price, you can change the unit price temporarily . The preset price in the scanning PLU f ile is not changed by this operation. Y ou can restrict the temporary price is less/greater than the programmed unit price by the general function program ...

  • Casio TE-2400 - page 179

    179 Application systems TE-2200/2400 Dealer's Manual Mix & match discount There are three types of mix & match processing: • Discount 1 (discount every required quantity) • Discount 2 (discount one time per one transaction) • Discount 3 (discount continuously) Mix & match discount affects to the item totalizer , link departme ...

  • Casio TE-2400 - page 180

    180 Application systems Discount type 3: In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number during registration. And this discount is made after this item registration. OPERA TION RECEIPT “Scanning” “Scanning” “Scanning” “Scanning” F Mix & match discount is made ...

  • Casio TE-2400 - page 181

    181 Application systems TE-2200/2400 Dealer's Manual Printing on the external printer s Y ou can print receipts/orders on external printer . Maximum 2 external printers can be connected to a terminal. It is possible to print out to another printer (i.e. another external, or internal R/J) for backup. The printouts from R/J printer and external ...

  • Casio TE-2400 - page 182

    182 Application systems Time and attendance Y ou can control your employees’ working time. F or this function, the emplo yee file (f ile 061), the time and attendance f ile (f ile 019) and the <CLOCK-IN/OUT> ke y is necessary . Clock-in operation 1. Press the <CLOCK-IN/OUT> key , enter employee number and press the <CLOCK-IN/OUT> ...

  • Casio TE-2400 - page 183

    183 Tips TE-2200/2400 Dealer's Manual Tips Future order This is an enhancement of the training function. By using the original training specification, the training clerk cannot accept an y customer . Because no journal printing and no memory affection of this function is made . By using “Future order”, you can get this sales data and journ ...

  • Casio TE-2400 - page 184

    184 Tips A utomatic execution of Eur o switcho ver b y arrangement and scheduler The following sample sho ws an automatic execution program of arrangement and scheduler . Sample pr ogram Execution date/time: 31. December 2003 23:59 Currency definition type: 3 (Main currency = Euro, Sub currency = Local, Change = Euro) Currency con version rate: 1 E ...

  • Casio TE-2400 - page 185

    185 Appendix (Calculation method) TE-2200/2400 Dealer's Manual Appendix: Calculation method The follo wing calculation methods of totalizer memories are explained in this cha pter . • All formulas in these explanations are calculated in the registration mode. • In the RF mode, the values in totalizers are calculated using the opposite sign ...

  • Casio TE-2400 - page 186

    186 Appendix (Calculation method) T otal or Counter Increments or Decr ements by Sales total or tendered total by specified medium + Receiv ed on account total (Cash in draw er only) – Paid out (Cash in dra wer only) + Loan totals (by selected medium) – Pick up totals (by selected medium) – Change amounts (Cash in drawer only) – T otal of c ...

  • Casio TE-2400 - page 187

    187 Appendix (Font table) TE-2200/2400 Dealer's Manual Appendix: Font code tables These models hav e the capability to print/display in Sla vic, Greek, Cyrillic, Baltic, Arabic fonts. If you want to use these special font set, initialize the machine and enter the special initialization code (D 14 ~ D 12 ) before the original code 1 (D 11 ~ D 1 ...

  • Casio TE-2400 - page 188

    188 Appendix (Font table) Special font set Sla vic (Windows code page 852) Special initialization code D 14 D 13 D 12 = 010 Greek Special initialization code D 14 D 13 D 12 = 020 Éá Ó – Ĺ í Đ ß˝ ĺ ó Ď Ô ôú Ë M ˙ ö Ą ń ˘ L ą Á Ňň § l Ž Ã Ă Í Š ÷ Śž E ă Î š, śĘ Ș ě R ° Ö ę Ú¨ Ü ŕ • Ťź V ű  C ...

  • Casio TE-2400 - page 189

    189 Appendix (Font table) TE-2200/2400 Dealer's Manual Cyrillic (Windows code pa ge 866) Special initialization code D 14 D 13 D 12 = 030 Baltic Special initialization code D 14 D 13 D 12 = 040   ›  Ò fi  Ú ∏  Û π  Ù Ï   ı ï   ˆ Y  ˜ y  ¯ °  ˘ ...

  • Casio TE-2400 - page 190

    190 Appendix (Font table) Arabic Special initialization code D 14 D 13 D 12 = 050 ° ß . ∞ •ø √± £ 1 / 2 ¤ 1 / 4 « » ~ ~ Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code 128 144 160 176 192 208 224 240 129 145 161 177 193 209 225 241 130 146 162 178 194 210 226 242 131 147 163 179 195 211 227 243 ...

  • Casio TE-2400 - page 191

    191 Appendix (Peripheral configuration) TE-2200/2400 Dealer's Manual Appendix: P eripheral de vice configuration UP-360 Dip switch is located at the bottom of the printer . SW No . Function Reset by DTR reser v ed Protocol Tr ansmision speed Pa r ity undifined Low po wer comsumption undifined ON OFF Ye s N o --- fixed DTR/DSR XON/XOFF See tran ...

  • Casio TE-2400 - page 192

    192 Appendix (Peripheral configuration) Select these options: 1. Interface selection: SNI RS-232C interface selection 2. Baud rate: Baud rate = 9600 bps 3. Data format settings: Parity = Odd Stop bits = One Data bits = Eight bits 4. Software control: Hardware control = Enable CTS/R TS flo w control Software control = Disable Xon/Xof f 5. RS-232C A ...

  • Casio TE-2400 - page 193

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 193 Appendix: File record f ormat Fixed totalizer file Fixed totalizer (daily) File name: Fixed totalizer (daily) File No.: 001 Max. allocatable records: 99(fixed) Fixed totalizer (periodic/consolidation) File name: Fixed totalizer (periodic 1) File No.: 101 Max. allocatable records: ...

  • Casio TE-2400 - page 194

    194 Appendix (File record format) PLU file PLU (daily) File name: PLU File No.: 004 Max. allocatable records: Depend on the model PLU (periodic/consolidation) File name: PLU (periodic 1) File No.: 104 Max. allocatable records: see above File name: PLU (periodic 2) File No.: 204 Max. allocatable records: see above File name: PLU (daily consolidation ...

  • Casio TE-2400 - page 195

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 195 Gr oup file Group (dail y) File name: Group (daily) File No.: 006 Max. allocatable records: 99 Group (periodic/consolidation) File name: Group (periodic 1) File No.: 106 Max. allocatable records: 99 File name: Group (periodic 2) File No.: 206 Max. allocatable records: 99 File name ...

  • Casio TE-2400 - page 196

    196 Appendix (File record format) Clerk file Clerk (pr ogramming) File name: Clerk (programming) File No.: 007 Max. allocatable records: 99 Clerk detail (dail y , periodic/consolidation) File name: Clerk detail (daily) File No.: 011 Max. allocatable records: 99 x 99 File name: Clerk detail (periodic 1) File No.: 111 Max. allocatable records: 99 x 9 ...

  • Casio TE-2400 - page 197

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 197 Hourly sales file Hourly sales (dail y) File name: Hourly sales (daily) File No.: 009 Max. allocatable records: 99 Hourly sales (periodic/consolidation) File name: Hourly sales (periodic 1) File No.: 109 Max. allocatable records: 99 File name: Hourly sales (periodic 2) File No.: 2 ...

  • Casio TE-2400 - page 198

    198 Appendix (File record format) Scanning PLU files Scanning PLU file (daily) File name: Scanning PLU File No.: 016 Max. allocatable records: Depend on the model Non PLU tab le file (program) File name: Non PLU table File No.: 040 Max. allocatable records: 100 Batch maintenance PLU file (pr ogram) File name: Batch maintenance PLU File No.: 070 Max ...

  • Casio TE-2400 - page 199

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 199 One touch NLU table file File name: One touch NLU table File No.: 077 Max. allocatable records: 999 Mix & match table file Mix & match table file (dail y) File name: Mix & match table (daily) File No.: 051 Max. allocatable records: 99 Mix & match table file (period ...

  • Casio TE-2400 - page 200

    200 Appendix (File record format) Ta b le analysis file Ta b le analysis (daily) File name: Table analysis (daily) File No.: 018 Max. allocatable records: 99 05 1 0 Counter T otalizer (customer) 01 2 1 51 8 2 3 2 8 Character Counter T otalizer (customer) Minimum check No. Maximum check No. Ta b le analysis (periodic/consolidation) File name: Table ...

  • Casio TE-2400 - page 201

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 201 Grand total file Grand total (daily) File name: Grand total (daily) File No.: 020 Max. allocatable records: 3 (fixed) Grand total (consolidation) File name: Grand total (consolidation) File No.: 320 Max. allocatable records: 3 (fixed) 01 2 2 0 Character T otalizer 08 T otalizer Ge ...

  • Casio TE-2400 - page 202

    202 Appendix (File record format) Report header file Report header File name: Report header File No.: 024 Max. allocatable records: 27 (fixed) T ax table file T ax table File name: Tax table File No.: 025 Max. allocatable records: 10 Set menu tab le file Set menu table File name: Set menu table File No.: 028 Max. allocatable records: 999 01 2 Chara ...

  • Casio TE-2400 - page 203

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 203 Batch X/Z file Batch X/Z File name: Batch X/Z File No.: 029 Max. allocatable records: 10 Receipt message file Receipt message File name: Receipt message File No.: 032 Max. allocatable records: 42 Chec k endorsement messa ge file Check endor sement message File name: Check endorsem ...

  • Casio TE-2400 - page 204

    204 Appendix (File record format) Arrangement file Arrangement file File name: Arrangement File No.: 038 Max. allocatable records: 9999 Character recall file Character recall File name: Character recall File No.: 039 Max. allocatable records: 999 Chec k print file Chec k print File name: Check print File No.: 041 Max. allocatable records: 9 Schedul ...

  • Casio TE-2400 - page 205

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 205 System files Character key tab le file File name: Character key table File No.: 046 Max. allocatable records: depends on the model Ke y/character ke y table recor d No. TE-2200 TE-2400 (Eu) No character can be programmed to shadowed k eys. 063 056 054 052 046 040 034 028 022 016 0 ...

  • Casio TE-2400 - page 206

    206 Appendix (File record format) Ke y table file File name: Character key table File No.: 074 Max. allocatable records: depends on the model Key/key table record No. TE-2200 TE-2400 (Eu) The shadowed ke y cannot be pr ogrammed with any other function k e ys. 071 064 062 060 054 048 042 036 030 024 018 081 076 070 065 063 061 059 053 047 041 035 02 ...

  • Casio TE-2400 - page 207

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 207 T erminal connection table file File name: Terminal connection table File No.: 091 Max. allocatable records: 1 Printer connection table File name: Printer definition table File No.: 093 Max. allocatable records: 7 Operation star t date file File name: Operation start date File No. ...

  • Casio TE-2400 - page 208

    208 Appendix (File record format) 08 Character 04 Program 04 8 Program 02 4 5 6 9 1 1 Error code Job No. Source terminal Ta rg et terminal Date T ime 06 2 Character AT command file File name: AT command File No.: 096 Max. allocatable records: 2 (fixed) Online passw ord file File name: Online password File No.: 097 Max. allocatable records: 1 I/O pa ...

  • Casio TE-2400 - page 209

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 209 Guidance message files Error messa ge file File name: Error message File No.: 080 Max. allocatable records: 191(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 Error code (do NOT change) 002 Mode switch position changed before finalization. 003 Error code (do N ...

  • Casio TE-2400 - page 210

    210 Appendix (File record format) Rec-No. Meaning Default (English) message 053 Error code (do NOT change) 054 Finalization of a transaction attempted without confirming the subtotal. 055 Error code (do NOT change) 056 Finalization of a transaction attempted without confirming of the food stamp subtotal. 057 Error code (do NOT change) 058 Finalize ...

  • Casio TE-2400 - page 211

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 211 Rec-No. Meaning Default (English) message 115 Error code (do NOT change) 116 Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (1/2) 117 Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (2/2) 118 Error ...

  • Casio TE-2400 - page 212

    212 Appendix (File record format) Rec-No. Meaning Default (English) message 183 Error code (do NOT change) 184 Attempt to print the last separated transaction on slip. (1/3) 185 Attempt to print the last separated transaction on slip. (2/3) 186 Attempt to print the last separated transaction on slip. (3/3) 187 Error code (do NOT change) 188 Printer ...

  • Casio TE-2400 - page 213

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 213 Miscellaneous message file File name: Miscellaneous message File No.: 078 Max. allocatable records: 58 (fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 Register total working time message 002 Register start date message 003 RAM message in PGM5 004 bytes message ...

  • Casio TE-2400 - page 214

    214 Appendix (File record format) Printing guidance message file File name: Printing guidance message File No.: 079 Max. allocatable records: 85(fixed) 02 4 Character Rec-No. Meaning Default (English) message 001-4 not used 005 Direct maintenance result: success 006 Direct maintenance result: failure 006 Batch maintenance result: success 008 Batch ...

  • Casio TE-2400 - page 215

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 215 Rec-No. Meaning Default (English) message 073 Euro currency system setup message 5-4 074 Euro currency system setup message 5-5 075 Euro currency system setup message 6-7 076 Euro currency system setup message 6-8 077 Euro currency system setup message 7-1 078 Euro currency system ...

  • Casio TE-2400 - page 216

    216 Appendix (File record format) X/Z guidance message file File name: X/Z guidance message File No.: 082 Max. allocatable records: 48(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 PLU range report message 1st line 002 Input start No. message 1st line 003 Input start No. message 2nd line --- PLU range report message 1st line ( ...

  • Casio TE-2400 - page 217

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 217 Rec-No. Meaning Default (English) message 019 PLU best report message 1st line --- Input start No. message 1st line (quote from rec-002) --- Input start No. message 2nd line (quote from rec-003) --- PLU best report message 1st line (quote from rec-016) --- Input end No. message 1s ...

  • Casio TE-2400 - page 218

    218 Appendix (File record format) Program guidance messa ge file File name: Program guidance message File No.: 083 Max. allocatable records: 93(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 Range program message 1st line 002 Input start No. message 1st line 003 Input start No. message 2nd line --- Range program message 1st lin ...

  • Casio TE-2400 - page 219

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 219 Rec-No. Meaning Default (English) message 028 Batch maintenance programming message 1st line 029 Input batch maintenance record No. message --- Batch maintenance programming message 1st line (quote from rec-028) 030 Input action code message 1st line 031 Input action code message ...

  • Casio TE-2400 - page 220

    220 Appendix (File record format) Rec-No. Meaning Default (English) message 064 Please wait message 065 066 Auto-program (register to register) message 067 Input target machine No. message 1st line 068 Input target machine No. message 2nd line --- Auto-program (register to register) message (quote from rec-066) 069 Input command code message 1st li ...

  • Casio TE-2400 - page 221

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 221 Registration guidance message file File name: Registration guidance message File No.: 081 Max. allocatable records: 23(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 Guidance message of registering not found PLU 1st line 002 Guidance message of registering not ...

  • Casio TE-2400 - page 222

    222 Appendix (File record format) Help message file File name: Help message File No.: 085 Max. allocatable records: 199 (fixed) Note: It is necessary to allocate this file, if you want to make your original help. Rec-No. Meaning Default (English) message 001 Header message of help receipt (1/19) 002 Header message of help receipt (2/19) 003 Header ...

  • Casio TE-2400 - page 223

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 223 Rec-No. Meaning Default (English) message 050 Second help item message (14/53) 051 Second help item message (15/53) 052 Second help item message (16/53) 053 Second help item message (17/53) 054 Second help item message (18/53) 055 Second help item message (19/53) 056 Second help i ...

  • Casio TE-2400 - page 224

    224 Appendix (File record format) Rec-No. Meaning Default (English) message 111 Third help item message (22/26) 112 Third help item message (23/26) 113 Third help item message (24/26) 114 Third help item message (25/26) 115 Third help item message (26/26) 116 Fourth help item message (1/20) 117 Fourth help item message (2/20) 118 Fourth help item m ...

  • Casio TE-2400 - page 225

    Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 225 Rec-No. Meaning Default (English) message 172 Fifth help item message (37/64) 173 Fifth help item message (38/64) 174 Fifth help item message (39/64) 175 Fifth help item message (40/64) 176 Fifth help item message (41/64) 177 Fifth help item message (42/64) 178 Fifth help item mes ...

  • Casio TE-2400 - page 226

    226 Appendix (File record format) ...

  • Casio TE-2400 - page 227

    227 Appendix (Compulsory) TE-2200/2400 Dealer's Manual Appendix: Compulsor y This section explains the priority compulsions and the methods to solv e them. Compulsions at the first item registration Compulsion during item registration Compulsions during finalizing Compulsions after finalization Released by Priority Error code Meaning <OPEN2 ...

  • Casio TE-2400 - page 228

    228 Appendix (Compulsory) ...

  • Casio TE-2400 - page 229

    229 Appendix (Error code) TE-2200/2400 Dealer's Manual Appendix: Error code E001 E003 E004 E005 E008 E009 E010 E011 E016 E017 E018 E019 E021 E023 E024 E026 E029 E030 E031 E032 E033 E035 E036 E037 E038 E040 E041 E042 E044 E045 E046 E047 E048 Mode switch position changed before finalization. Clerk button pressed before f inalization of a registr ...

  • Casio TE-2400 - page 230

    230 Appendix (Error code) Err or code (…continued) Error code Message Meaning Action E049 E050 E051 E052 E053 E054 E055 E056 E059 E060 E061 E062 E064 E066 E075 E085 E100 E101 E103 E105 E106 E112 E114 E139 E146 E164 E165 E166 E176 E200 E201 E202 E203 E205 CHECK memory full DETAIL memory full CHK/TBL No. is occu- pied CHK/TBL No. is busy CHK/TBL No ...

  • Casio TE-2400 - page 231

    231 Appendix (Error code) TE-2200/2400 Dealer's Manual System err or code Error code Meaning File I/O errors 750 File cannot be created. 751 No designated drive 752 FCB area shortage of flash memory 753 No appropriate record number is designated. 754 No partition exists. 755 No vacant record is remained. 756 Changing is not permitted. 757 The ...

  • Casio TE-2400 - page 232

    232 Appendix (Error code) ...

  • Casio TE-2400 - page 233

    233 Index TE-2200/2400 Dealer's Manual Inde x A action code 102 activation of batch maintenance 99 add check 31, 79, 115 add-in rate tax 88 add-in tax 186 add-on rate tax 85 add-on tax 185 Arabic font 190 arrangement 25, 31, 69, 90, 115, 204 arrangement table 25, 127, 135 AT command 24, 112, 127, 138 AT command file 208 Australian GST 47, 154 ...

  • Casio TE-2400 - page 234

    234 Index D date order 33 date setting 123 decimal point 31, 115 declaration 31, 38, 79, 115, 160, 161, 167, 186 deleting a file from CF card 146 department 24, 31, 52, 54, 115, 116, 127, 130, 159 department best 50 159 department file 195 department report 165 deposit 31, 63, 115 descriptor 105 diag mode 20 direct maintenance PLU 25, 176 direct ma ...

  • Casio TE-2400 - page 235

    235 Index TE-2200/2400 Dealer's Manual M manager control mode 149 manager operation 149 manual tax 31, 66, 115, 185 media change 31, 79, 115 memory map 15 menu 72 menu & price shift 37 menu shift 31, 115 merchandise subtotal 31, 75, 115 message 109 message control 46 minus 31, 62, 115, 125, 185 miscellaneous message 26, 112, 127, 138 misce ...

  • Casio TE-2400 - page 236

    236 Index program / message / b uff er file 26 program 1 programming in X1 mode 149, 154 program guidance message 26, 113, 127, 139 program guidance message file 218 program reading report of program 1 126 program reading report of program 2 121 program reading report of program 3 104 program reading report of program 4 32 program reading report of ...

  • Casio TE-2400 - page 237

    237 Index TE-2200/2400 Dealer's Manual T table analysis 25, 89, 106, 127, 132, 159 table analysis file 200 table analysis report 169 table number 31, 79, 115 table number range 82 table range 83 takeout 31, 78, 115, 183 tax e x empt 31, 115 tax shift 31, 71, 115 tax system 34 tax table 26, 84, 127, 133 tax table file 202 taxable amount subtota ...

  • Casio TE-2400 - page 238

    ...

  • Casio TE-2400 - page 239

    ...

  • Casio TE-2400 - page 240

    CASIO COMPUTER CO ., L TD . 6-2, Hon-machi 1-chome Shibuy a-ku, T oky o 151-8543, Japan IR0508-000501A TE22_24DM*E Printed in Japan ...

Manufacturer Casio Category Cash Register

Documents that we receive from a manufacturer of a Casio TE-2400 can be divided into several groups. They are, among others:
- Casio technical drawings
- TE-2400 manuals
- Casio product data sheets
- information booklets
- or energy labels Casio TE-2400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Casio TE-2400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Casio TE-2400, service manual, brief instructions and user manuals Casio TE-2400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Casio TE-2400.

Similar manuals

A complete manual for the device Casio TE-2400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Casio TE-2400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Casio TE-2400.

A complete Casio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Casio TE-2400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Casio TE-2400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Casio TE-2400, that we can find in the current document
3. Tips how to use the basic functions of the device Casio TE-2400 - which should help us in our first steps of using Casio TE-2400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Casio TE-2400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Casio TE-2400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Casio TE-2400?

Use the form below

If you did not solve your problem by using a manual Casio TE-2400, ask a question using the form below. If a user had a similar problem with Casio TE-2400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)