English dropdown-ico

Manual Breckwell P23FSL

31 pages 1.01 mb
Download

Go to site of 31

Summary
  • Breckwell P23FSL - page 1

    PROFESSIONAL INSTALL ATION IS HIGHLY RECO MMENDED Manufactured by Breckwell Hearth Products Eugene, Oregon Grand Prairie, Texas OWNER’S MANUAL TRADITION SERIES P23  BRECKWELL HEARTH PRODUCTS C - L - 068 7 /04 P23FSL P23I P23FSA • W ARNING : If your appliance is not properly installed a house fire may result. For your safety, follow the insta ...

  • Breckwell P23FSL - page 2

    Thank you for purchasing the Breckwell Pellet Burning Stove. You are now prepared to burn wood in the most efficient, convenient way possible. To achieve the safest, most efficient and most enjoyable performance from your stove, you must do three things: 1) Install it properly; 2) Operate it correctly; and 3) Maintain it regularly. The purpose of t ...

  • Breckwell P23FSL - page 3

    • Do not operate your stove if you smell smoke coming from it. Turn it off, monitor it, and call your dealer. • Keep foreign objects out of the hopper. • Never use gasoline, gasoline - type lantern fuel, kerosene, charcoal lig hter fluid, or similar liquids to start or “freshen up” a fire in this stove. Keep all such liquids well away fro ...

  • Breckwell P23FSL - page 4

    INTRODUCTION ----------------------------------------------------------------------------------- ------ ---- 2 SAFETY PRECAUTIONS ------------------------------------------------------------------------ ---------- 3 SPECIFICATIONS --------------------------------------------------------------------------------- ---------- 5 INSTALLATION ----------- ...

  • Breckwell P23FSL - page 5

    SPECIFICATIONS FREESTANDING: Width: 22 ½” Height: 29” (with pedestal) , 28 ½” (with legs) Depth: 27” (excluding ash lip) Weight: 210 lbs. Pedestal: 40 lbs. Legs: 13 lbs. Flue size: 3” or 4” Hopper Capacity: Up to 60 lbs. (this can vary widely depending on pellet size, length, and diameter) EPA status: exempt Burn time: 1 lb. to 5 lbs. ...

  • Breckwell P23FSL - page 6

    COMBUSTION AIR SUPPLY For a mobile home installation the stove must be connected to an outside source of combustion air. A 2” inside diameter metallic pipe, either flexible or rigid, may be attach ed to the inlet at the stove’s rear (refer to figures 5 and 6). A rodent guard (minimum ¼” wire mesh)/wind hood must be used at the terminus (refe ...

  • Breckwell P23FSL - page 7

    Equivalent Vent Length (EVL) The longer the run of pipe in your installation (bot h with insert and freestan ding models ), the more restriction there is in the system. Therefore, larger diameter pipe should be used. • Use 4” pipe if you have more than 15 feet of equivalent vent length. • Hori zontal runs shall not exceed 10 feet of EVL. • ...

  • Breckwell P23FSL - page 8

    B. HORIZONTALLY THROUGH WALL (refer to Figure 9) NOTE: Follow L - Vent chimney manufacturer’s instructions. 1. Position stove, adhering to clearances shown in Figures 1 & 2. 2. Locate position of hole in wal l; directly behind stove exhaust vent (refer to figure 5). 3. Always maintain 3” clearance from combustible materials. 4. Install L - ...

  • Breckwell P23FSL - page 9

    B. VERTICALLY WITH NEW CHIMNEY SYSTEM (Refer to Figure 10) NOTE: Follow L - Vent chimney manufacturer’s instructions. OPTION: To achieve a center vert ical installation a 45º elbow and a clean - out tee can be used to offset the pipe from the exhaust outlet to the rear center of the stove. OPTION: Install L - Vent elbow in place of clean - out t ...

  • Breckwell P23FSL - page 10

    D. VERTICALLY INTO EXISTING MASONRY FIREPLACE NOTE: Follow L - Vent chimney manufacturer’s instructions. 1. Have the masonry chimney inspected by a qualified chimney sweep or installer to determi ne its structural condition. 2. You will need a pipe length equal to the chimney height from the hearth. If outside combustion air is to be used, you wi ...

  • Breckwell P23FSL - page 11

    INSERT INSTALLATIONS Insert installations must be vented with 3” or 4” pipe. Pipe may be single wall stainless steel flexible pipe. Vent may terminate within chimney beyond a blanking plate or extend to the chimney top. See “ COMBUSTION AIR SUPPLY ” fo r outside air access information. The fireplace and chimney should be cleaned thoroughly ...

  • Breckwell P23FSL - page 12

    B. WHEN VENT PIPE EXTENDS TO CHIMNEY TOP (Refer to Figures 16 and 17) 1. You will need a pipe leng th equal to the chimney height (from hearth) plus 6 inches. If outside combustion air is to be used, you will need a pipe length (see “ COMBUSTION AIR SUPPLY ” ) equal to the chimney height plus 12 inches. 2. Attach cerablanket wrap to that end of ...

  • Breckwell P23FSL - page 13

    D. AS A BUILT - IN FIREPLACE Figures 18 and 19 describe a P23 installation vented into either a special chase built outside an outer wall or a false inside wall. This is especially suited f or new construction or remodeling. The equipment compartment (sides and rear of the stove in fireplace) must be enclosed per the applicable electrical standards ...

  • Breckwell P23FSL - page 14

    E. INSTALLATION IN TO A FACTORY BUILT (METAL) FIREPLACE (Refer to figure 20) When installing into a factory built fireplace, the firebox must accept the insert without modification other than removing bolted or screwed together pieces such as smoke shelf/deflect ors, ash lips, screen or door tracks and damper assemblies. These items must be reinsta ...

  • Breckwell P23FSL - page 15

    PANEL CONTROLS (See Figure 21) The blowers and automatic fuel supply are controlled from a panel on the left - hand side of the P23. The control panel functions are as follows. a. ON/OFF SWITCH • When pushed the stove will a utomatically ignite. No other firestarter is necessary. The igniter will stay on for at least 10 and up to 15 minutes, depe ...

  • Breckwell P23FSL - page 16

    PROPER FUEL THIS STOVE I S APPROVED FOR BURNING PELLETIZED WOOD FUEL ONLY! Factory - approved pellets are those ¼” or 5/16” in diameter and not over 1” long. Longer or thicker pellets sometimes bridge the auger flights, which prevents proper pellet feed. Burning wood in forms other than pellets is not permitted. It will violate the building ...

  • Breckwell P23FSL - page 17

    RE - STARTING A WARM STOVE If the stove has been shut off, and you want to re - start it while it is still warm, the “on/off” button must be held down for 2 seconds. IF STOVE RUNS OUT OF PEL LETS The fire goes out and the auger motor and blowers will run until the stove cools. This will take 30 to 45 minutes. After the stove components stop run ...

  • Breckwell P23FSL - page 18

    OPTIONAL THERMOSTAT A thermostat may help you maintain a constant house temperature automatica lly. A millivolt thermostat is required. A fixed wall mount or Breckwell’s hand held model can be used. The control panel can be set up two ways to operate your stove in thermostat mode. THERMOSTAT INSTALLATION • A MILLIVOLT THERMOSTAT IS REQUIRED. ? ...

  • Breckwell P23FSL - page 19

    OPERATING SAFETY PRECAUTIONS PLEASE READ THIS! a. Hot while in operation. Keep children, clothing, and furniture away. Contact may cause skin burns. b. If you notice a smoldering fire (burnpot full but no visible flame) AND a heavy smoke buildup in firebo x, immediately TURN OFF the stove, but DO NOT unplug it. Do not open the door, change the damp ...

  • Breckwell P23FSL - page 20

    FAILURE TO CLEAN AND MAINTAIN THIS UNIT AS INDICATED CAN RESULT IN POOR PERFORMANCE AND SAFETY HAZARDS. NEVER CLEAN WHEN HOT. NOTE: Inspe ct burn pot periodically to see that holes have not become plugged, if so, clean thoroughly. ASH REMOVAL Ashes should be placed in a metal container with a tight - fitting lid. The closed container or ashes shoul ...

  • Breckwell P23FSL - page 21

    VACUUM USE If a vacuum is used to clean your unit, we suggest using a vacuum designed for ashes. (We recommend LoveLess Ash Vac, 1 - 800 - 568 - 3949 Ext. #27) Some regular vacuums and shop vacs leak ash into the room. Your vacuum or shop vac may have a special filter or bag available to eliminate this leakage. CLEANING a. Heat Exchange Tubes – Y ...

  • Breckwell P23FSL - page 22

    CHIMNEY CLEANING a. Creosote Formation – When any wood is burned slowly, it produces tar and other organic vapors, which combine with expelled moisture to form creosote. The creosote vapors condense in the relatively cool chimney flue or a newly started fire or from a slow - burning fi re. As a result, creosote residue accumulates on the flue lin ...

  • Breckwell P23FSL - page 23

    When your stove acts out of the ordinary, the first reaction is to call for help. This guide may save time and money by enabling you to solve simpl e problems yourself. Problems can be caused by to only five factors: 1) poor fuel; 2) poor operation or maintenance; 3) poor installation; 4) component failure; 5) factory defect. You can usually solve ...

  • Breckwell P23FSL - page 24

    STOVE SHUTS OFF AND THE # 3 LIGHT FLASHES Possible Causes: Possible Remedies: (Unplug stove first when possible) 1. The hopper is out of pellets. Refill the hopper. 2. The air damper is too far open for a low feed setting. If burning on the low setting, you may need to close the damper all the way (push the knob in so it touches the side of the sto ...

  • Breckwell P23FSL - page 25

    STOVE FEEDS PELLETS, BUT WILL NOT IGNI TE Possible Causes: Possible Remedies: 1. Air damper open too far for ignition. Push the air damper in closer to the side of the stove for startup. In some situations it may be necessary to have the damper completely closed for ignition to take place. After there is a flame, the damper can then be adjusted for ...

  • Breckwell P23FSL - page 26

    STOVE WILL NOT FEED PELLETS, BUT FUEL FEED LIGHT COMES ON AS DESIGNED Possible Caus es : Possible Remedies: 1. F use on control board blew Remove the control board. On the back there is one fuse. If it appears to be bad, replace it with a 5 Amp 250 Volt fuse. Plug the stove back in and try to run the unit. 2. High limit switch has trippe d or is de ...

  • Breckwell P23FSL - page 27

    • GLASS “SOOT’S” UP AT A VERY FAST RATE • FLAME IS LAZY, DARK, AND HAS BLACK TIPS • AFTER STOVE HAS BEEN ON FOR A WHILE, THE BURNPOT OVERFILLS Possible Causes: Possible Remedies: 1. Stove or vent pipe is dirty, which restricts airflow through the burnpot. Follow all cleaning procedure in the maintenance section of the owner’s manual. ...

  • Breckwell P23FSL - page 28

    HIGH LIMIT SWITCH KEEPS TRIPPING Possible Causes: Possible Remedies: 1. The convec tion blower is overheating and tripping the internal temperature shutoff. C lean any dust off of the windings and fan blades. If cleaning the blower does not help, the blower may be bad. 2. The stove is being left on the highest setting for extended peri ods of time. ...

  • Breckwell P23FSL - page 29

    ELECTRICAL DIAGRAM FIGURE 30 29 ...

  • Breckwell P23FSL - page 30

    Contact an Authorized Breckwell Pellet Stove Dealer to obtain any of these parts. Never use substitute materials. Use of non - approved parts can result in poor performance and safety hazards. ITEM PART # Air Switch C - E - 200 Air Switch Hose C -M- 340 - T Auger Motor C - E - 017 Breckwell Maintenance Tool A - TOOL - 96 Brick Panel Set, Ceramic ? ...

  • Breckwell P23FSL - page 31

    LIFETIME LIMITED WARRANTY Breckwell Hearth Products warrants to the original consumer purchaser that the Breckwell stove in its original installation is free from defects in material and workmanship from the original dat e of purchase as follows: Steel fabricated components, excluding burnpot inserts, are covered for five years. Glass and burnpot i ...

Manufacturer Breckwell Category Fire Pit

Documents that we receive from a manufacturer of a Breckwell P23FSL can be divided into several groups. They are, among others:
- Breckwell technical drawings
- P23FSL manuals
- Breckwell product data sheets
- information booklets
- or energy labels Breckwell P23FSL
All of them are important, but the most important information from the point of view of use of the device are in the user manual Breckwell P23FSL.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Breckwell P23FSL, service manual, brief instructions and user manuals Breckwell P23FSL. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Breckwell P23FSL.

Similar manuals

A complete manual for the device Breckwell P23FSL, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Breckwell P23FSL by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Breckwell P23FSL.

A complete Breckwell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Breckwell P23FSL - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Breckwell P23FSL, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Breckwell P23FSL, that we can find in the current document
3. Tips how to use the basic functions of the device Breckwell P23FSL - which should help us in our first steps of using Breckwell P23FSL
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Breckwell P23FSL
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Breckwell P23FSL in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Breckwell P23FSL?

Use the form below

If you did not solve your problem by using a manual Breckwell P23FSL, ask a question using the form below. If a user had a similar problem with Breckwell P23FSL it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)