English dropdown-ico

Manual AutoTek AT1200

13 pages 2.37 mb
Download

Go to site of 13

Summary
  • AutoTek AT1200 - page 1

    EVOL UTION OF POWER SUPER SPOR T A T-SERIES AMPLIFIERS A T950 / A T1200 A T2000.1 / A T3000.1 A T1000 / A T1500 R ...

  • AutoTek AT1200 - page 2

    SUPER SPOR T A T-SERIES AMPLIFIERS INDEX P AGE Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The Super Sport A T -Series amplifiers have been designed to a very high level of performance, with features unavailable in any other products. All of the amplifiers ha ...

  • AutoTek AT1200 - page 3

    GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for ...

  • AutoTek AT1200 - page 4

    2 AMPLIFIER FEA TURE DESCRIPTIONS SUPER SPORT A T -SERIES AMPLIFIERS: ! Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged ! All Autotek amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “ PROTECT” LED. operation except the mono amp ...

  • AutoTek AT1200 - page 5

    A T1000 / A T1500 / 2 CHANNEL AMPLIFIER APPLICA TIONS 3 FULL RANGE MONO This is the most basic application for the SUPER SPORT Series 2 channel amplifiers. 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables. 2. Crossover Switch: The X-OVER switch must be in the FULL position. 3. Crossover frequency ...

  • AutoTek AT1200 - page 6

    A T1000 / A T1500 2-CHANNEL AMPLIFIER APPLICA TIONS 4 Stereo high pass with mono low-pass in a 2 way active, or bi-amplified system 2 CHANNEL HIGHS AMPLIFIER 2 CHANNEL SUB BASS AMPLIFIER In this application we will use a 2 channel amplifier for the high frequencies, and Lows amplifier: a second one for the low frequencies, or mono sub bass. Please ...

  • AutoTek AT1200 - page 7

    5 A T950 / A T1200 / 4 CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL FULL RANGE SYSTEM Level control checklist: Here we show how to use the 4 channel amplifiers as straight forward discrete 4 - Refer to the section “Setting up systems after installation for best performance” channel full range units. Minimum final l ...

  • AutoTek AT1200 - page 8

    FULL RANGE STEREO LINE INPUT NOT USED Y -ADAPT OR Note: Y ou can use the Radio/CD designated mono line output or a full range stereo line output. For full range stereo line output, you will need an optional “Y -Adaptor” as shown P ARALLEL MONO SUBWOOFERS 2- OHMS EACH MINIMUM GND REM +12V POWER INPUT FUSE SPEAKER OUTPUT + + - - 6 A T2000.1 / A T ...

  • AutoTek AT1200 - page 9

    7 ...

  • AutoTek AT1200 - page 10

    8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE A T2000.1 / A T3000.1 General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction. The point that you set it at cuts of f any frequencies from reproduction beyond ...

  • AutoTek AT1200 - page 11

    9 TROUBLESHOOTING A SYSTEM The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Autotek amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on. This ...

  • AutoTek AT1200 - page 12

    Maxxsonics Limited W ar r anty As the manufacturer of Maxxsonics, Autotek, Cr unch, MB Quar t and Hifonics car audio products Maxxsonics USA Inc. War r ants to the original consumer purchaser the amplifier to be free fr om defects in ma terial and workmanship for one (1) Y ear fr om date of pur chase. All other par ts and accessories of the system ...

  • AutoTek AT1200 - page 13

    P ART#S309 ...

Manufacturer AutoTek Category Stereo Amplifier

Documents that we receive from a manufacturer of a AutoTek AT1200 can be divided into several groups. They are, among others:
- AutoTek technical drawings
- AT1200 manuals
- AutoTek product data sheets
- information booklets
- or energy labels AutoTek AT1200
All of them are important, but the most important information from the point of view of use of the device are in the user manual AutoTek AT1200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AutoTek AT1200, service manual, brief instructions and user manuals AutoTek AT1200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AutoTek AT1200.

Similar manuals

A complete manual for the device AutoTek AT1200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AutoTek AT1200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AutoTek AT1200.

A complete AutoTek manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AutoTek AT1200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AutoTek AT1200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AutoTek AT1200, that we can find in the current document
3. Tips how to use the basic functions of the device AutoTek AT1200 - which should help us in our first steps of using AutoTek AT1200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AutoTek AT1200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AutoTek AT1200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AutoTek AT1200?

Use the form below

If you did not solve your problem by using a manual AutoTek AT1200, ask a question using the form below. If a user had a similar problem with AutoTek AT1200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)