English dropdown-ico

Manual Packard Bell H5

27 pages 13.54 mb
Download

Go to site of 27

Summary
  • Packard Bell H5 - page 1

    V ersa M440 Disassembly Manual ...

  • Packard Bell H5 - page 2

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 2 Table of contents Overview ................ ................... ................... ................... ................... ................... ........ .............. ................... ......... 3 Technician Notes .............................. ... .... .... .... ... ........ .... .... ... ...

  • Packard Bell H5 - page 3

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 3 Overview This document contains step-by-steps disassemb ly instructions for the Versa M440/Ea syNote H5 chassis. The instructions are illustrated where nece ssary with images of the part that is being removed or disassembled . Furthermore, the screw s that are re moved are s h own nex t to th ...

  • Packard Bell H5 - page 4

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 4 Hazardous Voltag e There is hazardous voltage pr esent inside the computer when it is connect to an AC supply , even wh en the computer’s power switch is off. Exposur e to hazardous voltage could cause personal injury. To avoid r isk of injury, contact an Authorized Service Provider for pro ...

  • Packard Bell H5 - page 5

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 5 Removing the Battery Perform the following steps to remove the battery: 1. Make sure to power off the Versa M440 /EasyNote H5. 2. Turn the unit upside down. 3. Unscrews the bottom cover do or and slide it out of its place as the ar row shows in Fig. 1 Fig. 1 Removing Bottom cover door 4. Pull ...

  • Packard Bell H5 - page 6

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 6 Removing the Memory Module To remove the Memor y Module, first remove th e battery (see Removing the Battery ), then perform the following steps: 1. Unclip the memory m odule as shown in Fig . 3 Fig. 3 Removi ng t he mem ory module 2. Remov e the memory m odule from its slot and put it aside. ...

  • Packard Bell H5 - page 7

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 7 Removing the Hard Disk Drive To remove the hard disk drive, first remo ve the battery (see Removing the Battery ) , then perform the following steps: 1. Remove the screw s as s how n in Fig. 4 Fig. 4 Screw retaining the HDD module 2. Carefully pull the H DD module out from the base unit as sh ...

  • Packard Bell H5 - page 8

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 8 Removing the CPU To remove the CPU first remove the battery (see Rem oving the B attery ) then perform the following st eps: 1. Unsc rew sc rews on C PU Heat S ink in desc ending or der (5 Æ 4 Æ 3 Æ 2 Æ 1) as shown in Fig. 6 Fig. 6 CPU Heat Sink Note: Beware of screws u se on the CPU heat ...

  • Packard Bell H5 - page 9

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 9 Removing the Keyboard To remove the Keyboard , first remove the battery (see Removing the Battery ), th en perform the following steps: 1. Release the keyboard from the base u nit by push K B lock with fl at screws driver a s shown in Fig. 8 Fig. 8 Releasing the keyboard cover 2. Lift up the ...

  • Packard Bell H5 - page 10

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 10 Removing the Optical Disk Drive To remove the ODD, first remove the battery (s ee Removing the Battery ) then perform the following st eps: 1. Flip ove r the unit, uns crew and pull the ODD mod u le out from the b ase unit as sh own in Fig. 10 Fig. 10 Pushing the optical drive out from the b ...

  • Packard Bell H5 - page 11

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 11 Removing the LCD Module To remove the LCD Module first remove the battery (see Removing the Battery ) and remove the Keyboard ( see Removing the Keyboard ) then perform the following steps : 1. Remove the hinge cove r as shown in Fig. 11 Fig. 11 Removing the hinge cover 2. Dis connect LC D c ...

  • Packard Bell H5 - page 12

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 12 3. Release two screws at both side of LCD hing e, remain two outer screws attached. Fig. 13 Removing screws at LCD hinge 4. Open up the LCD panel at 45 o then remove two outer screws on LCD hinge. Fig. 14 Removing outer screw at LCD hinge 5. Carefully separate the LCD Module from the base un ...

  • Packard Bell H5 - page 13

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 13 Removing the LCD Pane l To remove the LCD panel, first remove th e LCD module (see Removing the LCD Module ), then perform t he following st ep s: 1. Use a pin to remove the r ubber cover on the LCD module as shown in Fig. 15 2. Remove all screws as shown in Fig. 15 Fig. 15 Removing the rubb ...

  • Packard Bell H5 - page 14

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 14 3. Carefully release LCD Bezel form LCD module as shown in Fig. 16 Fig. 16 Removing the LCD Bezel 4. Release the inverter boa r d by remove the screw and disconnect all connectors as show n in Fig. 17 Fig. 17 Removing the Inverter Board M2x5 S ilver 1 2 2 ...

  • Packard Bell H5 - page 15

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 15 5. Release six screws at the side o f the LCD Penal and two screws on LCD Hinge. Fig. 18 Removing the LCD Pa nel h in ges 6. Carefully lif t up the LCD panel. 7. Remove the screws at both side s of the LCD panel in order to re lease the LCD hinges as shown in Fig. 19 Fig. 19 Removing the LCD ...

  • Packard Bell H5 - page 16

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 16 Removing the Bottom Cover To remove the Top Cover , first remove the battery (see Removing th e Battery ), remove the Optical Disk Drive (see Removing the Optical Disk Drive ) then perform the following steps: 1. Remove a ll s crews on the bottom of th e base unit as shown in Fig. 20 Fig. 2 ...

  • Packard Bell H5 - page 17

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 17 3. Carefully lif t up bottom co ver from base unit as shown in Fig. 22 and plac e it aside. Fig. 22 Lifting up the B ottom cover Removing the MDC Modem To remove the MDC Modem, first remove the Bottom Cover ( see Removing the Bottom Cover ) then perform t he following st ep s: 1. Relea se sc ...

  • Packard Bell H5 - page 18

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 18 Removing the Chipset Heat Sink To remove the Chipset heat sink, first remove the Bottom c over (see Removi ng the Bottom Cover ) then perform the following steps: 1. Unscrew the screws on the Chipset Heat sink in descending order (4 Æ 3 Æ 2 Æ 1) disconnect the fan connector as shown in Fi ...

  • Packard Bell H5 - page 19

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 19 Removing the Multi card reader To remove the Multi card reader, first remove the Hard Disk Drive (see Removing the Hard Disk Driver ) then perfo rm the fol lowing step s: 1. Unsc rew the screw s on the Multi Card Reader a nd disconn ec t it as show n in Fig. 25 Fig. 25 Multi card Reader 2. C ...

  • Packard Bell H5 - page 20

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 20 Removing the Main Board To remove the Main Board, first remove the Bottom cover (see Remov ing the Bottom Cover ) then perform t he following st ep s: 1. Remove the right hinge cover as shown in Fig. 26 Fig. 26 Re moving the right hinge cover 2. Disc onnect LCD cable as sh own in Fig. 27 Fig ...

  • Packard Bell H5 - page 21

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 21 3. Remove the Hex screws from th e VGA Port as shown in Fig. 28 Fig. 28 Ma in Board 4. Release Hex screws from VGA and Parallel Port Fig. 29 VGA & Parallel Port A = M2.5x6 Silver B = M2.5x9 Silver C = M2.5x19.5 Sil ver M2.5x10 Silver ...

  • Packard Bell H5 - page 22

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 22 5. Pull the plastics part near to aud io port outward to release Main Board and carefully lift up the Main Boa rd as show n in Fig. 30 Fig. 30 Lifting up Main Board ...

  • Packard Bell H5 - page 23

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 23 Removing the Top Shield To remove the Top Shield, fir st remove the Main Board ( see Removi ng the Ma in B oard ), then perform the following steps: 1. Remove screws on top cover as shown in Fig. 31 Fig. 3 1 Top Cover 2. Unscrew all screws and disconnect a ll cable on the Top Shield as sho w ...

  • Packard Bell H5 - page 24

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 24 4. Release the Switch Boar d and LED Board on Top Shield by remove four scr ews encircle in Fig. 33 Fig. 33 Switch Board and LED Board Removing the Touch Pad To remove the touch pad, firs t remove the top shield (see Removing the Top Shie ld ) then perform the following steps: 1. Unscrew the ...

  • Packard Bell H5 - page 25

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 25 Removing the Speaker Assembly To remove the Speaker Assembly, first re move the Main Board (see Remo ving the M ain Board ) then perform the following steps: 1. Remove the screws holding Speaker Assembly as shown in Fig. 36 Fig. 36 Speaker Assembly 2. Carefully remove the Speaker ass embly f ...

  • Packard Bell H5 - page 26

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 26 Screws M2.5x7 Black M2.5x5 Silver M2x3 Black M2.5x7 Silver M2x6 Silver M2x5 Silver M2x3.5 Silver M2x4 Silver M2x3 Silver M2.5x10 Silver M2.5x19.5 Silver M2.5x9 Silver ...

  • Packard Bell H5 - page 27

    NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 27 Notice The information in this guide is subject to chan ge without notice. This guide contains information pr otected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without pr ior written consent from NEC Computer s International BV. NEC COMP ...

Manufacturer Packard Bell Category Laptop

Documents that we receive from a manufacturer of a Packard Bell H5 can be divided into several groups. They are, among others:
- Packard Bell technical drawings
- H5 manuals
- Packard Bell product data sheets
- information booklets
- or energy labels Packard Bell H5
All of them are important, but the most important information from the point of view of use of the device are in the user manual Packard Bell H5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Packard Bell H5, service manual, brief instructions and user manuals Packard Bell H5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Packard Bell H5.

Similar manuals

A complete manual for the device Packard Bell H5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Packard Bell H5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Packard Bell H5.

A complete Packard Bell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Packard Bell H5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Packard Bell H5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Packard Bell H5, that we can find in the current document
3. Tips how to use the basic functions of the device Packard Bell H5 - which should help us in our first steps of using Packard Bell H5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Packard Bell H5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Packard Bell H5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Packard Bell H5?

Use the form below

If you did not solve your problem by using a manual Packard Bell H5, ask a question using the form below. If a user had a similar problem with Packard Bell H5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)