English dropdown-ico

Manual Tyco 9800

11 pages 0.25 mb
Download

Go to site of 11

Summary
  • Tyco 9800 - page 1

    Installation Instructions and User Guide for the Frostex Pipe Freeze Protection System Using the 9800 FlexFit Plug Kit Directives d’installation et Guide de l’Utilisateur du Système Frostex de Protection Anti-gel des T uyaux Utilisé avec le Kit Frostex 9800 FlexFit Keep pipes from freezing Protection anti-gel des tuyaux 60J9 Residential and M ...

  • Tyco 9800 - page 2

    Contents Five Important Safety Warnings 1 General Instructions 2 Installation Instructions 2 Periodic Inspections 8 T roubleshooting 8 Limited Warranty 9 Before Y ou Begin Make sure your 9800 FlexFit Plug Kit is complete. It should contain: 1 9800 FlexFit plug 1 Push-on end seal 2 Orange warning labels in English 2 Orange warning labels in French 1 ...

  • Tyco 9800 - page 3

    Five Important Safety Warnings Follow all five of these instructions to prevent fire or shock: 1. Use the correct heating cable. • Use only braided versions of Frostex heating cable. • Earlier versions of Frostex heating cable with no braid are not compatible. 2. Use the right end seal and plug. • Seal the heating cable only with the end seal ...

  • Tyco 9800 - page 4

    General Instructions • Observe the safety warnings on page 1. Follow the installation steps (pages 2–7) in the exact order given. • T o ensure the plug is properly connected, do not assemble at temperatures below 0°F (–18°C). • The Frostex system can be left plugged in all year , but you will save energy by unplugging the system when th ...

  • Tyco 9800 - page 5

    T able 2. Plastic Pipe Number of heating cable runs required 1C. Calculate the total length of heating cable required. Multiply the number of heating cable runs by your pipe length. Add one extra foot (30 cm) for each valve in your line. Add one extra foot (30 cm) for the distance to the power connection. For installations in a crock, add an additi ...

  • Tyco 9800 - page 6

    4 Step 2. Install the end seal. Note: The end seal can only be used once, so do not install it until step 2D. Heating Cable Construction Clear plastic wrap Black core (bus wires inside) Braid Blue jack et 2A. Prepare the heating cable. Cleanly cut off one end of the heating cable. 2C. Remove the plastic wrap. Cut and remove the clear plastic wrap. ...

  • Tyco 9800 - page 7

    5 Step 3. Install the 9800 FlexFit plug. Cable guide Ground contact Indicator post Back wall Cov er T E ST Indicator light Ground-fault unit Reset button T est button K eep d ry Ga rder a u s ec 3A. Prepare the cable. Cleanly cut off the end of the cable. Push back the braid 3/4" (2 cm) and then twist the end of the braid around the cable to e ...

  • Tyco 9800 - page 8

    Step 4. Attach the heating cable to the pipe. 4A. Prepare to install the heating cable. Begin the installation at the electrical outlet. Leave at least 1 foot (30 cm) of extra heating cable so the ground-fault unit can be secured to the outside of the thermal insulation, as shown in Figures 1 and 2. This will relieve any strain on the heating cable ...

  • Tyco 9800 - page 9

    Step 5. Install the insulation. Thermal insulation must be used. It protects the Frostex heat- ing cable from damage and helps keep the pipes from freezing. Before you insulate, be sure the Frostex heating cable is undamaged—no nicks or cuts—and the braid is intact. Replace the heating cable if necessary . 5A. Cover the system with the insulati ...

  • Tyco 9800 - page 10

    Periodic Inspections Each month • T est the 9800 FlexFit plug as described in Step 6B. Periodically Each time you plug in the system, and at least once a year , do the following: • Check the entire Frostex system for signs of damage. Inspect any exposed portion of the heating cable for evidence of cuts, nicks, abrasions, gnawing by animals, and ...

  • Tyco 9800 - page 11

    Limited Warranty T yco Thermal Controls warrants all Frostex self-regulating heating cables and compo- nents against faulty workmanship and use of defective materials for two (2) years from the date of purchase. This warranty can be amended only by a written instru- ment signed by a duly authorized officer of T yco Thermal Controls. Buyer's ex ...

Manufacturer Tyco Category Surge Protector

Documents that we receive from a manufacturer of a Tyco 9800 can be divided into several groups. They are, among others:
- Tyco technical drawings
- 9800 manuals
- Tyco product data sheets
- information booklets
- or energy labels Tyco 9800
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tyco 9800.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tyco 9800, service manual, brief instructions and user manuals Tyco 9800. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tyco 9800.

Similar manuals

A complete manual for the device Tyco 9800, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tyco 9800 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tyco 9800.

A complete Tyco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tyco 9800 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tyco 9800, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tyco 9800, that we can find in the current document
3. Tips how to use the basic functions of the device Tyco 9800 - which should help us in our first steps of using Tyco 9800
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tyco 9800
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tyco 9800 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tyco 9800?

Use the form below

If you did not solve your problem by using a manual Tyco 9800, ask a question using the form below. If a user had a similar problem with Tyco 9800 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)