English dropdown-ico

Manual Fishman SBT-C

12 pages 0.16 mb
Download

Go to site of 12

Summary
  • Fishman SBT-C - page 1

    USER GUIDE SBT ...

  • Fishman SBT-C - page 2

    2 Read Me F irst! Installation of this product is a straightforwar d pr ocedure, but we r ecommend this job only if you are an experienced r epair technician. Plugging In An impedance matching preamp is r ecommended, but not r equired. This will help realize the full fr equency r esponse potential of the pickup and allow for cable runs longer than ...

  • Fishman SBT-C - page 3

    3 Installing the Model SBT -C Parts • SBT -C Pickup with 1 ⁄ 8 ” Shielded Jack • (3) Double-sided Adhesive Pads • Adhesive-backed Jack Holder • Felt-covered Strain Relief Clip • 10’ Instrument Cable 1.5” 1.5” ...

  • Fishman SBT-C - page 4

    4 Preparation The model SBT -C may be mounted onto a classical guitar , a steel string guitar , a dulcimer and similar stringed instruments. The installation may be performed either on the outside of the instrument or inside the soundhole where the transducer will be out of harm’ s way . In instruments with small soundholes (dulcimers, for exampl ...

  • Fishman SBT-C - page 5

    5 below the highest pitched string noting the position where these two measur e- ments meet. This will serve as a test location. 2. Apply an adhesive pad to the shiny brass face of the transducer and mount at the location indicated in step 1. The transducer wire should follow the grain of the soundboard and point towar d the soundhole of the instru ...

  • Fishman SBT-C - page 6

    6 adjacent to the soundhole. 5. Insert the jack into the jack holder and plug the instrument cable into the jack. 6. Attach the felt-covered strain r elief clip to the soundhole. Note: The felt-covered clip can be bent to accommodate dif fer ent soundhole thicknesses. ...

  • Fishman SBT-C - page 7

    7 Installing the Model SBT -E Follow the same procedur e as the Model SBT -C on page 3 to mount the pickup element. Parts: • SBT -E Pickup • ¼” Fishman Switchjack stereo endpin jack • (3) Double-sided Adhesive Pads ...

  • Fishman SBT-C - page 8

    8 Install the pickup 1. Widen the endpin hole to 15/32” (11.9mm) to accommodate the endpin jack. For additional information, please refer to the Switchjack Installation Guide located at fi shman.com. 2. Solder the pickup “hot” wire to the Tip terminal, which is the shortest of the three tabs. Solder the pickup shield to the Gr ound tab on th ...

  • Fishman SBT-C - page 9

    9 Installing the Model SBT -HP The Model SBT -HP is designed for harp or piano. Parts • SBT -HP with 42” Cord and ¼” Jack • (3) Double-sided Adhesive Pads • Adhesive-backed Jack Holder As a general rule, the transducer should be mounted over a freely vibrating location and not over a “dead” structural brace. The exact location for be ...

  • Fishman SBT-C - page 10

    10 2. Apply an adhesive pad to the shiny brass face of the transducer and mount outside the instrument, at the location indicated in step 1. The transducer wire should follow the grain of the soundboard and point towar d the bottom of the instrument. 3. Plug the pickup into an amplifi er and experiment with the vertical location of the transducer ...

  • Fishman SBT-C - page 11

    11 F or piano mounting The SBT -HP should be mounted to the piano soundboard at a location adjacent to the higher strings. For example, on a grand piano the transducer should be placed directly on the soundboar d within the third-largest ranges of the piano. For additional instructions, see the above information for harp mounting. ...

  • Fishman SBT-C - page 12

    www .fi shman.com 009-030-001 Rev D 5-10 ...

Manufacturer Fishman Category Music Pedal

Documents that we receive from a manufacturer of a Fishman SBT-C can be divided into several groups. They are, among others:
- Fishman technical drawings
- SBT-C manuals
- Fishman product data sheets
- information booklets
- or energy labels Fishman SBT-C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fishman SBT-C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fishman SBT-C, service manual, brief instructions and user manuals Fishman SBT-C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fishman SBT-C.

Similar manuals

A complete manual for the device Fishman SBT-C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fishman SBT-C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fishman SBT-C.

A complete Fishman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fishman SBT-C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fishman SBT-C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fishman SBT-C, that we can find in the current document
3. Tips how to use the basic functions of the device Fishman SBT-C - which should help us in our first steps of using Fishman SBT-C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fishman SBT-C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fishman SBT-C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fishman SBT-C?

Use the form below

If you did not solve your problem by using a manual Fishman SBT-C, ask a question using the form below. If a user had a similar problem with Fishman SBT-C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)