Manual AEG SKD71800F0

20 pages 0.82 mb
Download

Go to site of 20

Summary
  • AEG SKD71800F0 - page 1

    SKD71800F0 EN REFRIGERATO R USER MANUAL ...

  • AEG SKD71800F0 - page 2

    FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the A ...

  • AEG SKD71800F0 - page 3

    CONTENTS 4 Safety information 6 Control panel 10 First use 10 Daily use 11 Helpful hints and tips 12 Care and Cleaning 13 What to do if… 15 Technical data 16 Installation 17 Noises 19 Environmental concerns The following symbols are used in this user manual : Important information concerning your personal safety and information on how to avoid da ...

  • AEG SKD71800F0 - page 4

    SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation ...

  • AEG SKD71800F0 - page 5

    – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short - circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or q ...

  • AEG SKD71800F0 - page 6

    • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. • Adequate air circulation should be around the appliance, lacki ng this leads to overheat- ing. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible the back of the ...

  • AEG SKD71800F0 - page 7

    Display 7 8 5 6 4 3 2 1 1 Timer function 2 DYNAMICAIR function 3 Minute Minder function 4 Child Lock function 5 Alarm indicator 6 Temperature indicator 7 Holiday function 8 COOLMATIC function Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the ON/OFF button if the display is off. 3. Th ...

  • AEG SKD71800F0 - page 8

    DYNAMICAIR function To switch on the function: 1. Press the Mode button until the corresponding icon appears. The DYNAMICAIR indicator flashes. 2. Press the OK button to confirm. The DYNAMICAIR indicator is shown. To switch off the function: 1. Press the Mode button until the DYNAMICAIR indicator flashes. 2. Press the OK button to confirm. 3. The D ...

  • AEG SKD71800F0 - page 9

    3. Press the OK button to confirm. The Child Lock indicator is shown. To switch off the function: 1. Press the Mode button until the Child Lock indicator flashes . 2. Press the OK button to confirm. 3. The Child Lock indicator goes off. COOLMATIC functi on If you need to insert a large amount of warm food, for example after doing the grocery shoppi ...

  • AEG SKD71800F0 - page 10

    Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. The door open alar m conditions are indicated by: • flashing Alarm indicator • acoustic buzzer When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing any button. FIRST USE Cleanin ...

  • AEG SKD71800F0 - page 11

    Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. For better use of space, the fro nt half - shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at dif- ferent heights ...

  • AEG SKD71800F0 - page 12

    warmer settings to allow automatic defrosting and so a saving in electricity consump- tion. Hints for fresh food refrigerat ion To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour • position food so that air can circulate freel ...

  • AEG SKD71800F0 - page 13

    Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little wa shing - up liquid added. After cleaning, reconnect the equipment to the mains supply. Defrosting of the ref ...

  • AEG SKD71800F0 - page 14

    Problem Possible cause Solution The appliance is noisy The appliance is not supported properly Check if the appliance stands sta- ble (all the four feet should be on the floor) The appliance does not operate. The lamp does not operate. The appliance is switch ed off. Switch on the appliance. The mains plug is not connected to the mains socket corre ...

  • AEG SKD71800F0 - page 15

    Problem Possible cause Solution Many products are st ored at the same time. Store less products at the same time. The temperatur e in the refrigerator is too high. There is no cold air circul ation in the appliance. Make sure that there is cold a ir circulation in the appliance. Upper or lower square is shown in th e temper ature Display. An error ...

  • AEG SKD71800F0 - page 16

    INSTALLATION Positioning WARNING! If you are discarding an old appliance that has a lock or catch on the door, you must ensure that it is made unusable to prevent young children being trapped inside. The appliance shall have the plug accessible after installation. Install this appliance at a location where the ambient temperature correspo nds to th ...

  • AEG SKD71800F0 - page 17

    1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neu tral As the colours of the wires in the mains lead of this appliance may not cor respond with the coloured markings identifying the terminals in your plug, proceed as follo ws: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbo ...

  • AEG SKD71800F0 - page 18

    BRRR! HISSS! CLICK! BLUBB! CRACK! SSSRRR! OK CLICK! CLICK! BRRR! BRRR! BLUBB! BLUBB! 18 Noises ...

  • AEG SKD71800F0 - page 19

    HISSS! HISSS! SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly ...

  • AEG SKD71800F0 - page 20

    www.aeg.com/shop 222337848 - A - 092011 ...

Manufacturer AEG Category Refrigerator

Documents that we receive from a manufacturer of a AEG SKD71800F0 can be divided into several groups. They are, among others:
- AEG technical drawings
- SKD71800F0 manuals
- AEG product data sheets
- information booklets
- or energy labels AEG SKD71800F0
All of them are important, but the most important information from the point of view of use of the device are in the user manual AEG SKD71800F0.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AEG SKD71800F0, service manual, brief instructions and user manuals AEG SKD71800F0. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AEG SKD71800F0.

Similar manuals

A complete manual for the device AEG SKD71800F0, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AEG SKD71800F0 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AEG SKD71800F0.

A complete AEG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AEG SKD71800F0 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AEG SKD71800F0, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AEG SKD71800F0, that we can find in the current document
3. Tips how to use the basic functions of the device AEG SKD71800F0 - which should help us in our first steps of using AEG SKD71800F0
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AEG SKD71800F0
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AEG SKD71800F0 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AEG SKD71800F0?

Use the form below

If you did not solve your problem by using a manual AEG SKD71800F0, ask a question using the form below. If a user had a similar problem with AEG SKD71800F0 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)