English dropdown-ico

Manual Clover Electronics CDR 4170

67 pages 2.76 mb
Download

Go to site of 67

Summary
  • Clover Electronics CDR 4170 - page 1

    INSTRUCTION MANUAL ST ANDALONE 4CH DVR DIGIT AL VIDEO RECORDER MODEL: CDR 4170 POWER FULL ALARM TIMER PLAY REC CH1 CH2 CH4 CH3 POP PIP QUAD ENTER AUTO PLAY FF REW STOP SEARCH SYS LOG SETUP WTMK BACKUP PTZ ALRST REC PAUSE ESC OSD Copyright © 2006 Clover Electronics U.S. A. All Rights Reserved. ...

  • Clover Electronics CDR 4170 - page 2

    CAUTION RISK OF ELEC TRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEA BLE PA RTS INSIDE. REFER SERVICING T O QUAL IFIED SERVICE PERSONNEL. Explanation of two Symbols The lightning flash with arrowhead symbol, within an equilate ral triangle, is intended to alert the use r to the ...

  • Clover Electronics CDR 4170 - page 3

    NOTE : This equipment has been certified and found to com p ly with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide r easonable protectio n against interference and will not cause interference with other ap pliance usage. However, it is imperative that user follows this manual's guidelines to avoid improper usage ...

  • Clover Electronics CDR 4170 - page 4

    CONTENTS 1 . G E N E R A L P R E C A U T I O N S 1 2. SPECIFICATIONS 3 3 . O P E R A T I O N 5 3 . 1 F R O N T P A N E L 5 3.2 BACK PANEL 9 4. BASIC CONFIGURATION OF THE MONITOR SCREEN 10 4 . 1 S T A R T U P 1 0 4 . 2 L I V E S C R E E N 1 1 4 . 3 R E C O R D I N G S C R E E N 1 2 4 . 4 P L A Y B A C K S C R E E N 1 3 4.5 RECORD AND PLAYBACK SC REE ...

  • Clover Electronics CDR 4170 - page 5

    8 . I N S T A L L A T I O N 4 0 8.1 SYSTEM CONFIG URATION DIAGRAM 40 8 . 2 C A M E R A 4 1 8.3 AUDIO 41 8 . 4 M O N I T O R 4 2 9 . N E T W O R K I N G 4 3 9 . 1 R E Q U I R E M E N T S 4 3 9.2 INSTALLING THE PROGRAM TO THE PC 43 9.3 CONNECTING THE DVR TH ROUGH GUI (CLDVR) 44 9 . 4 C L D V R S C R E E N 4 5 9.5 EXPLANATION OF CLDVR FUNCTION 46 9 . ...

  • Clover Electronics CDR 4170 - page 6

    1. GENERAL PRECAUTIONS 1. Read Ins tructions: All of the safety and operating instruction s should be read and understood before the product is u sed. 2. Retain Instru ctions: The safety and operating in structions should be retained for future reference. 3. Heed Warnings: All warnings on the product and the instruction m anual should be followed. ...

  • Clover Electronics CDR 4170 - page 7

    result in damage and will often require e xtensive work by a qualified service technician to restore the product to its normal operation e. If the product has been dropped or the cabinet has been damaged f. When the product displays a distinct change in performance - this i ndicates a need for service 17. Replacement Parts: Whe n replacement parts ...

  • Clover Electronics CDR 4170 - page 8

    2. SPECIFICATIONS DVR SPECIFICATIONS System NTSC or PAL (Auto Detection) Video Input 4 Inputs (BNC): 1Vp-p composite, 75 ohms Video Output 2 Outputs (BNC), 4 Looping output (BNC): 1Vp-p composite, 75 ohms Audio Input 1 Channel (RCA) Audio Output 1 Channel (RCA) Alarm Input 4 Ch alarm Inputs: Normally Open (N.O) Alarm Output 1 Ch alarm Output: Norma ...

  • Clover Electronics CDR 4170 - page 9

    Backup JPEG & AVI File format through GUI, DVR File format at USB. Ethernet RJ-45 Connector for netwo rk communication PAN / TILT RS-4 85 Control (Pelco D Protocol) USB Port Data Backup, Firmware Update Jog-Shuttle YES Setup On screen Display setup User Interface Menu driven User Input Device Front Panel keypad Timer Built-in real time clock De ...

  • Clover Electronics CDR 4170 - page 10

    3. OPERATION 3.1 FRONT PANEL 1. HDD RACK Master HDD : Installed 160G B 2. CH 1 / LEFT - While in Quad mode, press thi s button momentarily (at least 3 seconds) and channel 1 will appear i n full screen. - In full screen mode, channel 1 single screen o r on PIP / POP / QUAD screen, press this button once and the screen will freeze. Press this button ...

  • Clover Electronics CDR 4170 - page 11

    4. CH 3 /DOWN - While in Quad mode, p ress this button momentarily (at least 3 seconds) and channel 3 will appear i n full screen. - In full screen mode, channel 3 single screen o r on PIP / POP / QUAD screen, press this button once and the screen will freeze. Press this button again to release the frozen picture . - On Playback mode, pressing this ...

  • Clover Electronics CDR 4170 - page 12

    10. LED FUNCTION - REC : The LED wil l blink when the system is in the recording mode. - PLA Y : The LED will blink when t he syste m is in the replaying mode. - TIMER : When the SCHEDULE RECORD is se t, the LED will blink before it start s RECORDING . - ALARM : The LED is lit when ALARM is set. - HDD FULL : The LED is l it when the space of HDD is ...

  • Clover Electronics CDR 4170 - page 13

    WATERMARK CHEC K - Press and hol d this button for about 3 seconds in the playback mode, the Water Mark OSD will be shown on the sc reen. To exit, press and hold this button again for about 3 secon ds. - The WTMK function : Watermarking is an identification code or bit pattern integrated into the multimedia data to aid copyright o w ners to identif ...

  • Clover Electronics CDR 4170 - page 14

    3.2 BACK PANEL 1 2 3 4 5 6 7 8 CH1 CH2 CH3 CH4 LOOP OUT VIDEO I N V - OUT1 A - IN A - OUT ETHERNET ALARM IN 12 34 GND + _ ALARM OUT AC INPUT AC100-240V,50/60Hz POWER ATTENTION CAUTION RISQUE DE CH OC ELECTROIQUE NE PAS ENLEVER DO NOT OPEN RISK OF ELECTRONIC SHO CK RS485 V - OUT2 M ODEL NO : CDR4170 AC100-240V,50/60Hz, 25W CLOVER ELECTRONICS 13073 E ...

  • Clover Electronics CDR 4170 - page 15

    4. BASIC CONFIGURATION OF THE MONITOR SCREEN 4.1 START UP When the system starts up, the following pictures will be displayed in se quence. Firmware version # Hard Drive information. Operational information Function T itle Network Configuration - 10 - ...

  • Clover Electronics CDR 4170 - page 16

    4.2 LIVE SCREEN Camera Title Time and Date Full Screen in Live Mode Quad Screen in Live Mode Camera Title Indicates recordin g HDD Time and Date Indicates recordin g HDD Camera Ti tle Indicates recordin g HDD Time and Date PIP Screen in Live Mode - 1 1 - ...

  • Clover Electronics CDR 4170 - page 17

    Indicates recordin g HDD Time and Date Camera Title POP Screen in Live Mode 4.3 RECORDING SCREEN Recording OSD Camera Ti tle Indicates recordin g HDD Time and Date Quad Screen in Record Mode - 12 - ...

  • Clover Electronics CDR 4170 - page 18

    4.4 PLA YBACK SCREEN Playback OSD & Speed Time and Date Camera Title Indicates recordin g HDD Playback OSD & Speed Time and Date Camera Title Indicates recording HDD Full Screen in Playback Mode Playback OSD & Speed Camera Title in Pla y back mode Camera Title Time and Date Nine Screens in Playback Mode Indicates recordin g HDD Quad Scr ...

  • Clover Electronics CDR 4170 - page 19

    4.5 RECORD AND PLA YBACK SCREEN REC, Playback OSD & Spee d Time and Date Camera Title Indicates recordin g HDD Nine Screens in Record and Play bac k Mode Quad Screen in Record and Play bac k Mode REC, Playback OSD & Spee d Time and Date Camera Title Camera Title Indicates recording HDD - 14 - ...

  • Clover Electronics CDR 4170 - page 20

    4.6 LIVE Live means viewing the present video image s from the cameras on the monitor. 4.6.1 Full Screen display Full screen display is possible in the Live mode o r Record mode. Use channel selection button to choose a corre sponding video input. Refer to 4.2 “Full Screen in LIVE Mode” 4.6.2 Quad Screen All 4 cameras are viewed on the monitor ...

  • Clover Electronics CDR 4170 - page 21

    - Press the same channel sele ction button to release the freeze function. Freeze symbol 4.6.7 OSD On / Off Available in the LIVE, RECORD or PLAYBACK mode. When the OSD button is pressed, all the te xts except the REC and PB (PLAYBACK) OSD are cleared temporarily. When the button is pres sed again while OSD is in OFF position, the system status wil ...

  • Clover Electronics CDR 4170 - page 22

    The whole recording lists a re updated hourly up to 1,000 lists on both Master and Slave. 4.7.3 Schedule recording Recording by schedul ed time The time of record start and finish can be set to hour: minute. Refer to section 5.7.6 for more informa tion. 4.7.4 ALARM recording When an alarm signal is received, the sy stem begins to record automatical ...

  • Clover Electronics CDR 4170 - page 23

    4.8.3 Playback by the last recording list When the SEARCH button is pressed, the SEARCH/HDD SET menu appears on the screen. Select THE LAST RECORD LIST and press the ENTER button. It will replay from the beginning of the last recorded list. Press the ESC button to return to the SEARCH/HDD SET menu. In order to pause d uring playing, press the PLA Y ...

  • Clover Electronics CDR 4170 - page 24

    Set the TIME/DA TE by using the UP/DOWN buttons for changing the values an d use the LEFT/RIGHT buttons to move to next field. Press the ENTER button to search the recorded image. If the recorded image exist s, it automatically plays data an d if not, it returns to the LIVE mode. In order to pause d uring playing, press the PLA Y button. And to kee ...

  • Clover Electronics CDR 4170 - page 25

    5. SETUP 5.1 SETUP SCREEN TREE - 20 - ...

  • Clover Electronics CDR 4170 - page 26

    - 21 - ...

  • Clover Electronics CDR 4170 - page 27

    - 22 - ...

  • Clover Electronics CDR 4170 - page 28

    5.2 HOW TO SET UP - Setup is possible in the LIVE mode and partly in the recording mode, not in the playback mode. - Press the SETUP button. - Choose a setup item by using the UP/DOWN buttons and press the ENTER button. - Choose the desired values with the ENTER button. - Press the ESC button to exit. 5.3 ALARM - Choose the ALARM in the MAIN SETUP ...

  • Clover Electronics CDR 4170 - page 29

    5.3.6 REC SPEED • Choose the REC SPEED in the ALARM OPTION menu by using the UP/DOWN buttons. • Choose one REC SPEED among 01, 02, 03, 05, 10, 15, 30 and 60 IPS by repeatedly pressing the ENTER button, if the REC RESOLUTIO N in the R ECORD menu set to 720H or 360H. It will be fixed to 120 IPS if the REC RESOLUTION in the RECOR D menu se t to CI ...

  • Clover Electronics CDR 4170 - page 30

    5.4.4 AREA • Choose the AREA in the MOT ION menu with the UP/DOWN buttons • Press the ENTER button to create the motion detection AREA . • Move the symbol “ O ” by using the UP / DOWN / LEFT / RIGHT buttons and select the area where you wo uld like to create, and press the ENTER button. • T o release the motion detection area, press the ...

  • Clover Electronics CDR 4170 - page 31

    • T o apply the setting, press the ENTER button. 5.5.1.3 DATE FORMAT • Choose the DA TE FORMA T in the TIME /DA TE SET menu with the UP/DOWN buttons. • Select the DA TE FORMA T by pressing the ENTER button. There are three format s to display the time and date as follows. MM / DD / YYYY : Fo r U. S. A . YYYY / MM / DD: F or Asian Countries. D ...

  • Clover Electronics CDR 4170 - page 32

    by using the LEFT / RIGHT / ENTER butt on, it starts to formatting or select NO for going back to the previous mode. 5.5.2.3 HDD INFO • Choose the HDD INFO in the HARD DISK menu by using UP/DOWN buttons. • Select BYTE , PERCENT AGE or OFF by pressing the ENTER button. • Press the ESC button to exit. BYTE: Indicates the remaining space of HDD ...

  • Clover Electronics CDR 4170 - page 33

    5.5.6.1 IP MODE • Choose the IP MODE in the IP CONFIGURA TION menu with the UP/DOWN buttons. • Choose DYNAMIC IP or ST A TIC IP by pressing the ENTER button. DYNAMIC IP : The IP is automatically allocated via router . The refore the IP address, subnet mask and gateway address will be auto matically allocated. ST A TIC IP : This has to be set wh ...

  • Clover Electronics CDR 4170 - page 34

    5.5.6.6 MAC ID The MAC ADDRESS was consigned to each DVR at the factory . 5.5.7 NETWORK PERFORMANCE • Choose the NETWORK PERFO RMANCE in the SYSTEM menu with the UP/DOWN buttons. • Press the ENTER button and the NETWORK PERFORMA NCE window will be displayed. • Choose a bandwid th among 0.4 , 1 , 2 , 4 , 8 mbps (Mega Bit Per Second) and MAX by ...

  • Clover Electronics CDR 4170 - page 35

    5.6.2 DWELL TIME • Choose the DWELL TIME in the VIDEO menu with the UP/DOWN buttons. • Press the ENTER button, and the DWELL TIME menu will be displayed. • Select the desired channel by using UP/DOWN buttons and press the ENTER button to change the dwell time of the desired channel. • After changin g the values, press the ENTER button. NOTE ...

  • Clover Electronics CDR 4170 - page 36

    5.7.5 AUDIO REC • Choose the AUDIO REC in the RECORD menu by using UP/DOWN buttons. • Select ON or OFF by pre ssing the ENTER button. 5.7.6 SCHEDULE REC • Choose the SCHEDULE REC in the RE CORD menu by using UP/DOWN buttons. • Press the ENTER button and the SCHEDULE RECORD SET menu will be displayed. 5.7.6.1 SCHEDULE REC • Choose the SCHE ...

  • Clover Electronics CDR 4170 - page 37

    At “ON” mode, the borderline will be shown on the screen. 5.8.3 TIME/DA TE • Choose the TIME/DA TE in the DISPLAY menu by using UP/DOWN buttons. • Select ON or OFF by pre ssing the ENTER button. At “ON” mode, the time/dat e will be shown on the screen. 5.8.4 POSITION • Choose the POSITION in the DISPLAY menu by using UP/DOW N buttons. ...

  • Clover Electronics CDR 4170 - page 38

    5.10.1.1 PASSWORD • Select the P ASSWORD in the DVR ACCOUNT menu by using UP/DOWN buttons. • Select ON or OFF by using the ENTER button. • If ON is selected, the password has to be entere d to get into the following mode. Setup mode, Search mode, Record mo de, Record stop mode, PTZ mode and System Log mode. • The p assword must be 8 digits. ...

  • Clover Electronics CDR 4170 - page 39

    • Press the ENTER button and the NETWORK ACC OUNT menu will be displayed. 5.10.2.1 USER ID • Select the USER ID in the NETWORK ACCOUNT menu by using UP/DOWN buttons. • Press the ENTER button. • Change the values up to 5 digit s with the UP/DOWN buttons and move the digits with the LEFT/RIGHT button. • Press the ENTER button to save the va ...

  • Clover Electronics CDR 4170 - page 40

    5.1 1.2 HOST NAME • Choose the HOST NAME in the DDNS SET menu with the UP/DOWN buttons. • Press the ENTER button to change the values with the UP/DOWN buttons and select the digits (up to 8 digit s) by using the LEFT/RIGHT buttons. • After changin g the values, press the ENTER button. 5.1 1.3 USER NAME • Choose the USER NAME in the DDNS SET ...

  • Clover Electronics CDR 4170 - page 41

    10. T o complete, click Add Host on the bottom. 11. After registration, go to the DDNS SET menu on the DVR. 12. Refer to section 5.1 1 DDNS in this manual for the next step. Registration to CLOVERDVR.COM 1. Go to website www .c loverdvr .c om 2. Select Insert New User . 3. Enter your ID and Password (up to 8 digit s), and press Submit. 4. New ID wi ...

  • Clover Electronics CDR 4170 - page 42

    4. Attach the HDD to the removable HDD ra ck and se cure it with the supplied screws as below . 5. Assemble and put the removable HDD ra ck back in it’s place. 6. T urn the power on and see if the HDD is bei ng recognized. 6.2 INST ALL THE HDD2 The HDD2 (SLA VE) can be inst alled inside of the system. The power switch must be turned of f and unpl ...

  • Clover Electronics CDR 4170 - page 43

    HDD2 A TT ACHING POINT 4. Secure the HDD with the supplied screws as below . 5. Connect the power connector a nd the flat cable to the HDD. 6. Reassemble the cover . 7. T urn the power on and see if the HDD is bei ng recognized. NOTE Be sure that the jumper setting is correct. If not, the system will not recognize the additional HDD (SLA VE). FIX S ...

  • Clover Electronics CDR 4170 - page 44

    7. PTZ CONTROL 1. Connect Pan/T ilt/Zoom camera’ s control to RS 485(+) / RS485(-) port on the rear of the system. 2. The video output of Pan /Tilt/Zoom camera to the o ne out of channel you wish to connect. 3. Press and hold the PTZ button for about 3 se conds on the front panel and the P AN/TIL T CONTROL screen will be displayed on the monitor ...

  • Clover Electronics CDR 4170 - page 45

    8. INST ALLA TION 8.1 System Co nfiguration Diagram The following illustration is showin g the fully inst alled system. CH1 CH2 CH3 CH4 LOOP OUT VIDEO IN V - OUT 1 A - IN A - OUT ETHERNET ALARM IN 12 34 GND + _ ALARM OUT AC INPUT AC100-240V,50 /60Hz POWER ATTENTION CAUTION RISQUE DE CHOC ELECTROIQUE NE PAS ENLEVER DO NOT OPEN RISK OF ELECTRON I C S ...

  • Clover Electronics CDR 4170 - page 46

    8.2 CAMERA This product can be inst alled up to 4 cameras. Connect cameras to the VIDEO IN (BNC) on the back panel of the product. T o connect a PTZ camera, conne ct the PTZ camera’s control line to the RS-485 (+, -) termi nal and connect the video output to one out of VIDEO IN on the back p anel of the product. CH1 CH2 CH3 CH4 LOOP OUT VIDEO IN ...

  • Clover Electronics CDR 4170 - page 47

    CH1 CH2 CH3 CH4 LOOP OUT VIDEO IN V - OUT 1 A - IN A - OUT ETHERNET ALARM IN 12 34 GND + _ ALARM OUT AC INPUT AC100-240V,50 /60Hz POWER ATTENTION CAUTION RISQUE DE CHOC ELECTROIQUE NE PAS ENLEVER DO NOT OPEN RISK OF ELECTRONIC SHOCK RS485 V - OUT2 M ODEL NO : CDR4170 AC100-240V,50/60Hz, 25W CLOVER ELECTRONICS 13073 EAST 166TH STREET, CERRITOS, CA 9 ...

  • Clover Electronics CDR 4170 - page 48

    TIME LAPS VCR CH1 CH2 CH3 CH4 LOOP OUT VIDEO IN V - OUT 1 A - IN A - OUT ETHERNET ALARM IN 12 34 GND + _ ALARM OUT AC INPUT AC100-240V,50 /60Hz POWER ATTENTION CAUTION RISQUE DE CHOC ELECTROIQUE NE PAS ENLEVER DO NOT OPEN RISK OF ELECTRONIC SHOCK RS485 V - OUT2 M ODEL NO : CDR4170 AC100-240V,50/60Hz, 25W CLOVER ELECTRONICS 13073 EAST 166TH STREET, ...

  • Clover Electronics CDR 4170 - page 49

    How to install the client program (CLDVR) 1. Start the operating s ystem (Windows 98/2000/X P). 2. Insert the program C D into CD-ROM d rive. 3. Open My Computer , and then select CD-ROM drive. 4. Selec t the CLDVR folder, and then double click SetupCLDVR .EXE . The software installation will begin. 5. After the installation h as been completed, th ...

  • Clover Electronics CDR 4170 - page 50

    The following CONFIG screen will be shown. • Enter the IP/URL , Port number (default: 5700) and ID (default: admin), which must be the same as for DVR. NOTE: ■ If the registered Host Name is CL OVER1 1 at www .dyndns.org , enter clover1 1.dyndns.org in IP/URL. ■ If the registered ID is CLOVER1 1 at www .cloverdvr .com , enter clover1 1.clover ...

  • Clover Electronics CDR 4170 - page 51

    1 2 3 4 2 clover.cloverdvr .com 1. CONNEC TION STATUS IND ICATOR It indicates that is curren tly being connected IP address and b andwidth (transmission speed). 2. FUNCTION OF BUTTONS Refer to next section. 3. LED DISPLAY, CLOCK The LED is lit depends on mode such as LIVE , PLAYBACK and RECOR D. And the clock indicates the present time. 4. PTZ CONT ...

  • Clover Electronics CDR 4170 - page 52

    1. F/W (FIRMWARE) The FIRMWARE can be up graded by pressing the F/W button or USB device. This button is not for users, only for manufacture rs and distribution center . 2. SAVE • Click the SAVE button to save the video images that is cu rrently being displayed on the GUI. • The following pop-up window will appear. • Click YES . • While sav ...

  • Clover Electronics CDR 4170 - page 53

    a d m i n 4 1 3 2 1. Select the HDD (Master or Slave) 2. Select 1 out of the lists for setting up the B ackup Start Time . 3. Setup the B ackup End Time and click on blank box. If the End Time is not selected, the BACKUP continues until the Playback automatically ends. 4. Click the Play&Backup button, and data will be saved on the BACKUP folder ...

  • Clover Electronics CDR 4170 - page 54

    Select Channel Reset button 7. PRINT • Click the PRINT button to print the current pictures shown on the GUI and then the following window pops up along with “ WAIT …” . Please wait a couple of second s until the system loa ds data to print. 8. REC • Click the REC button to start or stop reco rding. User can switch ON or OFF recording fro ...

  • Clover Electronics CDR 4170 - page 55

    10. QUAD BUTTON • Click the Quad button to dis play the quadrant pictures. 11. AUTO BUTTON • The GUI will be viewed a f ull screen at a time in a continuous sequence (one camera after another) by click ing this button. • The dwell time can be s et from 1 to 10 seconds in the SET UP menu on the GUI . • The sequencing order: CH 1->CH2-> ...

  • Clover Electronics CDR 4170 - page 56

    on the window and press t he Update REC.Quality button to save them. • Installed HDD and Recording HDD: Shows currently installed HDD info rmation such as connection information, whole capa city and used space. It shows currently being recorded HDD as well. Do not change the re cording HDD as possible as you can. • Water Mark ( on the GUI ): Th ...

  • Clover Electronics CDR 4170 - page 57

    1. Select HDD (Master/Slave) you wish to search. 2. Choose one of recordi ng lists, which are updated hourly up to 1,000 lists on both Master and Slave. 3. Click the Play button to replay the selected list, or double click the selected list to replay. 4. T o stop replaying, press the ST OP button. • Event REC Lists Select the Event REC Lists on t ...

  • Clover Electronics CDR 4170 - page 58

    16. REW • Press this button to rewind the recorded images. • The speed will be increa sed up to x16 speed when you keep clicking this button . • The speed is shown below the buttons. 17. PLAY Press this button to replay from the begi nning of the first recording list on HDD. 18. STOP Press this button to stop replaying. 19. PAUSE Press this b ...

  • Clover Electronics CDR 4170 - page 59

    9.5.2 PTZ CONTROL The following picture enable s you to control PTZ camera connect ed to the system . ZOOM control P A N control FOCUS control TIL T control PAN/TILT CONTROL Press UP key for TILT UP , DOWN key for TILT DOWN , LEFT key for PAN LEFT and RIGHT key for PAN RIGHT . FOCUS/ZOOM CONTROL Press “ Z+” key for ZOOM IN , “Z-“ key for ZO ...

  • Clover Electronics CDR 4170 - page 60

    3. Click in the box of WATER MARK to put WATER MARK while repla ying (See s ection 9.5.1 #14 setup for more details). 4. Select TV system between NT SC and PAL dependi ng on the broad casting system in your country ( NTSC in USA ). 5. You can see a channel in full screen by choosing o ne among 1 , 2 , 3 and 4 , and the quadrant pictures by clic kin ...

  • Clover Electronics CDR 4170 - page 61

    APPENDIX 1. RECORDING TIME TABLE (DAYS) 1.1 REC RESOLUTION (720H ) / REC QUALITY (VERY HIGH) SPEED 40G HDD 80G HDD 120G HDD 200G HDD 01 IPS 15-Days 19-Hours 31-Days 12-Hou rs 47-Days 07-Hours 78-Days 19-Hours 02 IPS 7-Days 22-Hours 15-Days 19-Hou rs 23-Days 17-Hours 39-Days 12-Hours 03 IPS 5-Days 07-Hours 10-Days 12-Hou rs 15-Days 19-Hours 26-Days ...

  • Clover Electronics CDR 4170 - page 62

    30 IPS 1-Days 00-Hours 2-Days 00-H ours 2-Days 22-Hours 4-Days 22-Hours 60 IPS 12-Hours 1-Days 00-Hours 1-Days 12-Hours 2-Days 12-Hours 1.5 REC RESOLUTION (360H ) / REC QUALITY (VERY HIGH) SPEED 40G HDD 80G HDD 120G HDD 200G HDD 01 IPS 24-Days 22-Hours 49-Days 19-Hou rs 74-Days 14-Hours 124-Days 09-Hours 02 IPS 12-Days 09-Hours 24-Days 22-Hou rs 37 ...

  • Clover Electronics CDR 4170 - page 63

    10 IPS 4-Days 17-Hours 9-Days 09-Hour s 14-Days 02-Hours 23-Days 09-Hours 15 IPS 3-Days 02-Hours 6-Days 07-H ours 9-Days 09-Hours 15-Days 14-Hou rs 30 IPS 1-Days 14-Hours 3-Days 02-H ours 4-Days 17-Hours 7-Days 19-Hours 60 IPS 19-Hours 1-Days 12-Hours 2-Days 07-Hours 3-Days 22-Hours 1.9 REC RESOLUTION (CIF) / REC SPEED (120 IPS) QUALITY 40G HDD 80G ...

  • Clover Electronics CDR 4170 - page 64

    [1-2] TIME : T ime does not get initialization . [1-3] DA TE FORM : MM/DD/YYYY [1-4] DA TE : Date does not get initialization. [2] HARD DISK [2- 1] HDD1 : Shows information on HDD that is connected to HDD1. [2- 2] HDD1 : Shows information on HDD that is connected to HDD2. [2-3] HDD INFO : BYTE [3] F ACTOR Y DEF AUL T SETTING [4] SYSTEM INFORMA TION ...

  • Clover Electronics CDR 4170 - page 65

    [6-1] SCHEDULE REC : OFF [6-2] SCHEDULE REC SETTING : No setup data 6] DISPLA Y [1] TITLE DISPLA Y : ON [2] BORDER LINE : ON [3] TIME / DA TE : ON [4] POSITION : BOTTOM 7] BUZZER [1] KEY BUZZER : ON [2] VIDEO LOSS : ON 8] ACCOUNT [1] DVR ACCOUNT SET [1-1] P ASSWORD : OFF [1-2] P ASSWOD CHANGE DEF AUL T P ASSWORD IS 11111111 [2] NETWORK ACCOUNT SET ...

  • Clover Electronics CDR 4170 - page 66

    - Check the brightness and contrast level of the monitor . 4. CHANNEL IS IN BLACK & WHITE MODE - Check the cameras. RECORDING RELA TED PROBLEMS 1. CORDING UNA V AILABLE - Adjust the camera screen. - Check recording speed or recordi ng schedule. - Adjust the system. PLA Y AND SEARCH RELA TED PROBLEMS 1. No Recorded Data. - Check camera inp ut. - ...

  • Clover Electronics CDR 4170 - page 67

    Limited 2Y ear W arranty This warranty gives the original purchaser specific legal rights and you ma y also have other rights, whic h may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 2 year on pa rts a nd labor from the date of original purchase. This warr ...

Manufacturer Clover Electronics Category DVR

Documents that we receive from a manufacturer of a Clover Electronics CDR 4170 can be divided into several groups. They are, among others:
- Clover Electronics technical drawings
- CDR 4170 manuals
- Clover Electronics product data sheets
- information booklets
- or energy labels Clover Electronics CDR 4170
All of them are important, but the most important information from the point of view of use of the device are in the user manual Clover Electronics CDR 4170.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Clover Electronics CDR 4170, service manual, brief instructions and user manuals Clover Electronics CDR 4170. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Clover Electronics CDR 4170.

Similar manuals

A complete manual for the device Clover Electronics CDR 4170, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Clover Electronics CDR 4170 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Clover Electronics CDR 4170.

A complete Clover Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Clover Electronics CDR 4170 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Clover Electronics CDR 4170, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Clover Electronics CDR 4170, that we can find in the current document
3. Tips how to use the basic functions of the device Clover Electronics CDR 4170 - which should help us in our first steps of using Clover Electronics CDR 4170
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Clover Electronics CDR 4170
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Clover Electronics CDR 4170 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Clover Electronics CDR 4170?

Use the form below

If you did not solve your problem by using a manual Clover Electronics CDR 4170, ask a question using the form below. If a user had a similar problem with Clover Electronics CDR 4170 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)