English dropdown-ico

Manual Classe Audio Omega Super Audio

12 pages 0.09 mb
Download

Go to site of 12

Summary
  • Classe Audio Omega Super Audio - page 1

    OWNER’S MANUAL Omega Super Audio Compact Disc Player V1.0 ...

  • Classe Audio Omega Super Audio - page 2

    CONTENTS Safety Precautions 3 Introduction 3 Congratulations 3 How to use this manual 3 Classé Omega SACD Player: Design Overview 3 T ransport 3 Digital Filtering Section 3 DAC Section 4 Power Supply 4 Unpacking and Positioning 4 Contents 4 Installing batteries in the remote control 4 Positioning the Omega SACD Player and Power Supply 4 Connection ...

  • Classe Audio Omega Super Audio - page 3

    3 SAFETY PRECAUTIONS W ARNING: failure to comply with these safety instructions can cause serious injury or death, or cause your Classé Omega SACD Player to be severely damaged or destroyed. Do not operate the Classé Omega SACD Player with any portion of the chassis removed or open. Dangerous voltages and laser radiation may be encountered. Conne ...

  • Classe Audio Omega Super Audio - page 4

    4 DAC Section The digital to analog conversion circuitry is a completely new design by Classé Audio. This unique design utilizes six channels of the Crystal CS4397 delta-sigma converter . For each of the Omega SACD balanced outputs, two channels of this DAC are used, one for the positive signal and one for the negative. For the single-ended output ...

  • Classe Audio Omega Super Audio - page 5

    AC power Check that the AC voltage for which this unit is configured matches your local AC line voltage. The correct operating voltage is indicated on the rear of the power supply chassis, adjacent to the AC power inlet. Operating this unit on AC voltage other than that specified on the rear of the unit can damage or destroy this unit and increase ...

  • Classe Audio Omega Super Audio - page 6

    6 CONTROLS AND OPERA TION This section describes all of the controls, front panel display , and operation of the Omega SACD Player . T urning on AC power The Omega SACD is turned on by means of a power switch located on the power supply unit. Do not turn the AC power on until all connections have been made. Standby mode If the Omega SACD Player is ...

  • Classe Audio Omega Super Audio - page 7

    Front panel display Below is an illustration of the Omega SACD front panel display and a description of each indicator . The remote control The remote control pr ovides access to all functions available on the front panel. In addition, several functions can only be accessed from the remote control. For instructions on how to use keys that are dupli ...

  • Classe Audio Omega Super Audio - page 8

    8 Playing a disc After the disc is loaded and the drawer closed, the Omega SACD Player will begin to detect which type of disc has been loaded and read the table of contents. Note that the Omega SACD player takes longer to start playing after the disc is loaded compared to conventional CD players. This is normal operation. Unlike a conventional pla ...

  • Classe Audio Omega Super Audio - page 9

    Using the direct access keypad The ten-digit keypad on the remote control can be used to directly access any track on the disc. Press the digits of the track you wish to access. T o access a track number greater than 11, press the >10 key , and then enter the two digit track number . Selecting inputs Press the INPUT key on the remote contr ol to ...

  • Classe Audio Omega Super Audio - page 10

    10 Controlling the display The Omega SACD Player display function can be changed using keys on the remote control as follows: ON/OFF Pressing the ON/OFF key will cause the display toggle between ON mode and OFF mode. In OFF mode, the display will remain off unless a key on the top panel or the remote control is pressed. In ON mode, the display rema ...

  • Classe Audio Omega Super Audio - page 11

    Using the Omega SACD remote control with other Classé products The Omega SACD Player remote control can be used to control all Classé pre-amplifiers and integrated amplifiers. VOLUME UP/DOWN Pressing these keys will raise or lower the pre-amplifier or integrated amplifier volume level. MUTE Pressing MUTE will cause the pre-amplifier or amplifier ...

  • Classe Audio Omega Super Audio - page 12

    W ARRANTY AND SERVICE For warranty service, contact your Classé dealer or Classé Audio directly at: Classé Audio 5070 Francois-Cusson Lachine, Québec Canada H8T 1B3 T elephone: +1 514 636 6384 Fax: +1 514 636 1428 email: cservice @ classeaudio.com Website: www .classeaudio.com 12 ...

Manufacturer Classe Audio Category CD Player

Documents that we receive from a manufacturer of a Classe Audio Omega Super Audio can be divided into several groups. They are, among others:
- Classe Audio technical drawings
- Omega Super Audio manuals
- Classe Audio product data sheets
- information booklets
- or energy labels Classe Audio Omega Super Audio
All of them are important, but the most important information from the point of view of use of the device are in the user manual Classe Audio Omega Super Audio.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Classe Audio Omega Super Audio, service manual, brief instructions and user manuals Classe Audio Omega Super Audio. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Classe Audio Omega Super Audio.

Similar manuals

A complete manual for the device Classe Audio Omega Super Audio, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Classe Audio Omega Super Audio by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Classe Audio Omega Super Audio.

A complete Classe Audio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Classe Audio Omega Super Audio - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Classe Audio Omega Super Audio, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Classe Audio Omega Super Audio, that we can find in the current document
3. Tips how to use the basic functions of the device Classe Audio Omega Super Audio - which should help us in our first steps of using Classe Audio Omega Super Audio
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Classe Audio Omega Super Audio
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Classe Audio Omega Super Audio in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Classe Audio Omega Super Audio?

Use the form below

If you did not solve your problem by using a manual Classe Audio Omega Super Audio, ask a question using the form below. If a user had a similar problem with Classe Audio Omega Super Audio it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)