English dropdown-ico

Manual Echo 2410 - Type 2E

32 pages 1.07 mb
Download

Go to site of 32

Summary
  • Echo 2410 - Type 2E - page 1

    Hedge Clipper Operator's Manual MODELS: HC-1500 - T ype 1E Serial Number 001001 & Up HC-1500 - T ype 2E Serial Number 001001 & Up HC-1600 - T ype 1E Serial Number 001001 & Up HC-2000 - T ype 1E Serial Number 001001 & Up HC-2400, 2410 - T ype 1E Serial Number 001001 & Up HC-2400, 2410 - T ype 2E Serial Number 001001 & Up ...

  • Echo 2410 - Type 2E - page 2

    2 I NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations tips and SAFETY messages. W ARNING DANGER Read rules for sa ...

  • Echo 2410 - Type 2E - page 3

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 3 Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. This symbol accompanied by the words WARNING and DANGER calls attent ...

  • Echo 2410 - Type 2E - page 4

    4 Symbol description/application Symbol form/shape Symbol description/application Symbol form/shape Hot Surface Carburetor adjustment - Idle speed Carburetor adjustment - High speed mixture Symbol description/application Symbol form/shape Symbol description/application Symbol form/shape Read and understand owners manual. Wear eyes, ears and head pr ...

  • Echo 2410 - Type 2E - page 5

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 5 FUEL W ARNING DANGER Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result. • Use an approved fuel container. • DO NOT smoke near fuel. • DO NOT allow flames or sparks near fuel. • Fuel tanks/cans may be under pressure. Always loosen fuel ...

  • Echo 2410 - Type 2E - page 6

    6 Physical Condition -- Eye Protection -- Eye protection that meet ANSI Z87.1 or CE requirements must be worn whenever you operate the Hedge Clipper. Hand Protection -- Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the transmission of machine vibration to your hands. Hearing Protection -- Wear hearing ...

  • Echo 2410 - Type 2E - page 7

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 7 SAFE OPERA TION Determine Operation Area • Do not operate this product indoors or in inadequately ventilated areas. • Review the area to be trimmed. Look for hazards that could contribute to unsafe conditions. • Spectators and fellow workers must be warned, and children and animals prevented from ...

  • Echo 2410 - Type 2E - page 8

    8 EXTENDED OPERA TION / EXTREME CONDITIONS V ibration and Cold It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations followed by loss of color and numbness in the ...

  • Echo 2410 - Type 2E - page 9

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 9 D ESCRIPTION The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immedi- ately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. CONTENTS __ 1 - Hedge Clipper Asse ...

  • Echo 2410 - Type 2E - page 10

    10 14 18 12 15 8 6 16 11 5 7 17 HC-2000, 2400, 2410 2 1 HC-1500, 1600 3 4 6 7 8 9 10 11 12 13 14 15 16 10 13 19 20 ...

  • Echo 2410 - Type 2E - page 11

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 11 1. SAFETY MANUAL - Read and understand this manual before operation. Keep manual in a safe location of safe operating techniques. 2. OPERATOR'S MANUAL - Read and understand this manual before operation. Keep manual in a safe location for future reference, i.e., operation, maintenance, storage and ...

  • Echo 2410 - Type 2E - page 12

    12 S PECIFICA TIONS L E D O ME 1 0 0 5 1 - C H E 2 0 0 5 1 - C H E 1 0 0 6 1 - C HE 1 0 0 0 2 - C HE 1 0 0 4 2 - C H E 2 0 0 4 2 - C H E 1 0 1 4 2 - C H E 2 0 1 4 2 - C H h t g n e Lm m 0 6 9 ) . n i 8 . 7 3 ( m m 3 3 1 1 ) . n i 6 . 4 4 ( m m 0 9 9 ) . n i 0 . 9 3 ( m m 0 3 0 1 ) . n i 6 . 0 4 ( m m 0 8 2 1 ) . n i 4 . 0 5 ( h t d i Wm m 5 2 2 ) . ...

  • Echo 2410 - Type 2E - page 13

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 13 A SSEMBL Y HC MODELS ARE PRE - ASSEMBLED IN THE BOX . Tools Required: None Parts Required: None P RE -O PERA TION FUEL Fuel Requirements Gasoline - Use 89 Octane [ ] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 15% MTBE (methyl tertiary-butyl ether). Gasohol conta ...

  • Echo 2410 - Type 2E - page 14

    14 Handling Fuel W ARNING DANGER Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result. • Use an approved fuel container. • DO NOT smoke near fuel. • DO NOT allow flames or sparks near fuel. • Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to ...

  • Echo 2410 - Type 2E - page 15

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 15 EQUIPMENT CHECK Before operation a complete check of the unit must be performed; • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found. • Never adjust bl ...

  • Echo 2410 - Type 2E - page 16

    16 4.5 m (15 ft.) C B COLD START RUN IDLE H L O PERA TION • Provide all users of this equipment with the Operator's Manual and instructions for Safe Operation. • Before starting the unit, equip yourself and any other person working within the 4.5 m (15 ft.) Safety Zone with the required Protective Equipment and clothing. • During operati ...

  • Echo 2410 - Type 2E - page 17

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 17 4 . START - PULL ROPE Lay the hedge clipper on a flat clear area and pull the recoil starter handle (D) until engine fires. 5 . OPEN CHOKE - RUN. Move choke (B) to the RUN (OPEN) position. Restart engine if necessary and allow unit to warm up at idle for several minutes. W ARNING DANGER The blades shou ...

  • Echo 2410 - Type 2E - page 18

    18 STOPPING ENGINE 1 . RELEASE THROTTLE. Allow engine to idle for a minute. 2 . STOP SWITCH - STOP. Move stop switch (A) to STOP position. W ARNING DANGER If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using hedge clipper again. ...

  • Echo 2410 - Type 2E - page 19

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 19 MAINTENANCE INTERV ALS m e t s y S / t n e n o p m o C e c n a n e t n i a M e r u d e c o r P e r o f e B e s U y r e v E l e u f e R y l i a D r o y r e v E 4 s r u o H 3 s h t n o M 0 0 1 r o s r u o H 6 s h t n o M 0 0 3 r o s r u o H y l r a e Y 0 0 6 r o s r u o H r e t l i F r i Ae c a l p e R / ...

  • Echo 2410 - Type 2E - page 20

    20 AIR FIL TER Level 1. Tools required: 25 or 50 mm (1 or 2 in.) medium bristle paint brush Parts required: 90008 REPOWER TM AIR & FUEL FILTER KIT 1. Close choke (Cold Start Position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumu- lated dirt from the air cleaner area. 2 . Remove the air cle ...

  • Echo 2410 - Type 2E - page 21

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 21 SP ARK PLUG Level 2. Tools required: T-wrench, Feeler gauge, Soft metal brush Parts required: Spark Plug, BPMR-7A 15901010230 1 . Remove spark plug and check for fouling, worn and rounded center electrode. 2 . Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will dam ...

  • Echo 2410 - Type 2E - page 22

    22 1 . Remove starter and disconnect the throttle cable end from the carburetor. 2 . Remove the two screws that retain the engine cover. Lift the engine cover (A) from the engine and lay aside. NOTE The throttle cable remains assembled to the engine cover (A) and the spark plug lead and grommet remain installed. IMPORTANT DO NOT use a metal scraper ...

  • Echo 2410 - Type 2E - page 23

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 23 1 . Before adjusting the carburetor, clean or replace the air filter and spark arrester screen. 2 . Start engine and run for several minutes to reach operating tempera- ture. 3 . Stop engine. Turn HI (A) speed needle CCW (counter clockwise) to stop. Turn LO (B) speed needle midway between full CCW and ...

  • Echo 2410 - Type 2E - page 24

    24 Basic Setting 1 . Stop engine and turn both LO (B) and HI (A) needles in, CW until they stop and are lightly seated. IMPORTANT DO NOT over tighten needles. Forcing them to tighten will damage the carburetor. 2 . Turn needles out CCW: HC-1500 LO (B) 1-1/4 turns; HI (A) 1-1/2 turns Others (LO) (B) 1-1/4 turns; HI (A) 1-3/8 turns Fine T uning (Requ ...

  • Echo 2410 - Type 2E - page 25

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 25 LUBRICA TION Blades Level 1. Tools required: Clean rag, 25 or 50 mm (1 or 2 in.) medium bristle paint brush Parts Required: 20W Engine Oil (lubrication), 50-50 mixture of kerosene and 20W oil (cleaning). W ARNING DANGER Hedge Clipper Blades are very sharp. Wear gloves to protect hands. 1 . Disconnect s ...

  • Echo 2410 - Type 2E - page 26

    26 Gear Box Assembly Level 2. Tools required: 3 mm Hexagon wrench, Grease Gun Parts Required: Gear Box Gasket, HC-2400 P/N 61041401260, HC-1500 2E P/N 61041406560, Others P/N 61041405360, ECHO ® LUBE TM 8 oz. (P/N 91014) or Lithium Based Grease. HC-1500 T ype 1, Type 1E 1 . Clean debris and dirt from gear box area. Remove the six (6) socket head c ...

  • Echo 2410 - Type 2E - page 27

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 27 HC-1500, T ype 2E, HC-2400, 2410 (All) Level 1. Tools required: Grease Gun, Clean rag Parts required: ECHO ® LUBE TM 8 oz. (P/N 91014) or Lithium Based Grease. 1 . Clean dirt from the grease fitting. 2 . Carefully pump grease into fitting. DO NOT force grease. Too much pressure will force grease past ...

  • Echo 2410 - Type 2E - page 28

    28 SHARPENING BLADES Level 3. Tools required: Flat file, Screwdriver Parts required: None W ARNING DANGER Hedge Clipper Blades are very sharp. Wear gloves to protect hands. 1 . Disconnect spark plug wire from spark plug. 2 . (Models HC-1500, HC-1600) Remove blade stiffener (See "Blade Stiffener Remove/Install" on page 26). 3 . File each e ...

  • Echo 2410 - Type 2E - page 29

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 29 W ARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by grounding spark plug against cylinder, otherwise serious personal injury may result. m e l b o r P d r a h s t r a t s - - e n i g n E t r a t s t o n s e o d - - e n i g n E e s u ...

  • Echo 2410 - Type 2E - page 30

    30 S TORAGE Long T erm Storage (over 30 days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: 1 . Store unit in a dry, dust free place, out of the reach of children. W ARNING DANGER Do not store in enclosure where fuel fumes may accumulate or r ...

  • Echo 2410 - Type 2E - page 31

    H EDGE C LIPPER O PERA TOR ' S M ANUAL 31 NOTES ...

  • Echo 2410 - Type 2E - page 32

    ECHO, INCORPORA TED 400 O AKWOOD R OAD L AKE Z URICH , IL 60047-1564 www .echo-usa.com DEALER? Call 1-800-432-ECHO 1-800-432-3246 www .echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8 - 5 Mon - Fri C.S.T. S ER VICING I NFORMA TION P ARTS Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from ...

Manufacturer Echo Category Trimmer

Documents that we receive from a manufacturer of a Echo 2410 - Type 2E can be divided into several groups. They are, among others:
- Echo technical drawings
- 2410 - Type 2E manuals
- Echo product data sheets
- information booklets
- or energy labels Echo 2410 - Type 2E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Echo 2410 - Type 2E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Echo 2410 - Type 2E, service manual, brief instructions and user manuals Echo 2410 - Type 2E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Echo 2410 - Type 2E.

Similar manuals

A complete manual for the device Echo 2410 - Type 2E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Echo 2410 - Type 2E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Echo 2410 - Type 2E.

A complete Echo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Echo 2410 - Type 2E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Echo 2410 - Type 2E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Echo 2410 - Type 2E, that we can find in the current document
3. Tips how to use the basic functions of the device Echo 2410 - Type 2E - which should help us in our first steps of using Echo 2410 - Type 2E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Echo 2410 - Type 2E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Echo 2410 - Type 2E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Echo 2410 - Type 2E?

Use the form below

If you did not solve your problem by using a manual Echo 2410 - Type 2E, ask a question using the form below. If a user had a similar problem with Echo 2410 - Type 2E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)