-
Netcomm NTC-30WV - page 1
NTC-30WVV Outdoor HSPA+ WiFi Router with Voice USER GUIDE ...
-
Netcomm NTC-30WV - page 2
2 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Copyright Copyright© 2012 NetComm Wireless Limited. All rights reserved. The information contained herein is proprietary to NetComm Wireless L imited. No part of this docum ent may be translated, transcribed, reproduced, in any form, or by any means without pr ...
-
Netcomm NTC-30WV - page 3
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 3 Table of Contents Overview ........................................................................................................................................................................................ 4 Product Introduction .......................... ...
-
Netcomm NTC-30WV - page 4
4 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Overview Introduction This document details the process of installing the NTC-30WV as well as mounting and deployment advice. This advice will include a few demonstration deployments and an explanation of related technologi e s that are suitable for this Outdoo ...
-
Netcomm NTC-30WV - page 5
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 5 AVERAGE TRANSMIT POW ER 802.11b 14.11 dBm 802.11g 13.32 dBm 802.11n – 20 MHz 13.38 dBm 802.11n – 40 MHz 13.21 dBm Table 3: Average Transm it Power Levels Prerequisites Before continuing with the installation of your NTC-30WV, please confirm that you comply ...
-
Netcomm NTC-30WV - page 6
6 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Product Introduction Product Overview Industrial-grade outdoor fixed wireless data gateway designed for rugged deployments in re mote environments and industrial applications Ideal for providing primary and backup wireless connectivity over 3G UMTS netw ...
-
Netcomm NTC-30WV - page 7
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 7 Physical Dimensions and Indicators LED Indicators The NTC-30WV uses 7 LEDs to display the current system and connection status. Figure 1 - NTC-3 0WV LED Indicators NTC-30WV LED INDICATOR ICON COLOUR DEFINITION High Signal Green High 3G Signal stre ngth availabl ...
-
Netcomm NTC-30WV - page 8
8 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com The 5 LEDs also indicate whether the device is MEP locked, SIM is not inserted and if the SIM is PIN or PUK locked by flashin g in certain patterns. Below is a table outlining the various LED flash sequences and their meanings. LED PATTERN DESCRIPTION All signa ...
-
Netcomm NTC-30WV - page 9
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 9 Physical Dimensions The following page lists the physical dimensions of the NTC-30WV , as well as the physical dimensions of the antennas and the included mounting bracket which can be used to attach the NTC-30WV to a pole or to provide a wall / ceiling mount. ...
-
Netcomm NTC-30WV - page 10
10 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Figure 4 - NTC-3 0WV Antenna NTC-30WV 3G AND WIFI ANTENNA Length 180 mm Diameter 20 mm Weight 60 g (w/o NTC-30WV a ttached) Table 7 - Antenna D imensions ...
-
Netcomm NTC-30WV - page 11
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 11 Interfaces The following interfaces are available on the NTC -30WV: 1 2 3 4 5 6 Figure 5 - Bottom Moun ted Interfaces ITEM INTERFACE FUNCTION 1 WiFi Antenna Conne ctor (TNC) Connect one of the W iFi antennas here. 2 DC Power Port Connect the optional DC Power ...
-
Netcomm NTC-30WV - page 12
12 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com NTC-30WV Default Settings The following tables list the default settings for the NTC-30WV. LAN (MANAGEMENT) Static IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 Table 10 - LAN Management Def ault Settings WIRELESS (WIFI) SSID: ...
-
Netcomm NTC-30WV - page 13
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 13 Restoring Factory Default Settings Restoring the NTC-30WV factory default settings will era se any configuration c hanges you have made. You may encounter situations where you need to restore the factory defaults on your router, such as: You have lost your ...
-
Netcomm NTC-30WV - page 14
14 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Implementation and Deployment Scenario The NTC-30WV is a robust 3G ( DC -HSPA+ ) router that connects to the 3G n e twork and is mounted either on the wall or a pole and positioned in an optimal position on the outside of a property. The NTC-30WV features a po ...
-
Netcomm NTC-30WV - page 15
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 15 Installation and Configuration of the NTC-30WV Hardware Installation Please refer to the NTC-30WV Installation Guide (available from the NetComm Wire less website) for instructions on assemblin g , mounting and placing the NTC-30WV . Powering the Router via DC ...
-
Netcomm NTC-30WV - page 16
16 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Powering the Router via a Power over Ethernet (PoE) Cable (Optional) Please refer to the Installation Guide for step - by -step instruc tions on connecting th e devices. Below is a diagram summarising the assembly when connecting via optional Power over Ethern ...
-
Netcomm NTC-30WV - page 17
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 17 Co nnecting wirelessly 1. Ensure WiFi is enabled on your device (e.g. computer/laptop/smartphone). 2. Scan for wireless networks in your area and connect to the network name that m atches the Wireless network name configured on the NTC-30WV . The default wirel ...
-
Netcomm NTC-30WV - page 18
18 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Configuring the NTC-30WV Logging on via the web-based user interface To log in to the management console and view the status and m a ke changes to your NTC-30WV, please follow the steps below: 1. Open your web browser (e.g. Internet Explorer/Firefox/Safari) an ...
-
Netcomm NTC-30WV - page 19
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 19 Status The status page provides system related information and is displayed when you login to the NTC-3 0WV management console. By default, the status page will show System Information , Ethernet Port Status, WWAN Status, IPsec Status and the 3G service connec ...
-
Netcomm NTC-30WV - page 20
20 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Figure 14 - S tatus Page - LAN De tails ITEM DEFINITION IP The current LAN IP Ad dress and Su bnet Mask. MAC Address The current MAC A ddress of the LAN port. Table 15 - Status Page - LA N Details Figure 15 - S tatus Page - PPPo E Details ITEM DEFINITION PPPoE ...
-
Netcomm NTC-30WV - page 21
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 21 ITEM DEFINITION Call Waiting Displays the status of the call waitin g function. Unconditional Call F orwarding Displays the status of unconditional c all forwarding. Un conditional call f orwarding is a forward placed on all calls as soon as they reach the pho ...
-
Netcomm NTC-30WV - page 22
22 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com ITEM DEFINITION Phone Module The phone module name, hardware a nd firmware versio n Module Boot versio n The installed bootlo ader version of the phone module . Module PRID The Protocol ID of t he phone module. System Uptime The time in minutes and seconds t h ...
-
Netcomm NTC-30WV - page 23
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 23 Internet Settings This section describes how to set up the router to initiate a WWA N connection. There are 2 different ways to set up a WWAN connection via PPP: Initiating the PPP Connection directly from the router (most common). Initiating the PPP C ...
-
Netcomm NTC-30WV - page 24
24 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com To connect using a C onnection profile The router supports multiple APN profiles; these profiles allow you to configure the settings that the router will use to con nect to the 3G network. By default, the “Auto matically configure my mobile broadband ” opt ...
-
Netcomm NTC-30WV - page 25
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 25 PPPoE The PPPoE page is used to configure a transparent PPPoE connection. This can be us ed to provide a bridged connection. To enable PPPoE mode, firstly ensure the “Auto Connect” is disabled in all the profil es on the “Connection” configuration pag ...
-
Netcomm NTC-30WV - page 26
26 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Band / Provider The band settings page enables you to select which frequency band you will use for your connection and enables you to scan for available network operators in your area. Figure 22 - B and / Provider Selection You may want to do this if you’re ...
-
Netcomm NTC-30WV - page 27
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 27 SIM Security If the SIM card is locked you will need to unlock it with a PIN provided with your SIM card. You can find out if the SIM is locked by viewing the SIM Status on the St a tus page: Figure 24 - SIM Security - Sta tus Page Warning If the SIM Status is ...
-
Netcomm NTC-30WV - page 28
28 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com LAN IP Setup The IP Setup page is used to configure the LAN Settings of the router and to enable or disable DNS Masqu erade. Figure 27 - IP Setup Settings The default IP of the Ethernet port is 192.168.1.1 with subnet mask 255.255.255.0. To change this, enter ...
-
Netcomm NTC-30WV - page 29
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 29 DHCP The DHCP page is used to adjust the DHCP settings used by the router. The DHCP settings are then passed onto any device connecting via DHCP. You can manually set the DHCP Start and End range, the DHCP Lease time, the default Domain name suffix, Primary an ...
-
Netcomm NTC-30WV - page 30
30 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Routing Static The Static Route page is used to add or delete static routes. Static routes can be used to facilitate communication between d e vices on different networks. Figure 30 - S tatic Route Settings Some routes are added by default by the router on ini ...
-
Netcomm NTC-30WV - page 31
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 31 RIP RIP (Routing Information Protocol) is used for advertising routes to other routers. Thus all the rout e s in the router’s routing table will be advertised to other nearby routers. For example, th e route for the router’s Ethernet subnet could be advert ...
-
Netcomm NTC-30WV - page 32
32 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com VRRP Virtual Router Redundancy Protocol (VRRP) is a non-proprietary redundancy protocol designed to increase the availability of the default gateway servicing hosts on the same subnet. This increased reliability is achieved by advertising a “virtual router? ...
-
Netcomm NTC-30WV - page 33
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 33 NAT Th e NAT page is used to configure the Network Addr ess Translation rules currently in use on the router. The router is in NAT mode by default. Figure 33 - NAT Settings This is only needed if you need to map inbound requests to a specific port on the WAN I ...
-
Netcomm NTC-30WV - page 34
34 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com DMZ The Demilitarised Zone (DMZ) enables a device to utilise a direct conn ection to the WAN. This means any incoming connections are forwarded directly to this device. The DMZ page is used to specify the IP Address of the device to this feature. Figure 34 - D ...
-
Netcomm NTC-30WV - page 35
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 35 VPN A Virtual Private Network (VPN) is a tunnel providing a private link betw ee n two networks or devices over a public network. D ata to be sent via a VPN tunnel needs to be encapsulated and as such is generally not visible to public networks. The advantages ...
-
Netcomm NTC-30WV - page 36
36 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com IPSec IPSec operates on Layer 3 of the OSI model and as such can protect higher layer protocols. IPS ec is used for both Site to Site VPN and Remote Access VPN. The NTC-30WV Outdoor WiFi Router supports IPsec end points and can be configured with Site to Site ...
-
Netcomm NTC-30WV - page 37
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 37 VPN - IPSec Field Descriptions ITEM DEFINITION Profile Type Select the type of VPN connection to use. Enable VPN Enable or Disable the VPN connection . Profile Name A name used to identify t he VPN conn ection. Remote IPsec Gateway The IP address tha t the IPs ...
-
Netcomm NTC-30WV - page 38
38 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com OpenVPN OpenVPN is an open source virtual private network (VPN) program for creating point - to -point or server- to -multi-client encrypted tunnels between host computers. It can traverse network address translation (NAT) and firewalls and allows auth enticat ...
-
Netcomm NTC-30WV - page 39
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 39 ITEM DEFINITION Profile Type Select the type of VPN connection to use. Enable VPN Enable or Disable the VPN connection . Profile Name A name used to ide ntify the VPN c onnection. OpenVPN Type Select the type of O penVPN session t o use. Server Port Enter the ...
-
Netcomm NTC-30WV - page 40
40 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com PPTP-Client The Point- to -Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks using a TCP and GRE tunnel to encapsulate PPP packets. PPTP operates on Layer 2 of the OSI model and is included on Windows computers. Figure 37 - ...
-
Netcomm NTC-30WV - page 41
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 41 GRE When you select GRE, a list of configured GRE VPNs is displayed. Click the “Add” button to configure a G RE VPN connection. Figure 38 - GR E VPN List Generic Routing Encapsulation (GRE) is a tunneling protocol developed by Cis c o that works in conjunc ...
-
Netcomm NTC-30WV - page 42
42 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com USSD The USSD page is used to send USSD (short SMS style) messages to the 3G service provider. Figure 40 - US SD Messaging USSD is a real-time messaging service usually utilised to perform mobile account related tasks such a s the following: 1. Checking availa ...
-
Netcomm NTC-30WV - page 43
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 43 Wireless Settings Basic Th e b a sic configuration page is used to define the basic wireless settings for the NTC-30 WV such as the SSID and the type of wireless security in use. Figure 41 - Wireles s Configuration - Basic S ettings OPTION DEFINITION Radio On/ ...
-
Netcomm NTC-30WV - page 44
44 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Security Settings You may choose from the following wireless security options: Open Shared WPA WPA- PSK WPA2 WPA2- PSK WPA- PSK -WPA2- PSK WPA1-WPA2 802.1x WPA1/WPA2 WPA (WiFi Protected Access) authentication is suitable for ...
-
Netcomm NTC-30WV - page 45
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 45 802.1x In order to use 802.1X security, you need to have a RADIUS s erve r on your network that w ill act as the authentication server. Please type in the details for your RADIUS server in the fields required. Figure 44 - Ad vanced View – WiF i Security Sett ...
-
Netcomm NTC-30WV - page 46
46 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com 2. Configure the LAN IP Address of Access Point 1. In this example, it is set to the default address of 192.168.1.1: Figure 46 - WD S - Access Poin t 1 LAN IP Set up 3. Enable the DHCP Server on Access Point 1: Figure 47 - WD S - Access Poin t 1 DHCP Serve r S ...
-
Netcomm NTC-30WV - page 47
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 47 4. Click Wireless Settings and then Basic. Enter the required details as listed in the table below: Figure 48 – WD S - Access Point 1 Repeater Mo de Setup OPTION DEFINITION Radio On/Off The Wireless Radio must be turned o n in order to use WD S. Set this to ...
-
Netcomm NTC-30WV - page 48
48 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Access Point 2 – No connection to mobile broadband 5. Access Point 2 will act as a repeater for and provide internet access to its clients through Access Point 1 and therefor e does not require a Mobile Broadband connection to be established. Figure 49 – W ...
-
Netcomm NTC-30WV - page 49
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 49 7. Set the DHCP Server on Access Point 2 to Disable: Figure 51 - WD S - Access Poin t 2 DHCP Settings ...
-
Netcomm NTC-30WV - page 50
50 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com 8. Under Wireless Setup, select the same frequency channel as you did for A ccess Point 1. Enter an SSID to identify Access Point 2 and set Network Authentication to Open. Copy the Network Authentication and WEP Encryption settings from Access Point 1. Set Acc ...
-
Netcomm NTC-30WV - page 51
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 51 Advanced Th e Advanced page is used to modify the advanced wireless settings for the router. These settings should not be changed unless you are aware of what effect they will have. Figure 53 - Wireles s Settings – Advan ced OPTION DEFINITION BG Protection M ...
-
Netcomm NTC-30WV - page 52
52 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com MAC / IP / Port Filter The Wireless LAN MAC / IP / Port filter feature ensures the network accessibility for the wireless client devices can be controlled. When the MAC/IP/Port filter is enabled with a default policy of “ A ccepted” , the rules that are cr ...
-
Netcomm NTC-30WV - page 53
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 53 Station List The Station List page shows the number of devices currently connected to your NTC-3 0WV via WiFi. The MAC address, Host Name and IP address of these devices are displayed. Figure 55 - Wireles s Station Lis t ...
-
Netcomm NTC-30WV - page 54
54 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Services Dynamic DNS Th e Dynamic DNS page is used to configure the Dynamic DNS feature of the router. There are a number of dynamic DNS hosts from which you can choose. Figure 56 - DD NS Settings Dynamic DNS provides a method for the router to update an exter ...
-
Netcomm NTC-30WV - page 55
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 55 System Monitor The System Monitor page is used to configure the behaviour of the Periodic Piing monitor function. Figure 58 - System Monitor Set tings The Periodic Ping Reset Monitor configures the router to transmit c ontrolled ping packets to 2 specified IP ...
-
Netcomm NTC-30WV - page 56
56 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com SNMP Th e SNMP page is used to configure the SNMP features of the router. Figure 59 - S NMP Settings SNMP (Simple Network Management Protocol) is used to remotely monitor the router for conditions th at may warrant administrati ve attention. It can be used to ...
-
Netcomm NTC-30WV - page 57
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 57 SMS The SMS pages are used to perform functions using the built-in SMS tools application. The SMS Tools application offers basic SMS functionality such as sending a message, receiving a message and redirecting an incoming m essa ge to another destination. You ...
-
Netcomm NTC-30WV - page 58
58 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com SMS Configuration for Redirectio n Incoming text messages can be redirected to another mobile device and/or a TCP/UDP message server. Redirect To Mobile You can forward incoming text messages to a different destination number. This destination number can be an ...
-
Netcomm NTC-30WV - page 59
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 59 New Message The New Message page is used to send an SMS text message to multiple recipients. Figure 61 - Ne w SMS Messa ge A new SMS message can be sent to a maximum of 100 recipients at the same time. After sending the message, the result is displayed next to ...
-
Netcomm NTC-30WV - page 60
60 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Inbox / Outbox You can check all sent SMS messages in the SMS Outbox or you can read, delete, reply or forward an SMS message to an other mobile device from the SMS Inbo x. You are also able to add the SMS message sender to the “White List” which is used t ...
-
Netcomm NTC-30WV - page 61
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 61 Diagnostics The Diagnostics page is used to configure the SMS Diagnostics and Com mand execution con figuration. This enables you to change the configuration or check on the status of the router via SMS commands. Figure 64 - SMS D iagnostics Settings The follo ...
-
Netcomm NTC-30WV - page 62
62 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Enable Authentication Enable or disable checking the se nder’s phone number against the allowed sender “ White List ” for incoming Diagnostics/Command Execution SMS messages . If authentication is enabled, the router will check if the sender’s number e ...
-
Netcomm NTC-30WV - page 63
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 63 Max. Diag. SMS Tx Limit You can set the maximum number of acknowledgement and error message s sent when an SMS Diagnostics and /or Command is execut ed . You can set t he maximum limit on a per hour/day/week or month basis. The default is to send a maximum of ...
-
Netcomm NTC-30WV - page 64
64 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com SMS Command format Generic Format for reading variables: get VARIABLE PASSWORD get VARIABLE Generic Format for writing to variables: set VARIABLE=VALUE PASSWOR D se t VARIABLE=VALUE Generic Format for executing a command: executeCOMMAND PASSWOR D executeCOMMAN ...
-
Netcomm NTC-30WV - page 65
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 65 List of valid commands (which can be used in conjunction with the execute command) : “pdpcycle”, “pdpdown” and “pdpup” commands can have a profile numb er suf fix ‘ x’ added. Without the su ff ix specified , the command operates against the cur ...
-
Netcomm NTC-30WV - page 66
66 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com SMS Diagnostics Examples The examples below demonstrate various combinations of supported commands. This is no t a complete list. To obt a in a complete list, please contact NetComm. DESCRIPTION AUTHENTICATION INPUT EXAMPLE Send SMS to change AP N Not required ...
-
Netcomm NTC-30WV - page 67
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 67 Auto Dial Use this page to configure the NTC-30WV to dial a pre-def ined number when you lift the handset of an att ached device. To use this function, set Enable Auto Dialling to “Enable” and typ e the number you want to dial when the handset is lifted. F ...
-
Netcomm NTC-30WV - page 68
68 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Load / Save Note: the Load/Save menu is only available to users logged in to the router using the user name root . To perform Firmware upgrade, device configuration backup and reset the gateway to factory defaults, you need to login as the root user. Settings ...
-
Netcomm NTC-30WV - page 69
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 69 Upload Th e Upload page enables you to upload firmware files or user created application pack ages to the NTC-30WV. Figure 68 - Upload Page Note: In order to perform an update, you must be logged into the router as the root user (see the Remote Administration ...
-
Netcomm NTC-30WV - page 70
70 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Figure 71 - R ecovery Console Banner To upload the main system software, click on “Application Inst aller” from the menu a t the top of the page and then click on the browse button and navigate to where the main system image upgrade file is located on your ...
-
Netcomm NTC-30WV - page 71
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 71 Package Manager The Package Manager page is used to provide details of any user in stalled packages on the router. Figure 74 - Pac kage Manager Items The Package Name, Version, Architecture and In stall time are shown while the package content det a ils are av ...
-
Netcomm NTC-30WV - page 72
72 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Administration Th e Administration page is used to enable or disable the firewall, remote administr a tion, telnet access and ping responses. Figure 75 - Ad ministration Configura tion Items OPTION DEFINITION Firewall Enable or disable the i n-built fir ewall ...
-
Netcomm NTC-30WV - page 73
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 73 System Configuration The System configuration page is used to specify an external syslog server and the TCP Keepaliv e settings. The TCP Keepalive can be used to ensure the WWAN connection does not disconnect due to inactivity. Figure 76 - System Configura tio ...
-
Netcomm NTC-30WV - page 74
74 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com TR - 069 The TR-069 (Technical Report 069) protocol is a technical specification also known a s CPE WAN Management Protocol (CWMP). It is a framework for remote management and auto-configuration of end-user devices such as customer-premises equipment (CPE) and ...
-
Netcomm NTC-30WV - page 75
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 75 Logoff The logoff item will log you out of your web configuration session. Figure 78 - Logoff Reboot The reboot item will reboot the router. This can be useful if you have made configuration c hanges you want to implement or want to reboot the router. Figure 7 ...
-
Netcomm NTC-30WV - page 76
76 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Technical Data The following table lists the hardware specifications of th e NTC-30WV. MODEL NETCOMM NTC-30WV Modem Module/Chi pset Sierra Wireless MC 8704 Memory RAM: 64MB DRAM Storage: 256MB Flash Operating Sys tem Embedded Linux 2.6 UMTS ba nds Quad-Band: 8 ...
-
Netcomm NTC-30WV - page 77
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 77 Additional Product Information Using the NTC-30WV to make and receive telephone calls The NTC-30WV provides circuit switched voice services via a telephony line interface offering the ability to make and receive telephone calls via a regular analogue telephone ...
-
Netcomm NTC-30WV - page 78
78 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Call feature codes Quick Reference Table The NTC-30WV supports a number of call feature codes for supplementary services. FEATURE ACTIVATION DEACTIVATION STATUS Caller ID #31# (to block an individual call) *31# (to unblock an individual call) N/A Call Waiting ...
-
Netcomm NTC-30WV - page 79
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 79 Call Forwarding No Answer Call forwarding No Answer will divert all incoming calls to a phone n umber that you desire only if the incoming call is not a nswered. 1. To enable Call Forwarding No Answer, dial *61*<Directory Number># (Where directory number ...
-
Netcomm NTC-30WV - page 80
80 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Call Forwarding Busy Call forwarding busy will divert all incoming calls to a phone nu mber that you desire only if your telephone is busy on anoth er ca ll. To enable Call Forwarding Busy, dial *67*<Directory Number># (Where directory number is the numb ...
-
Netcomm NTC-30WV - page 81
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 81 Appendix A: Tables Table 1 - Document R evision History ............................................................................................................................................. 2 Table 2: Maximum Trans mit Power Levels .................... ...
-
Netcomm NTC-30WV - page 82
82 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com Legal and Regulatory Intellectual Property Rights All intellectual property rights (including copyright and trade m ark rights) subsisting in, relating to or arising out this M anual are owned by and vest in NetComm Limited (ACN 002490486) ( NetComm ) (or its ...
-
Netcomm NTC-30WV - page 83
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 83 Product Warranty All NetComm products have a standard one (1) year warranty from date of purchase, however , some products have an extended warranty option (refer to packaging and the warranty card) (each a Product Warranty ) . To be eligible for the extended ...
-
Netcomm NTC-30WV - page 84
84 NTC- 30WV – Outdoor HSPA+ WiFi Router with Voice UM - 00003 www.netcomm wireless.com FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two c onditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference receive d, including interferen ...
-
Netcomm NTC-30WV - page 85
UM - 00003 www.netcomm wireless.com NTC-30W V – Outdoor HSPA+ WiFi Router with Voice 85 Contact Address: N et Comm Wirel e ss Limited 18 -20 Orion Road, Lane Cove NSW 2066 Sydney, Australia ABN: 85 002 490 486 Website: www.netcommwireless.com Phone: +61(0)2 9424 2070 Fax: +61(0)2 9424 2010 Email: sales@netcommwireless.com ; techsupport@netcommwir ...
Do you have a question concerning Netcomm NTC-30WV?
Use the form below
If you did not solve your problem by using a manual Netcomm NTC-30WV, ask a question using the form below. If a user had a similar problem with Netcomm NTC-30WV it is likely that he will want to share the way to solve it.