English dropdown-ico

Manual Denon AVR-2313

166 pages 33.02 mb
Download

Go to site of 166

Summary
  • Denon AVR-2313 - page 1

    A VR-2313 INTEGRA TED NET W ORK A V RECEIVER Owner ’ s Manual Basic version Adv anced version Infor mations DVD ...

  • Denon AVR-2313 - page 2

    I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence ...

  • Denon AVR-2313 - page 3

    II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do ...

  • Denon AVR-2313 - page 4

    1 Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ························································ ...

  • Denon AVR-2313 - page 5

    2 Features With a discrete-circuit configuration, the power amplifier provides identical quality for all 7 channels (135 W x 7ch) The unit is equipped with a power amplifier that reproduces highfidelity sound in sound mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-c ...

  • Denon AVR-2313 - page 6

    3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the ...

  • Denon AVR-2313 - page 7

    Basic version 4 F Connections v page5 F Setup v page26 F Playback (Basic operation) v page33 F Selecting a listening mode (Sound Mode) v page71 Basic version Here, we explain the connections and basic operation methods for this unit. Basic version Adv anced version Infor mations Basic version DVD ...

  • Denon AVR-2313 - page 8

    5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI-compatible device If your video device does not support HDMI con ...

  • Denon AVR-2313 - page 9

    6 Important information Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). This function automatically converts various formats of video signals input to ...

  • Denon AVR-2313 - page 10

    7 Connecting an HDMI-compatible device You can connect up to eight HDMI-compatible devices (6-inputs/2-outputs) to the unit. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable offer the following benefits that can not be achieved with other connection m ...

  • Denon AVR-2313 - page 11

    8 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this u ...

  • Denon AVR-2313 - page 12

    9 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC) IN HDMI (ARC) IN HDMI TV 1 TV 2 • Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the Blu-ray Disc/DV ...

  • Denon AVR-2313 - page 13

    10 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color or 4K, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet? ...

  • Denon AVR-2313 - page 14

    11 Connecting an HDMI-compatible device n Deep Color ( v page151 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page112 , 151 ) n “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color ( v page151 , 15 ...

  • Denon AVR-2313 - page 15

    12 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page7 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support HDMI connections. Connection methods for vari ...

  • Denon AVR-2313 - page 16

    13 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). • If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital audio signals from TV can be transm ...

  • Denon AVR-2313 - page 17

    14 a a a s s R L R L VIDEO AUDIO AUDIO R L OUT OUT VIDEO COMPONENT VIDEO Y P B P R OUT OUT COAXIAL OPTIC AL OUT Satellite tuner/Cable TV or or or Connecting a set-top box (Satellite tuner/cable TV) This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections. For instructions on HDMI connections, see ...

  • Denon AVR-2313 - page 18

    15 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). n Audio connection The following methods are available for connecting to this unit. Use e ...

  • Denon AVR-2313 - page 19

    16 Connecting an HDMI-incompatible device Connecting a Blu-ray Disc player This section describes how to connect when your Blu-ray disc player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). n Audio connection The following methods are available for connecting t ...

  • Denon AVR-2313 - page 20

    17 Connecting an HDMI-incompatible device Connecting a digital camcorder This section describes how to connect when your digital camcorder does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). n Audio connection The following methods are available for connecting to th ...

  • Denon AVR-2313 - page 21

    18 Connecting an HDMI-incompatible device Connecting a media player • This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). • When recording analog audio, use the analog connection. See “REC OUT ...

  • Denon AVR-2313 - page 22

    19 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 35 ) or “Playing a USB memory device” ( v page38 ). Cables used for connections To connect an iPod to this unit, use the USB cable supplied ...

  • Denon AVR-2313 - page 23

    20 Connecting an HDMI-incompatible device Connecting a CD player You can enjoy CD sound. n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality i ...

  • Denon AVR-2313 - page 24

    21 Connecting an FM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 41 “Listening to FM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. NOTE • Do not connect two ...

  • Denon AVR-2313 - page 25

    22 Connecting an external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device. • When using just one surround back speaker ...

  • Denon AVR-2313 - page 26

    23 Connecting an external control device REMOTE CONTROL jacks If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver. You can also use it to remotely control ZONE2 (another room). A UX OUT De ...

  • Denon AVR-2313 - page 27

    24 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as the Internet radio and music servers • Playback of music from ...

  • Denon AVR-2313 - page 28

    25 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 230 V, 50/60 Hz) Power cord (supplied) NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection cables. Doing so can resul ...

  • Denon AVR-2313 - page 29

    26 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more positions ...

  • Denon AVR-2313 - page 30

    27 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct ...

  • Denon AVR-2313 - page 31

    28 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey ® Setup) 5 Select “Start” and then press ENTER . Audyssey Setup Back Next Connect the calibration microphone to the SETUP MIC input on the front the AV receiver. 6 Select “Next” and then press ENTER . The subwoofer volume setting screen is displayed. Au ...

  • Denon AVR-2313 - page 32

    29 Calculation Set up speakers (Audyssey ® Setup) 11 Repeat step 10, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements finished.” message is displayed. Repeat Last Test Audyssey Setup Calculation Measurements finished. 12 Select “Calculation” and then press ENTER . Measuring results are analyzed, and ...

  • Denon AVR-2313 - page 33

    30 Set up speakers (Audyssey ® Setup) 14 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now storing...Please wait. 50% Audyssey Setup Distances Speaker Config. Levels Crossovers Store Check processing results. To proceed, press “Store”. • Saving the results requires about 10 seconds. • During s ...

  • Denon AVR-2313 - page 34

    31 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey ® Setup again. • If the result still differs from the actual co ...

  • Denon AVR-2313 - page 35

    32 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Use ui to select “Parameter Check” and then press ENTER . Audyssey Setup Amp Assign Channel Select Parameter Check Start Your AV receiver can automatically measure the acoustics of your room then optimize your s ...

  • Denon AVR-2313 - page 36

    33 Playback (Basic operation) Setup ( v page26 ) n Turning the power on ( v page33 ) n Selecting the input source ( v page33 ) n Adjusting the master volume ( v page34 ) n Turning off the sound temporarily ( v page34 ) n Playing a Blu-ray Disc player/DVD player ( v page34 ) n Playing Super Audio CD ( v page34 ) n Playing a CD p ...

  • Denon AVR-2313 - page 37

    34 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page108 ). n When the “Scale” setting ( v page108 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page108 ) is “–79.5dB – 18.0dB” G Adju ...

  • Denon AVR-2313 - page 38

    35 Playing a CD player The following describes the procedure for playing CD player. 1 Prepare for playback. q Turn on the power of the subwoofer and player. w Load the disc in the player. 2 Press POWER X to turn on power to the unit. 3 Press CD to switch the input source to “CD”. 4 Play the CD player. Playing an iPod You can use the USB cable p ...

  • Denon AVR-2313 - page 39

    36 Playing an iPod n Setting Browse mode (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on iPod in “Browse Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. 2 Press OPTION . The option menu screen is ...

  • Denon AVR-2313 - page 40

    37 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Browse mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Repeat Option Random Operation Mode 3 Use o p to select repeat playback mode. OPT ...

  • Denon AVR-2313 - page 41

    38 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FA ...

  • Denon AVR-2313 - page 42

    39 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 19 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p . 4 Use ui to select the ...

  • Denon AVR-2313 - page 43

    40 Playing a USB memory device n USB memory device operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Picture View / Slideshow uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and rel ...

  • Denon AVR-2313 - page 44

    41 Listening to FM broadcasts For antenna connections, see “Connecting an FM antenna” ( v page21 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default setting is ...

  • Denon AVR-2313 - page 45

    42 Listening to FM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Us ...

  • Denon AVR-2313 - page 46

    43 Listening to FM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER . The direct tuner screen is displayed and ...

  • Denon AVR-2313 - page 47

    44 Listening to FM broadcasts Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press FM to switch the input source t ...

  • Denon AVR-2313 - page 48

    45 n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Memory”, then press ENTER . The li ...

  • Denon AVR-2313 - page 49

    46 Listening to FM broadcasts n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Name”, then pres ...

  • Denon AVR-2313 - page 50

    47 n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu ...

  • Denon AVR-2313 - page 51

    48 Listening to FM broadcasts Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H TUNE+/- STEREO AUTO CH / OPTION FM CH 1 FM 87.50MHz Now Playing Tune Preset Option Preset Skip ...

  • Denon AVR-2313 - page 52

    49 n PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). PTY identifies the type of RDS program. The program types and their displays are as follows: NEWS News WEATHER Weather AFFAIRS Current Affairs FINANCE Finance INFO Information CHILDREN Children’s program SPORT Sports EDUCATE Education SOCIAL Soc ...

  • Denon AVR-2313 - page 53

    50 n TP search TP identifies programs that carry traffic announcements. This allows you to easily find out the latest traffic conditions in your area before leaving home. Use this function to find RDS stations broadcasting traffic programs (TP stations). 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu scree ...

  • Denon AVR-2313 - page 54

    51 n Radio Text RT allows RDS stations to send text messages that appear on the display. “Radio Text” appears on the display when radio text data is received. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Radio Text” , then press ENTER . G TV Screen H TUNE+/- STE ...

  • Denon AVR-2313 - page 55

    52 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable broadcast station types H Supported file types I ...

  • Denon AVR-2313 - page 56

    53 Listening to internet radio n Adjusting the sound quality (Restorer) Make this setting at “Restorer” ( v page107 ) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode 3 (Low)”. ...

  • Denon AVR-2313 - page 57

    54 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet ra ...

  • Denon AVR-2313 - page 58

    55 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network ...

  • Denon AVR-2313 - page 59

    56 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7) NOTE Perform this procedure after ch ...

  • Denon AVR-2313 - page 60

    57 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 24 “Connecting to a home network (LAN)”). w If settings are required, make the “Setti ...

  • Denon AVR-2313 - page 61

    58 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching content with keywords (Text Search) ( v page65 ) ...

  • Denon AVR-2313 - page 62

    59 Using online services This unit supports playback of the online services shown below. n About Last.fm ( v page60 ) Last.fm learns what you love... and it’s a great way to discover new music. Your new DENON AV receiver is very clever. You can create a free Last.fm profile when you start using your DENON AV receiver and magically keep track ...

  • Denon AVR-2313 - page 63

    60 Using online services Listening to Last.fm Last.fm radio is not available in all countries. Please check http://www.last.fm/hardware for more information. You’ll also need a subscription. Get one today at http://www.last.fm/subscribe. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 24 “Co ...

  • Denon AVR-2313 - page 64

    61 9 Menu items on playback screen. Menu [1/3] Love this track Ban this track Scrobbling (On) Love this track Loving tracks improves your Last.fm recommendations, and you can optionally share them on popular social networks. Ban this track If you ban a track, we won’t play it again. You can undo this on the Last.fm website. Scrobbling Scrobbling ...

  • Denon AVR-2313 - page 65

    62 n Last.fm operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press and hold) Stop BACK Return SETUP Setup menu 9 Auto search (cue) Using online services Basic ver ...

  • Denon AVR-2313 - page 66

    63 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 24 “Connecting to a home network (LA ...

  • Denon AVR-2313 - page 67

    64 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the number of user comments or number of times they ...

  • Denon AVR-2313 - page 68

    65 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page65 ) n Performing repeat playback (Repeat) ( v page66 ) n Perfor ...

  • Denon AVR-2313 - page 69

    66 Convenient functions Performing repeat playback (Repeat) USB Media Server 1 While content is playing, press OPTION . The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION USB Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back MP3 128kbps Repeat Option Random Picture View 3 Use o p ...

  • Denon AVR-2313 - page 70

    67 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorite Memory) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server). 1 Wh ...

  • Denon AVR-2313 - page 71

    68 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Internet Radio Media Server Favorites Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu screen is displayed. 4 Use ui to select “Re ...

  • Denon AVR-2313 - page 72

    69 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod touch, or iPad directly to the unit If you update ...

  • Denon AVR-2313 - page 73

    70 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check “Allow iTunes c ...

  • Denon AVR-2313 - page 74

    71 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music. This unit supports playback of almost all of these multi-chan ...

  • Denon AVR-2313 - page 75

    72 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” ( v page105 ) to enjoy your favorite sound mode. Operation button Input signal Listening mode 2-channel z 1 STEREO DOLB ...

  • Denon AVR-2313 - page 76

    73 Selecting a listening mode Operation button Input signal Listening mode DTS-HD / DTS Express DTS-HD HI RES / DTS-HD HI RES A-DSX z 4 DTS-HD MSTR / DTS-HD MSTR A-DSX z 4 DTS Express / DTS Express A-DSX z 4 DTS-HD + NEO:6 DTS-HD + PL g x Music DTS-HD + PL g z PCM/DSD multi-channel MULTI CH IN / MULTI CH IN A-DSX z 4 MULTI CH IN 7.1 MULTI IN + Dolb ...

  • Denon AVR-2313 - page 77

    74 Selecting a listening mode Operation button Input signal Listening mode All DIRECT PURE DIRECT z 1 2-channel also includes analog input. z 2 This mode plays back 2-channel source in 5.1 or 7.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used. z 3 Some listening modes cannot be selected, depen ...

  • Denon AVR-2313 - page 78

    75 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back channel. By adding the surround back channel, a str ...

  • Denon AVR-2313 - page 79

    76 Selecting a listening mode Audyssey DSX listening mode Listening mode type Description Audyssey DSX (A-DSX) z This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front high channels, the surround sound effects sound more three dimensional and realistic. z This can be select ...

  • Denon AVR-2313 - page 80

    Advanced version 77 F Installation/connection/setup of speakers (Advanced) v page78 F Playback (Advanced operation) v page91 F Playback in ZONE2 (Separate room) v page97 F How to make detailed settings v page99 Advanced version Here, we explain functions and operations that let you make better use of this unit. Basic version Adv anced v ...

  • Denon AVR-2313 - page 81

    78 Procedure for speaker settings Speaker installation Speaker connection ( v page80 ) Set up speakers ( v page89 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. ...

  • Denon AVR-2313 - page 82

    79 Speaker installation When 7.1ch speakers are installed using front height speakers When using Dolby Pro Logic g z or Audyssey DSX ® , install front height speakers. FL FR FHR FHL C SL SR SW z 1 z 2 z 3 Listening position z 1 22˚ – 30˚ z 2 22˚ – 45˚ z 3 90˚ – 110˚ G Speaker abbreviations H FL Front speaker (L) SB Surround back speake ...

  • Denon AVR-2313 - page 83

    80 Speaker connection Here, we connect the speakers in the room to this unit. This section explains how to connect them using a typical example. n Connecting 7.1-channel speakers using surround back speakers ( v page81 ) n Connecting 7.1-channel speakers using front height speakers ( v page82 ) n Connecting 7.1-channel speakers using front wi ...

  • Denon AVR-2313 - page 84

    81 Speaker connection Connecting 7.1-channel speakers using surround back speakers The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers. To perform 7.1-channel playback using the surround back speakers, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up ...

  • Denon AVR-2313 - page 85

    82 FL FR C SL SR SW FHR FHL Connecting 7.1-channel speakers using front height speakers The illustration on the right shows a connection example for performing 7.1-channel playback using the front height speakers. To perform 7.1-channel playback using the front height speaker, set “Assign Mode” to “Front Height” in steps 3 to 5 for “Set u ...

  • Denon AVR-2313 - page 86

    83 FL FR C SL SR SW FWR FWL Connecting 7.1-channel speakers using front wide speakers The illustration on the right shows a connection example for performing 7.1-channel playback using the front wide speakers. To perform 7.1-channel playback using the front wide speaker, set “Assign Mode” to “Front Wide” in steps 3 to 5 for “Set up “Amp ...

  • Denon AVR-2313 - page 87

    84 Speaker connection Connecting 6.1-channel speakers using one surround back speaker If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” ( v page79 ). To perform 6.1-channel playback using the surround back speaker, set ...

  • Denon AVR-2313 - page 88

    85 Speaker connection SL SR FL FR C SW Connecting 5.1-channel speakers To perform 5.1-channel playback, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up “Amp Assign”” ( v page89 ). Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see ...

  • Denon AVR-2313 - page 89

    86 Speaker connection FL(A) FL(B) FR(B) FR(A) SW Connecting front A/B speakers You can connect a second set of speakers to this unit and use them for playback. In this case, set “Assign Mode” to “Front B” in steps 3 to 5 for “Set up “Amp Assign”” ( v page89 ). Cables used for connections Audio cable (sold separately) Speaker cabl ...

  • Denon AVR-2313 - page 90

    87 Speaker connection FL FR SW Connecting 2.1-channel speakers Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page80 . • For speaker impedance , see page80 . n For connecting two subwoofers Two subwoofers can be connected to this unit. The same signal ...

  • Denon AVR-2313 - page 91

    88 Speaker connection FL FR SW w q w q (R) (L) Connecting front speakers with a bi-amp connection • You cannot use surround back speakers in a bi-amp connection. Use front speakers that support a bi-amp connection and connect the speakers to the FRONT speaker terminals and the SURROUND BACK speaker terminals. In this case, set “Assign Mode? ...

  • Denon AVR-2313 - page 92

    89 1 Set up the remote control unit n Set up the zone mode Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. Press MAIN 2 Connect the setup microphone. Audyssey Setup Amp Assign Channel Select Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone. Set th ...

  • Denon AVR-2313 - page 93

    90 Set up speakers 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . Channel Select Subwoofer Measure Audyssey Setup Amp Assign Channel Select Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone. Set the following items if nec ...

  • Denon AVR-2313 - page 94

    91 Setup ( v page26 ) Playback (Basic operation) ( v page33 ) Selecting a listening mode (Sound Mode) ( v page71 ) n HDMI control function ( v page91 ) n Sleep timer function ( v page92 ) n Quick select function ( v page93 ) n REC OUT mode ( v page94 ) n Web control function ( v page95 ) n Various memory functions ( v page? ...

  • Denon AVR-2313 - page 95

    92 HDMI control function If the HDMI control function does not operate properly, check the following points. • Is the TV or player compatible with the HDMI control function? • Is “HDMI Control” ( v page113 ) set to “On”? • Is “Power Off Control” ( v page113 ) set to “All” or “Video”? • Is “Control Mon ...

  • Denon AVR-2313 - page 96

    93 Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. • By saving frequently used settings at the QUICK SELECT 1 – 4 b ...

  • Denon AVR-2313 - page 97

    94 REC OUT mode • When using the audio/video recording connectors (MEDIA PLAYER outputs), you can record the audio or video from a different program source while listening to the currently played track. • For the connection method, see “Connecting a media player” ( v page18 ). 1 Press ZONE2 / REC SOURCE until “RECOUT SOURCE” is ...

  • Denon AVR-2313 - page 98

    95 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 24 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be a ...

  • Denon AVR-2313 - page 99

    96 Web control function G Example 2 H Setup menu screen VIDEO AUDIO PICTURE ADJUST HDMI SETUP OUTPUT SETTINGS VOLUME DISPLA Y VIDEO INPUTS SPEAKERS NETWORK USER ACCOUNT GENERAL INFORMATION FIRMWARE SAVE LOAD Contrast Brightness Saturation Hue Enhancer 0 Set 0 Set 0 Set 0 Set 0 Set Auto Lip Sync ON ***** ***** OFF HDMI Audio Out AVR TV i/p Scaler An ...

  • Denon AVR-2313 - page 100

    97 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. The source selected for Z ...

  • Denon AVR-2313 - page 101

    98 Playback 1 Press ZONE2 to switch the zone mode to the ZONE2. ZONE2 lights. Input source select buttons 2 Press POWER X to turn on the ZONE2 power. The indicator on the display lights. • Also press input source select button when in standby mode, the power turns on. • When POWER X is pressed, ZONE2 turns off. • Power in ZONE2 can b ...

  • Denon AVR-2313 - page 102

    99 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed settings Setting items Detailed items Description ...

  • Denon AVR-2313 - page 103

    10 0 Menu map Setting items Detailed items Description Page General Language Sets the language for display the menu on the TV screen. 131 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 131 Zone Rename Change the display title of each zone to one you prefer. 131 Quick Select Names Change the “Quick Select” display title to one ...

  • Denon AVR-2313 - page 104

    101 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Audio [1/2] Surround Parameter Tone Dialogue Level Subwoofer Level Restorer Audio Delay Volume Audyssey Adjust surround sound parameters q Currently selected setup icon w List of GUI menu setup icons e Currently selected setup i ...

  • Denon AVR-2313 - page 105

    10 2 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w w Audio q Press SETUP to display the menu screen. w TV screen: Displays the select ...

  • Denon AVR-2313 - page 106

    10 3 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page65 ) • Preset Name ( v page46 ) • Source Rename ( v page118 ) • Friendly Name ( v page127 ) • Zone Rename ( v page131 ) • Quick Select Names ( v page13 ...

  • Denon AVR-2313 - page 107

    10 4 Audio Make audio-related settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Men ...

  • Denon AVR-2313 - page 108

    10 5 Setting items Setting details Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. You can set this when the sound mode is set to DTS NEO:6 in the “Music” mode. 0.0 – 1.0 (0.3) The smaller the value, the more dialogue is concentrated on the cent ...

  • Denon AVR-2313 - page 109

    10 6 Setting items Setting details Set Defaults The “Surround Parameter” settings are returned to the default settings. Yes : Reset to the defaults. No : Do not reset to the defaults. When you select “Set Defaults” and press ENTER , the “Reset to the default values?” prompt is displayed. Select either “Yes” or “No”, and press EN ...

  • Denon AVR-2313 - page 110

    10 7 Subwoofer Level Default settings are underlined. Sets the subwoofer on/off and its output level. Setting items Setting details Subwoofer Turn subwoofer output on and off. On : The subwoofer is used. Off : The subwoofer is not used. NOTE This can be set when the sound mode is “DIRECT” or “PURE DIRECT” ( v page71 ) and the “Subwoofe ...

  • Denon AVR-2313 - page 111

    10 8 Audio Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page 112 ) is set to “On” and when a TV compatible with Auto Lip Sync is connected. • Store ? ...

  • Denon AVR-2313 - page 112

    10 9 Audio Setting items Setting details Dynamic EQ Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. On : Use Dynamic EQ. Off : Do not use Dynamic EQ. is displayed when set to “On”. NOTE When the menu “Dynamic EQ” setting is “On”, ...

  • Denon AVR-2313 - page 113

    11 0 Audio Graphic EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Graphic EQ” can be set when “MultEQ ® XT” setting ( v page108 ) is “Graphic EQ”. Setting items Setting details Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. All : Adjus ...

  • Denon AVR-2313 - page 114

    111 Video Make video-related settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu ...

  • Denon AVR-2313 - page 115

    11 2 Video Picture Adjust Default settings are underlined. Picture quality can be adjusted. We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments. • This item can be set when the input source is CBL/SAT DVD Blu-ray ...

  • Denon AVR-2313 - page 116

    11 3 Video Setting items Setting details HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. On : Use HDMI control function. Off : Do not use HDMI control function. • When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “Off”. • Pl ...

  • Denon AVR-2313 - page 117

    11 4 Video Setting items Setting details i/p Scaler Convert the input source resolution to the resolution set. CBL/SAT DVD Blu-ray z GAME z AUX MEDIA PLAYER CD z NETWORK TV AUDIO z Analog : Use i/p scaler function for analog video signal. Analog & HDMI : Use i/p scaler function for analog and HDMI video signal. HDMI : Use i/p scaler function fo ...

  • Denon AVR-2313 - page 118

    11 5 Video Info Display Default settings are underlined. Displays status of operation temporarily when the sound mode is changed, or input source is switched. You can set whether or not to show each of these status displays. Setting items Setting details On-screen Info On : Turn display on. Off : Turn display off. Audio Display Default settings are ...

  • Denon AVR-2313 - page 119

    11 6 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ...

  • Denon AVR-2313 - page 120

    11 7 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER CD TV AUDIO HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 : Assign an HDMI input connector to the selected input source. None : Do not assign an HDMI input connector to the selected inpu ...

  • Denon AVR-2313 - page 121

    11 8 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER CD TV AUDIO COAX (COAXIAL) 1 / COAX (COAXIAL) 2 / OPT (OPTICAL) 1 / OPT (OPTICAL) 2 : Assign a digital input connector to the selected input source. None : Do not assign a digital input ...

  • Denon AVR-2313 - page 122

    11 9 Inputs Hide Sources Default settings are underlined. Remove from the display input sources that are not used. Setting details CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / iPod/USB / CD / FM / NETWORK / TV AUDIO : Select input source that is not used. • Show : Use this source. • Hide : Do not use this source. NOTE • Inpu ...

  • Denon AVR-2313 - page 123

    12 0 Inputs Video Source Default settings are underlined. Video of another input source is played back combined with the playing audio. Setting details Default : Play the picture and sound of the input source. Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX / CD : Select video input source to view. The video of the selected input sou ...

  • Denon AVR-2313 - page 124

    12 1 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page108 ). • Can be used without changing the settings. Please set if necessary. Menu operat ...

  • Denon AVR-2313 - page 125

    12 2 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page108 ...

  • Denon AVR-2313 - page 126

    12 3 Setting items Setting details Bass Set subwoofer and LFE signal range playback. Subwoofer Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is ...

  • Denon AVR-2313 - page 127

    12 4 Speakers Setting items Setting details Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Unit : Set the unit of distance. • Meters / Feet Step : Set the minimum variable width of the distance. • 0.1m / 0.01m • 1ft / 0.1ft Set Defaults : The ? ...

  • Denon AVR-2313 - page 128

    12 5 Speakers Setting items Setting details Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Crossover : Set the crossover frequency. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200 ...

  • Denon AVR-2313 - page 129

    12 6 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” setti ...

  • Denon AVR-2313 - page 130

    12 7 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby. Setting details Off In Standby : Suspend network function during standby. Always On : Ne ...

  • Denon AVR-2313 - page 131

    12 8 Network Settings Default settings are underlined. Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Network Information IP Control Friendly Name Settings Maintenance Mode Selects how configure the network settings q Network/Settings DHCP IP Address Subnet Mask Default Gat ...

  • Denon AVR-2313 - page 132

    12 9 Network Setting details n Proxy settings Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Network Information IP Control Friendly Name Settings Maintenance Mode Selects how co ...

  • Denon AVR-2313 - page 133

    13 0 General Make various other settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the M ...

  • Denon AVR-2313 - page 134

    13 1 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Deutsch / Français / Italiano / Español / Nederlands / Svenska “Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. ...

  • Denon AVR-2313 - page 135

    13 2 Quick Select Names Change the “Quick Select” display title to one you prefer. Setting details Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4 • Up to 16 characters can be input. • For character input, see page103 . Trigger Out Selects when to activate trigger out. For details about how to connect the TRIGGER ...

  • Denon AVR-2313 - page 136

    13 3 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presence of front, surround, LFE). Sample Rate : The input signal’s ...

  • Denon AVR-2313 - page 137

    13 4 General Firmware Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Setting details Update Update the firmware of the receiver. NOTE In cases where it is not possible to connect to the network after doing a firmware update, conn ...

  • Denon AVR-2313 - page 138

    13 5 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page126 ). Upgrade Package : Display the items to be upgrade ...

  • Denon AVR-2313 - page 139

    Informations 13 6 F Part names and functions v page137 F Other information v page142 F Troubleshooting v page154 F Specifications v page159 F Index v page160 Informations Here, we list various information related to this unit. Please refer to this information as needed. Basic version Adv anced version Infor mations Infor mations DVD ...

  • Denon AVR-2313 - page 140

    13 7 Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q3 Q8 Q4 Q5 Q6 Q7 u r t y e q w Q0 o Q1 Q2 i q Power operation button ( X ) ··················································· ( 33 ) Turn power to this unit on and off (standby). w Power indicator ···· ...

  • Denon AVR-2313 - page 141

    13 8 Display t r y u i o Q0 Q1 Q2 q w e q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e ZONE2 indicator This lights up when ZONE2 (separate room) power is turned on ( v page98 ). r MUTE indicator This lights when the mute mode is selected ( v page34 ...

  • Denon AVR-2313 - page 142

    13 9 Rear panel See the page indicated in parentheses ( ). q w r y t u Q3 i o Q0 Q2 Q1 e q FM antenna terminal (ANTENNA) ········································· ( 21 ) w Analog audio connectors (AUDIO) ····················································? ...

  • Denon AVR-2313 - page 143

    14 0 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e r y t i o Q000 u Q3 Q4 Q2 Q7 Q1 Q5 Q6 q ZONE SELECT buttons (MAIN, ZONE2) ····································· ( 27 , 98 ) w Input source select buttons ················· ( 33 , 98 ) e FAVO ...

  • Denon AVR-2313 - page 144

    14 1 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with ne ...

  • Denon AVR-2313 - page 145

    14 2 Other information n Trademark information ( v page142 ) n Surround ( v page143 ) n Relationship between video signals and monitor output ( v page149 ) n Explanation of terms ( v page151 ) Trademark information This product uses the following technologies (Random order): Manufactured under license from Audyssey Laboratories™. U.S. ...

  • Denon AVR-2313 - page 146

    14 3 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode ...

  • Denon AVR-2313 - page 147

    14 4 Surround Sound Mode ( v page71 ) Surround Parameter ( v page105 ) z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z 15 This item can be selected when a Dolby Digital or DTS signal is played. z 16 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z 17 This ...

  • Denon AVR-2313 - page 148

    14 5 Surround Sound Mode ( v page71 ) Subwoofer ( v page107 ) Tone z 18 ( v page107 ) Audyssey ( v page108 ) Restorer z 21 ( v page107 ) z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z 5 Only when “Subwoofer Mode” is set to “LFE+Main” ( v page 123 ), sound is output from t ...

  • Denon AVR-2313 - page 149

    14 6 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode. Sound Mode ( v page71 ) NOT ...

  • Denon AVR-2313 - page 150

    14 7 Surround Sound Mode ( v page71 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CD PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag ...

  • Denon AVR-2313 - page 151

    14 8 Surround Sound Mode ( v page71 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CD PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag ...

  • Denon AVR-2313 - page 152

    14 9 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Conversion Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO On A A A A A A Only the menu is displayed A A On A A S S <VIDEO> S <VIDEO> S (VIDEO) A (VIDEO) On ASA S <COMPONENT> S <C ...

  • Denon AVR-2313 - page 153

    15 0 Video signal resolution conversion table When “Video Conversion” ( v page113 ) is set to “On”, “i/p Scaler” ( v page 114 ) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output ( v page6 “Converting input video ...

  • Denon AVR-2313 - page 154

    15 1 Explanation of terms A Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network. App Store App Store ...

  • Denon AVR-2313 - page 155

    15 2 Downmix This function converts the number of channels of surround audio to less number of channels and plays back. DTS This is an abbreviation of Digital Theater System, which is a digital audio system developed by DTS. When playing back audio by connecting this system with a device such as DTS amplifier, accurate sound field position and re ...

  • Denon AVR-2313 - page 156

    15 3 P Progressive (sequential scanning) This is a scanning system of video signal that displays 1 frame of video as one image. Compared to the interlace system, this system provides images with less flickering and bleeding. Protection Circuit This is a function to prevent damage to devices within the power supply when an abnormality such as an ov ...

  • Denon AVR-2313 - page 157

    15 4 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malf ...

  • Denon AVR-2313 - page 158

    15 5 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume. • Cancel the mute mode. • Check the connection with the playback device and selec ...

  • Denon AVR-2313 - page 159

    15 6 G FM H Symptom Cause/Solution Page Reception fails, or there is a lot of noise or distortion. • Change the antenna orientation or position. • Use an FM outdoor antenna. • Separate the antenna from other connection cables. 21 21 21 G iPod / USB memory device / Internet radio / Media server / Last.fm / Flickr H Symptom Cause/Solut ...

  • Denon AVR-2313 - page 160

    15 7 Symptom Cause/Solution Page For some radio stations, “Radio station server full” or “Connection down” is displayed and station cannot be connected to. • Station is congested or not currently broadcasting. Wait a while before trying again. – Sound is broken during playback. • Network or USB memory device’s signal transfer ...

  • Denon AVR-2313 - page 161

    15 8 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. X TUNER PRESET CH + TUNER PRESET CH – 1 Turn off the power using X . 2 Press X while simultaneously pressing TUNER PRESET CH + and TUNER PRE ...

  • Denon AVR-2313 - page 162

    15 9 Specifications n Audio section • Power amplifier Rated output: Front: 105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) ...

  • Denon AVR-2313 - page 163

    16 0 v Numerics 2.1-channel ························································· 87 3D ······································································· 11 5.1-channel ·····················? ...

  • Denon AVR-2313 - page 164

    16 1 v O On-screen Info ················································· 115 Operation Mode ················································· 36 Output Settings ············································· ...

  • Denon AVR-2313 - page 165

    16 2 Dimensions Unit : mm 338.5 379.0 214.5 54.0 70.0 15.0 152.0 167.0 434.0 344.0 60.0 45.0 45.0 18.5 22.0 Weight : 10.9 kg Basic version Adv anced version Infor mations Infor mations DVD ...

  • Denon AVR-2313 - page 166

    D&M Holdings Inc. 3520 10082 00AD V00 www.denon.com ...

Manufacturer Denon Category Stereo Receiver

Documents that we receive from a manufacturer of a Denon AVR-2313 can be divided into several groups. They are, among others:
- Denon technical drawings
- AVR-2313 manuals
- Denon product data sheets
- information booklets
- or energy labels Denon AVR-2313
All of them are important, but the most important information from the point of view of use of the device are in the user manual Denon AVR-2313.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Denon AVR-2313, service manual, brief instructions and user manuals Denon AVR-2313. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Denon AVR-2313.

Similar manuals

A complete manual for the device Denon AVR-2313, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Denon AVR-2313 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Denon AVR-2313.

A complete Denon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Denon AVR-2313 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Denon AVR-2313, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Denon AVR-2313, that we can find in the current document
3. Tips how to use the basic functions of the device Denon AVR-2313 - which should help us in our first steps of using Denon AVR-2313
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Denon AVR-2313
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Denon AVR-2313 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Denon AVR-2313?

Use the form below

If you did not solve your problem by using a manual Denon AVR-2313, ask a question using the form below. If a user had a similar problem with Denon AVR-2313 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)