-
Tyco 1529L - page 1
Elo T ouchmonitor User Guide For 15” LCD Desktop 1529L Revision C ...
-
Tyco 1529L - page 2
Elo T ouchmonitor User Guide 15 " LCD De s ktop 1529L Revision C P/N 008603 Elo T ouchSyste ms. 1-800-ELOTOUCH www.elotouch.com ...
-
Tyco 1529L - page 3
Copyright © 2006 Tyco Electronics Corporation. All Rights Reserved. No part of this publication may be reproduced, tra nsmitted, tra nscribed, stored in a retrieval system, or tra nslated into a ny la nguage or computer la nguage, in a ny form or by a ny mea ns, including, but not limited to, electronic, magnetic, optical, che mical, ma nual, or o ...
-
Tyco 1529L - page 4
Chapter 1 Introduction 1 Product Description ................................................. 1 Detailed LCD Display Performance Requirements .......................................................... 2 Customer Display .............................................. 3 Serial Version ................................................. 3 Fingerprint R ...
-
Tyco 1529L - page 5
Appendix B T ouchmonitor Safety 49 Care and Handling of Your Touchmonitor .......... 50 Appendix C T echnical Specif ication s 51 Touchmonitor Specifications ......................... 52 AccuTouch Touchscreen Specifications ................................................ 53 IntelliTouch Touchscreen Specifications .................................. ...
-
Tyco 1529L - page 6
...
-
Tyco 1529L - page 7
C H A P T E R 1 I NTRODUCTION Product Description The 1529L is a retail terminal designed to pre sent information to the operator a nd the customer . The 1529L is available in seri al a nd USB versions or combo touch monitor . The 1529L functionally consists of a 15.0” LCD main display with a touchscreen, a customer display , a n optional va cuum ...
-
Tyco 1529L - page 8
The credit card rea der rea ds all three stripes on a sta ndard credit card or drivers license. The credit card is rea d by sliding the credit card, stri pe side toward the display through the credit card rea der forward or ba ckward. There is a USB credit card rea der only . The Hub provides 4 internal USB ports to be used by the credit card rea d ...
-
Tyco 1529L - page 9
Customer Display The Customer Display is a twenty chara cter two line va cuum fluorescent display (VF D). It consists of a VF D a nd VF D controller . Serial V ersion Optional Para meters Chara cters per row 20 Number of rows 2 Chara cter 5x7 dot matrix configuration Chara cter He ight 9.5mm Chara cter width 6.2mm Chara cter ASCII configuration Cha ...
-
Tyco 1529L - page 10
Specifications Sensor SecuGen FOR Image Ca pture Speed 600ms/fra me Image T ra nsfer Speed 500Byte/ms Pixel Reso lution 356x292 USB Signaling T ype Full Speed T ype Theory of Operation The USB host initi ates communication with the F DU01 using operation comma nds (Sensor LED On, Fingerprint Ca pture Start a nd Stop). Fingerprint data are then ca p ...
-
Tyco 1529L - page 11
Six Port USB Hub The Hub provides 4 internal USB ports to be used by the credit card rea der, the finger- print rea der , the touchscreen, a nd the customer display . The hub also supplies two USB ports to the outside of the ba ck of the 1529L for external use. The hub is only used by the USB version of the 1529L. The hub meets the f ollowing requi ...
-
Tyco 1529L - page 12
1-6 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 13
C H A P T E R 2 I NST ALLA TION AND S ETUP This cha pter discusses how to install your LCD touchmonitor a nd how to install Elo T ouchSystems driver software. Unpacking Y our T ouchmonitor Check that the following ite ms are pre sent a nd in good condition: T ouchmonitor USB Ca ble V ideo ca ble Power ca ble US/Ca ndia n Europea n power ca ble D VI ...
-
Tyco 1529L - page 14
Product Overview Main Unit Note: Shown with optional Biometric & MSR. Rear View Note: Shown with optional Rear Facing Customer Display. 2-8 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 15
Side View Base Bottom View 2-9 or ...
-
Tyco 1529L - page 16
Kensington TM Lock The Kensington TM lock is a security device that prevents theft. T o find out more a bout this security device, do to http://www . kensington.com. 2-10 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 17
USB Interface Connection Y our touchmonitor comes with only one touchscreen connector ca bles: USB cable. (For W indows 2000, Me a nd XP syste ms only .) T o set up the display , plea se refer to the f ollowing figures a nd procedures: Remove the Ca ble Cover The ca bles are connected at the ba ck of the monitor . ca ble cover T o re move the cover ...
-
Tyco 1529L - page 18
C AUTION Before connecting the ca bles to your touchmonitor and PC, be sure that the computer a nd touchmonitor are turned off. N OTE Before conne cting the cable s to the touchmonitor , route all the cables through the hole in the second a s shown in the picture a bove. 2-12 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 19
The following illustrations guide you step by ste p in connecting your touchmonitor using a USB ca ble connection. Power cord Connect one end of the power cord to the monitor a nd the other end to wall. Connect the power ca ble to the power port in the monitor . 2-13 ...
-
Tyco 1529L - page 20
V ideo ca ble Connect one end of the video ca ble to the rear side of computer a nd the other to the LCD. T ighten by turning the two thumb screws clockwise to ensure proper grounding. Y ou ca n select D VI video cable or D-SUB15 video cable. D VI cable 2-14 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 21
Speaker ca ble Connect one end of the speaker ca ble to the speaker port in the computer a nd the other end to the port in the monitor. 2-15 ...
-
Tyco 1529L - page 22
USB ca ble Connect one end of the USB ca ble to the rear side of the computer a nd the other to the LCD monitor. The USB ca ble is for optional touch, MSR, CD a nd Finger Print Rea der . Only one USB ca ble is needed because the device contains a self powered USB 1.1 Hub. T wo self powered ports are availa ble for running other USB devices. For tou ...
-
Tyco 1529L - page 23
USB / SERIAL Interface Connection Y our touchmonitor comes with only one touchscreen connector ca bles: USB cable. (For W indows 2000, Me a nd XP syste ms only .) T o set up the display , plea se refer to the f ollowing figures a nd procedures: Remove the Ca ble Cover The ca bles are connected at the ba ck of the monitor . ca ble cover T o re move ...
-
Tyco 1529L - page 24
C AUTION Before connecting the ca bles to your touchmonitor and PC, be sure that the computer a nd touchmonitor are turned off. N OTE Before conne cting the cable s to the touchmonitor , route all the cables through the hole in the second a s shown in the picture a bove. 2-18 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 25
The following illustrations guide you step by ste p in connecting your touchmonitor using a USB ca ble connection. Power cord Connect one end of the power cord to the monitor a nd the other end to wall. Connect the power ca ble to the power port in the monitor . 2-19 ...
-
Tyco 1529L - page 26
V ideo ca ble Connect one end of the video ca ble to the rear side of computer a nd the other to the LCD. T ighten by turning the two thumb screws clockwise to ensure proper grounding. Y ou ca n select D VI video cable or D-SUB15 video cable. D VI cable 2-20 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 27
Speaker ca ble Connect one end of the speaker ca ble to the speaker port in the computer a nd the other end to the port in the monitor. 2-21 ...
-
Tyco 1529L - page 28
USB ca ble Seri al cable For USB interfa ce, connect one end of the USB ca ble to the rear side of the computer a nd the other to the LCD monitor . For Seri al interface, connect one end of the RS-232 ca ble to the rear side of the conputer a nd the other to the LCD monitor . 2-22 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 29
Replace the Cable Cover Ca ble cover li p ca bles Then you have attached all the ca ble s to the monitor , gently bring all the ca bles toward the sta ndard so they fit under the cover li p. Sna p the Ca ble cover in place over the connections. 2-23 ...
-
Tyco 1529L - page 30
Optimizing the LCD Display T o ensure the LCD display works well with your computer , configure the display mode of your gra phic card to make it less tha n or equal to 1024 x 768 resolution, a nd make sure the ti ming of the display mode is compatible with the LCD display . Refer to Appen- dix A for more inf ormation a bout resolution. Compatible ...
-
Tyco 1529L - page 31
Magnetic Stri pe Rea der No device are needed. T e sting the USB MSR Keyboard Emulation 1 Plug in the device. 2 Open MS W ord. 3 Slide the card through the MSR to view the data. T e sting the USB-HID Cla ss MSR 1 On the CD, browse to T ouch Monitor Peri pheralsMagnetic Stri pe Card ReadersDe mo. 2 Open the Readme.txt a nd f ollow instructions to ...
-
Tyco 1529L - page 32
1.5 This di alog will appear 1.6 Swi pe T est card. 1.7 Close Rea d Cards Di alog. 1.8 Click on Send Comma nd. The following di alog box will a ppear 1.9 T o send Inquiry MSR type 1.10 T ype 00 10 into area under the hea ding Message(Hex) 2-26 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 33
1.11 Then click on Send Message. 1.12 The DA T A=00 mea ns it’s USB HID. 1.13 Switch to Keyboard Emulation 1.14 T ype 01 10 01 into area under the hea ding Message(Hex) 1.15 Then click on Send Me ssage. 1.16 Send Inquiry MSR type 1.17 T ype 00 10 into area under the hea ding Message(Hex) 1.18 Then click on Send Me ssage. 2-27 ...
-
Tyco 1529L - page 34
1.19 The DA T A=01 mea ns it’s USB Keyboard Emulation. 1.20 Y ou must now reset the MSR by sending the comma nd 02. 1.21 T ype 02 into area under the hea ding Message(Hex) 1.22 Then click on Send Message. 1.23 Double click on The KB MSR T est icon in the desktop a nd slide the test c card. The following icon will a ppear 1.24 Done. Convert MSR fr ...
-
Tyco 1529L - page 35
1.2 click on About to verify version 1.3 Close About Dialog. 1.4 Click on Send Comma nds 1.5 This Di alog will appear . 1.6 T o send Inquiry MSR type 1.7 T ype 00 10 into area under the hea ding Message(Hex) 1.8 Then click on Send Me ssage. 2-29 ...
-
Tyco 1529L - page 36
1.9 The DA T A=01 mea ns it’s USB Keyboard Emulation. 1.10 Switch to HID 1.11 T ype 01 10 00 into area under the hea ding Message(Hex) 1.12 Then click on Send Message. 1.13 Send Inquiry MSR type 1.14 T ype 00 10 into area under the hea ding Message(Hex) 1.15 Then click on Send Message. 1.16 Y ou must now reset the MSR by sending the comma nd 02. ...
-
Tyco 1529L - page 37
1.19 Click on Rea d Cards… 1.20 This di alog will a ppear 1.21 Swi pe T est card. 1.22 Cose Rea d Cards Dialog. 1.23 Done. 2-31 ...
-
Tyco 1529L - page 38
Re ar Fa cing Customer Display USB Customer Display Plug in the USB ca ble atta ched to the Customer Display unit. The New Hardware W iz- ard di alog box will appear . 1 Choose Next a nd select “ Sear ch for the best driver for your device (Recommended) ” then choose Next . 2 When a list of search locations is displayed, pla ce a checkmark on t ...
-
Tyco 1529L - page 39
T o test the drivers: 1 In windows click on Start > Run 2 Enter “cmd” > OK 3 T ype “ ECHO ELO>.LCLD9” > Enter The display will show ELO. Installing the T ouch Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM for the ...
-
Tyco 1529L - page 40
Installing the USB T ouch Driver In stalling the USB T ouch Driver f or W indows XP , Windows 2000, Me a nd 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If W indows XP , W indows 2000,W indows 98, or W indows Me starts the Add New Hardware W izard: 2 Choose Next . Select “Search f or the best driver for your device (Recommended)? ...
-
Tyco 1529L - page 41
C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will unlikely require a djustment. V ariations in video output a nd ap- plication may require a djustments to your touchmonitor to opti mize the quality of the display. For best performa nce, your touchmonitor should be operating in native resolution, that is 1024 x 768 ...
-
Tyco 1529L - page 42
5 4 3 2 1 15” LCD Function Key Controls Function 1 Power Switch T urns the display system power on or off . 2 Select Displays the OSD menus on the screen a nd used to select (“Clockwise” a nd “Counter -clockwise” direction) the OSD control options on the screen. 3 Adjusts the decrea sing value of the selected OSD control option. 4 Adjusts ...
-
Tyco 1529L - page 43
Controls and Adjustment OSD Lock/Unlock Y ou are a ble to lock a nd unlock the OSD feature. The monitor is shi pped in the unlocked position. T o lock the OSD: 1 Press the Menu button a nd button si multa neously for 2 seconds. A window will a ppear displaying “OSD U nlock”. Continue to hold the buttons down for a nother 2 seconds a nd the wind ...
-
Tyco 1529L - page 44
OSD Control Options Brightne ss • Ba ckground Lumina nce of the LCD pa nel is a djusted. Contra st • Adjusts the contra st or the values of color gain (RED, GREEN or BLUE). Sharp ne ss • The sharpne ss ca n be a djusta ble. Pha se • Adjusts the pha se of the dot clock. Auto Adjust • Clock system auto a djustment (under 5 seconds). OSD Lef ...
-
Tyco 1529L - page 45
Power-Save (No In put) • The LCD pa nel background is cut when there is no signal input (AC line power consumption of 4w or less). Power LED Display & Power Saving General Power Saving Mode When the power switch are switch on , this LED lights in gr een . The LED indicates the diff erent power status with altered LED colors when monitor opera ...
-
Tyco 1529L - page 46
CAUTION In order to protect the LCD, be sure to hold the ba se when adjusting the LCD, a nd ta ke care not to touch the screen. 3-40 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 47
Controls and Adjustment OSD Lock/Unlock Y ou are a ble to lock a nd unlock the OSD feature. The monitor is shi pped in the unlocked position. T o lock the OSD: 1 Press the Menu button a nd button si multa neously for 2 seconds. A window will a ppear displaying “OSD U nlock”. Continue to hold the buttons down for a nother 2 seconds a nd the wind ...
-
Tyco 1529L - page 48
3-42 Elo T ouchmonitor User Guide OSD Control Options Brightne ss • Ba ckground Lumina nce of the LCD pa nel is a djusted Contra st • Gain of R, G, a nd B signal is a djusted. Sharp ne ss • The sharpness ca n be a djusta ble. Pha se • The pha se of the dot clock is adjusted. Auto Adjust • Automatically a djusts the systems dot clock(take ...
-
Tyco 1529L - page 49
Recall Defaults • Restore all original fa ctory defaults. OSD Ti meout • Adjust how long the OSD menu is displayed. Input V ideo Select • Select D-SUB Analog, dvi Digital signal. V olume • T o increa se or decrease the sound level. 3-43 ...
-
Tyco 1529L - page 50
3-44 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 51
C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the f ollowing ta ble. If the problem persists, plea se conta ct your local dealer or our service center . Elo T echni- cal Support numbers are listed on the la st page of this ma nual. Solutions to Common Problems Pr oble m Sugge stion(s) The monitor ...
-
Tyco 1529L - page 52
4-46 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 53
C H A P T E R A N A TIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD pa nel is designed to perf orm best. For the Elo LCD touchmonitor , the native resolution is 1024 x 768 for the 15.0 inch size. In almost all ca ses, screen i mages look best when viewed at their native re solution. Y ou ca n lower the r ...
-
Tyco 1529L - page 54
As a n exa mple, a SV GA resolution LCD pa nel has 800 pixels horizontally by 600 pixels vertically . Input video is also repre sented by the sa me terms. XGA input video ha s a format of 1024 pixels horizontally by 768 pixels vertically . When the input pixels con- tained in the video input format match the native resolution of the pa nel, there i ...
-
Tyco 1529L - page 55
C H A P T E R B T OUCHMONIT OR S AFETY This ma nual contains information that is i mporta nt f or the proper setup a nd maintena nce of your touchmonitor . Before setting up a nd powering on your new touchmonitor , rea d through this ma nual, especi ally Cha pter 2 (Installation), a nd Chapter 3 (Operation). 1 T o reduce the risk of electric shock, ...
-
Tyco 1529L - page 56
Care and Handling of Y our T ouchmonitor The f ollowing ti ps will help keep your Elo Entuitive touchmonitor functioning at the opti mal level. • T o avoid risk of electric shock, do not disa ssemble the brick supply or display unit ca binet. The unit is not user servicea ble. Reme mber to unplug the display unit from the power outlet before clea ...
-
Tyco 1529L - page 57
C H A P T E R C T ECHNICAL S PECIFICA TIONS Display Modes Y our Elo Entuitive touchmonitor is compatible with the following sta ndard video modes: Ite m Resolution T ype H. Sca n(KHz) V . Sc a n(Hz) Pol. 1 640X350 V GA 31.469 70.087 + / 2 720X400 V GA 31.469 70.087 - / + 3 640X480 V GA 31.469 59.940 - / 4 640X480 VESA72 37.861 72.809 -/ 5 640X480 V ...
-
Tyco 1529L - page 58
T ouchmonitor Specifications Model 1529L LCD Display 15.0” TFT Active Matrix Pa nel Display Size 304.1(H) x 228(V) mm Pixel Pitch 0.297(H) x 0.297(V) mm Display Mode V GA 640 x 350 (70 Hz) V GA 720 x 400 (70 Hz) V GA 640 x 480 (60 / 72 / 75 Hz) SV GA 800 x 600 (56 / 60 / 72 / 75Hz) XGA 1024 x 768 (60 / 70 / 75Hz) Native XGA 1024 x 768 Contrast Ra ...
-
Tyco 1529L - page 59
AccuT ouch T ouchscreen Specif ication s Mecha nical Construction T op: Polyester with outside hard-surfa ce coating with clear or a ntiglare finish. Inside: T ra nsparent conductive coating. Bottom: Glass substrate with unif orm resistive coating. T op a nd bottom layers separated by Elo-patented se parator dots. Positional Accuracy Sta ndard devi ...
-
Tyco 1529L - page 60
IntelliT ouch T ouchscreen Specif ications Mecha nical Positional Accura cy Sta ndard devi ation of error is less tha n 0.080 in. (2.03 mm). Equate s to less tha n ±1%. T ouchpoint Density More tha n 100,000 touchpoints/in2 (15,500 touchpoints/cm2). T ouch Activation Force T ypically less tha n 3 ounces (85 gra ms). Surfa ce Dura bility Surface du ...
-
Tyco 1529L - page 61
Infrared T ouchscreen Specif ication s Mecha nical Input Method Input Method Finger or gloved ha nd activation Electrical Positional Accuracy T ypical centroid a ccura cy: 2 mm with 1 mm ST D error Resolution T ouchpoint density is ba sed on controller resolution of 4096 x 4096 T ouch Activation For ce No mini mum touch a ctivation force is require ...
-
Tyco 1529L - page 62
C-56 Elo T ouchmonitor User Guide Acoustic Pulse Recognition Spe cification MECHANICAL Input method Finger , finger nail, gloved ha nd, or stylus activation ELECTRICAL Position accura cy 1% max. error Resolution a ccura cy T ouchpoint density is based on controller resolution of 4096 x 4096 T ouch activation for c e T ypically 2 to 3 ounces (55 to ...
-
Tyco 1529L - page 63
15” LCD T ouchmonitor(ET1529L-XXXA-1-XX-T) Dimensions 15” LCD T ouchmonitor(ET1529L-XXXA-1-XX) Dimensions C-57 ...
-
Tyco 1529L - page 64
C-58 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 65
REGULA TOR Y INFORMA TION I. Electrical Safety Information: A) Compli a nce is required with respect to the voltage, frequency , a nd current require- ments indicated on the ma nufa cturer’s la bel. Connection to a dif ferent power source tha n those specified herein will likely re sult in improper operation, da mage to the equi p- ment or pose a ...
-
Tyco 1529L - page 66
This Information T echnology Equi pment (ITE) is required to have a CE M ark on the ma nufa cturer’s label which mea ns that the equi pment ha s been tested to the following Directive s a nd Sta ndards: This equi pment ha s been tested to the requirements f or the CE M ark as required by EMC Directive 89/336/EEC indicated in Europea n Sta ndard E ...
-
Tyco 1529L - page 67
61 "The a pplication of this monitor is restricted to special controlled luminous environments.The screen surfa ce trend to reflect a nnoying light of la mps a nd sunlight. T o avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries. The monitor is in complia nce with Reflection Cla ss III ac ...
-
Tyco 1529L - page 68
62 Elo T ouchmonitor User Guide ...
-
Tyco 1529L - page 69
W ARRANTY Except a s otherwise stated herein or in a n order a cknowledgment delivered to Buyer, Seller warra nts to Buyer that the Product shall be free of defects in materi als a nd workma nshi p. W ith the exception of the negoti ated warra nty periods; the warra nty for the touchmonitor a nd components of the product is 2 years. Seller makes no ...
-
Tyco 1529L - page 70
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY SET FOR TH ABOVE, SELLER G RANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A TUTE OR OTHER WISE, REGAR DING THE PRODUCTS, THEIR FIT NESS FOR ANY PURPOSE, THEIR QUALITY , THEIR MERCHANT ABILITY , THEIR NONINFRINGEMENT , OR OTHER W ...
-
Tyco 1529L - page 71
Numerics 15.0" LCD T ouchmonitor (1529L-XXW A-1) Dimensions, 57 A About T ouchmonitor Adjustments, 35 AccuT ouch T ouchscreen Specifications, 53 Acoustic Pulse Re cognition Specification, 56 Auto Adjust, 38 B Ba se Bottom Vi ew , 9 Brightness, 38 C Care and Ha ndling of Y our T ouchmonitor , 50 Chemical Re sista nce, IntelliT ouch, 54 Chemical ...
-
Tyco 1529L - page 72
N Native Resolution, 47 O Optical, AccuT ouch, 53 Optical, IntelliT ouch, 54 Optical, IR, 55 Optimizing the LCD Display , 24 OSD Control Options, 38,42 OSD Left/Right, 38,42 OSD Lock/Unlock, 37,41 OSD Menu Functions, 37,41 OSD Position, 38,42 OSD Timeout, 39,43 OSD Up/Down, 38,42 P Pha se, 38,42 Positional Accura cy , AccuT ouch, 53 Positional Accu ...
-
Tyco 1529L - page 73
© 2006 T yco Electronics Corporation Printed in USA Check out Elo’s Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers Getting in Touch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.eloto ...
-
Tyco 1529L - page 74
LCD Touchmonitor /1529L Power Cord A Power Cord B Compact Disc VGA Cord Serial Cord Audio Cord Recommended Disassembly Sequence DVI CORD USB Cord ...
-
Tyco 1529L - page 75
USB I NTELLIHEAD FOR SWIPE READERS TEC HNICA L REFERE NCE M A N UA L Manual P art Number 99875320-1P OCTOBER 20 04 PRELIMIN A R Y REGISTERED TO ISO 9001:2000 20725 South Annalee Avenue Carson, CA 90746 Phone: (310) 631-8602 FA X: (3 10) 631- 3956 Technical Support: (651) 41 5-6800 www.magtek.com ...
-
Tyco 1529L - page 76
ii Copyright © 200 4 MagTe k ® , In c. Printe d in the U nited S t ates of Americ a Informa t ion i n this docum ent is subje ct to change wi thout n otice. No part of this docum ent may be reproduced or transmit ted in any form or by any means, electronic or m echanical, for an y purpose , without th e express w ritten permission of M agTek, I n ...
-
Tyco 1529L - page 77
iii Limited Warranty MagTek , Inc . warran ts tha t the P roduc t desc ribed i n thi s documen t is free o f def ects in mater ials and workm anship for a period o f one ye ar from the d ate of purchase wher e th e da te of purch ase is def ined as the date of shipment from MagTek . During thi s warranty period , Mag Tek sha ll, at their optio n, r ...
-
Tyco 1529L - page 78
iv FCC WAR NING STA TEMEN T Thi s equ ipment has be en test ed and foun d to compl y wit h the l imits fo r Clas s B digit al de vice, pur suant to Part 15 of FCC Rule s. These limits are desig ned to p rovide reasona ble pro tect ion agai nst harmful inte r feren ce whe n the equ ipmen t is o perat ed in a re sid entia l envi ron ment. Thi s equi ...
-
Tyco 1529L - page 79
v TABLE OF CO NTENT S SECT ION 1 . FEA TURES A ND SP ECIFICAT I ONS ...... ........ ......... ........ ......... ..... ........ ......... ........ ........ ... 1 FEATU RES . ........ ......... ........ ........ ......... ..... ......... ........ ........ ......... ........ ........ ......... ........ ...... ........ ........ 1 CONF IGURATIONS .. .. ...
-
Tyco 1529L - page 80
vi Figure 1-1. 3-Trac k USB IntelliHead ...
-
Tyco 1529L - page 81
1 SECTI ON 1. FEA TURES AND S PEC IFICA TIONS The USB (U niversal Serial Bus) IntelliH ead Swip e Reader is a co mpact magnetic s tripe card reader that conforms to ISO standards. The Reader is compatible with an y device with a USB interface. A c ard is read by slidin g it past the h ead either f orward or bac kward. The reader conforms to the USB ...
-
Tyco 1529L - page 82
USB IntelliHead S wipe Reader 2 CONFIGUR ATIONS The Config urations are a s follows: Table 1 -1. Configurat ions ACCESS ORIES The accessories are as follows: Part Number Description 21042806 US B MSR Demo Program with Sou rce Code (Diskette) 99510026 US B MSR Demo Program with Sou rce Code ( W EB) REFERENCE DOCUMEN TS MagTe k Magnetic Card Reader D ...
-
Tyco 1529L - page 83
Section 1. F eatures and Specifications 3 SPECIFICAT IONS Table 1-2 lists the spe cificat ions for t he USB Inte lliHead. Figu re 1-2 shows the dimensi ons for the standa rd product. Table 1-1. Specif ications Reference Standards ISO 7810 and ISO 7811 and AAMVA* Power Input 5V from U SB bus Recording Method Two-frequency coherent phase (F 2F) Messa ...
-
Tyco 1529L - page 84
USB IntelliHead S wipe Reader 4 ...
-
Tyco 1529L - page 85
5 SECTION 2. IN STALLATION This section describes th e cable connection, the Windows Plug and Pla y Setup, an d the ph y sical mounting of the unit. USB CONNECTI ON Since the USB In telliHea d is supplied as an OEM product, the installation and system integration will be uniq ue for eac h applicat ion. The reade r module m ust be attache d to an ap ...
-
Tyco 1529L - page 86
USB IntelliHead S wipe Reader 6 ...
-
Tyco 1529L - page 87
7 SECTI ON 3. OPE R A TION C AR D RE AD A card may be swiped past the rea d head at an y time. The magnetic stripe must face toward the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB HID input report. After the r esults are ...
-
Tyco 1529L - page 88
USB IntelliHead S wipe Reader 8 ...
-
Tyco 1529L - page 89
9 SECT ION 4. USB C OMMUN IC ATIONS This device conforms to the USB specifi cation revisi on 1.1. This device also conforms with the Human Interface Device (H ID) class specification version 1.1. The device communicates to the host as a vendor-defined HID device. The details about how the card data and commands are structured into HID reports follo ...
-
Tyco 1529L - page 90
USB IntelliHead S wipe Reader 10 followin g table. The usage t ypes ar e also listed. These usage t ypes are de fined in the H ID Usage Tables document. Magnetic Strip e Reader usage page 0x ff00: Usage ID (Hex) Usage Name Usage Ty pe Report Ty pe 1 Decoding reader de vice Collection None 20 Track 1 decode status Data Input 21 Track 2 decode status ...
-
Tyco 1529L - page 91
Section 4. USB Communications 11 Item Val ue (Hex) Input (Data, Variabl e, Absolute, Buffered By tes) 82 0 2 01 Usage (Command message) 09 20 Report Count (24) 95 18 Feature (Dat a, Variable, Absolute, Buffered Bytes) B2 02 01 End Collection C0 C AR D D AT A Card dat a is only sent to the host on the Inter rupt In pipe usi ng a n Input Report. The ...
-
Tyco 1529L - page 92
USB IntelliHead S wipe Reader 12 TRACK 1 DEC ODE STATUS Bits 7-1 0 Value Reserved Error This is a one-byte value, which indicat es the statu s of decodin g track 1. B it positi on zero indicat es if there was an error decodin g track 1 if the bit is set to one. If it is zero, then no error occur red. If a track ha s data on it that is not noise , a ...
-
Tyco 1529L - page 93
Section 4. USB Communications 13 CA RD ENCO DE T Y PE This one-b y te value indicates the type of encodin g that was found o n the ca rd. The follow ing table defines the possible values. Value Encode T y pe Description 0 ISO/ABA ISO/ABA encode format 1 AAMVA AAMVA encode format 2 reserved 3 Blank The card is blank. 4 Other The card has a non-stand ...
-
Tyco 1529L - page 94
USB IntelliHead S wipe Reader 14 COMM ANDS Most ho st applica tions do not nee d to send command s to the de vice. Most host applicatio ns only need t o obtain car d data from the de vice as desc r ibe d previou sly in this sec tion. This section of t he manual can be i gnored by an yone who does not need to s end commands t o the device. Comman d ...
-
Tyco 1529L - page 95
Section 4. USB Communications 15 RESUL T CODE This one-b y te field conta ins the value of the resul t code. The re are two t ypes of result co des: generic result codes an d command-sp ecific result codes. Gen eric result codes alwa ys have the most significant bit set to zero. Generic result codes have the same meaning for all commands and can be ...
-
Tyco 1529L - page 96
USB IntelliHead S wipe Reader 16 Property ID is a one -byte field that co ntains a value t hat identifies the propert y. The foll owing table lists all the current propert y ID values: Value Propert y I D Descripti on 0 SOFTWARE_ID T he device’s software identifier 1 SERIAL_NUM The device’s seria l number 2 POLLING_INTERVAL The interrupt pipe? ...
-
Tyco 1529L - page 97
Section 4. USB Communications 17 SERIAL_NUM PROPERTY Propert y ID: 1 Property T y pe: String Le ngth: 0 – 15 byt es Get Propert y : Yes Set Propert y: Yes Default Value: The defaul t value is no string with a len gth of zero . Description: Th e value is an ASCII strin g that r epresents th e device’s serial numb er. T his stri ng ca n be 0 – ...
-
Tyco 1529L - page 98
USB IntelliHead S wipe Reader 18 rate decreases the USB bus bandwid th used by the device. This property is stored in no n-volat ile EEPROM memory so it will not c hange w hen the unit is power cycled. The val ue of this propert y, if any, will be sent to the host when the host requests the devi ce’s USB en dpoint desc riptor. W hen this propert ...
-
Tyco 1529L - page 99
Section 4. USB Communications 19 01 02 03 08 Example Set MAX_PACKET_ SIZE propert y Respons e (Hex): Result Code Data Len Data 00 00 Example Get MAX_PACKET_S IZE propert y Request (Hex ): Cmd Num Da ta Len P rp ID 00 01 03 Example Get MAX_PACKET_S IZE propert y Response (Hex ): Result Code D ata Len Prp Value 00 01 08 INTERFACE_TY PE PROPERTY Prope ...
-
Tyco 1529L - page 100
USB IntelliHead S wipe Reader 20 Result Code D ata Len Prp Value 00 01 00 ...
-
Tyco 1529L - page 101
21 SECTI ON 5. DEM O PROG RAM The demo p ro gram , which is wr itte n in V isua l Basi c, ca n be used t o do the following : • Read cards from the devi ce and view the card data • Send comma nd req uests to the device a nd v iew the com mand r esponse s • Guide appli cation develop ers in their appli cation devel opment b y providing exampl ...
-
Tyco 1529L - page 102
USB IntelliHead S wipe Reader 22 SOURC E C ODE Source co de is i ncluded with the d em o prog ram. I t can be used as a gui de for a pplication devel opment. I t is described in detail, with comme nts, to assist de velope rs. The book USB Complete by Jan Axelson is also a good guide for application developers, especiall y the chapter on Human Inter ...
-
Tyco 1529L - page 103
23 A PPENDIX A . USB INTE LLIHEAD SW IPE READER The f ollowing d rawi ng is provid ed in this se ction : Part Number Tit le 2103000 6 USB-HID INTHD 3TK 125MM W R E, 5P CONN ...
-
Tyco 1529L - page 104
ASM210300XX REV.X CONNECTOR MOLEX 51021-0500 TERMINAL MOLEX 50058-8000 P1 PIN1 440.0 +/- 6mm J1-2 WHITE J1-1RED GREEN J1-3 BLACK J1-4 SHIELD WIRE J1 COLOR SIGNAL P1 CONN 1 2 3 4 1 2 3 4 5 VBUS D - D + GND HEAD CASE RED WHITE GREEN BLACK SHELD USB HID 3-Trac k , 440mm Wire , 5PIN Connector PITCH=1.25mm ...
-
Tyco 1529L - page 105
iv FCC WAR NING STA TEMEN T T his equ ip ment has be en tes te d and foun d to com pl y wit h the l imits fo r Cla ss B digi tal device, pur suant to Part 15 of FCC Rule s. These limits are desig ned to p rovide reasona ble pro tect ion agai nst harmful inte r feren ce whe n the equ ipmen t is o perat ed in a re sid entia l envi ron ment. Thi s equ ...
-
Tyco 1529L - page 106
Preliminar y t o Rev 1 10/20/2004 7:30:02 AM USB I NTELLIHEAD KE YBO AR D EM UL AT IO N FOR SWIPE READERS TEC HNICA L REFERE NCE M A N UA L Manual P art Number 99875321-1P OCTOBER 20 04 PRELIMIN A R Y REGISTERED TO ISO 9001:2000 20725 South Annalee Avenue Carson, CA 90746 Phone: (310) 631-8602 FAX : ( 31 0) 63 1-3 95 6 Technical Support: (651) 41 5 ...
-
Tyco 1529L - page 107
ii Cop yright © 2004 MagTe k ® , In c. Printe d in the U nited S t ates of Americ a Informa t ion i n this docum ent is subje ct to change wi thout n otice. No part of this docum ent may be reproduced or transmit ted in any form or by any means, electronic or m echanical, for an y purpose , without th e express w ritten permission of M agTek, I n ...
-
Tyco 1529L - page 108
iii Limited Warranty M agTek , Inc. w arrants that the Produc t described in this docum ent is free of defect s in mater ials and workm anship for a period o f one ye ar from the d ate of purchase wher e th e da te of purch ase is def ined as the date of shipment from MagTek . During thi s warranty period , Mag Tek sha ll, at their optio n, repa ir ...
-
Tyco 1529L - page 109
v TABLE OF CO NTENT S SECT ION 1 . FEA TURES A ND SP ECIFICAT I ONS ...... ........ ......... ........ ......... ..... ........ ......... ........ ........ ... 1 FEATU RES . ........ ......... ........ ........ ......... ..... ......... ........ ........ ......... ........ ........ ......... ........ ...... ........ ........ 1 HARD W ARE CONF I GUR ...
-
Tyco 1529L - page 110
vi Figure 1-1. 3-Trac k USB Keyboard E mulation IntelliHead ...
-
Tyco 1529L - page 111
1 SECTI ON 1. FEA TURES AND S PEC IFICA TIONS The USB (U niversal Serial Bus), HID Keyboard Emulatio n, Swipe Reade r is a compact magnetic s tripe card re ader, which con forms to ISO standards. The Read er is compatible with the PC series of personal computers and emulates the operation of a keyboard. A card is read by sliding it p ast the h ead ...
-
Tyco 1529L - page 112
USB HID Keyboard Emulation Swipe Reader 2 The hardwa r e c onfigura t ions a re shown in Table 1-1. Table 1 -1. Configurat ions ACCESS ORIES The accessories are as follows: Part Number Descripti on 21042806 U SB MSR Demo Program with Source Code (Diskette) 99510026 U SB MSR Demo Program with Source Code (WEB) REFERENCE DOCUMEN TS MagTe k Magnetic C ...
-
Tyco 1529L - page 113
Section 1. F eatures and Specifications 3 SPECIFICAT IONS Table 1-2 lists the spe cificat ions for t he USB Inte lliHead. Figu re 1-2 shows the dimensi ons for the stand ard pr oduct. Table 1-2. Specif ications Reference Standards ISO 7810 and ISO 7811 and AAMVA* Power Input 5V From USB bus Recording Method Two-frequency coherent phase (F 2F) Messa ...
-
Tyco 1529L - page 114
USB HID Keyboard Emulation Swipe Reader 4 ...
-
Tyco 1529L - page 115
5 SECTION 2. IN STALLATION This section describes th e cable connection, the Windows Plug and Pla y Setup, an d the ph y sical mounting of the unit. USB CONNECTI ON Since the USB In telliHea d is supplied as an OEM product, the installation and system integration will be uniq ue for eac h applicat ion. The reade r module m ust be attache d to an ap ...
-
Tyco 1529L - page 116
USB HID Keyboard Emulation Swipe Reader 6 ...
-
Tyco 1529L - page 117
7 SECTI ON 3. OPE R A TION C AR D RE AD A card may be swiped past the rea d head at an y time. The magnetic stripe must face toward the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB HID input report. After the results are s ...
-
Tyco 1529L - page 118
USB HID Keyboard Emulation Swipe Reader 8 ...
-
Tyco 1529L - page 119
9 SECT ION 4. USB C OMMUN IC ATIONS This device conforms to the USB specifi cation revisio n 1.1. This device also conforms with the Human Interface Device (H ID) class specification version 1.1. The device communicates to the host as a H ID ke yboard device. The l atest versio ns of t he Windows oper ating s ystems come with a standard Windows USB ...
-
Tyco 1529L - page 120
USB HID Keyboard Emulation Swipe Reader 10 MSR ( Non-Keybo ard Emula tion V ersion) . Plea se refer to Tec hnica l Manual 99875 320 for further information regarding the USB IntelliHead HID reader. The device’s programmab le configuration o ptions affe ct the format o f the card data. The card data fo rmat for t he default conf iguration is as fo ...
-
Tyco 1529L - page 121
Section 4. USB Communications 11 PROGR A M M ABLE CONFI GURATION OPTIONS This device h as a numb er of pro grammable confi guration properti es. These properties a re stored in non-vol atile EE PROM memory . T hese pr operties can be configu red at the fac tory or by the end user using a pr ogram supplied by MagTek . Pro g ramming these para meters ...
-
Tyco 1529L - page 122
USB HID Keyboard Emulation Swipe Reader 12 REPOR T DESCRIPTOR The HID report des cript or i s struc tured as follo ws: Item Val ue(Hex) Usage Page (Generic Desktop) 05 01 Usage (Keyboard) 09 06 Collection (Application) A1 01 Usage Page (Key Codes) 05 07 Usage Minimum (224) 19 E0 Usage Maximum (231) 29 E7 Logical Minimum (0) 15 00 Logical Maximum (1 ...
-
Tyco 1529L - page 123
Section 4. USB Communications 13 COMM ANDS Comman d re quests an d respon ses are se nt to a nd rec eive d from the device using featu re re ports. Command requ ests are sent to the device usi ng the H ID class sp ecific request Set_Report. Th e response to a command i s retrieved from the devi ce using th e HID class s pecific r equest Get_Report. ...
-
Tyco 1529L - page 124
USB HID Keyboard Emulation Swipe Reader 14 RESUL T CODE This one-b y te field conta ins the value of the resul t code. The re are two t ypes of result co des: generic result codes an d command-sp ecific result codes. Gen eric result codes alwa ys have the most significant bit set to zero. Generic result codes have the same meaning for all commands ...
-
Tyco 1529L - page 125
Section 4. USB Communications 15 Property ID is a one -byte field that co ntains a value t hat identifies the propert y. The foll owing table lists all the current propert y ID values: Value Prop ert y ID Description 0 SOFTWARE_ID The device’s software identifier 1 SERIAL_NUM The device’s serial number 2 POLLING_INTERVAL The interrupt pipe’s ...
-
Tyco 1529L - page 126
USB HID Keyboard Emulation Swipe Reader 16 SERIAL_NUM PROPERTY Propert y ID: 1 Property T y pe: String Le ngth: 0 – 15 byt es Get Propert y : Yes Set Propert y: Yes Default Value: The defaul t value is no string with a len gth of zero . Description: Th e value is an ASCII strin g that r epresents th e device’s serial numb er. T his stri ng ca n ...
-
Tyco 1529L - page 127
Section 4. USB Communications 17 bus bandwidt h used b y the device, and slowin g down the card d ata transfer rate decreases the USB bus bandwid th used by the device. This property is stored in no n-volat ile EEPROM memory so it will not c hange w hen the unit is power cycled. The value of this propert y, if an y, will be sent to the host when th ...
-
Tyco 1529L - page 128
USB HID Keyboard Emulation Swipe Reader 18 TRACK_DATA_ SEND_FLAGS PROPERTY Propert y ID: 4 Propert y T y pe: B y te L eng th: 1 by te Get Propert y : Yes Set Propert y: Yes Default Value: 63 (hex ) Description: Th is propert y is defined as follows: 0 SS ES LRC 0 LC Er Er SS 0 – Don’t send Start Sentinel for each tr ack 1– Send Start Sen tine ...
-
Tyco 1529L - page 129
Section 4. USB Communications 19 TERMI NAT I ON_CH AR PROPERTY Propert y ID: 5 Propert y T y pe: B y te L eng th: 1 by te Get Propert y : Yes Set Propert y: Yes Default Va lue: 0D (hex ) (ca rriage ret urn) Description: Th is propert y is defined as follows: mod c c c c c c c mod 0 – Send c after card dat a 1– Se nd c aft er e ach t rack c 1-12 ...
-
Tyco 1529L - page 130
USB HID Keyboard Emulation Swipe Reader 20 SS_TK3_ISO_A BA PROPERTY Propert y ID: 8 Propert y T y pe: B y te L eng th: 1 by te Get Propert y : Yes Set Propert y: Yes Default Value: 2B (hex) ‘+’ Description: This chara cter is sent as the trac k 3 start sentinel f or cards that h ave track 3 encoded in ISO/ABA f ormat. If the v alue is 0 n o cha ...
-
Tyco 1529L - page 131
Section 4. USB Communications 21 This propert y is stored i n non-volati le EEPROM memor y so it will not chan ge when the uni t is power cycled. When this propert y is changed, the unit must be power c y cled to have these changes tak e effect. If a value other th an the def ault valu e is desired, it can be set by the facto ry upon requ est. PRE_ ...
-
Tyco 1529L - page 132
USB HID Keyboard Emulation Swipe Reader 22 PRE_TK_CHAR PROPERTY Propert y ID: 13 (0D hex) Propert y T y pe: B y te Len g th: 1 b yt e Get Propert y : Yes Set Propert y: Yes Default Value: 0 Description: This chara cter is sent pri or to the d ata for each track. If the v alue is 0 no character is sen t. If t he value is in the ran ge 1 – 127 th e ...
-
Tyco 1529L - page 133
Section 4. USB Communications 23 accord in g to a Uni ted S tat es ke yboar d ke ymap. For exa mple, to t rans mit t he ASCII character ‘?’ (063 decimal), the character is looked up in a keymap. For a United States keyboar d key map, th e ‘/’ (forwar d sla sh) key combined with the left shift key modifier are stored in the keymap to represe ...
-
Tyco 1529L - page 134
USB HID Keyboard Emulation Swipe Reader 24 Description: The value is a b yte that represents th e devices int erface t ype. The value ca n be set to 0 fo r the HID inter face or to 1 for the keyboa rd emula tion inter face. When the value is set to 0 (HID) the device will behave as described in the HID man ual. When th e val ue is set to 1 (ke yboa ...
-
Tyco 1529L - page 135
25 SECTI ON 5. DEM O PROG RAM The purp ose of th is demo progr am is not to dem onstrate card reading with this HI D keyboard emulation device. Use a tex t editor application such as Windows Notepad to demonstrate card read ing fo r this HID keyb oard emulation de vice. Any applic ation that allows u ser i nput from a keybo ard s houl d be suf fi c ...
-
Tyco 1529L - page 136
USB HID Keyboard Emulation Swipe Reader 26 • Enter a command in the Message edit box. All data entered should be in hexadecimal bytes with a space between each b y te. Enter the command number followed by the command data if there is any. The appli cation will automatic ally calculate and send the command dat a leng th for y ou. F o r e xample, t ...
-
Tyco 1529L - page 137
27 A PPENDIX A . USB INTE LLIHEAD SW IPE READER The f ollowing d rawi ng is provid ed in this se ction : Part Number Tit le 2103000 7 USB- KB INTHD 3T K 125M M WRE, 5P CONN ...
-
Tyco 1529L - page 138
ASM210300XX REV.X CONNECTOR MOLEX 51021-0500 TERMINAL MOLEX 50058-8000 P1 PIN1 440.0 +/- 6mm J1-2 WHITE J1-1RED GREEN J1-3 BLACK J1-4 SHIELD WIRE J1 COLOR SIGNAL P1 CONN 1 2 3 4 1 2 3 4 5 VBUS D - D + GND HEAD CASE RED WHITE GREEN BLACK SHELD USB HID 3-Trac k , 440mm Wire , 5PIN Connector PITCH=1.25mm ...
-
Tyco 1529L - page 139
INSTALLATION GUIDE LD9000U series User Manual available at our web site www.logicc ontrols.com USB Interface Customer Pole Displays LD9000U, LD9200U, LD9 300U, LD9400U, LD9500U, LD9900U, LD9000XU, LD9200XU, LD93 00XU, LD9400XU, LD9500XU an d LD9900XU HARDWARE INSTALLATION Your LD9000U family of pole displays has been pre-assembled to make the insta ...
-
Tyco 1529L - page 140
Logic Controls, Inc. SOFTWARE COMMANDS Logic Controls pol e displays ar e controlled by command codes and data from the compu ter. Commands are transmitted to t he pole display as ASCII codes. The com mand codes listed b elow are expr essed in hexadecimal (base 16) numbers encl osed inside angle brackets < >, in decimal numbers encl osed in p ...
-
Tyco 1529L - page 141
i Customer Displays 2 by 20 character display USER MANUAL Models: LD9000 Series ...
-
Tyco 1529L - page 142
ii NOTICE The manufacturer of the POS pole display makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages. Information in this document is subject t ...
-
Tyco 1529L - page 143
iii TABLE OF CONTENTS FEATURES ..................................................................................... 1 MODEL IDENTIFICATION ............................................................ 2 CARTON CONTENTS ................................................................... 2 INSTALLATION ................................................ ...
-
Tyco 1529L - page 144
1 FEATURES The LD9000 family of pole displays offers a wide range of high quality features and models to choice from. Listed below are the features incorporated into each pole display. Not all features are available in all models. The model identification chart will assist you in selecting the model best suited to your needs. Features - All Models ...
-
Tyco 1529L - page 145
2 MODEL IDENTIFICATION LD9 __ __ __ - __ __ X = Double Sided Display PT = Pass Thru 25 = DB25F connector to computer POWER ADAPTER 0 = 120VAC* COMMAND SET 1 = 220VAC 0 = LOGIC CONTROLS* 1 = LOGIC CONTROLS SERIAL/PARALLEL INTERFACE WITH PASS-THRU 0 = SERIAL 9600 BAUD* 2 = SPECIAL COMMAND SET 1 ( Aedex emulation) 1 = SERIAL 600 BAUD 3 = SEPCIAL COMMA ...
-
Tyco 1529L - page 146
3 INSTALLATION Your PD9000 family of pole displays has been pre-assembled to make the installation as simple as possible. Serial Interface Non-pass-thru Models Installation 1. Mount the pole display to the metal base plate using the mounting hardware provided. 2. The pole display can be used in a freestanding mode or attached to the counter using t ...
-
Tyco 1529L - page 147
4 Serial Interface Pass-thru Models Installation 1 Mount the pole display to the metal base plate using the mounting hardware provided. 2 The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware. 3 Connect the DB25M connector to the peripheral device or a serial pass-thru terminator (optio ...
-
Tyco 1529L - page 148
5 FUNCTIONAL TEST The following test sequence will verify that your pole display is working properly. Before you start this procedure, you must install the pole display correctly as outlined under the INSTALLATION section. The functional test should be done under MSDOS command prompt by booting up the computer in DOS mode, or shell out to DOS promp ...
-
Tyco 1529L - page 149
6 LD9100-PT, LD9300-PT, LD9400-PT and LD9500-PT 1. Type “ABCDEFGH” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ ^A PASSTHRU” ( ^A is entered as Ctrl-A ) and press ENTER key. The data will be passed through to the peripheral (e.g. a printer). These characters are not shown on the display. 3. Type “ ...
-
Tyco 1529L - page 150
7 LD9190-PT, LD9390-PT, LD9490-PT and LD9590-PT 1. Type “ECHO ABCDEFGH>LPT1” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ECHO ^A PASSTHRU>LPT1” ( ^A is entered as Ctrl-A) and press ENTER key. The data will be passed through to the peripheral (e.g. a printer). These characters are not shown on ...
-
Tyco 1529L - page 151
8 INTERFACE CONNECTION Serial Interface Connector Configuration The pin out configuration for the standard serial pole display is a DB9F connector. It plugs directly into the serial port of the computer. 1. DCD (tied to pins 4&6) 2. NC 3. TXD from PC 4. DTR (tied to pins 1&6) 5. Ground 6. DSR (tied to pins 1&4) 7. RTS (tied to pin 8) 8. ...
-
Tyco 1529L - page 152
9 Parallel Interface Connector Configuration All standard parallel pole displays will have a DB25 male connector. It is connected to the printer port of the computer. 1. –Strobe 2. Data 0 3. Data 1 4. Data 2 5. Data 3 6. Data 4 7. Data 5 8. Data 6 9. Data 7 10. – Ack 11. Busy 12-17 NC 18-25 Ground For pass-through models, the display cable come ...
-
Tyco 1529L - page 153
10 SOFTWARE COMMANDS Logic Controls pole displays are controlled by command codes and data from the computer. The model of pole display that you have will determine which command set works with your pole. Refer to the model identification chart for further information. Commands are transmitted to the pole display as ASCII codes. The command codes l ...
-
Tyco 1529L - page 154
11 7. Carriage R eturn <0D>, (13), {^M}: The cursor moves to the left most digit of the row it is in. 8. Digit Select <10>, (16), {^P}: Moves the cursor to any position on the display with this command followed by a data byte of <00> to <27>, or in decimal (00) to (39). 9. Cursor On <13>, (19), {^S}: Turns on the curso ...
-
Tyco 1529L - page 155
12 17. Both Side Display <1B><0C>, (27)(12), {^[ ]{^L}: After this command, all messages followed are displayed on both sides of double sided displays. 18. Front Sid e Display <1B><0E>, (27)(14), {^[ ]{^N}: After this command, all messages followed are displayed only on front side of double sided displays. 19. Back Side Disp ...
-
Tyco 1529L - page 156
13 PASS-THRU COMMAND SET (LD9100-PT, LD9100X-PT): All software commands of the non-pass-thru single sided model are available with following additional commands for pass-thru and double-sided display control. When power is turned on or after a reset command has been initiated, all text is displayed on the pole display. Extended Pass-thru Command Se ...
-
Tyco 1529L - page 157
14 HARDWARE CONFIGURATION Serial pole displays were factory configured for serial RS232C interface using the following protocol: · 9600 Baud Rate · 8 Data Bits · 1 Stop Bit · No Parity Other optional baud rates are available with factory settings. Refer to the model identification chart for further information. ...
-
Tyco 1529L - page 158
15 DISPLAY CHARACTER CODES D7 0 0 0 0 0 0 0 0 D6 0 0 0 0 1 1 1 1 D5 0 0 1 1 0 0 1 1 D4 0 1 0 1 0 1 0 1 D 3 D 2 D 1 D 0 0 1 2 3 4 5 6 7 0000 0 DP SP 0 @ P ‘ p 0001 1 DC 1 ! 1 A Q a q 0010 2 DC 2 " 2 B R b r 0011 3 DL DC 3 # 3 C S c s 0100 4 DI M DC 4 $ 4 D T d t 0101 5 MS % 5 E U e u 0110 6 & 6 F V f v 0111 7 ’ 7 G W g w 1000 8 BS ( 8 H ...
-
Tyco 1529L - page 159
16 GENERAL SPECIFICATIONS LD9000 LD900X OPTICAL: Number of rows 2 2 x 2 sides Number of digits/row 20 20 Dot matrix 5 x 7 5 x 7 Digit height) 0.374in. (9.5mm) 0.374in. (9.5mm) Digit width 0.244in. (6.2mm) 0.244in. (6.2mm) Character config. ASCII ASCII Brightness (typical) 900 cd/m 2 900 cd/m 2 Display color Blue-Green Blue-Green MTBF (hours) 300,00 ...
-
Tyco 1529L - page 160
SecuGen _______________________________________________________ Products -1 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 General Description FDU02 is a Fingerprint Capture Device that supports the U SB (Universal Serial Bus) interface and can do hot attachment, Plug & Play and alternate funct ...
-
Tyco 1529L - page 161
SecuGen _______________________________________________________ Products -2 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Theory of Operation The USB host initiates the communication with the FDU02 using operation commands. Fingerprint data are then captured by the CMOS sensor a t a total image si ...
-
Tyco 1529L - page 162
SecuGen _______________________________________________________ Products -3 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 ♦ Support s both fingerprint optic recognition and mouse function ...
-
Tyco 1529L - page 163
SecuGen _______________________________________________________ Products -4 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Connector Pin Description Name No States Description GN D 1 Power Sensor Ground CLK 2 Input Sensor Clock SD AT A 0 3 Output Sensor Data0 SD AT A 1 4 Output Sensor Data1 SDATA2 ...
-
Tyco 1529L - page 164
SecuGen _______________________________________________________ Products -5 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Outline Dimension ♦ FDU02AI ...
-
Tyco 1529L - page 165
SecuGen _______________________________________________________ Products -6 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 OPP02M PCB Dimensions ...
-
Tyco 1529L - page 166
SecuGen _______________________________________________________ Products -7 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Mechanical Dimensions(OPP02 M) Optical Specification Hardness of prism surface 750Hk Resolution 500 ± 10 PPI Effective Sensing Area 12 .7mm ( x ) x 14.9mm ( y ) Effective Pixe ...
-
Tyco 1529L - page 167
SecuGen _______________________________________________________ Products -8 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Mounting ♦ Cable connection (Between USB interface and Sensor) FDU02AI USB interface board (FDU0 2AI) is cable- connected to the F ingerpr int Sensor b y a 9- pin cable conne ...
-
Tyco 1529L - page 168
SecuGen _______________________________________________________ Products -9 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 ♦ Mouse C onnection (Between USB interface and PS/2 mouse) ...
-
Tyco 1529L - page 169
SecuGen _______________________________________________________ Products -1 0 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Application ♦ SecuGen Hamster III (HFDU02A) SecuGen Hamster I I I is the name of SecuGen’ s fingerprint recognition PC peripheral device that uses the FDU02. Using this d ...
Do you have a question concerning Tyco 1529L?
Use the form below
If you did not solve your problem by using a manual Tyco 1529L, ask a question using the form below. If a user had a similar problem with Tyco 1529L it is likely that he will want to share the way to solve it.