-
Zanussi ZDF 204 - page 1
User manual Dishwasher ZDF 204 ...
-
Zanussi ZDF 204 - page 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of ...
-
Zanussi ZDF 204 - page 3
Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the appliance are thoroughly familiar with its opera- ti ...
-
Zanussi ZDF 204 - page 4
Installation • Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • All packaging must be removed before use. • Any electrical and pl umbing work required to install this appliance must be carried out by a qualified and competent person. • For safety reas ...
-
Zanussi ZDF 204 - page 5
Programme selector dial and On/Off sw itch • when in this position, the mach ine is switche d off (correspondi ng light off), • when the mar ker on the dial correspond s with a programme, the machine is s witched on and a pro- gramme is sele cted (programme s elector indicat or light on) Start/cancel button • Starting the washing programme: 1 ...
-
Zanussi ZDF 204 - page 6
Indicator lights Salt refilling Illuminates wh en special salt nee ds to be filled. It can remain ill uminated several hours after the salt has been fil led. Washing programmes Programme Half load Degree of soil Type of load Programme de- scription Intensive 70° Yes 1) Heavy soi l Crockery, cutle ry, pots and pans Prewash Main wash 2 intermediate ...
-
Zanussi ZDF 204 - page 7
Programme Half load Degree of soil Type of load Programme de- scription Rinse and Hol d No Any. Partial load (to be completed later i n the day). 1 cold rinse (to avoid food scra ps from sticking together). This programme does not require the use of detergen t. 1) When the Half load button is pressed, the prewash phase will be automatically excl ud ...
-
Zanussi ZDF 204 - page 8
– Fill up the salt and rinse aid container. – Adjust the water hardness setting to the highest level and perform 1 normal washing programme without loading any dishes. – Adjust the water hardness setting according to the hardness of the water in your area. – Adjust the rinse aid dosage Set the water softener The dishwasher is equipped with ...
-
Zanussi ZDF 204 - page 9
Setting the water soften er manually (see table) Set switch to position 1 or 2 The water softener i s factory set at po sition 2. Setting the water softener el ectronically (see table) The water softener is facto ry set at posi tion 5. The dishwasher m ust be switched of f . Press and hold th e start/cancel button and turn the programme sel ector d ...
-
Zanussi ZDF 204 - page 10
Unscrew the ca p. Only before filling with salt for the first time , fill the sal t container wit h wa- ter. Using the fu nnel provide d, pour in the sa lt until the container is fille d with salt. Remove any trace of salt. Replace the c ap tightly turning it clockwise unt il it stops with a click. IMPORTANT! Immediat ely start a co mplete programm ...
-
Zanussi ZDF 204 - page 11
Filling with rinse aid Open the li d. Fill up with rinse ai d. The maximum leve l for filling is indicat ed by "max" Clean up any ri nse aid which overflows. Clos e the lid and p ress until it locks. Top up the rins e aid indica- tor ( B ) become s clear CAUTION! Never fill the rin se aid dispense r with any other su bstances (e.g. dish w ...
-
Zanussi ZDF 204 - page 12
Open the li d. Set the dosage le vel. (The dose is factor y set in po- sition 4). Close the li d and press un- til it locks. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you should: – Remove all left over food and debris. – Soften re ...
-
Zanussi ZDF 204 - page 13
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden , horn, china or mother-of- pearls handle s. • Plastic items th at are not heat resistant. • Older cutlery with glued parts tha t are not tempera- ture resistant. • Bonded cutlery items or dishes. • Pewter or ...
-
Zanussi ZDF 204 - page 14
Load upper ba sket. Light items (plastic bowls etc.) must be lo aded in the up - per basket and arrang ed so they do no t move. For taller items, th e cup racks can b e folded up- wards. If plates are to be loaded in the upper basket: load them starting from the rea r positions; tilting the m slightly forwards and avoiding the front positions ne ar ...
-
Zanussi ZDF 204 - page 15
Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and stor- age recommendations. Open the li d. Fill in the deter gent in compartment A . Observe the dosing lev- els. For programmes with pre- wash add an additional detergent do se in com- partment B . When using deterg ent tablets : place ...
-
Zanussi ZDF 204 - page 16
• Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. CAUTION! When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off. Care and cleaning Cleaning the filters IMPORTANT! NEVER use the dishwasher without ...
-
Zanussi ZDF 204 - page 17
Cleaning the spray arms NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or so ...
-
Zanussi ZDF 204 - page 18
CAUTION! When a unit is no longer being used: • Pull the plug out of the socket. • Cut off the cable and plug and dispose of them. • Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives. The symbol on the product or on its pack- aging indicates that this product may not be treated as ho ...
-
Zanussi ZDF 204 - page 19
Fault code and malfunction Possible cause and solution • continuo us flashing of the start/cancel indicator light • 3 flashes of th e end of programme indic ator light • Anti-flood device is activate d Close the water ta p and contact your l ocal Service Force Center. • The program me does not start • The dish washer’s door has n ot bee ...
-
Zanussi ZDF 204 - page 20
The wash results ar e not satisfactory The dishes ar e not clean • The wrong wash ing programme h as been select ed. • The dish es are arranged in su ch a way as to st op water reaching all pa rts of the surface. The baskets must not be ov erloaded. • The spray arm s do not rota te freely due to incorrect arrangement of the load. • The filt ...
-
Zanussi ZDF 204 - page 21
Noise level dB(A) 51 Consumption values The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var- iations of the power supply and the amount of dishes. Consumption values Programme Programme duration (in minutes) Energy consumption (in kWh) Water (litres) Intensive 70° 85-95 1, ...
-
Zanussi ZDF 204 - page 22
Upper basket Cutlery bask et L ower basket cup racks: position A Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection WARNING! The dishwasher must not be connected to open water appliances or instantaneous ...
-
Zanussi ZDF 204 - page 23
Inlet hose Connect the inlet hose to a water tap with an exte rnal thread of 3/4”. The inlet hose can be turned eith er to the left or th e right to suit the installa tion by means of the locknut. The locknut must b e correctly fitted to avoid water leaks. Drain hose Connect dra in hose to the sink. Required heig ht: 30 to 100 cm above botto m of ...
-
Zanussi ZDF 204 - page 24
Electrical connection CAUTION! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plu ...
-
Zanussi ZDF 204 - page 25
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the ap- pliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed, the appliance guarantee will move with you subject to the following qual ...
-
Zanussi ZDF 204 - page 26
Hellas +30 23 10 56 19 70 4, Limnou Str., 54627 Thes saloniki Hrvatska +385 1 6 3 23 338 Slavonska a venija 3, 10000 Zagre b Ireland +353 1 40 90 753 Long Mile Ro ad Dublin 12 Italia +39 (0) 434 5585 00 C.so Lino Zan ussi, 26 - 33080 Por- cia (PN) Latvija +37 17 84 59 34 Kr. Barona iela 13 0/2, LV-1012, Riga Lietuva +370 5 278 06 03 Ozo 10a, LT-0 8 ...
-
Zanussi ZDF 204 - page 27
Україна +380 44 586 2 0 60 0407 4 Київ , вул . Автозаводська , 2 а , БЦ " Алкон " 27 ...
-
Zanussi ZDF 204 - page 28
www.electrolux.com 156990920-00 -022008 ...
Do you have a question concerning Zanussi ZDF 204?
Use the form below
If you did not solve your problem by using a manual Zanussi ZDF 204, ask a question using the form below. If a user had a similar problem with Zanussi ZDF 204 it is likely that he will want to share the way to solve it.