English dropdown-ico

Manual Dakota Digital CMD-4000

6 pages 0.09 mb
Download

Go to site of 6

Summary
  • Dakota Digital CMD-4000 - page 1

    CMD-4000 SERIES REV. A 4+ FUNCTION REMOTE CONTROL DOOR LATCH OPENER SYSTEM INTRODUCTION Thank you for purchasing the CMD-4000 series Remote Control Door Latch Opener System from Dakota Digital, Inc. This, along with many other products that Dakota Digital, Inc. has to offer, represents the latest in electronics technology for the street rod, classi ...

  • Dakota Digital CMD-4000 - page 2

    2 WIRING HARNESS COLOR CODE. 10 pin connector RED constant 12 volt battery source BLACK chassis ground YELLOW ignition key switched 12 volts VIOLET CHANNEL 7 relay (optional) WHITE/BLACK CHANNEL 6 relay (optional) BLUE CHANNEL 5 relay (optional) BROWN CHANNEL 4 relay (optional) ORANGE CHANNEL 3 relay (optional) GRAY not used GREEN not used 5 spade ...

  • Dakota Digital CMD-4000 - page 3

    The only wires that need to be passed to the doors are the two wires running to each door motor. This should be done using a flexible rubber t ube or rubber grommet to protect the wires, or by using the optional DAKOTA DIGITAL, INC. MAGNUM SHOOTERS. MAGNUM SHOOTERS will eliminate the wires running through the door jamb s entirely for the cleanest a ...

  • Dakota Digital CMD-4000 - page 4

    GREEN CHANNEL 2 RED: +12 BATTERY OUTSIDE EMERGENCY RELEASE SWITCH DRIVER'S DOOR MOTOR (PDR-1 shown) +12 BATTERY RED FUSE BROWN CHANNEL 1 GROUND GROUND GREEN BLUE SPLICE SPLICE BLACK These channe ls must be connec ted to relays if they are used. YELLOW: IGNITION safety disable BLACK: GR O UND PURPLE BROWN WHITE/B LACK BLUE CHANNEL 4 CHANNEL 5 C ...

  • Dakota Digital CMD-4000 - page 5

    DIP SWITCH SETTINGS For optimal performance, all switches should be in the “O FF” position. If any switches are in the “ON” position damage or incorrect operation may occur to the attached components. TRANSMITTER PROGRAMMING All of the transmitters to be programmed into the syst em should be available. This sequence will erase any previousl ...

  • Dakota Digital CMD-4000 - page 6

    TROUBLE SHOOTING GUIDE Symptom Possible Problem Solution ---------------------------------------------------------------------------------------------------------------------------------------------------- System will not operate doors Receiver is not getting Check 12 volt connection. or trunk (LED does not flash). power. Check ground connection. C ...

Manufacturer Dakota Digital Category Home Security System

Documents that we receive from a manufacturer of a Dakota Digital CMD-4000 can be divided into several groups. They are, among others:
- Dakota Digital technical drawings
- CMD-4000 manuals
- Dakota Digital product data sheets
- information booklets
- or energy labels Dakota Digital CMD-4000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dakota Digital CMD-4000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dakota Digital CMD-4000, service manual, brief instructions and user manuals Dakota Digital CMD-4000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dakota Digital CMD-4000.

Similar manuals

A complete manual for the device Dakota Digital CMD-4000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dakota Digital CMD-4000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dakota Digital CMD-4000.

A complete Dakota Digital manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dakota Digital CMD-4000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dakota Digital CMD-4000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dakota Digital CMD-4000, that we can find in the current document
3. Tips how to use the basic functions of the device Dakota Digital CMD-4000 - which should help us in our first steps of using Dakota Digital CMD-4000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dakota Digital CMD-4000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dakota Digital CMD-4000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dakota Digital CMD-4000?

Use the form below

If you did not solve your problem by using a manual Dakota Digital CMD-4000, ask a question using the form below. If a user had a similar problem with Dakota Digital CMD-4000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)