English dropdown-ico

Manual White RB650

20 pages 1.9 mb
Download

Go to site of 20

Summary
  • White RB650 - page 1

    IMPOR TANT: READ SAFETY RULES AND INSTRUCTIONS CAREFUL LY WHITE OUTDOOR PRODUCTS COM PANY P .O. BOX 361131 CLEVELAND, OHIO 44136-9722 REAR TINE TILLER MODEL RB650 21A-458B190 PRINTED IN U.S.A. FORM NO.770-10193 Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-c ...

  • White RB650 - page 2

    2 SECTION 1: FINDING YOUR MODEL NUMBER This Operator’s Manual is an important part of your new tiller. It will help you assemble, prepare and maintain your tiller. Please read and understand what it says. Before you start to prepare your tiller for its first use, please locate the model plate and copy the information from it in this Operator’s ...

  • White RB650 - page 3

    3 SECTION 3: IMPORTANT SAFE OPERATION PRACTICES WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR TILLER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESUL ...

  • White RB650 - page 4

    4 • Only use accessories approved for this machine by the manufacturer. Read, understand, and follow all instructions provided with the approved accessory. • If situations occur which are not covered by this manual, use care and good judgment. Contact your dealer for assistance. 2. CHILDREN • Tragic accidents can occur if the operator is not ...

  • White RB650 - page 5

    5 SECTION 4: LOOSE PARTS Handle Assembly Depth Stake Assembly Control Rod NOTE: Cable tie not shown. ...

  • White RB650 - page 6

    6 SECTION 5: ASSEMBLY INSTRUCTIONS IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel and engine oil recommendations. NOTE: Left and right is determined from the operator’s position, standing behind the tiller. TOOLS REQUIRED FOR ASSEMB LY Adjustable Wrenches Pair of Pliers TO REM O ...

  • White RB650 - page 7

    7 Figure 5 ATTACHING THE CLUTCH CABLE Attach the clutch cable to the handle as follows (be careful not to kink the cable). 1. Route the clutch cable to the left side of the tiller, and underneath the handle. Remove one hex nut and lock washer from the end of the casing on the clutch cable. Thread the other nut all the way onto the threaded casing, ...

  • White RB650 - page 8

    8 Position the tiller so the front counterweight is against a solid object, such as a wall. With the gear selection lever in NEUTRAL, start the engine. Refer to the separate engine manual. Standing on the right side of the tiller, examine the belt (inside the belt cover). It should not be turning. NOTE: Do not put fingers under the belt cover. If t ...

  • White RB650 - page 9

    9 DEPTH S TAKE The depth bar controls the tilling depth. Refer to SECTION 8: HOW TO USE YOUR TILLER on page 9. HANDLE ADJUSTMENT (See Figure 8) The handle may be adjusted to be raised or lowered in line with the tiller. To adjust the handle position loosen the handle height adjustment crank a few turns. Pivot handle up or down to desired position. ...

  • White RB650 - page 10

    10 Figure 9 4. To transport tiller, lower the depth stake (use top adjustment hole). 5. To adjust the depth stake, remove the clevis pin and hairpin clip. See Figure 9. Move the depth stake to the desired setting. 6. To adjust the side shields, remove the wing nuts. See Figure 10. Place side shield in position desired. Replace wing nuts and tighten ...

  • White RB650 - page 11

    11 To adjust the tension on the belt, refer to clutch adjustment information in “Checking the Clutch Adjustment” section of the Assembly Instructions. After belt tension has been adjusted, if the belt is excessively stretched, you may need to adjust the idler pulley rod. This can easily be checked. With the engine off and the clutch control bai ...

  • White RB650 - page 12

    12 BE LT REPLACEMENT CAUTION: Do not use an off-the-shelf belt. Your tiller has been engineered with a belt made of special material (Kevlar Tensile) for longer life and better performance. It should not be replaced with an off-the-shelf belt. If belt replacement is required, order belt or belts by part number from your nearest authorized dealer. P ...

  • White RB650 - page 13

    13 SECTION 12: OFF-SEASON STORAGE If the tiller will not be used for a period longer than 30 days, the following steps should be taken to prepare the tiller for storage. 1. Clean the exterior of engine and the entire tiller thoroughly. Lubricate the tiller as described in the lubrication instructions. 2. Refer to the engine manual for correct engin ...

  • White RB650 - page 14

    14 Model 458 ...

  • White RB650 - page 15

    15 Model 458 RE F . NO. PART NO. DESCRIPTION 1 611-0020 Wheel Shaft Ass’y: 33T 2 611-0021 Tine Shaft Ass’y: 18T 3 611-0128 Jack Shaft Ass’y 4 611-0129 Input Shaft Ass’y 5 617-0058 Re v . Idler Gear Ass’y: 30T 6 617-0059 Ftine Idler Gear Ass’y: 30T 7 617-0060 Tine Input Sprocket Ass’y: 9T 8 617-0061 Wheel Input Sprocket Ass’y: 10T 9 ...

  • White RB650 - page 16

    16 Model 458 12 15 12 12 22 2 60 61 5 17 19 1 60 61 11 6 16 14 4 9 3 7 20 8 18 10 23 37 34 62 25 27 64 30 39 26 63 32 36 33 31 27 29 26 41 42 46 44 49 44 26 40 30 24 35 28 21 50 59 58 51 65 53 55 56 54 57 30 38 ...

  • White RB650 - page 17

    17 Model 458 RE F . NO. PART NO. DESCRIPTION 1 747-1152 Shift Rod 2 649-0033 Upper Handle Ass’y 3 649-0034 Lower Handle Ass’y 4 710-3005 Hex Screw 3/8-16 x 1.25 5 710-3056 Hex Screw 5/16-18 x 3.25 6 711-0415 Clevis Pin 3/8-1.62 7 712-0379 Flange Lock Nut 3/8-24 8 712-0429 Hex Lock Nut 5/16-18 9 714-0147 Cotter Pin 10 720-0313 Grip 11 720-0210A ...

  • White RB650 - page 18

    18 Model 458 18 17 24 19 27 46 45 12 26 9 6 1 8 25 14 28 20 2 11 44 4 22 23 16 5 21 7 13 15 3 40 43 42 41 39 32 33 31 30 29 36 34 37 37 38 35 10 ...

  • White RB650 - page 19

    19 Model 458 RE F . NO. PART NO. DESCRIPTION 1 686-0111 Belt Cover Brkt. Ass’y 2 710-0237 Hex Bolt 5/16-24 x .62" Lg. 3 710-0412 Hex Bolt 1/4-28 x .75" Lg. 4 710-0502A Hex Wash.T T -Sems Screw 3/8-16 x 1.250" Lg. 5 710-0591 Hex Bolt 3/8-24 x 1.00 6 710-0599 Hex Wash. Hd. S- Tap Scr. 7 710-0723 Hex Cap Screw 3/8-16 x 1.25 8 712-0266 ...

  • White RB650 - page 20

    20 MANU FA CTURER’S LIMITED WARRANTY FOR: For TWO YEARS from the date of retail purchase within the United States of America, its possessions and territories, White Outdoor Products Company will, at its option, repair or replace, for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship. This w ...

Manufacturer White Category Tiller

Documents that we receive from a manufacturer of a White RB650 can be divided into several groups. They are, among others:
- White technical drawings
- RB650 manuals
- White product data sheets
- information booklets
- or energy labels White RB650
All of them are important, but the most important information from the point of view of use of the device are in the user manual White RB650.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals White RB650, service manual, brief instructions and user manuals White RB650. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product White RB650.

Similar manuals

A complete manual for the device White RB650, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use White RB650 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of White RB650.

A complete White manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual White RB650 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the White RB650, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the White RB650, that we can find in the current document
3. Tips how to use the basic functions of the device White RB650 - which should help us in our first steps of using White RB650
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with White RB650
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of White RB650 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning White RB650?

Use the form below

If you did not solve your problem by using a manual White RB650, ask a question using the form below. If a user had a similar problem with White RB650 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)