English dropdown-ico

Manual Bryant 369RAN

12 pages 0.48 mb
Download

Go to site of 12

Summary
  • Bryant 369RAN - page 1

    NOTE: Read the entire instruction manual before starting the installation. TABLE OF CONTENTS SAFETY CONSIDERATIONS .....................................................1 INTRODUCTION ..........................................................................2 LOCATION .................................................................................. ...

  • Bryant 369RAN - page 2

    Understand the signal words DANGER, WARNING, and CAU- TION. These words are used with the safety-alert symbol. DAN- GER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies a hazard which could result in personal injury or death. CAUTION is used to identify unsafe practices which would result i ...

  • Bryant 369RAN - page 3

    CAUTION: For attic installation, it is important to keep insulation 12 in. or more away from any furnace open- ings. Some types of insulating materials may be combus- tibles. This furnace is approved for reduced clearances to combustible construction, therefore, it may be installed in a closet or similar enclosure. Since this unit may be installed ...

  • Bryant 369RAN - page 4

    In addition to air needed for combustion, process air shall be provided as required for: cooling of equipment or material, controlling dew point, heating, drying, oxidation or dilution, safety exhaust, and odor control. In addition to air needed for combustion, air shall be supplied for ventilation, including all air required for comfort and proper ...

  • Bryant 369RAN - page 5

    3. If combustion air is taken from outdoors through horizontal ducts, the openings and ducts MUST have at least 1 sq in. of free area per 2000 Btuh of the total input for all equipment within the confined space. (Refer to Table 6.) When ducts are used to supply air, they must be of the same cross sectional area as free area of openings to which the ...

  • Bryant 369RAN - page 6

    9. The chimney must extend 3 ft above highest point where it passes through the roof of a building and at least 2 ft higher than any portion of a building within a horizontal distance of 10 ft. It shall also be extended at least 5 ft above highest connected equipment flue collar. 10. Check local codes for any variance. FACTORY-BUILT CHIMNEYS Listed ...

  • Bryant 369RAN - page 7

    Remove burner by loosening mounting nuts and turn oil burner slightly counterclockwise to unlock the key hole burner flange. Prevent putting undue strain on burner wiring. (It may be neces- sary to disconnect burner wiring in some cases.) To reinstall burner, insert on the four burner studs on key hole burner flange and turn it clockwise to lock it ...

  • Bryant 369RAN - page 8

    Fig. 3 — Wiring Diagram (036105) A00420 — 8 — ...

  • Bryant 369RAN - page 9

    Fig. 4 — Wiring Diagram (060120) A00419 — 9 — ...

  • Bryant 369RAN - page 10

    d. If purging takes longer than 15 sec and no flame has been established, burner stops. Push reset button on front of primary control to restart burner. e. For detailed information on operation of primary control, refer to instructions included with furnace. After all the setup procedures mentioned above have been com- pleted, the burner should be ...

  • Bryant 369RAN - page 11

    WARNING: Failure to replace any heat exchanger gas- kets with new gaskets when any heat exchanger plates or covers are removed could lead to heat exchanger leakage, sooting, and/or a hazardous condition capable of causing bodily harm. This furnace should never be operated without an air filter. Disposable filters should be replaced at least once a ...

  • Bryant 369RAN - page 12

    A94328 SERVICE TRAINING Packaged Service Training programs are an excellent way to increase your knowledge of the equipment discussed in this manual, including: • Unit Familiarization • Maintenance • Installation Overview • Operating Sequence A large selection of product, theory, and skills programs is available, using popular video-based f ...

Manufacturer Bryant Category Furnace

Documents that we receive from a manufacturer of a Bryant 369RAN can be divided into several groups. They are, among others:
- Bryant technical drawings
- 369RAN manuals
- Bryant product data sheets
- information booklets
- or energy labels Bryant 369RAN
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bryant 369RAN.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bryant 369RAN, service manual, brief instructions and user manuals Bryant 369RAN. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bryant 369RAN.

Similar manuals

A complete manual for the device Bryant 369RAN, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bryant 369RAN by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bryant 369RAN.

A complete Bryant manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bryant 369RAN - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bryant 369RAN, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bryant 369RAN, that we can find in the current document
3. Tips how to use the basic functions of the device Bryant 369RAN - which should help us in our first steps of using Bryant 369RAN
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bryant 369RAN
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bryant 369RAN in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bryant 369RAN?

Use the form below

If you did not solve your problem by using a manual Bryant 369RAN, ask a question using the form below. If a user had a similar problem with Bryant 369RAN it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)